aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
Commit message (Collapse)AuthorAgeFilesLines
* kernel: update kernel 4.4 to version 4.4.8Álvaro Fernández Rojas2016-04-241-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* image / basefiles: make console password configurableJohn Crispin2016-04-181-1/+1
| | | | | Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: use dwc2 by default on all ar9 boardsJohn Crispin2016-04-267-9/+9
| | | | | | | | | | | | The dwc2 USB driver now works on Lantiq ar9, but the default is still ltq-hcd-ar9. This patch switches to dwc2 by default. v2: all ar9 boards (v1 was just for BTHOMEHUBV3A and WBMR) Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 49254
* lantiq: install uboot-envtools by default on BTHOMEHUBV3AJohn Crispin2016-04-261-1/+1
| | | | | | | | | | | | | The only way to access the u-boot console on the BTHOMEHUBV3A is by soldering a serial console onto some really tiny pads. To enable installation without soldering it would be helpful to be able to modify the uboot environment from within the ramdisk image used as part of the installation process. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 49253
* lantiq: remove read-only flag on two partitions on BTHOMEHUBV3AJohn Crispin2016-04-261-2/+0
| | | | | | | | | | | Remove read-only flag on two partitions on BTHOMEHUBV3A: uboot-config - otherwise fw_setenv command cannot be used. ath9k-cal - so that ath9k calibration data can be copied to the partition on a newly installed board. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 49250
* lantiq: Fix typo in LED diag script.John Crispin2016-04-261-1/+1
| | | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> Acked-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 49242
* lantiq: use new image build process for brnImagesJohn Crispin2016-04-261-14/+28
| | | | | | | | | | | | | | LZMA compress the kernel without dictionary, otherwise brnboot fails to uncompress the kernel. The filesystem parameter of mkbrncmdline was dropped since the used filesystem isn't exported in the kernel build step and at least in my tests everything works without the parameter. If the parameter is required for some reason, the static keyword "squashfs" can be used. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 49241
* lantiq: remove orphaned tp-link image build stepsJohn Crispin2016-04-261-22/+0
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 49239
* lantiq: build sysupgrade images for lantiqImageJohn Crispin2016-04-261-0/+2
| | | | | | | | Tested with VGV7510KW22NOR. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 49238
* lantiq: new image build process - fix kernel entry addressJohn Crispin2016-04-261-1/+1
| | | | | | | | | | | Set the kernel entry address to the same value as it is used for the old image build build process. Fixes boot of uImages on VGV7510KW22NOR and others. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 49237
* lantiq: use new image build process for some imagesJohn Crispin2016-04-211-90/+95
| | | | | | | | | | This adds for some easy images the new build process. This was only tested on some TP-Link devices, please test. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49210
* kernel: update kernel 4.4 to version 4.4.7Hauke Mehrtens2016-04-161-1/+1
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49176
* lantiq-dsl: add missing blank in dsl outputJohn Crispin2016-04-091-1/+1
| | | | | | | | blank inserted before ACTATP Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 49137
* lantiq-dsl: bugfix latency values swapped for lucistatJohn Crispin2016-04-091-2/+2
| | | | | | | | swapped wrong latency output Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 49136
* lantiq-dsl: bugfix db negative sign after commaJohn Crispin2016-04-091-1/+1
| | | | | | | | If db is negative minus sign was shown after comma Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 49135
* lantiq: lzma-loader: fix O32 ABI conformanceGabor Juhos2016-03-211-0/+3
| | | | | | | | | | | | | | | | | | | According to the calling convention of the o32 ABI the caller function must reserve stack space for $a0-$a3 registers in case the callee needs to save its arguments. The assembly startup code does not reserve stack space for these registers thus when the main C function needs to save its arguments, that will cause a stack overflow. Fix the assembly code to reserve stack space for the registers to avoid that. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 49061
* lantiq: use upstream mechanism to append device tree fileJohn Crispin2016-03-206-69/+91
| | | | | | | | | | | Instead of using our patch-dtb program just place the device tree behind the kernel binary and then let the in kernel mechanism fetch it. This also adds support for having the device tree file in the boot loader. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49050
* lantiq: print profile name in dsl lucistatFelix Fietkau2016-03-071-0/+1
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48949
* lantiq: add dsl firmware to default packagesFelix Fietkau2016-03-072-5/+5
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48942
* lantiq: do not set default firmware fileFelix Fietkau2016-03-071-1/+1
| | | | | | | | | We are now shipping a DSL firmware, do not set it by default to some file name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48941
* kernel: update kernel 4.4 to version 4.4.3Hauke Mehrtens2016-02-253-6/+6
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48783
* use "-gt" instead of ">" with [ in /lib/functions/lantiq_dsl.shJohn Crispin2016-02-121-2/+2
| | | | | | | | | Avoids inadvertent file creation when executing `/etc/init.d/dsl_control status`. Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> SVN-Revision: 48700
* lantiq: VGV7510KW22/VGV7519 update spi pinmux groupJohn Crispin2016-02-082-2/+2
| | | | | | | | | | | | | With the backport of the kernel 4.5 pinctrl-xway patches (3551609d & 826bca29) the pinmux group "spi" was splitted into "spi_di", "spi_do" & "spi_clk". But the no longer existing group "spi" is still used by some device tree source files. This fixes the detection of the wireless chipset of the VGV7510KW22. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48658
* lantiq: BTHOMEHUBV5A - explicit select the flash deviceJohn Crispin2016-02-081-1/+1
| | | | | | | | | | | | | The stock u-boot doesn't disable unused flash banks. Therefore, the nand driver tries to initialize a not connected NOR flash and the device hangs on boot. Workaround the issue by selecting the second flash bank (NAND). Signed-off-by: Mathias Kresin <openwrt@kresin.me> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48657
* lantiq: fix wrong parameter order in xway_nand driverJohn Crispin2016-02-081-1/+1
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48656
* lantiq: Make the ar9.dtsi sram node match "simple-bus"Felix Fietkau2016-01-291-1/+1
| | | | | | | | | | | All other SoC types are using "lantiq,sram" and "simple-bus" to ensure that all child nodes are set up correctly during linux kernel initialization (plat_of_setup(void) in arch/mips/lantiq/prom.c). Without this some of sram child nodes might not be parsed. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48548
* lantiq: Move the definition of the xrx200-net node to vr9.dtsiFelix Fietkau2016-01-2911-764/+669
| | | | | | | | | | This removes a lot of duplicate register and interrupt definitions by moving the xrx200-net definition to vr9.dtsi and making all devices re- use it. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48547
* lantiq: fix PHY state handling issueFelix Fietkau2016-01-291-0/+38
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48546
* base-files: remove default /etc/config/network, generate it via board.d insteadFelix Fietkau2016-01-251-5/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48493
* lantiq: Fix enabling CONFIG_MTD_UIMAGE_SPLITFelix Fietkau2016-01-201-1/+1
| | | | | | | | | | | | r48381 added CONFIG_MTD_SPLIT_UIMAGE_FW=Y to the lantiq kernel configuration. That unfortunately contains a typo since the "y" has to be lower-case. This leads to the kernel asking whether the config symbol should be enabled and thus breaking the build. FIXES: r48381/feab990887b4: lantiq: Enable the uImage mtd splitter Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48389
* lantiq: Enable the uImage mtd splitterFelix Fietkau2016-01-191-0/+1
| | | | | | | | | | | Until linux 4.1 the lantiq target used CONFIG_MTD_UIMAGE_SPLIT=y. That option however is only available until linux 4.3 - thus it was not added to lantiq's 4.4 kernel config (in r48307). This results in broken images for devices which are using uImages. This fixes #21652 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48381
* lantiq: add support for TP-Link VR200vHauke Mehrtens2016-01-184-0/+297
| | | | | | | | | This adds basic support for TP-Link VR200v. Currently the following parts are not working: FXO, Voice, DECT, WIFI (both) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48328
* lantiq: drop linux 4.1 supportFelix Fietkau2016-01-1839-21352/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48323
* lantiq: switch to linux 4.4Felix Fietkau2016-01-181-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48322
* lantiq: fix VDSL device detection with Linux 4.4Felix Fietkau2016-01-181-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48319
* lantiq: Add support for linux 4.4Felix Fietkau2016-01-1835-0/+18096
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches were dropped because they are already applied upstream: - 0038-MIPS-lantiq-fpi-on-ar9.patch - 0039-MIPS-lantiq-initialize-usb-on-boot.patch - 0042-USB-DWC2-big-endian-support.patch - 0043-gpio-stp-xway-fix-phy-mask.patch All other patches were simply refreshed, except the following: - 0001-MIPS-lantiq-add-pcie-driver.patch Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled some PMU gates for the vrx200 / VR9 SoCs) were removed since the upstream kernel disables unused PMU gates automatically (since 95135bfa7ead1becc2879230f72583dde2b71a0c "MIPS: Lantiq: Deactivate most of the devices by default"). - 0025-NET-MIPS-lantiq-adds-xrx200-net.patch Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers should use of_get_mac_address(). of_get_mac_address_mtd is not available for drivers anymore since it's called automatically within of_get_mac_address(). - 0028-NET-lantiq-various-etop-fixes.patch Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch While refreshing the kernel configuration SPI support had to be moved to config-4.4 because otherwise M25P80 was disabled. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48307
* lantiq: Remove incorrect PCIe compatible stringsFelix Fietkau2016-01-172-5/+0
| | | | | | | | | Re-defining the compatible property is not required since the correct value is inherited from vr9.dtsi. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48295
* lantiq: Remove the old SPI driver patchFelix Fietkau2016-01-171-1048/+0
| | | | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48294
* lantiq: Switch to the new SPI driverFelix Fietkau2016-01-1710-35/+94
| | | | | | | | | | | | | | | | Compared to the "old" driver: - Each device must assign a pinctrl setting to the SPI node to allow the new SPI driver to configure the SPI pins. While here we are also using separate input and output settings so we are independent of whether the bootloader configures the pins correctly. - We use the new "compatible" strings to make the driver choose the correct number of chip-selects for each SoC. - The new driver starts counting the chip-selects at 1 (instead of 0, like the old one did). Thus we have to adjust the devices accordingly. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48293
* lantiq: Add a rewritten version of the SPI driverFelix Fietkau2016-01-171-0/+1133
| | | | | | | | | | | | | The new driver provides a few improvements over the old one: - Separate compatible strings per SoC type (this allows removing some hardcoded of_device_is_compatible() checks) - It does not rely upon spi-bitbang anymore - chip-selects are numbered as in the datasheet (= starting at 1 instead of 0) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48292
* lantiq: Disable CONFIG_SPI_GPIOFelix Fietkau2016-01-172-2/+0
| | | | | | | | | All devices are now using the HW SPI driver, so this is not necessary anymore. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48291
* lantiq: Enable the hardware SPI driver on the DGN3500/DGN3500BFelix Fietkau2016-01-171-53/+38
| | | | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48290
* lantiq: Enable SPI for the EASY80920 board againFelix Fietkau2016-01-171-46/+41
| | | | | | | | Also switch to the SPI definition provided by vr9.dtsi Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48289
* lantiq: Switch FRITZ3370 from spi-gpio to the hardware SPI driverFelix Fietkau2016-01-171-40/+31
| | | | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48288
* lantiq: Re-use the SPI node from vr9.dtsi in TDW89X0.dtsiFelix Fietkau2016-01-171-40/+36
| | | | | | | | This removes the duplicate SPI register definition. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48287
* lantiq: Add the SPI node to ar9.dtsi and vr9.dtsiFelix Fietkau2016-01-172-0/+20
| | | | | | | | | | This allows devices to use SPI without having to re-define (and thus duplicating) the whole SPI node. By default SPI is disabled (as before) because only few devices need it. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48286
* lantiq: Configure the PCIe reset GPIO using OFFelix Fietkau2016-01-172-3/+111
| | | | | | | | | | | | | | | | | | | | | | | After the latest pinctrl backports there are only 50 (instead of 56 as before) GPIOs/pins exported (thus the first GPIO on VRX200 SoCs is now 462, before it was 456). This means that any hardcoded GPIOs have to be adjusted. This broke the PCIe driver (which seems to be the only driver which uses hardcoded GPIO numbers), it only reports: ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout pcie_rc_initialize link up failed!!!!! To prevent more of these issues in the future we remove the hardcoded PCIe reset GPIO definition and simply pass it via device-tree (like the PCI driver does). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48285
* lantiq: Use the new pinctrl compatible stringsFelix Fietkau2016-01-174-4/+4
| | | | | | | | | | | | | | | | These were introduced in upstream commit be14811c03cf "pinctrl/lantiq: introduce new dedicated devicetree bindings" and finally allow us to use the individual pins within our dts (for example spi_clk, etc.). Please note that this changes the number of GPIOs which are available for some SoCs. VRX200 SoCs for example only have 50 pins, but previously 56 pins were exposed. This means that all places which are using hardcoded GPIO numbers (which are not passed via device-tree) need to be adjusted (because the first GPIO number is now 462, instead of 456). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48284
* lantiq: Backport upstream pinctrl-xway patches from 4.5Felix Fietkau2016-01-175-28/+1436
| | | | | | | | | | | | | | | | Upstream commit be14811c03cf2 "pinctrl/lantiq: introduce new dedicated devicetree bindings" allows us to use each pin in the pinmux. This is useful for example in the "spi" group which contains some pins which are inputs, and some which are outputs. These can only be used once the new compatible strings for the pinctrl node are used. Additionally 0150-lantiq-pinctrl-xway.patch and the "GPIO PORT3 fix" (which was part of 0012-pinctrl-lantiq-fix-up-pinmux.patch) were replaced with their upstream variants which are also in 4.5. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48283
* lantiq: Fixed brnImage signature for the VGV7510KW22BRN imagesFelix Fietkau2016-01-171-1/+1
| | | | | | | | | | | | | The old signature only worked because brnboot ignores the leading "5" in the signature. We can see the correct signature when flashing a brnImage via recovery web-interface, in this case brnboot reports: [CGI-Signature Check] buf:[BRNDA6431], sigInFlash:[BRNDA6431] Thanks to Mathias Kresin for reporting this. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48269
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:04:58 +0000