aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mediatek
Commit message (Collapse)AuthorAgeFilesLines
* kernel: Refresh kernel patchesHauke Mehrtens2022-07-191-3/+3
| | | | | | No manual changes needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt7622: remove 300 MHz from dtsJohn Audia2022-07-191-0/+25
| | | | | | | | | | | | | | | | | Due to the bug described here[1], remove the 300 MHz clock to avoid a low voltage condition that can cause a hang when rebooting the RT3200/E8450. This solution is probably better than the script-based work-around[2]. 1. https://forum.openwrt.org/t/belkin-rt3200-linksys-e8450-wifi-ax-discussion/94302/1490 2. https://github.com/openwrt/openwrt/pull/5025 Signed-off-by: John Audia <therealgraysky@proton.me> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Tested-by: John Audia <therealgraysky@proton.me> (cherry picked from commit d0d6b8e1833c587d0c50cac4f6324aa93b0bc8fc) [ fix the conflict by apply the patch to kernel 5.10 ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: Add missing mediatek configuration optionsHauke Mehrtens2022-07-061-2/+0
| | | | | | | | | | | | When building the mediatek/mt7629 target in OpenWrt 22.03 the kernel does not have a configuration option for CONFIG_CRYPTO_DEV_MEDIATEK. Add this option to the generic kernel configuration and also add two other configuration options which are removed when we refresh the mt7629 kernel configuration. Fixes: 2bea35cb55d7 ("mediatek: remove crypto-hw-mtk package") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit dcc0fe24ea216d32300c0f01c8879e586d89cc1e)
* mediatek: mt7622: fix white dome LED of UniFi 6 LRDaniel Golle2022-07-041-3/+1
| | | | | | | | | | | The recent differentiation between v1 and v2 of the UniFi 6 LR added support for the v2 version which has GPIO-controlled LEDs instead of using an additional microcontroller to drive an RGB led. The polarity of the white LED, however, was inverted and the default states didn't make a lot of sense after all. Fix that. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit f58e562b07803192d029a6be8c8c372e1ed11c68)
* mediatek: add Ubiquiti UniFi 6 LR v2 targetsHenrik Riomar2022-07-044-0/+239
| | | | | | | | | | | | | | | | Add targets: * Ubiquiti UniFi 6 LR v2 * Ubiquiti UniFi 6 LR v2 (U-Boot mod) This target does not have a RGB led bar like v1 did Used target/linux/ramips/dts/mt7621_ubnt_unifi.dtsi as inspiration The white dome LED is default-on, blue will turn on when the system is in running state Signed-off-by: Henrik Riomar <henrik.riomar@gmail.com> (cherry picked from commit 31d86a1a119265393db02aa66e6bc6518ee7b905)
* mediatek: new target ubnt_unifi-6-lr-v1-ubootmodHenrik Riomar2022-07-042-5/+6
| | | | | | | | | based on current ubnt_unifi-6-lr-ubootmod Signed-off-by: Daniel Golle <daniel@makrotopia.org> [added SUPPORTED_DEVICES for compatibility with existing setups] Signed-off-by: Henrik Riomar <henrik.riomar@gmail.com> (cherry picked from commit 5c8d3893a78fd81454930de30d90efaef99f8734)
* mediatek: new target mt7622-ubnt-unifi-6-lr-v1Henrik Riomar2022-07-045-31/+35
| | | | | | | | | | | | | Based on current mt7622-ubnt-unifi-6-lr, this is a preparation for adding a v2 version of this target * v1 - with led-bar * v2 - two simple GPIO connected LEDs (in later commits) Signed-off-by: Daniel Golle <daniel@makrotopia.org> [added SUPPORTED_DEVICES for compatibility with existing setups] Signed-off-by: Henrik Riomar <henrik.riomar@gmail.com> (cherry picked from commit 15a02471bb854245f8f94398c1e1d9ce29c2c341)
* mediatek: build ubnt-ledbar as a moduleChuanhong Guo2022-07-044-4/+18
| | | | | | | | | The config for LEDS_UBNT_LEDBAR doesn't stay in mt7629 kconfig because of its I2C dependency. Build it as a module and let buildroot handle this config option instead. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> (cherry picked from commit d9ea9c06e98b597174e0e94e0a13934637c0c03e)
* mediatek: remove crypto-hw-mtk packageEneas U de Queiroz2022-07-041-23/+0
| | | | | | | | The MediaTek's Crypto Engine module is only available for mt7623, in which case it is built into the kernel. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit 3f2d0703b60357e3ff1865783335be9f51528eb8)
* mediatek: mt7622: fix banana pi r64 wps buttonNick Hainke2022-07-041-0/+40
| | | | | | | | | | | | | | | | Fix the wps button to prevent wrongly detected recovery procedures. In the official banana pi r64 git the wps button is set to GPIO_ACTIVE_LOW and not GPIO_ACTIVE_HIGH. Import patch to fix on boot unwanted recovery entering: Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level - failsafe button wps was pressed - - failsafe - Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry-picked from commit 668619425526cb0d43f8536a2f6f15a6314e6553)
* mediatek/mt7629: Activate CONFIG_ARM_ARCH_TIMER_EVTSTREAMHauke Mehrtens2022-07-031-0/+2
| | | | | | | | | | The kernel configuration option CONFIG_MACH_MT7629 selects CONFIG_HAVE_ARM_ARCH_TIMER now. Handle this change in the config-5.10. This fixes some build problems. Fixes: 81530d69ef58 ("kernel: bump 5.10 to 5.10.121") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.125John Audia2022-06-272-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 53d99fedc7afd96adfb6f38fc939c9ee9981c2ed)
* mediatek: UniFi 6 LR: disable RTCDaniel Golle2022-06-271-0/+6
| | | | | | | | | There is not RTC battery connected to the SoC of the UniFi 6 LR board. Disable the RTC to prevent the system coming up with time set to 2000-01-01 00:00:00 after each reboot. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 692d87a27b44ac73c10cd511c00ee0bec1316d9f)
* mediatek: add patches for MT7622 WED (wireless ethernet dispatch)Felix Fietkau2022-05-066-105/+8
| | | | | | | This series also contains other improvement for hardware flow offload support Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 0f029b3d2b505b40aca9a24a002838ed1060f83d)
* mediatek: mt7622: remove '0x' prefix from pstore address in dtsDaniel Golle2022-04-231-1/+1
| | | | | | | | | | | | | | | Adresses of device tree nodes are typically noted without the '0x' prefix. While having the '0x' prefix doesn't hurt when using Linux, more recent versions of U-Boot will add a duplicate ramoops node as a simple string compare is used to check if the node is already present. Remove the '0x' prefix to avoid the kernel warning resulting from U-Boot adding a dupplicate pstore/ramoops node. See also https://lists.denx.de/pipermail/u-boot/2022-April/481810.html Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit fc245338d6e02e61fa7ecbd1a828aed97cdbef88)
* mediatek/mt7622: enable accelerated crypto driversEneas U de Queiroz2022-04-151-0/+10
| | | | | | | | | | Use ARMv8 Crypto Extensions for AES, ghash and sha256. This results in a 16 times speed gain in speed for aes-128-ctr, 17x in aes-128-gcm, and 9 times in sha256. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit c9c2b01b8441195807e8b492c7d3e385e6c6afdc)
* kernel: bump 5.10 to 5.10.110John Audia2022-04-101-1/+1
| | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Compile-/run-tested: ath79/generic (Archer C7 v2). Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebased in 22.03 tree] Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit b92ec82235b996ece32bc84af177adf1a4dcb90e)
* mediatek: Add support for Xiaomi Redmi Router AX6SRichard Huynh2022-03-215-2/+393
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also known as the "Xiaomi Router AX3200" in western markets, but only the AX6S is widely installation-capable at this time. SoC: MediaTek MT7622B RAM: DDR3 256 MiB (ESMT M15T2G16128A) Flash: SPI-NAND 128 MiB (ESMT F50L1G41LB or Gigadevice GD5F1GQ5xExxG) WLAN: 2.4/5 GHz 4T4R 2.4 GHz: MediaTek MT7622B 5 GHz: MediaTek MT7915E Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531B LEDs/Keys: 2/2 (Internet + System LED, Mesh button + Reset pin) UART: Marked J1 on board VCC RX GND TX, beginning from "1". 3.3v, 115200n8 Power: 12 VDC, 1.5 A Notes: U-Boot passes through the ethaddr from uboot-env partition, but also has been known to reset it to a generic mac address hardcoded in the bootloader. However, bdata is also populated with the ethernet mac addresses, but is also typically never written to. Thus this is used instead. Installation: 1. Flash stock Xiaomi "closed beta" image labelled 'miwifi_rb03_firmware_stable_1.2.7_closedbeta.bin'. (MD5: 5eedf1632ac97bb5a6bb072c08603ed7) 2. Calculate telnet password from serial number and login 3. Execute commands to prepare device nvram set ssh_en=1 nvram set uart_en=1 nvram set boot_wait=on nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit 4. Download and flash image On computer: python -m http.server On router: cd /tmp wget http://<IP>:8000/factory.bin mtd -r write factory.bin firmware Device should reboot at this point. Reverting to stock: Stock Xiaomi recovery tftp that accepts their signed images, with default ips of 192.168.31.1 + 192.168.31.100. Stock image should be renamed to tftp server ip in hex (Eg. C0A81F64.img) Triggered by holding reset pin on powerup. A simple implementation of this would be via dnsmasq's dhcp-boot option or using the vendor's (Windows only) recovery tool available on their website. Signed-off-by: Richard Huynh <voxlympha@gmail.com> (cherry picked from commit 9f9477b2751231d57cdd8c227149b88c93491d93)
* mediatek: Add GD5F1GQ5xExxG to mtk-snandRichard Huynh2022-03-211-0/+4
| | | | | | | Some units of the Xiaomi Redmi Router AX6S/Xiaomi Router AX3200 contain this part. Signed-off-by: Richard Huynh <voxlympha@gmail.com> (cherry picked from commit 4177de10df384e0106191e5b204b0aa11431fe77)
* kernel: move parser_trx patches of custom magic to genericINAGAKI Hiroshi2022-03-063-107/+0
| | | | | | | | This patch moves the patches of parser_trx in mediatek target to generic/backport-5.10 to use the changes from ramips target and backport the additional patch of the parser. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: add support for Ruijie RG-EW3200GX PROLanghua Ye2022-03-054-1/+370
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | X32 Pro is another product name for it in the Chinese market. Specifications: - SoC: MT7622B - RAM: 256MB - Flash: XMC XM25QH128C or Winbond WQ25Q128JVSQ 16MB SPI NOR - Ethernet: 5x1GbE - Switch: MT7531BE - WiFi: 2.4G: MT7622 5G: MT7915AN+MT7975AN - 3LEDs: System LED(blue) + Mesh LED(green) + Mesh LED(red) - 2Keys: Mesh button + Reset button - UART: Marked J19 on board. 3.3v, 115200n1 - Power: 12V 2.5A MAC addresses as verified by OEM firmware: use address source WAN *:F4 ethaddr@product_info LAN *:F5 5g *:F6 2g *:F7 Flash instruction: 1. Serve the initramfs.img using a TFTP server with address 10.10.10.3. 2. Interrupt the uboot startup process via UART. 3. Select "System Load Linux to SDRAM via TFTP" item. 4. (important) Back up firmware(mtd7) partitions with: dd if=/dev/mtd7 of=/tmp/firmware.bin and then download the firmware.bin image via SCP. 5. Flash the OpenWrt sysupgrade firmware. Recovery stock firmware: 1. Transfer the firmware.bin image to the device. 2. Flash the image with: mtd write firmware.bin firmware Signed-off-by: Langhua Ye <y1248289414@outlook.com>
* kernel: 5.10: remove CONFIG_DEVTMPFS{,_MOUNT} from kconfigsRui Salvaterra2022-03-011-2/+0
| | | | | | They are required for container support, but are handled in Config-kernel.in. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: allocate last level PTEs in high memoryRui Salvaterra2022-03-011-1/+1
| | | | | | | | | | Enable support for allocating user space page table entries in high memory [1], for the targets which support this feature. This saves precious low memory (permanently mapped, the only type of memory directly accessible by the kernel). [1] https://www.kernel.org/doc/html/latest/vm/highmem.html Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: mt7623: drop RAMFS_COPY_BINDaniel Golle2022-02-221-2/+0
| | | | | | | fwtool is now always part of the sysupgrade stage2 ramdisk, so drop the no longer needed RAMFS_COPY_BIN variable. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: drop RAMFS_COPY_BIN and RAMFS_COPY_DATADaniel Golle2022-02-221-2/+0
| | | | | | | | | Now that both, fw_printenv/fw_setenv and fwtool are always present during stage2 sysupgrade, we no longer need to list them in RAMFS_COPY_BIN and RAMFS_COPY_DATA in platform.sh. Drop both variables as they are now unneeded. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.100John Audia2022-02-114-5/+5
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.98John Audia2022-02-114-5/+5
| | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* mt7622: linksys-e8450: enable using mt7531 switch irqDaniel Golle2022-02-101-0/+4
| | | | | | | | Turns out the MT7531 switch IRQ line is connected to GPIO#53 just like on the BPi-R64, so this seems to be part of the reference design and will probably apply to most MT7622+MT7531 boards. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt7622: bpi-r64: enable using mt7531 switch irqDaniel Golle2022-02-101-0/+13
| | | | | | | | | | Now that we support link-state-change interrupts, wire up MT7531 IRQ line which is connected to GPIO#53 according to the schematics [1]. As a result, PHY state no longer needs to be polled on that board. [1]: https://forum.banana-pi.org/t/bpi-r64-mt7622-schematic-diagram-public/10118 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport MediaTek Ethernet PHY driverDENG Qingfang2022-02-092-0/+2
| | | | | | | | | | | | | | Add support for MediaTek Gigabit Ethernet PHYs found in MT7530 and MT7531. Fix some link up/down issues. The errornous check for the PHY mode which broke things with MT7531 has been removed as suggested by patch net: phy: mediatek: remove PHY mode check on MT7531 As a result, things are working fine now on MT7622+MT7531 as well. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* Revert "kernel: backport MediaTek Ethernet PHY driver"Hauke Mehrtens2022-02-052-2/+0
| | | | | | | | | | | | | | | | | | This reverts commit 8b4cba53a9402f44da2dced4a78ca065b15dca94. This broke the mt7530 on Linksys e8450 (mt7622) for me. [ 1.312943] mt7530 mdio-bus:00 lan1 (uninitialized): failed to connect to PHY: -EINVAL [ 1.320890] mt7530 mdio-bus:00 lan1 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 0 [ 1.331163] mt7530 mdio-bus:00 lan2 (uninitialized): failed to connect to PHY: -EINVAL [ 1.339085] mt7530 mdio-bus:00 lan2 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 1 [ 1.349321] mt7530 mdio-bus:00 lan3 (uninitialized): failed to connect to PHY: -EINVAL [ 1.357241] mt7530 mdio-bus:00 lan3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 2 [ 1.367452] mt7530 mdio-bus:00 lan4 (uninitialized): failed to connect to PHY: -EINVAL [ 1.375367] mt7530 mdio-bus:00 lan4 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 3 [ 1.385750] mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL [ 1.393575] mt7530 mdio-bus:00 wan (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport MediaTek Ethernet PHY driverDENG Qingfang2022-02-052-0/+2
| | | | | | | | | Add support for MediaTek Gigabit Ethernet PHYs found in MT7530. Fix some link up/down issues. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* mediatek: mt7623: simplify partition generationDaniel Golle2022-01-311-6/+1
| | | | | | | | | The two options 'emmc' and 'sdmmc' now became identical lines after introducing CONFIG_TARGET_ROOTFS_PARTSIZE. Remove the now useless if-clauses. Fixes: a40b4d335a ("mediatek: use CONFIG_TARGET_ROOTFS_PARTSIZE") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: u7623-02: enable early console also in legacy imageDaniel Golle2022-01-311-1/+1
| | | | | | | | Append 'earlycon=uart8250,mmio32,0x11004000' to the boot arguments embedded in device-tree in order to enable early console on the UniElec U7623 board when using the vendor/stock bootloader. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: include regular AHCI PCI driverDaniel Golle2022-01-251-1/+1
| | | | | | | | | The legacy image for the UniElec U7623-02 until now included kmod-ata-ahci-mtk. The MT7623 chip doesn't have that IP and that board uses a PCIe-connected AHCI controller for the SATA port and mSATA-pins of the mPCIe socket. Hence include kmod-ata-ahci instead. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: store random MAC address in U-Boot env on first bootDaniel Golle2022-01-231-0/+14
| | | | | | | For devboards without a MAC address assigned from factory, store the random MAC in U-Boot env on first boot to make it persistent. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-envtools: add configuration for UniElec U7623 boardDaniel Golle2022-01-231-5/+5
| | | | | | | Add U-Boot env settings to allow accessing the environment using fw_printenv and fw_setenv tools on the UniElec U7623 board. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: rework images for U7623-02 boardDaniel Golle2022-01-2313-313/+95
| | | | | | | | | | | | | | | | | | | | | | Users of older OpenWrt versions need sysupgrade using the *emmc.img.gz file once which will upgrade U-Boot and switch to the new image layout. Users of the vendor firmware need to first flash the legacy image to then sunsequently carry out a full-flash upgrade. Alternatively the board can also be flashed using MediaTek's proprietary SP Flash Tool. Configuration as well as persistent MAC address will be lost once at this point and you will have to redo (or restore) all configuration manually. To restore the previous persistent MAC address users may set it manually using fw_setenv ethaddr 00:11:22:33:44:55 For future upgrades once running OpenWrt past this commit, the usual *sysupgrade.itb file can be used. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add common DTS aliases for UniElec U7623 boardDaniel Golle2022-01-231-2/+8
| | | | | | | | * Use serial0 instead of serial2 for the only serial port * Add LED aliases * Add ethernet0 alias to inherit ethaddr from U-Boot env Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: use CONFIG_TARGET_ROOTFS_PARTSIZEDaniel Golle2022-01-233-5/+5
| | | | | | | Enable 'rootfs-part' feature to make the size of the partition of the production image configurable instead of hard-coding it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: Enable PCIe bus 0 (and thus SATA) on U7623David Woodhouse2022-01-141-0/+8
| | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* mediatek: rework and fix mt7622-rfb1-ubi supportFelix Fietkau2022-01-134-12/+15
| | | | | | | | Limit bmt remapping range to cover everything up to and including the kernel image, use the rest of the flash area for ubi. Fix partition table and sysupgrade support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: move mediatek BMT support patch to generic patchesFelix Fietkau2022-01-132-871/+36
| | | | | | | Preparation for supporting BMT on MT7621. Move source files to the files/ subdirectory in order to simplify maintenance Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: mt7623: Re-enable ARM arch timerDavid Woodhouse2022-01-101-0/+1
| | | | | | | | | CONFIG_ARM_ARCH_TIMER cannot be enabled in the config directly; it is only selected by CONFIG_HAVE_ARM_ARCH_TIMER. We need to enable the latter in our config. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Fixes: 4f1c5b01c1 ("mediatek: mt7623: backport musb, improve HDMI console")
* mediatek: mt7623: Disable power button reset for U7623-02 boardDavid Woodhouse2022-01-101-0/+4
| | | | | | | | | | | | The Unielec U7623 doesn't have a physical power button; I think it's hard wired so that it turns on automatically when power is applied (unlike the Banana Pi R2 which is a pain). So the 'reset on long press of power button' behaviour that we get when we enable the PMIC keyboard driver is kind of unhelpful. Disable it. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Fixes: 0d3f3323a2 ("mediatek: mt7623: enable more hardware features")
* mediatek mt7622: fix 300mhz typo in dtsFritz D. Ansel2022-01-091-0/+27
| | | | | | | | | | | | | | The lowest frequency should be 300MHz, since that is the label assigned to the OPP in the mt7622.dtsi device tree, while there is one missing zero in the actual value. To be clear, the lowest frequency should be 300MHz instead of 30MHz. As mentioned @dangowrt on the OpenWrt forum there is no benefit in leaving 30MHz as the lowest frequency. Signed-off-by: Jip de Beer <gpk6x3591g0l@opayq.com> Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>
* mediatek: Clause-45 MDIO patch accepted upstreamDaniel Golle2022-01-056-255/+310
| | | | | | | To easy future maintainance, replace the local patch with what has been accepted into net-next and is likely to end up in Linux 5.17. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: let mtk_eth_soc MAC announce 2500Base-T modeDaniel Golle2022-01-051-0/+10
| | | | | | | | To allows Ethernet phys supporting 2500Base-T mode to announce that speed, enable the corresponding bit in mtk_eth_soc driver. This should hopefully unlock 2500Base-T speed on the UniFi 6 LR. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: yet again, replace patch with updated pending patchDaniel Golle2021-12-272-37/+125
| | | | | | | | | Upon comment of Russell King ('Oh no, not this "-1 disease" again.') clean up mdio read and write return type and value in mtk_eth_soc driver and also use appropriate return values for bus-busy-timeout- errors in newly added Clause 45 access code. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: replace patch with version sent upstreamDaniel Golle2021-12-272-94/+166
| | | | | | | | | Replace recently added patch 701-net-ethernet-mtk_eth_soc-add-support-for-clause-45-mdio.patch with version sent upstream 701-net-ethernet-mtk_eth_soc-implement-Clause-45-MDIO-access.patch Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 04:36:42 +0000