aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mediatek/mt7622
Commit message (Collapse)AuthorAgeFilesLines
* mediatek: set new compat version if booted on R64 and R3Daniel Golle2023-06-091-0/+10
| | | | | | | | | | | | | | | | | | If the board comes up with OpenWrt that means that the bootloader is recent enough and knows about the new device tree overlays. Using /etc/board.d/ is not enough in this case because it doesn't overwrite existing configuration which may exist (and is fine to exist) if the user updated with 'sysupgrade -F *.itb' and has kept configuration. They would still need to manually set compat_version even though the fact that the bootloader env has been updated can be implied by the fact that the system has started. Hence we can always set compat_version=1.1 for those two boards using uci-defaults. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 25e27c4af3f1de872aadbaada434437cba3b0a75)
* mediatek: use updated device tree overlay mechanism for BPi-R64Daniel Golle2023-06-091-0/+15
| | | | | | | Use new device tree overlay mechanism for the BananaPi BPi-R64 board. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 34bb33094a5e49c727b76b20394d252f3e2ba70d)
* mediatek: filogic: add driver for Richtek RT5190A regulatorDaniel Golle2023-05-241-0/+1
| | | | | | | | | The Richtek RT5190A is used on the MT7988 reference board. Backport and enable the driver on the filogic subtarget, so we can support cpufreq on the MT7988 reference board. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit a3cf3e2c489d5b6f534d1b4d6f7b462f81c9c141)
* mediatek: add driver for built-in 2.5G Ethernet PHYDaniel Golle2023-05-241-0/+1
| | | | | | | | | Add driver for the built-in 2.5G Ethernet PHY found in the MT7988 SoC. To function the PHY also needs firmware files which have not yet been published via linux-firmware. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit ef2a831dabacfda6c36c79b8f963b5fdd9b2d080)
* mediatek: update pending SoC Ethernet PHY driverDaniel Golle2023-05-241-1/+1
| | | | | | | | Update driver for MediaTek's built-in Gigabit Ethernet PHYs which can be found in the MT7981 and MT7988 SoCs. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 987a0b2b3011a9e5ee3e4120b068fb2f113628a7)
* generic: mt7530: backport support for the MT7988 built-in switchDaniel Golle2023-05-241-0/+2
| | | | | | | | | | | | | | | | | Backport commits adding support for the MT7988 built-in switch to the mt7530 driver. This change results in the Kconfig symbol NET_DSA_MT7530 to be extended by NET_DSA_MT7530_MDIO (everything formally covered by NET_DSA_MT7530) and NET_DSA_MT7530_MMIO (a new driver for the MMIO-connected built-in switch of the MT7988 SoC). Select NET_DSA_MT7530_MDIO for all targets previously selecting NET_DSA_MT7530, with the exception of mediatek/filogic which also selects NET_DSA_MT7530_MMIO. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 958fdf36e35c814eb83faf2c39db4ca379c921b5)
* generic: add support for MediaTek NETSYS v3Daniel Golle2023-05-241-0/+1
| | | | | | | | In order to support Ethernet on the MT7988 SoC add support for NETSYS v3 as well as new paths and USXGMII SerDes to the mtk_eth_soc driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 6983a215d9d1966f95bc5b1c0045c200948b2079)
* mediatek: add mt7988 pinctrl driver supportSam Shih2023-05-241-0/+1
| | | | | | | | This adds provisional pinctrl driver support for the MediaTek MT7988 SoC. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 9e6a7e808f2e9dd02733ccc41827940fb421091d)
* mediatek: add mt7988 clock drivers supportSam Shih2023-05-241-0/+1
| | | | | | | | This adds clock drivers for the MediaTek MT7988 SoC Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit b33c1858767e5109913ac2195ec2b2b8ef0e726a)
* kernel: enable (ARM|ARM64)_MODULE_PLTS in generic configTony Ambardar2023-05-241-1/+0
| | | | | | | | | | | | | | | | | | | | | This allows loading modules with large memory requirements, recently needed while testing on armvirt/32. Past forum discussions [1] and bug reports [2] also raised this and the ipq806x target already set it in response [3]. Given this increases kernel image size by only ~1KB, is generally useful on multi-platform kernels, and enabled by default on upstream arm32 Linux, add it to the generic config. The setting has similar utility on arm64, is a requirement for KASLR, and already enabled on most OpenWrt aarch64 targets, so pull this into the top-level generic config. [1]: https://forum.openwrt.org/t/vmap-allocation-for-size-442368-failed-use-vmalloc-size-to-increase-size/34545/7 [2]: https://github.com/openwrt/openwrt/issues/8282 [3]: f81e148eb6 ("ipq806x: update 4.19 kernel config"). Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit c2d194a34eb1a62a610f0437287db6c3eca64d5a) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: fix handling of CONFIG_DYNAMIC_DEBUGTony Ambardar2023-05-031-1/+0
| | | | | | | | | | Since CONFIG_DYNAMIC_DEBUG is already managed via the KERNEL_DYNAMIC_DEBUG setting in Config-kernel.in (default N), remove or disable it in target configs which unconditionally enable it, along with the related setting CONFIG_DYNAMIC_DEBUG_CORE. This saves several KB in the kernels for ipq40xx, ipq806x, filogic, mt7622, qoriq, and sunxi. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: Deactivate CONFIG_COMPATHauke Mehrtens2023-04-291-4/+0
| | | | | | | | | | | | | | This deactivates the CONFIG_COMPAT kernel option. With CONFIG_COMPAT the kernel will provide syscall interfaces for arm32 binaries in addition to the interfaces needed for arm64 binaries. In OpenWrt the complete userspace is compiled for this specific architecture and support for 32 bit ARM applications is not needed. This reduces the size and the attack surface for the systems. On all other targets CONFIG_COMPAT is already deactivated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_ARM64_SW_TTBR0_PANHauke Mehrtens2023-04-291-1/+0
| | | | | | | | | | | | | This activates the CONFIG_ARM64_SW_TTBR0_PAN option for all arm64 kernels by default. The CONFIG_ARM64_SW_TTBR0_PAN option prevents the kernel form accessing user space memory directly. This makes it harder to exploit the kernel. This is activated by default and was already activate on all other arm64 targets before. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: add support for built-in GE PHYs of newer SoCsDaniel Golle2023-03-271-0/+1
| | | | | | | | | | | MT7981 and the upcoming MT7988 have built-in Gigabit Ethernet PHYs. While they share some design properties with the PHYs present in MT753x, they do need calibration data from the SoC's efuse. Add driver to support them. Upstreaming it is planned, but there are still some ongoing discussions with MediaTek. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport pinctrl driver for MT7981 SoCDaniel Golle2023-03-271-0/+1
| | | | | | | Backport the pinctrl driver for the MT7981 SoC. The driver has also been submitted upstream and is part of Linux 6.3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport clk driver for MT7981 SoCDaniel Golle2023-03-271-0/+1
| | | | | | | Backport driver for common clocks in MT7981 SoC. The driver has also been submitted upstream and became part of Linux 6.3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Netgear WAX206Marcel Ziswiler2023-02-183-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * SoC: MediaTek MT7622BV * RAM: DDR3 512 MiB (Nanya NT5CC256M16ER-EK) * Flash: SPI-NAND 256 MiB (Toshiba TC58CVG1S3HRAIJ) * Wi-Fi 2.4/5 GHz 4T4R: * 2.4 GHz: MediaTek MT7622BV * 5 GHz: MediaTek MT7915AN/MT7975AN * Ethernet: 4x 10/100/1000 Mbps LAN, 1x 10/100/1000/2500 Mbps WAN (Realtek RTL8221B PHY) * Switch: MediaTek MT7531AE * LEDs/Keys: 8/1 (Power, Internet, LAN1, LAN2, LAN3, LAN4, Wifin and Wifia dual-colour LEDs + Reset pin) * UART: Marked J19 on board VCC GND TX RX, beginning from "1". 3.3v, 115200n8 * Power: 12 VDC, 2.5 A Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * U-Boot allows booting an initramfs image via TFTP as follows: setenv ipaddr 192.168.1.1 setenv serverip 192.168.1.100 tftpboot openwrt-mediatek-mt7622-netgear_wax206-initramfs-recovery.itb bootm Known Limitations: * The 2.5G WAN port labeled 'wan' only works for speeds up to 1G at the moment. If connected to a multi-gig port the speed has to be manually set to 1G/full either for the switch port or in OpenWrt. For example add the following to /etc/rc.local to set it on boot: /usr/sbin/ethtool -s wan speed 1000 duplex full Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. References to WAX206 GPL source: https://www.downloads.netgear.com/files/GPL/WAX206_V1.0.4.0_Source.rar * openwrt/target/linux/mediatek/dts/mt7622-netgear-wax206.dts DTS file for this device. * openwrt/target/linux/mediatek/image/mt7622.mk Image creation code for this device Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [fix WAN port (1G only), adjust partition layout, adjust image creation] Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
* treewide: replace wpad-basic-wolfssl defaultRosen Penev2023-02-041-1/+1
| | | | | | | The newly merged mbedtls backend is smaller and has fewer ABI related issues than the wolfSSL one. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mediatek: fix wrong return code in platform_check_image()Chen Minqiang2023-01-291-0/+1
| | | | | | Ensure that the platform_check_image() function returns an error code. Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* mediatek: mt7622: fix sysupgrade on MMC on BPi-R64Daniel Golle2023-01-161-0/+1
| | | | | | | | A previous attempt to simplify things went wrong and now sysupgrade is broken on this device. Fix that. Fixes: d640cbac0e ("mediatek: mt7622: don't rely on existing image for sysupgrade") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: add stand-alone MT7622 firmware packageShiji Yang2023-01-071-1/+1
| | | | | | | | | Add a separate firmware package to avoid installing the MT7615 firmware on all MT7622 target devices by default. Now we only add MT7615 firmware packages for devices that use MT7615E. This commit also removes the explicit dependency on kmod-mt7615e to refine the package dependency. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* treewide: update NVMEM symbolsRafał Miłecki2023-01-071-1/+1
| | | | | Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mediatek: add support for reyee AX3200-E5Alex Hansen2022-12-062-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is yet another model of the Ruijie RG-EW3200GX PRO with a slightly different flash layout, install process is the same. Specifications: SoC: MT7622B RAM: 256MB Flash: XMC XM25QH128C or Winbond WQ25Q128JVSQ 16MB SPI NOR Ethernet: 5x1GbE Switch: MT7531BE WiFi: 2.4G: MT7622 5G: MT7915AN+MT7975AN 3LEDs: System LED(blue) + Mesh LED(green) + Mesh LED(red) 2Keys: Mesh button + Reset button UART: Marked J19 on board. 3.3v, 115200n1 Power: 12V 2.5A Flash instruction: 1. Serve the initramfs.img using a TFTP server with address 10.10.10.3. 2. Interrupt the uboot startup process via UART. 3. Select "System Load Linux to SDRAM via TFTP" item. 4. (important) Back up firmware(mtd7) partitions with: dd if=/dev/mtd7 of=/tmp/firmware.bin and then download the firmware.bin image via SCP. 5. Flash the OpenWrt sysupgrade firmware. Recovery stock firmware: 1. Transfer the firmware.bin image to the device. 2. Flash the image with: mtd write firmware.bin firmware Signed-off-by: Alex Hansen <mralexh123@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: set persistent wifi mac for bpi-r64 and bpi-r3Daniel Golle2022-11-241-0/+3
| | | | | | | Use persistent MAC address for the built-in wireless interfaces of the BPi-R64 and BPi-R3 development boards. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic configAleksander Jan Bajkowski2022-10-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Endianness depends on CPU architecture. CONFIG_CPU_(BIG/LITTLE)_ENDIAN should be enabled on target or subtarget based on SoC architecture. Fixes warning: $ make kernel_oldconfig CONFIG_TARGET=subtarget ... .config:1008:warning: override: CPU_LITTLE_ENDIAN changes choice state .... Summary: - ARC - only the CONFIG_CPU_BIG_ENDIAN symbol is defined for this architeture. If it is disabled then the processor operates in LITTLE_ENDIAN mode (default), - ARM32 - CONFIG_CPU_LITTLE_ENDIAN symbol available since kernel 5.19. This option should be enabled after OpenWRT moves to kernel 6.x. After refreshing the kernel, the symbol disappears, - ARM64 - enabled CONFIG_CPU_LITTLE_ENDIAN, - MIPS - enabled relevant symbols, - POWERPC - enabled CONFIG_CPU_BIG_ENDIAN, - UML - Symbols are not defined for this architecture, - X86 - always little endian. Symbols are not defined for this architecture. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* mt7622: switch default CPU governor to ondemandJohn Audia2022-10-201-1/+1
| | | | | | | | | | | | | | | | | | The most common CPU governor in the OpenWRT project is currently ondemand (see below). Switch mt7622 over to it as well. Audit the code by running the following and then analyzing the results: find -name 'config-5.*' -print0 | xargs -0 grep 'CONFIG_CPU_FREQ_DEFAULT_GOV.*=y' ondemand: 16 performance: 5 schedutil: 5 userspace: 2 Build system: x86_64 Build-tested: ramips/mt7621 Signed-off-by: John Audia <graysky@archlinux.us>
* mediatek: mt7622: don't rely on existing image for sysupgradeDaniel Golle2022-10-191-2/+2
| | | | | | | | Don't reply on mapped rootfs partition but rather just take what ever has been set to the kernel cmdline root= parameter as a hint to decide which media to install sysupgrade to on the BananaPi BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: kernel config fixesDaniel Golle2022-10-191-1/+1
| | | | | | | | | | | * remove orphaned Kconfig symbol now that CONFIG_IIO is no longer selected after commit ef8b935c95 ("mediatek: clean up mt7622 kernel config") * select UBI fast-map feature to decrease boot time and keep the number of spare blocks required in sync with U-Boot's expectations (we got fast-map enabled in U-Boot) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: clean up mt7622 kernel configFelix Fietkau2022-10-141-5/+2
| | | | | | Remove a few unused options to reduce kernel size Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove target specific CONFIG_IKCONFIG linesFelix Fietkau2022-10-141-2/+0
| | | | | | Use generic configuration for this feature Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: fill wlan device entries in board.json on mt7622Felix Fietkau2022-10-141-0/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: fix Unifi 6LR network configStijn Tintel2022-09-201-2/+1
| | | | | | | | | | | | | | | | When the v1 and v2 variants of the U6LR were introduced, the board network config was not adapted to the new device names. Due to this, the wrong network config is applied during initial boot. The resulting config has lan, wan and a switch, while this device only has a single ethernet interface without a switch. Fix this by using a wildcard that matches all the variants. Fixes: 15a02471bb85 ("mediatek: new target mt7622-ubnt-unifi-6-lr-v1") Fixes: 5c8d3893a78f ("mediatek: new target ubnt_unifi-6-lr-v1-ubootmod") Fixes: 31d86a1a1192 ("mediatek: add Ubiquiti UniFi 6 LR v2 targets") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: build USB XHCI support as moduleDaniel Golle2022-09-141-5/+0
| | | | | | | | Instead of always including the XHCI driver in the kernel on all MediaTek boards, selectively include the kernel module only on boards which actually make use of USB functionality. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: unset CONFIG_CMDLINE_OVERRIDE for all targets but mt7629Daniel Golle2022-09-121-0/+1
| | | | | | | | | | The newly introduced config symbol CONFIG_CMDLINE_OVERRIDE is only set for mt7629 for now which breaks automated build on all other mediatek subtargets. Make sure the symbol is configured as 'is not set' for all remaining subtargets. Fixes: c27279dc26 ("mediatek: add support for ipTIME A6004MX Add basic support for ipTIME A6004MX.") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add mt7986 soc support to the targetSam Shih2022-08-281-0/+2
| | | | | | | | | It will be supported by the new filogic subtarget Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: use variable sector size for spi-norDaniel Golle2022-08-281-0/+1
| | | | | | Make use of minor sector size (4k) on supported SPI-NOR flash chips. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: Activate CONFIG_GPIOLIB in generic configurationHauke Mehrtens2022-08-101-1/+0
| | | | | | | | All targets expect the malta target already activate the CONFIG_GPIOLIB option. Move it to generic kernel configuration and also activate it for malta. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-241-0/+2
| | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mediatek: mt7622: add support for ELECOM WRC-X3200GST3INAGAKI Hiroshi2022-05-212-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WRC-X3200GST3 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on MT7622B. Specifications: - SoC : MediaTek MT7622B - RAM : DDR3 512 MiB (Nanya NT5CC256M16ER-EK) - Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG) - WLAN : 2.4/5 GHz 4T4R - 2.4 GHz : MediaTek MT7622B (SoC) - 5 GHz : MediaTek MT7915A - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7531 - LEDs/Keys : 6x/4x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J19: 3.3V, GND, TX, RX from power jack side - 115200n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-X3200GST3 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC Addresses: LAN : 04:AB:18:xx:xx:77 (Factory, 0x7FFF4 (hex)) WAN : 04:AB:18:xx:xx:78 (Factory, 0x7FFFA (hex)) 2.4 GHz: 04:AB:18:xx:xx:79 (Factory, 0x4 (hex)) 5 GHz : 04:AB:18:xx:xx:7A (none) Note: - currently, there is no "phy1tpt" trigger for 5 GHz wlan (MT7915) in "trigger" file of LEDs, use "phy1radio" trigger instead Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* mediatek: build ubnt-ledbar as a moduleChuanhong Guo2022-04-301-1/+0
| | | | | | | | The config for LEDS_UBNT_LEDBAR doesn't stay in mt7629 kconfig because of its I2C dependency. Build it as a module and let buildroot handle this config option instead. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: remove left-overs from Linux 5.10Daniel Golle2022-04-301-465/+0
| | | | | | | | Remove patches and configuration for Linux 5.10 which have been left in the tree despite the target having been switched to Linux 5.15. Fixes: c283defa88 ("mediatek: switch to 5.15") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: enable multi-core schedulingDaniel Golle2022-04-301-0/+1
| | | | | | | | Set CONFIG_SCHED_MC in config-5.15 to have make the scheduler aware of shared caches. Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add an upstreamed spi-nand driverChuanhong Guo2022-04-281-2/+2
| | | | | | | This patch implements the spi-nand controller driver as an ECC-capable spi-mem controller to use the upstream SPI-NAND driver. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek/mt7622: enable accelerated crypto driversEneas U de Queiroz2022-04-112-0/+20
| | | | | | | | | Use ARMv8 Crypto Extensions for AES, ghash and sha256. This results in a 16 times speed gain in speed for aes-128-ctr, 17x in aes-128-gcm, and 9 times in sha256. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: move some symbols to generic configAleksander Jan Bajkowski2022-04-091-6/+0
| | | | | | | | | | | | | | | | | | | This commit add some enabled symbols to generic config. LTO is only supported by clang compiler and therefore should be disabled in the generic config instead of duplicating this symbol in each target. CONFIG_LTO_NONE do this job. The second group of symbols is enabled by the options available in the generic config and is therefore added here: * CONFIG_AF_UNIX_OOB is selected by CONFIG_NET && CONFIG_UNIX, * CONFIG_BINARY_PRINTF is selected by CONFIG_BPF_SYSCALL, * CONFIG_NET_SOCK_MSG is selected by CONFIG_BPF_SYSCALL && CONFIG_NET. The other symbols are disabled and should be in the generic config. This commit also removes these symbols from subtargets. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* mediatek: add patches for 5.15 and kernel config for mt7622Felix Fietkau2022-03-271-0/+455
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: Add support for Xiaomi Redmi Router AX6SRichard Huynh2022-03-203-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also known as the "Xiaomi Router AX3200" in western markets, but only the AX6S is widely installation-capable at this time. SoC: MediaTek MT7622B RAM: DDR3 256 MiB (ESMT M15T2G16128A) Flash: SPI-NAND 128 MiB (ESMT F50L1G41LB or Gigadevice GD5F1GQ5xExxG) WLAN: 2.4/5 GHz 4T4R 2.4 GHz: MediaTek MT7622B 5 GHz: MediaTek MT7915E Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531B LEDs/Keys: 2/2 (Internet + System LED, Mesh button + Reset pin) UART: Marked J1 on board VCC RX GND TX, beginning from "1". 3.3v, 115200n8 Power: 12 VDC, 1.5 A Notes: U-Boot passes through the ethaddr from uboot-env partition, but also has been known to reset it to a generic mac address hardcoded in the bootloader. However, bdata is also populated with the ethernet mac addresses, but is also typically never written to. Thus this is used instead. Installation: 1. Flash stock Xiaomi "closed beta" image labelled 'miwifi_rb03_firmware_stable_1.2.7_closedbeta.bin'. (MD5: 5eedf1632ac97bb5a6bb072c08603ed7) 2. Calculate telnet password from serial number and login 3. Execute commands to prepare device nvram set ssh_en=1 nvram set uart_en=1 nvram set boot_wait=on nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit 4. Download and flash image On computer: python -m http.server On router: cd /tmp wget http://<IP>:8000/factory.bin mtd -r write factory.bin firmware Device should reboot at this point. Reverting to stock: Stock Xiaomi recovery tftp that accepts their signed images, with default ips of 192.168.31.1 + 192.168.31.100. Stock image should be renamed to tftp server ip in hex (Eg. C0A81F64.img) Triggered by holding reset pin on powerup. A simple implementation of this would be via dnsmasq's dhcp-boot option or using the vendor's (Windows only) recovery tool available on their website. Signed-off-by: Richard Huynh <voxlympha@gmail.com>
* mediatek: add support for Ruijie RG-EW3200GX PROLanghua Ye2022-03-052-1/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | X32 Pro is another product name for it in the Chinese market. Specifications: - SoC: MT7622B - RAM: 256MB - Flash: XMC XM25QH128C or Winbond WQ25Q128JVSQ 16MB SPI NOR - Ethernet: 5x1GbE - Switch: MT7531BE - WiFi: 2.4G: MT7622 5G: MT7915AN+MT7975AN - 3LEDs: System LED(blue) + Mesh LED(green) + Mesh LED(red) - 2Keys: Mesh button + Reset button - UART: Marked J19 on board. 3.3v, 115200n1 - Power: 12V 2.5A MAC addresses as verified by OEM firmware: use address source WAN *:F4 ethaddr@product_info LAN *:F5 5g *:F6 2g *:F7 Flash instruction: 1. Serve the initramfs.img using a TFTP server with address 10.10.10.3. 2. Interrupt the uboot startup process via UART. 3. Select "System Load Linux to SDRAM via TFTP" item. 4. (important) Back up firmware(mtd7) partitions with: dd if=/dev/mtd7 of=/tmp/firmware.bin and then download the firmware.bin image via SCP. 5. Flash the OpenWrt sysupgrade firmware. Recovery stock firmware: 1. Transfer the firmware.bin image to the device. 2. Flash the image with: mtd write firmware.bin firmware Signed-off-by: Langhua Ye <y1248289414@outlook.com>
* kernel: 5.10: remove CONFIG_DEVTMPFS{,_MOUNT} from kconfigsRui Salvaterra2022-03-011-2/+0
| | | | | | They are required for container support, but are handled in Config-kernel.in. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: mt7622: drop RAMFS_COPY_BIN and RAMFS_COPY_DATADaniel Golle2022-02-221-2/+0
| | | | | | | | | Now that both, fw_printenv/fw_setenv and fwtool are always present during stage2 sysupgrade, we no longer need to list them in RAMFS_COPY_BIN and RAMFS_COPY_DATA in platform.sh. Drop both variables as they are now unneeded. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 01:42:19 +0000