aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.114John Audia2022-05-172-7/+7
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 8592df67f40b3afdee68e36dc3820187ec0f98fc)
* lantiq: xway: disable unused switch driversAleksander Jan Bajkowski2022-05-151-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of the devices supported by target xway are using Realtek RTL8366S, RTL8367A and RTL8367B switches. The switches mentioned earlier were enabled when bumping the kernel version to 3.7 in commit 3a948770cf46 ("add linux-v3.7"). Switches used by individual devices are listed below. Device Switch PHY Arcadyan ARV4510PW Infineon ADM6996I int. switch Arcadyan ARV4519PW Atheros AR8216 int. switch Arcadyan ARV7506PW11 Realtek RTL8306G int. switch Arcadyan ARV7510PW22 Atheros AR8216 int. switch Arcadyan ARV7518PW Atheros AR8216 int. switch Arcadyan ARV7519PW Atheros RTL8306G int. switch Arcadyan ARV7525PW N/A IC+ IP101A Arcadyan ARV752DPW Realtek RTL8306G int. switch Arcadyan ARV752DPW22 Atheros AR8216 int. switch Arcadyan ARV8539PW22 Atheros AR8216 int. switch AVM Fritzbox 7312 int. SoC Atheros AR8030-A AVM Fritzbox 7320 int. SOC Lantiq PEF7071V AudioCodes MediaPack MP-252 Infineon ADM6996I int. switch BT Home Hub 2B Infineon ADM6996I int. switch BT Home Hub 3A Infineon PSB6972 Lantiq PEF7071V Buffalo WBMR-HP-G300H-A Atheros AR8316 int. switch Buffalo WBMR-HP-G300H-B Atheros AR8316 int. switch Lantiq EASY50712 Infinein ADM6996I int. switch Netgear DGN3500 Realtek RTL8366RB int. switch Netgear DGN3500B Realtek RTL8366RB int. switch Siemens Gigaset sx76x Infineon ADM6996I int. switch ZTE H201L Realtek RTL8306G int. switch ZyXEL P-2601HN-F1 Realtek RTL8306E int. switch ZyXEL P-2601HN-F3 Realtek RTL8306E int. switch Reduces uncompressed kernel size by 36 kB. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (checkpatch.pl fixes) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 8b5d2a73255298b916259ccbc609e4667a335844)
* lantiq: fritz736x: Move GPIO resets to the inidvidual board.dts filesMartin Blumenstingl2022-04-174-32/+77
| | | | | | | | | | | FRITZ!Box 7360 V2 and FRITZ!Box 7360 SL both use GPIOs 37 (for &phy0) and GPIO 44 (for &phy1) to control the PHY's reset lines. FRITZ!Box 7362 SL however uses GPIO 45 (for &phy0) and GPIO 44 (for &phy1). Move the GPIO reset definitions to each individual board .dts and while at it, fix the GPIOs for the FRITZ!Box 7362 SL. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (cherry picked from commit 56cd49bdc8ff762c52327ee7faa14cb99895e0fd)
* kernel: bump 5.10 to 5.10.110John Audia2022-04-101-1/+1
| | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Compile-/run-tested: ath79/generic (Archer C7 v2). Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebased in 22.03 tree] Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit b92ec82235b996ece32bc84af177adf1a4dcb90e)
* lantiq: xrx200: replace patch with upstream versionAleksander Jan Bajkowski2022-03-275-101/+402
| | | | | | | | | | | | This commit replaces patch number 0703 with the upstream accepted version. This patch requires backporting an additional patch to avoid conflicts. The only significant change is the lower maximum MTU. Packets with lengths over 2400 may be dropped. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> (cherry picked from commit b4970dab6b0c3e13715f4b13de42d72a74c1c9e9)
* lantiq: fritz7362sl: add partition subnode for SPI flashJan Hoffmann2022-03-161-14/+20
| | | | | | | | | | | Without a partition subnode ofpart_core still parses direct subnodes as partitions, but it ignores nodes with a compatible property. Due to this, the switch to nvmem-cells made the urlader partition inaccessible. As a result, the wireless network was broken, as the calibration data is read from that partition by a script. Fixes: #8983 Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* lantiq: fritz7362sl: fix SPI flash node reg propertyMartin Blumenstingl2022-03-161-1/+1
| | | | | | | | | | | The &spi node has #address-cells = <1> and #size-cells = <0>. Drop the extra 0 in the reg property from the SPI flash node to ensure it's number of cells matches the definition in the parent node. This also makes the reg property for the SPI flash node consistent with all other VR9 boards. Fixes: eae6cac6a30b ("lantiq: add support for AVM FRITZ!Box 7362 SL") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: xrx200: fix use after free bugAleksander Jan Bajkowski2022-03-084-0/+30
| | | | | | | The skb->len field is read after the packet is sent to the network stack. In the meantime, skb can be freed. This patch fixes this bug. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-011-4/+4
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-011-1/+1
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ltq-deu: add ltq-deu back to default packagesDaniel Kestrel2022-01-163-7/+9
| | | | | | | | | After enhancing ltq-deu, build it by default for the devices using it. Reverts: 964863b ("ltq-deu: Mark lantiq DEU broken") Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: backport latest upstream patchesAleksander Jan Bajkowski2022-01-163-0/+266
| | | | | | | | | | | | This patch includes a series of performance improvements. All patches were accepted and should land in 5.17. NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500): Down Up Before 539 Mbps 599 Mbps After 624 Mbps 695 Mbps Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* lantiq: xrx200: enable use of baby jumbo framesThomas Nixon2022-01-166-12/+484
| | | | | | | | | | | | | | | | | | xrx200 max MTU is reduced so that it works correctly when set to the max, and the max MTU of the switch is increased to match. In 5.10, the switch driver now enables non-standard MTUs on a per-port basis, with the overall frame size set based on the cpu port. When the MTU is not used, this should have no effect. The maximum packet size is limited as large packets cause the switch to lock up. 0702-net-lantiq-add-support-for-jumbo-frames.patch comes from net-next commit 998ac358019e491217e752bc6dcbb3afb2a6fa3e. In 5.4, all switch ports are configured to accept the max MTU, as 5.4 does not have port_max_mtu/port_change_mtu callbacks. Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
* lantiq: increase fritz-cal-extract output limitDavid Bauer2022-01-151-2/+2
| | | | | | | | | | | It was reported the caldata on the FritzBox 7430 is not only stored at different offsets, but is also larger than the current output size limit. Increase the output file size limit (after deflate) by 1024 bytes. Ref: FS#3604 ("ath9k firmware is 0 bytes on Fritzbox 7430") Signed-off-by: David Bauer <mail@david-bauer.net>
* lantiq: add additional caldata offsetsDavid Bauer2022-01-151-3/+2
| | | | | | | | | | | | | | | It was reported the AVM FritzBox 7430 has different offsets for the caldata depending on the device. Whether this is due to custom bad-block handling or up to the installed bootloader-version is unknown. Try both known caldata offsets like it is already done for the ipq40xx NAND based models. Use the same approach for the FritzBox 7412. While it is currently unknown, whether it is affected, applying the same logic has no downsides. Signed-off-by: David Bauer <mail@david-bauer.net>
* lantiq: flag FritzBox 7360 family buttons active-lowDavid Bauer2022-01-141-2/+2
| | | | | | | | All buttons of the FritzBox 7360 family are active-low, not active-high. Corrent the GPIO flag. This fixes release triggers upon push of a button. Reported-by: Jan-Niklas Burfeind <git@aiyionpri.me> Signed-off-by: David Bauer <mail@david-bauer.net>
* lantiq: replace patches with version accepted upstreamAleksander Jan Bajkowski2022-01-085-15/+116
| | | | | | Replace recently added patches with version accepted upstream. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: 5.10: consolidate mac80211 crypto optionsSergey Ryazanov2021-12-172-7/+0
| | | | | | | | | | | | | | | | | | | | | | Each of - CRYPTO_AEAD2 - CRYPTO_AEAD - CRYPTO_GF128MUL - CRYPTO_GHASH - CRYPTO_HASH2 - CRYPTO_HASH - CRYPTO_MANAGER2 - CRYPTO_MANAGER - CRYPTO_NULL2 either directly required for mac80211 crypto support, or directly selected by such options. Support for the mac80211 crypto was enabled in the generic config since c7182123b9 ("kernel: make cryptoapi support needed by mac80211 built-in"). So move the above options from the target configs to the generic config to make it clear why do we need them. CC: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: filter out both Clang and LLD versionsSergey Ryazanov2021-12-171-1/+0
| | | | | | | | Both CLANG_VERSION and LLD_VERISON are autogenerated runtime configuration options, so add them to the kernel configuration filter and remove from generic and per-target configs to keep configs clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* treewide: use uniform vendor value for british telecomMoritz Warning2021-12-123-3/+3
| | | | | | British Telecom is mostly known as BT. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* lantiq: fixed wifi support for AVM FRITZ!Box 7430Joel Linn2021-12-111-2/+4
| | | | | | | | | | | | adds the correct offset for the calibration data. The values are according to the OpenWrt Forum Thread: "Fritzbox 7430 and wifi". Link: <https://forum.openwrt.org/t/fritzbox-7430-and-wifi/86944> Reported-by: RENErica Signed-off-by: Joel Linn <jl@conductive.de> [changed commit message] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* lantiq: xway_legacy: disable unused switchesAleksander Jan Bajkowski2021-11-301-8/+0
| | | | | | | | | | | | | | | | | | | | | The xway_legacy subtarget only supports 5 devices. Most compiled switch drivers are unused by any of these devices. The same drivers are compiled into the xway subtarget. They were probably copied from there when creating this subtarget. Switches used by devices: Arcadyan ARV4518PWR01 Realtek RTL8306SD Arcadyan ARV4518PWR01A Realtek RTL8306SD Arcadyan ARV4520PW Infineon ADM6996I Arcadyan ARV4525PW only PHY(IC+ IP101A) Arcadyan ARV452CQW Realtek RTL8306 The CONFIG_ETHERNET_PACKET_MANGLE symbol has also been disabled, as it is only needed by the driver for AR8216. Reduces kernel size by 19.9 kB. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* lantiq: set maximum kernel size for P2812HNUF3Mathias Kresin2021-11-271-0/+2
| | | | | | | | | | | The board has a fixed size kernel partition but do not limit the kernel size during image building. Disable image building for both boards as well, since the kernel of the last release as well as master are to big to fit into the 2 MByte kernel partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: drop kernel 5.4 supportAleksander Jan Bajkowski2021-11-2734-11702/+0
| | | | | | | | The current state of the kernel 5.4 support is in the openwrt-21.02 branch. No need to keep a not default used kernel in this branch. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [VRX268/ bthub5]
* lantiq: switch to kernel 5.10Aleksander Jan Bajkowski2021-11-271-1/+1
| | | | | | | Use kernel 5.10 by default. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [VRX268/ bthub5]
* lantiq: ar7: use okli loader for FRITZ!BoxMathias Kresin2021-11-274-3/+46
| | | | | | | | | | With Kernel 5.10 the ar7 FRITZ!Box are not booting the initramfs nor the sysupgrade image any more. Presumably due to the grown kernel. Use the okli preloader to workaround the bootloader issue. No solution so far for the initramfs. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: bring back okli loaderMathias Kresin2021-11-2719-0/+2004
| | | | | | | | | | | | | Removed due to being unused with 1f7a03a70603, but now required for the ar7 FRITZ!Box. Could be used for the ARV7519RW22 as well, for which the image generation was disabled due to a stock u-boot issue with kernel bigger than 2 MByte. The code is combination of the ath79 and ramips okli loader. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: bump 5.10 to 5.10.82John Audia2021-11-271-1/+1
| | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0014-ARM-dts-NSP-Fix-mpcore-mmc-node-names.patch Manually rebased: ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.81John Audia2021-11-271-1/+1
| | | | | | | | | | | | | Manually rebased: octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.80Rui Salvaterra2021-11-195-210/+1
| | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch [1] bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch [2] lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch [3] lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch [4] lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch [5] lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch [6] Manually rebased: ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=47462c5e600fbaffd755cd13dedd80d04e41ff83 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=2fde76df1885a6bec04317e457121326070450eb [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=9b366f5221d8aa64b22f35be137a5749326444ce [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=5af57ce8a6155fe3e4270d28d171abf8903bebc0 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=b92a5df2c7adc79a57481445f67de0c1c716581f [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=6b72caabc47011d03f44064452b2c65e8ed18326 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* lantiq: improve ethernet performanceAleksander Jan Bajkowski2021-11-1514-0/+706
| | | | | | | | This commit contains a series of fixes for DMA. The burst length patch significantly improves Ethernet performance. Patches were tested on the xRX200 and xRX330. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* lantiq: fix mac address from nvmem-cellsMathias Kresin2021-11-142-2/+0
| | | | | | | | | | The devicetree property mac-address is expected to be set by the bootloader and has priority over the nvmem supplied one. Drop the mac-address address property from the dtsi files, to let the mac address from nvmem-cells get used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: 5.10: packet mangling code only for ar8216 driverMathias Kresin2021-11-023-1/+2
| | | | | | | | Only the ar8216 switch driver uses the packet mangling code. Update the kernel configs accordingly. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath9k: OF: qca,disable-(2|5)ghz => ieee80211-freq-limitChristian Lamparter2021-10-302-2/+2
| | | | | | | | | | | | | | | | | | OpenWrt maintains two special out-of-tree DT properties: "qca,disable-5ghz" and "qca,disable-2ghz". These are implemented in a mac80211 ath9k patch "550-ath9k-disable-bands-via-dt.patch". With the things being what they are, now might be a good point to switch the devices to the generic and upstream "ieee80211-freq-limit" property. This property is much broader and works differently. Instead of disabling the drivers logic which would add the affected band and channels. It now disables all channels which are not within the specified frequency range. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # HH5A Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.74Rui Salvaterra2021-10-211-1/+1
| | | | | | Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.154John Audia2021-10-211-1/+1
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* lantiq: kernel: xway-nand: Move ECC engine setting to new DT bindingDaniel Kestrel2021-10-0213-7/+50
| | | | | | | | | | | | | | | | When trying to add support for another device with Micron NAND chips, it was discovered that the default setting in the kernel source does not work with Micron Chips, since the device trees setting is overwritten and hard coded by the kernel xway_nand driver. This was the original reason for this PR. A kernel patch sets the default ECC mode to soft without overwriting the device tree settings and the device tree for devices using it are updated with new parameters because the old ones are deprecated by torvalds/linux@533af69. A patch for kernel 5.4 is provided to support the new settings because kernel 5.4 does not support it. Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
* lantiq: kernel: xway-nand: Fix setting on-die ECC engines in dtsHauke Mehrtens2021-10-022-2/+70
| | | | | | | This backports a fix proposed for upstream kernel to fix overwriting the NAND ECC engine in device tree. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: move two symbols to the generic kconfigsRui Salvaterra2021-08-292-4/+0
| | | | | | | CONFIG_RCU_{NEED_SEGCBLIST,STALL_COMMON} are set basically everywhere. Move them to the generic kconfigs. And resort the generic kconfigs while at it. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* lantiq: convert mtd-mac-address to nvmem for Fritz!Box 736xAdrian Schmutzler2021-08-204-5/+48
| | | | | | | Convert this series by moving the definitions to the individual devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.139John Audia2021-08-141-2/+2
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.57Rui Salvaterra2021-08-141-2/+2
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.55Rui Salvaterra2021-08-081-1/+1
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: backport support for nvmem on non platform devicesAnsuel Smith2021-08-052-12/+6
| | | | | | | | | | | | In the current state, nvmem cells are only detected on platform device. To quickly fix the problem, we register the affected problematic driver with the of_platform but that is more an hack than a real solution. Backport from net-next the required patch so that nvmem can work also with non-platform devices and rework our current patch. Drop the mediatek and dsa workaround and rework the ath10k patches. Rework every driver that use the of_get_mac_address api. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: bump 5.10 to 5.10.51Rui Salvaterra2021-07-201-1/+1
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* lantiq: convert mtd-mac-address to nvmem implementationAnsuel Smith2021-07-1921-30/+270
| | | | | | | Define nvmem-cells and convert mtd-mac-address to nvmem implementation. The conversion is done with an automated script. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* treewide: convert mtd-mac-address-increment* to generic implementationAnsuel Smith2021-07-1910-11/+11
| | | | | | | | | | | | | Rework patch 681-NET-add-mtd-mac-address-support to implement only the function to read the mac-address from mtd. Generalize mtd-mac-address-increment function so it can be applied to any source of of_get_mac_address. Rename any mtd-mac-address-increment to mac-address-increment. Rename any mtd-mac-address-increment-byte to mac-address-increment-byte. This should make simplify the conversion of target to nvmem implementation. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* treewide: call check-size before append-metadataAdrian Schmutzler2021-07-104-7/+7
| | | | | | | | | | sysupgrade metadata is not flashed to the device, so check-size should be called _before_ adding metadata to the image. While at it, do some obvious wrapping improvements. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org>
* ltq-deu: Mark lantiq DEU brokenHauke Mehrtens2021-06-303-11/+6
| | | | | | | | | | | | | | | | | | | | When the ltq_deu_vr9 kernel module is loaded, hostapd does not start any more. It fails with this error message: daemon.err hostapd: nl80211: kernel reports: key addition failed daemon.err hostapd: Interface initialization failed OpenWrt uses the standard Linux crypto API in the wifi drivers now and this probably makes the system offload more crypto operations to special hardware like the Lantiq DEU. There is probably a bug in the DEU and these operations fail and then hostapd does not start the interface. Do not include the Lantiq DEU by default any more. Fixes: FS#3901 Fixes: 53b6783907f3 ("mac80211: remove patches stripping down crypto support") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Notupus <notpp46@gmail.com>
* lantiq: xrx200: switch the subtarget to the mainline DSA driverMartin Blumenstingl2021-06-2642-8865/+945
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the XRX200 PMAC, GSWIP DSA tag and GSIP DSA drivers in the 5.4 kernel config. Update the existing vr9_*.dts{,i} to use the new Ethernet and switch drivers. Drop the swconfig package from the xrx200 target because swconfig doesn't manage DSA based switches. The new /etc/config/network format for the DSA driver is not compatible with the old (swconfig) based one. Show a message during sysupgrade notifying users about this change and asking them to start with a fresh config (or forcefully update and then migrate the config manually). Failsafe mode can now automatically bring up the first lan interface based on board.json including DSA based setups. Drop 05_set_preinit_iface_lantiq from the xRX200 sub-target as this is not needed anymore. For now we are keeping it for the ase, xway and xway_legacy until there's some confirmation that it can be dropped from there as well. While here, some boards also receive minor fixups: - Use LAN1 as LAN1 (according to a photo this port can also be configured as WAN) on the Buffalo WBMR-300HPD. This makes it easier to read the port mapping because otherwise we would have LAN{2,3,4} and WAN (which was the case for the non-DSA version previously). - vr9_avm_fritz3390.dts: move the "gpio" comment from port 0 and 1 to their corresponding PHYs - vr9_tplink_vr200.dtsi: move the "gpio" comment from port 0 to PHY 0 - vr9_tplink_tdw89x0.dtsi: move the "gpio" comment from port 0 to PHY 0 Acked-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> Tested-by: Notupus <notpp46@googlemail.com> # TD-W9980/DM200/FRITZ 7430 Tested-by: Martin Schiller <ms@dev.tdt.de> # tested on TDT VR2020 Tested-by: Martin Schiller <ms@dev.tdt.de> # tested on TP-Link TD-W8980B Tested-by: Martin Schiller <ms@dev.tdt.de> # tested on ZyXEL P-2812HNU-F1 Tested-by: Daniel Kestrel <kestrel1974@t-online.de> # tested on Fritzbox 7490 Tested-by: Daniel Kestrel <kestrel1974@t-online.de> # tested on Fritzbox 3490 Tested-by: @jospezial <jospezial@gmx.de> # tested on VGV7510KW22 (o2 Box 6431) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 03:36:57 +0000