aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/xrx200
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: add dsl firmware to default packagesFelix Fietkau2016-03-072-5/+5
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48942
* lantiq: add support for TP-Link VR200vHauke Mehrtens2016-01-181-0/+7
| | | | | | | | | This adds basic support for TP-Link VR200v. Currently the following parts are not working: FXO, Voice, DECT, WIFI (both) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48328
* lantiq: Switch to the new SPI driverFelix Fietkau2016-01-171-2/+1
| | | | | | | | | | | | | | | | Compared to the "old" driver: - Each device must assign a pinctrl setting to the SPI node to allow the new SPI driver to configure the SPI pins. While here we are also using separate input and output settings so we are independent of whether the bootloader configures the pins correctly. - We use the new "compatible" strings to make the driver choose the correct number of chip-selects for each SoC. - The new driver starts counting the chip-selects at 1 (instead of 0, like the old one did). Thus we have to adjust the devices accordingly. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48293
* lantiq: Disable CONFIG_SPI_GPIOFelix Fietkau2016-01-171-1/+0
| | | | | | | | | All devices are now using the HW SPI driver, so this is not necessary anymore. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48291
* lantiq: get rid of ltq-vdsl-fwJohn Crispin2015-12-111-1/+0
| | | | | | | | | Because of dsl-vrx200-firmware-xdsl-* there's no need anymore to download a dsl firmware at runtime. Signed-off-by: Andre Heider <a.heider@gmail.com> SVN-Revision: 47851
* lantiq: move esi calls to dsl_cpe_control scripts to fix ordering wrt. ↵Felix Fietkau2015-12-041-2/+1
| | | | | | | | loading vr9 drivers Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47764
* lantiq: Add target TP-Link TD-W8980John Crispin2015-10-051-0/+7
| | | | | | | | | The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47130
* lantiq: Add support for the BT Home Hub 5AJohn Crispin2015-07-071-0/+9
| | | | | | | | | | | | | | | u-boot support depends on the next "upstream" version ([0]) from Daniel Schwierzeck. Since the installation process is quite complicated a "how to" was added to the wiki: [1] [0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next [1] http://wiki.openwrt.org/toh/bt/homehub_v5a V2: Use the correct PCI interrupt (fixes 2.4GHz wifi) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 46223
* lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431)John Crispin2015-06-051-0/+14
| | | | SVN-Revision: 45897
* lantiq/xrx200: cleanup default packagesJohn Crispin2015-03-176-52/+21
| | | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44867
* lantiq: make xrx200 targets use the upstream dwc2 driverJohn Crispin2015-03-175-9/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44857
* lantiq: drop 3.14 supportJohn Crispin2015-03-161-68/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44812
* lantiq: enable atm-esi by default for xrx200Felix Fietkau2015-03-151-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44769
* kernel: move KERNFS to generic configJohn Crispin2015-03-061-1/+0
| | | | | | | | KERNFS symbol is selected by SYSFS, so place it in generic config. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44615
* kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLEDJohn Crispin2015-03-061-1/+0
| | | | | | | | | Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since only one platfrom (omap) needs them. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44614
* kernel: move MTD_SPLIT_SUPPORT to generic configJohn Crispin2015-03-061-1/+0
| | | | | | | | | | | CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform specific configs explicitly enables it, while no one platform disables this symbol. So place it in generic config and remove from platform specific configs. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44612
* kernel: remove GENERIC_NET_UTILS from platform configsJohn Crispin2015-03-061-1/+0
| | | | | | | | | | CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled in generic config, so we don't need this symbol in platform specific configurations. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44611
* kernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic configsJonas Gorski2015-03-011-1/+0
| | | | | | | | | Most MIPS targets have it disabled, so move the symbol to the generic configs to keep target configs small. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44583
* lantiq: PCI should be enabled on vrx200John Crispin2015-02-121-1/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44419
* lantiq: add 3.18 supportJohn Crispin2015-02-091-4/+21
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44348
* Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCKJohn Crispin2015-01-172-7/+23
| | | | | | | | Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43987
* vgv7519: fix profile, this board have a rt2800-pci boardJohn Crispin2014-10-301-2/+2
| | | | SVN-Revision: 43115
* lantiq - vgv7519: enable pci busJohn Crispin2014-10-061-1/+1
| | | | SVN-Revision: 42823
* lantiq: update to 3.14John Crispin2014-08-181-0/+70
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42188
* lantiq: generate unique ARV7519RW22 firmwareJohn Crispin2014-08-181-13/+3
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42183
* kernel: sort Kconfig options in kernel configsGabor Juhos2014-07-131-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41614
* lantiq: Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtargetJohn Crispin2014-07-011-0/+2
| | | | | | | | | | | | | Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget. These drivers are not needed for ASE, Danube and AR9. As side effect PHY11G and PHY22F firmwares are not included in the kernel image, which saves 64 KB. Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41449
* kernel: make sure the new UBIBLOCK symbol does not break buildsJohn Crispin2014-06-111-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41134
* kernel: add a NAND_SUPPORT symbolJohn Crispin2014-06-111-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41122
* lantiq: ARV7519RW22: several fixesJohn Crispin2014-04-161-6/+4
| | | | | | | | | | - Fix ethernet ports. - Clean DTS files. - WiFi is lantiq based (not supported yet), remove ath9k. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40519
* lantiq: there is a V2 of VG3503J that needs a newer fe phy firmwareJohn Crispin2014-04-071-0/+8
| | | | | | | | | this should really be auto detected by the kernel, lets used this workaround until the real solution is ready Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40418
* lantiq: fix vr9 ubi handlingJohn Crispin2014-04-033-2/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40364
* lntiq: add support for Astoria ARV7519RW.John Crispin2014-03-301-0/+22
| | | | | | | | | | | | | | | These patches add support for the Astoria ARV7519RW aka Livebox 2.1 The PCI and PCIe interfaces have been disabled. Also, because there are two revisions of this board with different GPHY firmwares, two targets were defined. V2: rewrote partitions to work with an u-boot specifically made for these boards. Signed off by: Esteban Benito <estebanjbs@gmail.com> Signed off by: Carles Gadea <carlesgrg@gmail.com> Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com> SVN-Revision: 40329
* lantiq: add support for ZyXEL P2812HNUFXJohn Crispin2014-03-301-0/+14
| | | | | | | | | | | This patch adds almost full support for this board. WiFi is still not working. The FXS ports are not functional due to missing support for the TAPI driver on VR9 SoC. Signed-off-by: Antonios Vamporakis <ant@area128.com> Tested-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 40317
* lantiq: add ubifs to FEATURESJohn Crispin2014-03-301-1/+1
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40315
* lantiq: xrx200: add ubi support in the kernelJohn Crispin2014-03-301-0/+17
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314
* lantiq: update kernel configurationLuka Perkov2014-01-151-1/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39296
* lantiq: experia v8 fixesJohn Crispin2013-10-071-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38328
* lantiq: fix fritz image generationJohn Crispin2013-10-071-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38326
* lantiq: add support for VGV7519 KPN Experia box v8John Crispin2013-09-301-0/+22
| | | | | | | Signed-off-by: Maikel Bloemendal <mbloemendal@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38266
* build: unify mips target cflagsFelix Fietkau2013-09-261-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38210
* lantiq: style fixesLuka Perkov2013-09-191-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38051
* lantiq: add v3.10 patchesJohn Crispin2013-09-171-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38031
* lantiq: add a subtarget for the xrx200 SoC familyJohn Crispin2013-09-176-0/+103
Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029