aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: fix lzma-loader for Netgear DGN 3500(B)Maik Goette2023-04-022-5/+18
| | | | | | | Fixes Uncompressing Kernel Image ... ERROR: LzmaDecode.c, 561 Fixes: #11701 for both 3500(B) Signed-off-by: Maik Goette <github@beeit.de>
* lantiq: nand: don't yield while holding spinlockThomas Nixon2023-04-022-0/+76
| | | | | | | | | | | | | | | | | | | The nand driver normally while waiting for the device to become ready; this is normally fine, but xway_nand holds the ebu_lock spinlock, and this can cause lockups if other threads which use ebu_lock are interleaved. Fix this by waiting instead of polling. This mainly showed up as crashes in ath9k_pci_owl_loader (see https://github.com/openwrt/openwrt/issues/9829 ), but turning on spinlock debugging shows this happening in other places too. This doesn't seem to measurably impact boot time. Tested on bt_homehub-v5a with 5.10 and 5.15. Signed-off-by: Thomas Nixon <tom@tomn.co.uk> [Add commit description into patch] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: xway: add support for AVM FRITZ!Box 7330Aleksander Jan Bajkowski2023-03-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The AVM FRITZ!Box 7330 shares hardware with the AVM Fritzbox 7320 except for the second ethernet port, which only supports 100M. Hardware: - SoC: Lantiq ARX 188 - CPU: 2x MIPS 34Kc 393 MHz - RAM: 64 MiB 196 MHz - Flash: 16 MiB NAND - Ethernet: Built-in Gigabit Ethernet switch, 1x 1GbE, 1x 100M - Wifi: Atheros AR9227-BC2A b/g/n with 2 pcb/internal antennas - USB: 2x USB 2.0 - DSL: Built-in ADSL2+ modem - DECT: Dialog SC14441 - LEDs: 1 two-color, 4 one-color - Buttons: 1x DECT, 1x WIFI - Telephone connectors: 1 FXS port via TAE or RJ11 connector Installation: The installation process is described on the wiki. Unsupported (same as AVM 7320): - VoIP (DECT and FXS), - Second Ethernet port. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* lantiq: xrx200: convert FritzBox 7360v2's wifi to nvmemChristian Lamparter2023-03-263-11/+18
| | | | | | | | | | | | | | | | this was thoroughly tested (warm and cold boots). on a real 7360v2. This is because there have been documented hick-ups with other lantiq devices that need the owl-loader too. It's likely that the 7360(sl) could be converted in the same way as well. However the 7362sl uses a reversed caldata format, so the "qca,no-eeprom" stays in place. The patch also moves the urloader nvmem partition definition into the partition section. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.15 to 5.15.104John Audia2023-03-251-1/+1
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.173John Audia2023-03-204-17/+9
| | | | | | | | | Manually rebased: ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch All other patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* lantiq: xway: add phy reset pin to AVM Fritz!Box 7320Aleksander Jan Bajkowski2023-03-191-0/+17
| | | | | | | | | | This commit adds the PHY reset gpio for the LAN1 port to the dts. According to the GPL sources, gpios 34 and 36 are used on the AVM FritzBox 7320 and 7330. The second port is unsupported. The gpio assignment has been verified on the FritzBox 7330. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: bump 5.15 to 5.15.100John Audia2023-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.15/950-0421-Support-RPi-DPI-interface-in-mode6-for-18-bit-color.patch bcm27xx/patches-5.15/950-0706-media-i2c-imx219-Scale-the-pixel-clock-rate-for-the-.patch ramips/patches-5.15/810-uvc-add-iPassion-iP2970-support.patch Removed upstreamed: bcm27xx/patches-5.15/950-0707-drm-vc4-For-DPI-MEDIA_BUS_FMT_RGB565_1X16-is-mode-1-.patch[1] bcm27xx/patches-5.15/950-0596-drm-vc4-dpi-Add-option-for-inverting-pixel-clock-and.patch[2] ipq807x/0006-v5.16-arm64-dts-qcom-Fix-IPQ8074-PCIe-PHY-nodes.patch [3] ipq807x/0034-v6.1-arm64-dts-qcom-ipq8074-fix-PCIe-PHY-serdes-size.patch [4] ipq807x/0103-arm64-dts-qcom-ipq8074-fix-Gen2-PCIe-QMP-PHY.patch [5] ipq807x/0104-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-QMP-PHY.patch [6] ipq807x/0105-arm64-dts-qcom-ipq8074-correct-Gen2-PCIe-ranges.patch [7] ipq807x/0108-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-node.patch [8] ipq807x/0109-arm64-dts-qcom-ipq8074-correct-PCIe-QMP-PHY-output-c.patch [9] ipq807x/0132-arm64-dts-qcom-ipq8074-correct-USB3-QMP-PHY-s-clock-.patch [10] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.99&id=d2991e6b30020e286f2dd9d3b4f43548c547caa6 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/gpu/drm/vc4/vc4_dpi.c?h=v5.15.100&id=8e04aaffb6de5f1ae61de7b671c1531172ccf429 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=a55a645aa303a3f7ec37db69822d5420657626da 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=d9df682bcea57fa25f37bbf17eae56fa05662635 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=7e6eeb5fb3aa9e5feffdb6e137dcc06f5f6410e1 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=e88204931d9a60634cd50bbc679f045439c4b91d 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=1563af0f28afd3b6d64ac79a2aecced3969c90bf 8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=feb8c71f015d416f1afe90e1f62cf51e47376c67 9. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=69c7a270357a7d50ffd3471b14c60250041200e3 10. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/arch/arm64/boot/dts/qcom/ipq8074.dtsi?h=v5.15.99&id=dd3d021ae5471d98adf81f1e897431c8657d0a18 Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3 Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> Tested-by: Robert Marko <robimarko@gmail.com> #ipq807x/Dynalink WRX36 Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x/ax3600, x86_64/FW-7543B, ath79/tl-wdr3600, ipq806x/g10, ipq806x/nbg6817
* treewide: remove label = "cpu" from DSA dt-bindingArınç ÜNAL2023-02-261-1/+0
| | | | | | | This is not used by the DSA dt-binding, so remove it from all devicetrees. Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9cc115d8d6f73dd260de1609182f3645844d6907 Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* lantiq: ar9/vr9: add fritz-tffs packageFelix Baumann2023-02-082-8/+12
| | | | | | | Add fritz-tffs package to AVM devices Reorder some devices packages for consistency Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* treewide: replace wpad-basic-wolfssl defaultRosen Penev2023-02-045-47/+47
| | | | | | | The newly merged mbedtls backend is smaller and has fewer ABI related issues than the wolfSSL one. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: bump 5.10 to 5.10.163John Audia2023-01-141-1/+1
| | | | | | | | | | | | | | | Removed upstreamed: generic/101-Use-stddefs.h-instead-of-compiler.h.patch[1] All patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.163&id=ddd2bb08bd99b7ee4442fbbe0f9b80236fdd71d2 Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me>
* lantiq: xrx200: Fix wifi LED on o2 box 6431Florian Maurer2023-01-112-1/+1
| | | | | | | Wifi LED did not work using phy0radio, which somehow slipped through in the previous testing Signed-off-by: Florian Maurer <f.maurer@outlook.de>
* lantiq-xrx200: fix wan LED on o2 box 6431Florian Maurer2023-01-041-1/+4
| | | | | | | | | | | The WIFI LED already worked for me with the latest openwrt 22.03 version. Wifi LED did not with an older 22.x version (in gluon - there phy0radio did nothing but phy0tpt did show activity the WAN interface has the name "wan" and not "pppoe-wan" on this device fixes #7757 (and FS#2987) Signed-off-by: Florian Maurer <f.maurer@outlook.de>
* kernel: bump 5.15 to 5.15.86John Audia2023-01-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.15/101-Use-stddefs.h-instead-of-compiler.h.patch[1] ipq806x/patches-5.15/122-01-clk-qcom-clk-krait-fix-wrong-div2-functions.patch[2] bcm27xx/patches-5.15/950-0198-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch[3] Manually rebased: ramips/patches-5.15/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch[4] Added patch/backported: ramips/patches-5.15/107-PCI-mt7621-Add-sentinel-to-quirks-table.patch[5] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=c160505c9b574b346031fdf2c649d19e7939ca11 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=a051e10bfc6906d29dae7a31f0773f2702edfe1b 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.86&id=ec1727f89ecd6f2252c0c75e200058819f7ce47a 4. Quilt gave this output when I applied the patch to rebase it: % quilt push -f Applying patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch patching file arch/mips/ralink/Kconfig patching file drivers/pci/controller/Kconfig patching file drivers/pci/controller/Makefile patching file drivers/staging/Kconfig patching file drivers/staging/Makefile patching file drivers/staging/mt7621-pci/Kconfig patching file drivers/staging/mt7621-pci/Makefile patching file drivers/staging/mt7621-pci/TODO patching file drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt patching file drivers/staging/mt7621-pci/pci-mt7621.c Hunk #1 FAILED at 1. Not deleting file drivers/staging/mt7621-pci/pci-mt7621.c as content differs from patch 1 out of 1 hunk FAILED -- saving rejects to file drivers/staging/mt7621-pci/pci-mt7621.c.rej patching file drivers/pci/controller/pcie-mt7621.c Applied patch platform/100-PCI-mt7621-Add-MediaTek-MT7621-PCIe-host-controller-.patch (forced; needs refresh) Upon inspecting drivers/staging/mt7621-pci/pci-mt7621.c.rej, it seems that the original patch wants to delete drivers/staging/mt7621-pci/pci-mt7621.c but upstream's version was not an exact match. I opted to delete that file. 5. Suggestion by hauke: https://github.com/torvalds/linux/commit/19098934f910b4d47cb30251dd39ffa57bef9523 "This patch is in upstream kernel, but it was backported to the old staging driver in kernel 5.15." Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* lantiq: vr9: include usb driver for fritz 7430Tony Butler2022-12-111-1/+2
| | | | | | | | | | Reported by user: missing driver for USB; add to image definition https://github.com/openwrt/openwrt/issues/11326 Resolves: #11326 Signed-off-by: Tony Butler <spudz76@gmail.com> Acked-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* lantiq: xway: kernel: enable SMP supportChristian Buschau2022-11-182-0/+50
| | | | | | | | | Enabled CONFIG_MIPS_MT_SMP and CONFIG_SCHED_SMT. Tested on FRITZ!Box 7330 SL, 7312 and o2 Box 4421. Signed-off-by: Christian Buschau <christian.buschau@mailbox.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: xway: ar9: add ICU1 (2nd core for SMP)Christian Buschau2022-11-181-2/+2
| | | | | | | Fixes leftover TODO from commit 6bf179b27004eb76df3e466bd080fc5a83ccf0dd Signed-off-by: Christian Buschau <christian.buschau@mailbox.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: xway: refresh kernel configChristian Buschau2022-11-182-3/+22
| | | | | | | Run of 'make kernel_oldconfig CONFIG_TARGET=subtarget' Signed-off-by: Christian Buschau <christian.buschau@mailbox.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: bump 5.15 to 5.15.77John Audia2022-11-051-11/+10
| | | | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch lantiq/patches-5.15/0028-NET-lantiq-various-etop-fixes.patch All other patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.153John Audia2022-11-051-11/+10
| | | | | | | | | | Manually rebased: bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* lantiq: add 6.1 tag to upstream patchAleksander Jan Bajkowski2022-10-232-4/+6
| | | | | | | Add 6.1 tag to upstream patch now that 6.1 got tagged. This permits to track patch in a better way and directly drop them on kernel bump. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* lantiq: Add Linux 5.15 as testing kernel versionMartin Blumenstingl2022-10-221-1/+1
| | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: 5.15: refresh patchesMartin Blumenstingl2022-10-2217-337/+66
| | | | | | | | | | | | | | | 0001-MIPS-lantiq-add-pcie-driver.patch needs to drop MODULE_SUPPORTED_DEVICE because that macro is gone on newer kernels. Add checks for copy_{to,from}_user in 0008-MIPS-lantiq-backport-old-timer-code.patch which is now mandatory. 0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch get dropped because it's a backport from Linux 5.13. All other patches are refreshed. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: copy Linux 5.10 files in preparation for Linux 5.15 supportMartin Blumenstingl2022-10-2244-0/+12716
| | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: add rgmii delays on BT Home Hub 5AAleksander Jan Bajkowski2022-10-211-3/+9
| | | | | | | | | | | | This comit fixes warnings that occur on kernel 5.15: ... [ 2.269736] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6 1e108000.switch-mii:00: PHY has delays (e.g. via pin strapping), but phy-mode = 'rgmii' [ 2.269736] Should be 'rgmii-id' to use internal delays txskew:1500 ps rxskew:1500 ps ... Ref: https://github.com/torvalds/linux/commit/be393dd685d215d44a43f5c5dcb8f7e57668d00e Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* lantiq: dts: vr9: Add missing properties to the CPU port on the switchMartin Blumenstingl2022-10-101-0/+6
| | | | | | | | | | | | | | | | The CPU port should define the phy-mode and and a PHY phandle or fixed-link to indicate how the CPU port is connected to the SoC's Ethernet controller. On xRX200 this is all internal connection, so use phy-mode = "internal" along with a fixed-link that matches the definition inside &eth0. Linux 6.0 shows a warning since upstream commit e09e9873152e3f ("net: dsa: make phylink-related OF properties mandatory on DSA and CPU ports"). when these properties are missing. Adding the properties before OpenWrt is updated to Linux 6.0 is harmless. Suggested-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: bump 5.10 to 5.10.147John Audia2022-10-091-1/+1
| | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/083-v6.0-clk-iproc-Do-not-rely-on-node-name-for-correct-PLL-s.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.147&id=a8e6cde5062fb2aff81f86cc0770591714bee545 Signed-off-by: John Audia <therealgraysky@proton.me>
* lantiq: enable interrupts on second VPEsAleksander Jan Bajkowski2022-10-021-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is needed to handle interrupts by the second VPE on the Lantiq ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to the second VPE results in a hang. Currently, the vsmp_init_secondary() function is responsible for enabling these interrupts. It only enables Malta-specific interrupts (SW0, SW1, HW4 and HW5). The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware interrupts are wired to an ICU instance. Each VPE has an independent instance of the ICU. The mapping of the ICU interrupts is shown below: SW0(IP0) - IPI call, SW1(IP1) - IPI resched, HW0(IP2) - ICU 0-31, HW1(IP3) - ICU 32-63, HW2(IP4) - ICU 64-95, HW3(IP5) - ICU 96-127, HW4(IP6) - ICU 128-159, HW5(IP7) - timer. This patch enables all interrupt lines on the second VPE. This problem affects multithreaded SoCs with a custom interrupt controller. SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the future, this may be replaced with some generic solution. Tested on Lantiq xRX200. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* ltq-vdsl-app: rename to ltq-vdsl-vr9-appAndre Heider2022-09-171-1/+1
| | | | | | | This matches the scheme used by other target packages and will avoid confusion with any future version. Signed-off-by: Andre Heider <a.heider@gmail.com>
* lantiq: xrx200: backport upstream network fixesAleksander Jan Bajkowski2022-09-113-0/+93
| | | | | | | This series contains bug fixes that may occur under memory pressure. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: bump 5.10 to 5.10.137Petr Štetiar2022-08-231-1/+1
| | | | | | | | | | Removed following upstreamed patch: * bcm53xx: 081-next-ARM_dts_BCM53015-add-mr26.patch All other patches automagically rebased. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: Activate CONFIG_GPIOLIB in generic configurationHauke Mehrtens2022-08-101-1/+0
| | | | | | | | All targets expect the malta target already activate the CONFIG_GPIOLIB option. Move it to generic kernel configuration and also activate it for malta. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix lan port 3+4 phy-mode settings for Fritzbox 3390Daniel Kestrel2022-08-051-2/+2
| | | | | | | | There are forum reports that 2 LAN ports are still not working, the phy-mode settings are adjusted to fix the problem. Fixes: #10371 Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: fix network port GPIO settings for Fritzbox 3390Daniel Kestrel2022-07-221-2/+2
| | | | | | | There are forum reports that 2 LAN ports are not working, the GPIO settings are adjusted to fix the problem. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: dts: td-w8980: Remove duplicate PCI propertiesMartin Blumenstingl2022-06-271-3/+1
| | | | | | | | | lantiq,bus-clock, interrupt-map-mask and interrupt-map are already defined with these exact values in vr9.dtsi. Drop them from vr9_tplink_tdw8980.dts to just have one place where these are maintained. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: bump 5.10 to 5.10.122John Audia2022-06-271-2/+2
| | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-241-0/+2
| | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* lantiq: dts: fix reset controller reference on Danube and AR9Martin Blumenstingl2022-06-202-2/+2
| | | | | | | | | | | ar9.dtsi and danube.dtsi only have one reset controller and they are naming it "reset". This is equivalent to "reset0" in vr9.dtsi. Fix the references to the reset controller in the recently added PCI controller reset line. Fixes: 087f2cba26faf0 ("lantiq: dts: Add the reset line for the PCI controller") Reported-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: dts: Add the reset line for the PCI controllerMartin Blumenstingl2022-06-193-0/+6
| | | | | | | The PCI controller has it's reset line wired up to bit 13 of RCU. Describe this in our .dtsi files. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: bump 5.10 to 5.10.118John Audia2022-06-062-3/+3
| | | | | | | | | | | | | Removed upstreamed: generic-backport/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch generic-backport/774-v5.15-2-igc-remove-phy-type-checking.patch All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.114John Audia2022-05-162-7/+7
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me>
* lantiq: xway: disable unused switch driversAleksander Jan Bajkowski2022-05-141-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of the devices supported by target xway are using Realtek RTL8366S, RTL8367A and RTL8367B switches. The switches mentioned earlier were enabled when bumping the kernel version to 3.7 in commit 3a948770cf46 ("add linux-v3.7"). Switches used by individual devices are listed below. Device Switch PHY Arcadyan ARV4510PW Infineon ADM6996I int. switch Arcadyan ARV4519PW Atheros AR8216 int. switch Arcadyan ARV7506PW11 Realtek RTL8306G int. switch Arcadyan ARV7510PW22 Atheros AR8216 int. switch Arcadyan ARV7518PW Atheros AR8216 int. switch Arcadyan ARV7519PW Atheros RTL8306G int. switch Arcadyan ARV7525PW N/A IC+ IP101A Arcadyan ARV752DPW Realtek RTL8306G int. switch Arcadyan ARV752DPW22 Atheros AR8216 int. switch Arcadyan ARV8539PW22 Atheros AR8216 int. switch AVM Fritzbox 7312 int. SoC Atheros AR8030-A AVM Fritzbox 7320 int. SOC Lantiq PEF7071V AudioCodes MediaPack MP-252 Infineon ADM6996I int. switch BT Home Hub 2B Infineon ADM6996I int. switch BT Home Hub 3A Infineon PSB6972 Lantiq PEF7071V Buffalo WBMR-HP-G300H-A Atheros AR8316 int. switch Buffalo WBMR-HP-G300H-B Atheros AR8316 int. switch Lantiq EASY50712 Infinein ADM6996I int. switch Netgear DGN3500 Realtek RTL8366RB int. switch Netgear DGN3500B Realtek RTL8366RB int. switch Siemens Gigaset sx76x Infineon ADM6996I int. switch ZTE H201L Realtek RTL8306G int. switch ZyXEL P-2601HN-F1 Realtek RTL8306E int. switch ZyXEL P-2601HN-F3 Realtek RTL8306E int. switch Reduces uncompressed kernel size by 36 kB. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (checkpatch.pl fixes) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* lantiq: fritz736x: Move GPIO resets to the inidvidual board.dts filesMartin Blumenstingl2022-04-164-32/+77
| | | | | | | | | | FRITZ!Box 7360 V2 and FRITZ!Box 7360 SL both use GPIOs 37 (for &phy0) and GPIO 44 (for &phy1) to control the PHY's reset lines. FRITZ!Box 7362 SL however uses GPIO 45 (for &phy0) and GPIO 44 (for &phy1). Move the GPIO reset definitions to each individual board .dts and while at it, fix the GPIOs for the FRITZ!Box 7362 SL. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: bump 5.10 to 5.10.110John Audia2022-04-091-1/+1
| | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Compile-/run-tested: ath79/generic (Archer C7 v2). Signed-off-by: John Audia <graysky@archlinux.us>
* lantiq: xrx200: replace patch with upstream versionAleksander Jan Bajkowski2022-03-255-101/+402
| | | | | | | | | | | This commit replaces patch number 0703 with the upstream accepted version. This patch requires backporting an additional patch to avoid conflicts. The only significant change is the lower maximum MTU. Packets with lengths over 2400 may be dropped. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* lantiq: fritz7362sl: add partition subnode for SPI flashJan Hoffmann2022-03-161-14/+20
| | | | | | | | | | | Without a partition subnode ofpart_core still parses direct subnodes as partitions, but it ignores nodes with a compatible property. Due to this, the switch to nvmem-cells made the urlader partition inaccessible. As a result, the wireless network was broken, as the calibration data is read from that partition by a script. Fixes: #8983 Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* lantiq: fritz7362sl: fix SPI flash node reg propertyMartin Blumenstingl2022-03-161-1/+1
| | | | | | | | | | | The &spi node has #address-cells = <1> and #size-cells = <0>. Drop the extra 0 in the reg property from the SPI flash node to ensure it's number of cells matches the definition in the parent node. This also makes the reg property for the SPI flash node consistent with all other VR9 boards. Fixes: eae6cac6a30b ("lantiq: add support for AVM FRITZ!Box 7362 SL") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: xrx200: fix use after free bugAleksander Jan Bajkowski2022-03-084-0/+30
| | | | | | | The skb->len field is read after the packet is sent to the network stack. In the meantime, skb can be freed. This patch fixes this bug. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-011-4/+4
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-27 01:05:01 +0000