aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
Commit message (Collapse)AuthorAgeFilesLines
...
* lantiq: do not "local" variables outside of a functionMartin Blumenstingl2016-09-242-5/+5
| | | | | | | | | Older busybox versions allowed using the local keyword outside of functions, whereas 1.25.0 (which was introduced in 06fa1c46fc32) do not allow this anymore (leading to the following error when executing the script: "file: local: line nn: not in a function"). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: update kernel 4.4 to version 4.4.20Álvaro Fernández Rojas2016-09-151-1/+1
| | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on brcm2708 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: Backport pending appended DTB handling patchesDaniel Gimpelevich2016-09-121-0/+49
| | | | | | | | | | Backport patches from upstream Linux kernel which are making the kernel stores the appended dtb not in the same resisters as defined in the UHI specification, use a separate variable on MIPS. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> [some modifications] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* cleanup ucidef_set_interface* usageMathias Kresin2016-09-101-2/+2
| | | | | | | | - quote the interface name - remove call of not existing function - remove the proto if it's the default proto Signed-off-by: Mathias Kresin <dev@kresin.me>
* use immediate set in target MakefilesMathias Kresin2016-09-101-1/+1
| | | | | | | | No functional change, it's just to have the same style everywhere. This way I don't need to use any regex magic to extract all subtargets for compile tests. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: board.d: apply alphabetical orderMathias Kresin2016-09-101-43/+43
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: board.d: cleanup default switch configMathias Kresin2016-09-101-32/+19
| | | | | | | | | | | | | | | | Add or fix the physical port number of switch ports to allow LuCI to display the ports in physical order. Remove the physical port number in case bridge port and physical port order are the same. Reorder the ucidef_add_switch parameter to be aligned with the switch port number. Remove board settings which are covered by the default case and remove comments. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: enable cpu temp driver for more tested boardsMathias Kresin2016-09-102-1/+9
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: use k as unit suffix for blocksizeMathias Kresin2016-09-041-2/+2
| | | | | | | Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ath5k EEPROM loadingMathias Kresin2016-08-241-9/+27
| | | | | | | | | | With 12fe4b579801ea812b64fc7e689716cd39c895ec I switched the ath5k eeprom extraction to an alternate code path. Unfortunately this code seams to be broken since ages and broke the ath5k EEPROM extraction. Reported-by: Mohammed Berdai <mohammed.berdai@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> Acked-by: John Crispin <john@phrozen.org>
* lantiq: switch from 34k to 24kJonas Gorski2016-08-233-3/+3
| | | | | | | GCC treats 24kc and 34kc exactly the same and will generate identical code, so there is no need to tune to 34kc instead of 24kc. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* lantiq: fix building AVM/EVA sysupgrade images on NOR devicesMartin Blumenstingl2016-08-221-1/+3
| | | | | | | | | | | | Device/AVM unconditionally inherits Device/NAND, which changes the sysupgrade image to sysupgrade-tar (instead of a "raw" sysupgrade image as used in the Device/Default template). This moves the Device/NAND call to the FRITZ3370 device definition, as this is the only AVM/EVA device that uses NAND. Additionally we have to define the IMAGE_SIZE for the AVM/EVA NOR devices to ensure that the images are not discarded. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: generate switch configuration for BTHOMEHUBV2B.Sigurd Hogsbro2016-08-201-1/+8
| | | | | | | Split from HH3A as it appears to have a different switch. https://en.wikipedia.org/wiki/BT_Home_Hub#Models_and_technical_specifications Signed-off-by: Sigurd Hogsbro <sigurd@hogsbro.org>
* lantiq/xrx200-net: Add support for eth0 as WAN interfaceMartin Schiller2016-08-151-1/+1
| | | | | | | | Use priv->wan instead of priv->id as indicator if packets should go to the Ethernet WAN group (DPID=1) or not (DPID=0). This way, it's independant of interface names or indexes. Signed-off-by: Martin Schiller <mschiller@tdt.de>
* lantiq: add kmod-ledtrig-usbdev to device packages which have usb ledMatti Laakso2016-08-151-5/+5
| | | | | | | | By default USB LEDs are associated with usbdev trigger. However, not all devices which have USB LEDs have kmod-ledtrig-usbdev in their list of default packages. Add it to the relevant devices. Signed-off-by: Matti Laakso <matti.laakso@outlook.com>
* lantiq/xrx200-net: add interrupt for second DMA TX channel to vr9.dtsiMartin Schiller2016-08-151-1/+1
| | | | Signed-off-by: Martin Schiller <mschiller@tdt.de>
* lantiq/xrx200-net: fix "tx ring full" error by introducing second DMA TX channelMartin Schiller2016-08-151-17/+31
| | | | | | | | | | With an own DMA TX channel for each network device (eth0 + eth1) there won't be any "tx ring full" errors any more. This patch also move the spinlocks to the channel level instead of locking the whole xrx200_hw structure. Signed-off-by: Martin Schiller <mschiller@tdt.de>
* lantiq: fix some ethernet driver SMP issuesFelix Fietkau2016-08-111-10/+16
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: enable cpu temp driver for selected boardsMathias Kresin2016-08-103-0/+12
| | | | | | | | According to the author of the cpu temp driver, not all xrx200 boards have a cpu temperature sensor. For that reason enable the sensor only for tested boards. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: board.d: set lan mac address only where necessaryMathias Kresin2016-08-101-16/+8
| | | | | | | Do not set the lan mac address for boards which having the lan mac address already set in device tree source file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: drop duplicate and now unused "lantiq, eth-mac" bindingMathias Kresin2016-08-101-52/+1
| | | | | | | | | | | | The device tree binding and the associated code duplicates functionality already patched into the etop driver. The compatible string isn't used any more. Therefore the whole code can be dropped. The "mac-increment" property allowed to increment a mac address received via kernel cmdline. This functionality isn't used by any device and should be added as etop driver device tree property if required again. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: use the etop driver DT bindings onlyMathias Kresin2016-08-1014-81/+25
| | | | | | | Use the generic mtd-mac-address dts property to get a mac address from flash instead of the lantiq specific one. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix mac address incrementsMathias Kresin2016-08-1012-12/+1
| | | | | | | | | | | | Use the same mac address increment in device tree source file and userspace. Don't add a mac address increment to either the only mtd mac-address or to all mac-addresses. Fix a typo in the TDW89X0.dtsi file to add an increment. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: drop orphaned eeprom-handling code branchesMathias Kresin2016-08-101-97/+71
| | | | | | | | | | All device tree nodes are using the named properties now and the code path handling the reg property isn't required any more. The code related to the ath,eep-flash property has been reformatted to be better readable. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: use ath, eep-flash/mac-offset for ath eep nodesMathias Kresin2016-08-105-15/+15
| | | | | | | No functional change, just easier to get what's the purpose of the hex values. Signed-off-by: Mathias Kresin <dev@kresin.me>
* Revert "kernel: remove long obsolete gpio spi controller driver patch"Felix Fietkau2016-08-041-3/+3
| | | | This reverts commit 9e62a7668c4085563a907da51a08819c88d04f33.
* kernel: remove long obsolete gpio spi controller driver patchFelix Fietkau2016-08-041-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: add cpu temperatur sensor driver for xrx200Florian Eckert2016-08-033-0/+171
| | | | Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
* build: remove MIPS dsp/dsp2 CPU_SUBTYPEFelix Fietkau2016-08-033-3/+0
| | | | | | | There does not seem to be any meaningful difference in generated code. This will save some time and space on snapshot builds Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: enable missing ath10k firmware for BT Home Hub 5AFelix Fietkau2016-08-011-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image: add a helper variable for getting kernel/rootfs from within image ↵Felix Fietkau2016-07-312-5/+5
| | | | | | Build/* templates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-291-1/+1
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* lantiq: fix switch configuration for EASY80920Hauke Mehrtens2016-07-284-24/+27
| | | | | | | | The device tree description misses some Ethernet ports and there was no model specified for this board. In addition there was no switch specific default configuration created. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix WBMR-300HPD switch port assignmentFelix Fietkau2016-07-281-4/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix image creation of P2812HNUF3 & BTHOMEHUBV3AMathias Kresin2016-07-221-2/+2
| | | | | | | | Both devices were converted to the new image build code but still using the LegacyDevice define. Therefore an image isn't created for the mentioned devices. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: convert remaining xway NAND devices to new image build codeFelix Fietkau2016-07-201-65/+8
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: convert AVM xrx200 devices to new image build codeFelix Fietkau2016-07-201-10/+16
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: convert simple xrx200 devices to new image build codeFelix Fietkau2016-07-201-15/+8
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: add image build template for NAND devicesFelix Fietkau2016-07-201-0/+19
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: simplify image building codeFelix Fietkau2016-07-201-34/+3
| | | | | | | | Specifying the device profile in PROFILES is unnecessary, and for all devices the DEVICE_PROFILE variable matched the device name. Get rid of this useless variable and set DEVICE_DTS to $(1) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix building NAND images in default configFelix Fietkau2016-07-201-35/+22
| | | | | | Remove remaining references to $(PROFILE) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: disable jffs2 support on xrx200Felix Fietkau2016-07-202-20/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image.mk: clean up redundant code related to DEVICE_DTSFelix Fietkau2016-07-151-1/+1
| | | | | | | | It is used by a core build template, so the variable should be initialized and added to DEVICE_VARS in the core. Same for DEVICE_DTS_DIR Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: mac address setting on BTHOMEHUBV3ABen Mulvihill2016-07-051-2/+1
| | | | | | | | | | Rename uboot environment partition on BT Home Hub 3A so that mac address setting works correctly. Also, the mac address field in the ath9k calibration data is not used, and should not be referenced in the dts. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
* Revert "lantiq: enable SMP for XRX200"Felix Fietkau2016-06-271-19/+0
| | | | | | | | | This reverts commit cc3bfdb62f941dff3e2983591c78b6d39ca8d88a. Apparently the ethernet driver is not SMP safe, as reported in https://bugs.lede-project.org/index.php?do=details&task_id=27 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove full cache flush in fuse_copy_do() for MIPSHauke Mehrtens2016-06-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch was introduced in commit r16412 for the brcm47xx target only and then moved to generic in commit r32395. It was initially added because of ticket #5186 and should fix some problems with fuse file systems and MIPS caches. The commit comment in r32395 says that this a generic problem in MIPS CPUs, but does not name any specifics about that. There was a fix added to kernel 2.6.21 in commit commit 7575a49f20 "[MIPS] Implement flush_anon_page()." that should fix this problem, but that was already available before both commits were done to OpenWrt. I just tested fuse with ntfs.3g without this patch on a BCM4704 (BMIPS3300 V0.6) SoC and haven't seen any problems. Someone reported that removing this patch improves some fuse operations by 5 times on some modern MIPS cores. My test was only a simple "dd if=/dev/zero of=/mnt/zero bs=5000" to an USB stick. This patch removes the patch to OpenWrt, because I assume that it is not needed any more and Felix, the orginal author, also thinks so. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update to version 4.4.14Hauke Mehrtens2016-06-262-72/+78
| | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14 Some manual changes to target/linux/generic/patches-4.4/610- netfilter_match_bypass_default_checks.patch were needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix network in failsafeMathias Kresin2016-06-221-9/+1
| | | | | | | | | | So far the network in failsafe is setup only for one board. Use the eth0 interface as lan interface for all boards for now. If a board has its lan interface(s) on another eth, a special handling based on the board name can be added. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421)Oswald Buddenhagen2016-06-225-1/+183
| | | | | | | | | | | | | | | | | | Ethernet, ADSL2+ and LEDs are fully functional. Supporting the two TAE ports and SIP gateway was not attempted. The WiFi is unreliable, due to experimental support for rt35xx family devices by the rt2800pci driver. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> [rebase to LEDE HEAD] [switch to normal image instead of brnboot image] [remove not required pinmux child nodes keys, leds, ebu, exin, pci_in and pci_out] [remove switch_rst pinmux child node (no support for hw reset in driver/setting a default GPIO value in DT] [enable usage of the wireless LED] [fixup mac address configuration] Sgned-off-by: Mathias Kresin <dev@kresin.me>
* kernel: Move append-dtb to common image-commandsBen Whitten2016-06-221-6/+2
| | | | | | This build step is used by various targets, move it to a common section. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>