aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: remove vmmc node from FritzBox 7412 dtsAleksander Jan Bajkowski2020-08-201-4/+0
| | | | | | | | | | | | As described in commit commit 891a7007598d ("lantiq: enable second VPE on Fritz!Box 7412"): The AVM Fritz!Box 7412 does not use the VMMC part of the Lantiq chip but rather a proprietary solution based on the DECT chip for the FXS ports. We can remove last traces of vmmc in dts. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: bump 5.4 to 5.4.59Adrian Schmutzler2020-08-201-35/+0
| | | | | | | | | | | | | | | | | | | | | | Removed since added upstream: bcm27xx: 950-0428-staging-vchiq_arm-Add-a-matching-unregister-call.patch lantiq: 0800-spi-lantiq-ssc-Fix-warning-by-using-WQ_MEM_RECLAI.patch Manually adjusted patches: layerscape: 801-audio-0005-Revert-ASoC-fsl_sai-Add-support-for-SAI-new-version.patch Build-tested: ath79/generic, ramips, lantiq/xrx200, lantiq/xway, mvebu/cortexa9, sunxi/a53 Run-tested: ipq806x (R7800), layerscape (LS1012A-FRDM, LS1046A-RDB) Building on layerscape is only possible with workaround from PR #3179. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-By: John Audia <graysky@archlinux.us> [ipq806x] Tested-by: Pawel Dembicki <paweldembicki@gmail.com> [layerscape]
* treewide: use wpad-basic-wolfssl as defaultPetr Štetiar2020-08-205-45/+45
| | | | | | | | | | | | | | | In order to support SAE/WPA3-Personal in default images. Replace almost all occurencies of wpad-basic and wpad-mini with wpad-basic-wolfssl for consistency. Keep out ar71xx from the list as it won't be in the next release and would only make backports harder. Build-tested (build-bot settings): ath79: generic, ramips: mt7620/mt76x8/rt305x, lantiq: xrx200/xway, sunxi: a53 Signed-off-by: Petr Štetiar <ynezz@true.cz> [rebase, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.58John Audia2020-08-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR is a blend of several kernel bumps authored by ldir taken from his staging tree w/ some further adjustments made by me and update_kernel.sh Summary: Deleted upstreamed patches: generic: 742-v5.5-net-sfp-add-support-for-module-quirks.patch 743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch bcm63xx: 022-v5.8-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch 024-v5.8-mtd-rawnand-brcmnand-fix-CS0-layout.patch mediatek: 0402-net-ethernet-mtk_eth_soc-Always-call-mtk_gmac0_rgmii.patch Deleted patches applied differently upstream: generic: 641-sch_cake-fix-IP-protocol-handling-in-the-presence-of.patch Manually merged patches: generic: 395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch bcm27xx: 950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch layerscape: 701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch Build system: x86_64 Build-tested: ath79/generic, bcm27xx/bcm2708, bcm27xx/bcm2711, imx6, mvebu/cortexa9, sunxi/a53 Run-tested: Netgear R7800 (ipq806x) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-By: Lucian Cristian <Lucian.cristian@gmail.com> [mvebu] Tested-By: Curtis Deptuck <curtdept@me.com> [x86/64] [do not remove 395-v5.8-net-sch_cake-Take-advantage-... patch, adjust and refresh patches, adjust commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-By: John Audia <graysky@archlinux.us> [ipq806x]
* kernel: unify CONFIG_GPIO_SYSFS in kernel configsFelix Fietkau2020-08-062-2/+0
| | | | | | Enable it for all platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: disable default build for devices with 4M flashAdrian Schmutzler2020-07-294-1/+13
| | | | | | | | | | | It has been decided that the 19.07 release will be last one to include 4/32 devices. This disables default build for all devices with 4M flash on lantiq. Note that this will affect _all_ devices for amazonse ("ase") and xway_legacy subtarget. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: fix cosmetic issues with partition offsets and sizesAdrian Schmutzler2020-07-276-8/+8
| | | | | | | This fixes a few cosmetic issues with partition offset and size that are inconsistent probably due to copy/pasting. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: xrx200: disable unused switch and phyAleksander Jan Bajkowski2020-07-265-7/+6
| | | | | | | | | | | | | | | | | | | | xrx200 has a 6 port built-in switch with 2 integrated PHY. None of the xrx200 router uses external switch. Most boards use integrated or Lantiq (Intel) PEF7071 PHY. Only some FritzBox routers use AT803X PHY and VGV7510KW22 use ICPLUS PHY. Other unused PHY drivers may be removed. This patch enables these symbols only on xway and xway_legacy subtargets: - CONFIG_PSB6970_PHY (Driver for PHY in PSB6970 - 7 port FE Switch) - CONFIG_RTL8366RB_PHY (Driver for PHY in RTL8366 - 6 port GE Switch) - CONFIG_RTL8366_SMI (Driver for RTL8366 - 6 port GE Switch) Reduces image size by 7.3kB. Continuation of 58a6f06978f8 (PR: #2983) Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> [fix sorting in config files, small fix in commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: Fix warning in SPI driverHauke Mehrtens2020-07-231-0/+35
| | | | | | | This fixes a warning in the SPI driver at bootup. This warning is seen in kernel 5.4 on lantiq deives. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq/xrx200: make WLAN button responsive on Fritzbox 7360 & 7362Dustin Gathmann2020-07-202-2/+2
| | | | | | | | | | | | | Pressing the 'WLAN' button should enable/disable wireless activity. Currently, the button is mapped to the KEY_WLAN, which will not have this effect. This patch changes the mapping of the WLAN button, so a button press will emit an action for the 'rfkill' key instead of 'wlan'. Apparently, this is what stock OpenWRT expects. This fix is analogous to the preceding patch for Fritzbox 3370. Signed-off-by: Dustin Gathmann <dzsoftware@posteo.org>
* lantiq/xrx200: fix WLAN button actions for Fritzbox 3370Dustin Gathmann2020-07-202-2/+2
| | | | | | | | | | | | The WLAN button actions are reversed, i.e. pressing the button emits a 'released' action, and vice versa. This can easily be checked by adding logger -t button_action "$BUTTON $ACTION" as the second line of /etc/rc.button/rfkill, and using logread to read the events (assuming the preceding patch has been applied). Defining the GPIO as ACTIVE_LOW corrects this behavior. Signed-off-by: Dustin Gathmann <dzsoftware@posteo.org>
* lantiq/xrx200: make WLAN button responsive on Fritzbox 3370Dustin Gathmann2020-07-202-2/+2
| | | | | | | | | | | Pressing the 'WLAN' button should enable/disable wireless activity. However, on the Fritzbox 3370 this doesn't have an effect. This patch changes the mapping of the physical WLAN button, so a button press will emit an action for the 'rfkill' key instead of 'wlan'. Apparently, this is what stock OpenWRT expects, and also what is implemented for most other devices. Signed-off-by: Dustin Gathmann <dzsoftware@posteo.org>
* lantiq: move 01_led_migration script to subtargetsAdrian Schmutzler2020-07-173-7/+61
| | | | | | | | | | | | Split the /etc/uci-defaults/01_led_migration scripts into subtargets as already done for most of the other base-files. While this introduces a minor amount of code duplication, it still is considered an improvement, as device-specific settings are kept together in the subtargets' base-files and the script at hand can be removed entirely for two of the subtargets not needing it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: move dsl related base-files into own packageMartin Schiller2020-07-174-824/+0
| | | | | | | | | | It does not make sense to install this components on lantiq systems where the dsl subsystem is not needed/used. This also makes it possible to use the files also on other targets. (hopefully ipq401x / FritzBox 7530 in the near future) Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com>
* kernel: bump 5.4 to 5.4.51John Audia2020-07-111-4/+4
| | | | | | | | | | | | | | | | | | | | | update via update_kernel.sh -v -u 5.4 Removed upstreamed patches: 350-MIPS-Add-missing-EHB-in-mtc0-mfc0-sequence-for-DSPen.patch Script refreshed patches: 902-debloat_proc.patch 904-debloat_dma_buf.patch Attempted merge conflict in following patches: 0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch Build system: x86_64 Build tested: ipq806x (Netgear R7800) Signed-off-by: John Audia <graysky@archlinux.us> [fixed sha256sum of the tarball] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* lantiq: set correct gphy pins for Zyxel P-2812Willem van den Akker2020-07-102-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This fixes the gphy LED pins for Zyxel P-2812 devices. The have been accidentally altered during a tidy-up operation (see Fixes: below). No ports were available, dmesg reported: [ 0.658577] pinctrl-xway 1e100b10.pinmux: pin io5 already requested by 1e100bb0.stp; cannot claim for 1e108000.eth [ 0.667566] pinctrl-xway 1e100b10.pinmux: pin-5 (1e108000.eth) status -22 [ 0.685238] lantiq,xrx200-net 1e108000.eth: Error applying setting, reverse things back [ 0.693270] lantiq,xrx200-net: probe of 1e108000.eth failed with error -22 Fixes: FS#3188 Fixes: 660200e53d62 ("lantiq: dts: assign the GPHY LED pins to the Ethernet controller node") Suggested-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Willem van den Akker <wvdakker@wilsoft.nl> [commit message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: kernel: drop redundant USB_EHCI_HCD=n config symbolPetr Štetiar2020-07-098-8/+0
| | | | | | | | | Commit e53ec043bae1 ("kirkwood: move usb support to modules") has moved this config symbol into generic configs, so it could be removed from other configs. Suggested-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* lantiq: set port numbers corresponding to reg valueAleksander Jan Bajkowski2020-07-076-53/+53
| | | | | | | | | Fix inconsistencies found in DTS files and sort ethernet ports based on updated names. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> [squash two separate patches, rephrase commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: remove redundant includes from fritz736x DTS filesAleksander Jan Bajkowski2020-07-073-9/+0
| | | | | | | | The removed lines are already included in vr9_avm_fritz736x.dtsi Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl> [rephrase commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: dts: Move the &usb_vbus nodes out of &gpioMartin Blumenstingl2020-07-068-96/+96
| | | | | | | | | | | | | | | | | | | | Move the USB VBUS regulator nodes out of the GPIO controller node. This fixes a problem where the "regulator-fixed" driver wasn't probed for these regulators because the GPIO driver doesn't scan the child-nodes and based on the dt-bindings documentation it's not supposed to. This fixed the following error reported by Luca Olivetti: ... dwc2 1e101000.usb: DWC OTG Controller dwc2 1e101000.usb: new USB bus registered, assigned bus number 1 dwc2 1e101000.usb: irq 62, io mem 0x1e101000 dwc2 1e101000.usb: startup error -517 dwc2 1e101000.usb: USB bus 1 deregistered dwc2 1e101000.usb: dwc2_hcd_init() FAILED, returning -517 Fixes: FS#1634 Cc: Luca Olivetti <luca@ventoso.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: added switch-config for ARV752DPWLars Wessels2020-07-061-0/+1
| | | | | | | | | | Add missing switch config (4 LAN-Ports + CPU). Grey WAN port (used for ADSL) is not part of the switch. Signed-off-by: Lars Wessels <software@bytebox.org> [rework commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* lantiq: wifi mac fix for ARV752DPWLars Wessels2020-07-062-2/+8
| | | | | | | | | | | | Set wifi mac from flash partition 'board_config' to match the label on the device (Easybox 802). Currently the wifi mac is always set to 00:0c:43:28:60:00. eth0 and WiFi will now share the same mac (as in original firmware). Signed-off-by: Lars Wessels <software@bytebox.org> [improve commit message] Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: Update kernel 4.19 to version 4.19.131Hauke Mehrtens2020-07-041-1/+1
| | | | | | | | | | | | | Fixes: - CVE-2020-10757 The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was backported which needed some adaptations to other code. Run tested: ath79 Build tested: ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: remove unused PHY drivers on xrx200Aleksander Jan Bajkowski2020-06-272-12/+0
| | | | | | | | | | All boards on xrx200 use builtin switch and there is no supported device with external switch. It was copy paste from xway subtarget and was added in commit 18b76c66fbfea0e21ff66c6df432fa109c5bbb43. Save 20.3 kB flash memory. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: bump 5.4 to 5.4.48Petr Štetiar2020-06-221-1/+1
| | | | | | | | | | | | | | | | Resolved merge conflict in the following patches: layerscape: 701-net-0213-dpaa2-eth-Add-CEETM-qdisc-support.patch ramips: 0013-owrt-hack-fix-mt7688-cache-issue.patch Refreshed patches, removed upstreamed patch: bcm63xx: 020-v5.8-mtd-rawnand-brcmnand-fix-hamming-oob-layout.patch Run tested: qemu-x86-64 Build tested: x86/64 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* lantiq: fritz7312: set maximum speed to 100 mbit on 5.4Adrian Schmutzler2020-06-211-0/+1
| | | | | | | | | | | | The fritz 7312 does not support 1000 gbit. Advertising it makes it worse. Some NIC will change to 1000 gibt and turn off and on again for ever. The previous patch in 36f628910b8b was only applied to the 4.19 file, so let's just make it consistent with this patch. Cc: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: drop "CONFIG_HZ_100 is not set"Adrian Schmutzler2020-06-172-2/+0
| | | | | | | | | | CONFIG_HZ_100 is not set to "y" in generic config anymore since 3a761c90afc0 ("treewide: Don't diverge from upstream default HZ settings on 4.19"), so we don't need to disable it anymore either. This was the only remaining case in the entire tree. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: switch to 5.4Aleksander Jan Bajkowski2020-06-171-2/+1
| | | | | | Runtime tested on BT Home Hub 5A and D-Link DWR-966. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* treewide: drop shebang from non-executable target filesAdrian Schmutzler2020-06-162-3/+0
| | | | | | | | | | | | | | This drops the shebang from all target files for /lib and /etc/uci-defaults folders, as these are sourced and the shebang is useless. While at it, fix the executable flag on a few of these files. This does not touch ar71xx, as this target is just used for backporting now and applying cosmetic changes would just complicate things. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: fritz 7360 v2: remove additional supported devicesAlexander Couzens2020-05-181-1/+0
| | | | | | | | | | | | The additional supported device isn't required since this is a new device. Some board contains an addtional device, those device were supported in earlier versions which used the "old" image builder code. To support an sysupgrade from such old version, there is the all caps additional device. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: fritz 7360 v2: rename device before it will be usedAlexander Couzens2020-05-185-18/+18
| | | | | | | | | | | Use similiar naming scheme as ath79. Since the fritz 7360 v2 was only in the tree for 2 days, there is no compatibility for the old image. Users which has installed the fritz 7360 v2 before this change, must use sysupgrade --force to skip checks on the board. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: drop outdated kernel version switches from patches-5.4Adrian Schmutzler2020-05-171-15/+3
| | | | | | | | | This drops some ancient kernel version switches from patches on lantiq target. The patch only adjusts the latest kernel 5.4, as doing it a second time for an older kernel seems a waste of time for a cosmetic change. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq/xrx200: add support for the Fritzbox 7360v2Yushi Nishida2020-05-165-1/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Fritzbox 7360v2 CPU: VR9 500MHz Cores: 2 RAM: 128 MB NOR-Flash: 32 MB WLAN: AR9287-BL1A DECT is not working. Thanks Sebastian Ortwein for adding 7360SL. The dts file is derived from avm_fritz7360sl.dts. Firmware can be flashed with this method: 1.) Set your client IP to 192.168.178.2 2.) Power on your your Fritzbox and connect to 192.168.178.1 via ftp in the first 5 seconds. 3.) login with adam2/adam2 4.) type into the ftp prompt: passive binary debug 1 quote MEDIA FLSH // (not FLASH) put openwrt-lantiq-xrx200-avm_fritz7360v2-squashfs-sysupgrade.bin mtd1 // using the correct location for the squashfs-sysupgrade-firmware.bin 5.) wait till red light flashing turns off. 6.) type: exit Run tested with kernel 4.19 and 5.4 on Fritzbox 7360 V2. Issue: Ethernet speed is slow, (iperf between a Xiaomi mir3g and this router results in <80Mbits throughput with a wired cable when using the gbit ports.) Signed-off-by: Yushi Nishida <kyro2man@gmx.net>
* lantiq/fritz 7312: set maximum speed to 100 mbitAlexander Couzens2020-04-211-0/+1
| | | | | | | | The fritz 7312 does not support 1000 gbit. Advertising it makes it worse. Some NIC will change to 1000 gibt and turn off and on again for ever. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* kernel: bump 5.4 to 5.4.28Petr Štetiar2020-03-281-25/+0
| | | | | | | | | | | | | | | | | | | | Changelog since 5.4.24 mentions CVE-2019-19769, CVE-2020-8648, CVE-2020-8649 and CVE-2020-8647. Removed upstreamed: generic: 507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch generic: 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch bcm27xx: 950-0435-ASoC-pcm512x-Fix-unbalanced-regulator-enable-call-in.patch ipq806x: 701-stmmac-fix-notifier-registration.patch lantiq: 002-pinctrl-falcon-fix-syntax-error.patch octeontx: 0002-net-thunderx-workaround-BGX-TX-Underflow-issue.patch Run tested: apu2, qemu-x86-64, apalis, a64-olinuxino, nbg6617 Build tested: sunxi/a53, imx6, x86/64, ipq40xx Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* treewide: omit IMAGE_SIZE argument from check-sizeSungbo Eo2020-03-214-9/+9
| | | | | | | | | Now that check-size uses IMAGE_SIZE by default, we can skip the argument from image recipes to reduce redundancy. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: gather DEVICE_VARS into one placeSungbo Eo2020-03-212-2/+3
| | | | | | | | | | | Place DEVICE_VARS assignments at the top of the file or above Device/Default to make them easier to find. For ramips, remove redundant values already present in parent file. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: kernel 5.4: enable JFFS2Mathias Kresin2020-03-171-1/+0
| | | | | | | | We do not build images with a jffs2 rootfs, but jffs2 is still used as filesystem for the rootfs_data. Fixes: e3eaf578082e ("lantiq: kernel 5.4: debloat kernel config") Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: kernel 5.4: debloat kernel configMathias Kresin2020-03-165-11/+8
| | | | | | | | | | | | | | | The etop driver is used by all targets except xrx200. Remove the UBIFS compression support for zlib and zstd from the xway subtarget. The hardware is EOL for a long time and it's unlikely to ever see a board shipped with an UBIFS using these compression methods. Remove the JFFS2 support. Support for jjfs2 images was dropped years ago. It shrinks the compressed kernel up to 130 KByte. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: add Linux 5.4 support as testing kernel versionMathias Kresin2020-03-1639-366/+883
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to the mainline Lantiq PCIe PHY driver and update the vr9.dtsi accordingly. The Lantiq IRQ SMP support added upstream required changes to the SoC dtsi as well. Following changes are made to the Lantiq kernel patches: 0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch 0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch applied upstream 0008-MIPS-lantiq-backport-old-timer-code.patch access_ok API update because it lost it's type (which was the first) parameter in upstream commit 96d4f267e40f95 ("Remove 'type' argument from access_ok() function") 0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch merged into 0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch 0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch revert upstream changes required for upstream xrx200 ethernet and xrx200 (DSA) switch driver but breaking our driver 0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch required for our driver but dropped upstream, add former upstream version 0028-NET-lantiq-various-etop-fixes.patch now has to use the phy_set_max_speed API instead of modifying phydev->supported. Also call ltq_dma_enable_irq() in ltq_etop_open() based on upstream commit cc973aecf0b054 ("MIPS: lantiq: Do not enable IRQs in dma open") Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: linux 5.4: remove support for the linux,mtd-name OF propertyMartin Blumenstingl2020-03-163-46/+0
| | | | | | | | This is referenced in two .dts but never actually used from userspace. Drop support for this property because it's not used and because it makes updating to Linux 5.4 harder (as the patch doesn't apply anymore). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: copy target to kernel 5.4Mathias Kresin2020-03-16195-0/+27082
| | | | | | | | | Duplicate kernel 4.19 config and patches for kernel 5.4. Duplicate the devicetree source files as well, they need kernel 5.4 specific adjustments. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: vgv7510kw22: fix missing wirelessMathias Kresin2020-03-161-2/+2
| | | | | | | | | | | | | | | | | | | | For some reason pin 7 (gphy0_led1_pins) need to be set to output prior to loading the PCI driver. Otherwise the wireless doesn't appear on the PCI bus. Of course, it doesn't make much sense, since pin 7 is used to drive the LAN1 led. It can either be done by setting the pins function to GPHY or GPIO + direction output. However, the pinctrl driver doesn't provide a way to switch a pin to GPIO. It is done indirectly by the pinctrl driver at the time a GPIO is requested (requesting a GPIO always resets the function to GPIO). Do it via pinmux driver, as it is always loaded first. Use the GPHY function as it's the pins intended purpose for this board. Fixes: FS#2895 Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: remove maintainer variable from targetsPetr Štetiar2020-03-161-1/+0
| | | | | | | | | | | | | There is no such role as target maintainer anymore, one should always send corresponding changes for the review and anyone from the commiters is allowed to merge them or eventually use the hand break and NACK them. Lets make it clear, that it is solely a community doing the maintenance tasks. Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Piotr Dymacz <pepe2k@gmail.com>
* lantiq: move mux for pins into subnodesMathias Kresin2020-03-153-115/+161
| | | | | | | | | | | The mux need to be defined in a subnode to be considered by the pinctrl framework. These muxes aren't set as expected and might cause not working subsystems. Fixes: 8e7b573b7aa4 ("lantiq: dts: assign the PCI pins to the PCI controller node") Fixes: dcb5e52209e5 ("lantiq: dts: assign the STP pins to the STP GPIO controller node") Fixes: 660200e53d62 ("lantiq: dts: assign the GPHY LED pins to the Ethernet controller node") Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: make kmod-i2c-core selected by dependent modulesSungbo Eo2020-03-131-1/+1
| | | | | | | | | | | | | | | | | | Currently kmod-i2c-* will not get into images unless kmod-i2c-core is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-hwmon-lm75 - kmod-i2c-gpio - kmod-i2c-gpio-custom - kmod-i2c-mux - kmod-i2c-ralink Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: image: move IMAGE_SIZE to image.mkSungbo Eo2020-03-111-2/+0
| | | | | | | | | | IMAGE_SIZE is widely used in many targets. Declare it in the default template to clean up redundant code. This also prevents deriving IMAGE_SIZE unintentionally from the previously defined device. While at it, remove duplicate KERNEL_SIZE declaration. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: remove non-existant symbols from 4.19 configAleksander Jan Bajkowski2020-02-223-9/+0
| | | | | | These symbols only exist in kernel version <= 4.15 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* lantiq: tidy up image/MakefileAdrian Schmutzler2020-01-241-7/+5
| | | | | | | This harmonizes indent for Build blocks and removes multiple empty lines. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: fix setting SOC to DEFAULT_SOCAdrian Schmutzler2020-01-241-0/+1
| | | | | | | | | This adds the missing assignment of DEFAULT_SOC to the SOC variable by default. Fixes: 09ee51c614d9 ("lantiq: define SOC only once for uniform targets") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 16:01:53 +0000