aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/base-files
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: vgv7519 - set some defaults for ledsJohn Crispin2014-11-141-0/+7
| | | | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43256
* lantiq: set default led configuration from /sys entry later, after per board ↵John Crispin2014-11-141-5/+5
| | | | | | | | settings Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43255
* lantiq: vgv7519: fix board_config on dts, read mac address and setJohn Crispin2014-10-291-0/+6
| | | | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43109
* lantiq_dsl.sh: properly detect vdsl_cpe_control and add missing quotesJohn Crispin2014-10-291-3/+7
| | | | | | | | | | lantiq_dsl.sh didn't work with VDSL chipsets for now, fix that by detecting whether vdsl_cpe_control or dsl_cpe_control should be used. Also add missing quotes around shell string comparision. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43101
* lantiq - vgv7519: load rt5362 eeprom from bootloader param patitionJohn Crispin2014-10-061-1/+1
| | | | SVN-Revision: 42824
* lantiq: led name has changed from adsl -> dslJohn Crispin2014-10-061-4/+4
| | | | | | | | | | make the notify script aware of this. https://dev.openwrt.org/ticket/18005 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42798
* Lantiq: fix build warning from dsl_fs scriptJohn Crispin2014-09-161-1/+1
| | | | | | | | | | | fix inclusion of functions.sh in dsl_fs init script without this, the following error is seen during build: ./etc/init.d/dsl_fs: line 4: /lib/functions.sh: No such file or directory Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> SVN-Revision: 42575
* lantiq: add default switch setup to td8970John Crispin2014-09-151-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42544
* lantiq: improve ARV7519RW22 supportJohn Crispin2014-08-181-1/+1
| | | | | | | | | | | | | - use full board name - rename uboot-env partition - add dsl_fw partition - remove unneeded pinmux groups - move gigabit ethernet to LAN - load mac address from mtd Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42180
* lantiq: detect board in preinit stateJohn Crispin2014-07-142-2/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41638
* lantiq: generate /tmp/sysinfo/lantiq_board_name if missingJohn Crispin2014-07-101-0/+2
| | | | | | | | | | | Run lantiq_board_detect from lantiq_board_name and lantiq_board_model. This was the one thing missing from r41474 for sysupgrade board detection to work properly. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41567
* lantiq: enable SysupgradeNAND for BTHOMEHUBV2BJohn Crispin2014-07-101-0/+10
| | | | | | | | | | | | | | | | | Enables SysupgradeNAND for BTHOMEHUBV2B. Depends on the following patches: http://patchwork.openwrt.org/patch/5817/ http://patchwork.openwrt.org/patch/5848/ http://patchwork.openwrt.org/patch/5851/ Many thanks everyone for your help the last couple of days. Ben Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41566
* lantiq: add support for /tmp/sysinfoJohn Crispin2014-07-025-8/+28
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41472
* target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGCJohn Crispin2014-06-021-1/+1
| | | | | | | | | | | | | | | | | | | ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915
* lantiq: support loading the dsl firmware from a flash partition as a raw ↵Felix Fietkau2014-05-061-5/+27
| | | | | | | | gzipped tarfile Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40715
* lantiq: more vdsl related cleanupsJohn Crispin2014-04-112-10/+23
| | | | | | | | | | | * atm module needs to be loaded before linux-atm * use absolute firmware paths * extended validation * add a script for mounting an optional firmware partition Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40460
* lantiq: move the dsl-modem config to network.@dsl-modem[-1]John Crispin2014-04-101-0/+32
| | | | | | | | make sure uci_defaults generates a proper uci config for the v/adsl modem Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40439
* lantiq: make dsl_notify.sh executableJohn Crispin2014-04-091-0/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40436
* lantiq: cleanup the dsl control scriptsJohn Crispin2014-04-052-0/+305
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40381
* lantiq: BT Home Hub 2B support - userspaceJohn Crispin2014-04-032-0/+12
| | | | | | | | Basic userspace configuration for BT Home Hub 2B Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40371
* lntiq: add support for Astoria ARV7519RW.John Crispin2014-03-301-0/+5
| | | | | | | | | | | | | | | These patches add support for the Astoria ARV7519RW aka Livebox 2.1 The PCI and PCIe interfaces have been disabled. Also, because there are two revisions of this board with different GPHY firmwares, two targets were defined. V2: rewrote partitions to work with an u-boot specifically made for these boards. Signed off by: Esteban Benito <estebanjbs@gmail.com> Signed off by: Carles Gadea <carlesgrg@gmail.com> Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com> SVN-Revision: 40329
* lantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22)John Crispin2014-03-301-4/+13
| | | | | | | | | | | | | | | | | | | | ARV7510PW22, ARV752DPW and ARV752DPW22 have the RT2860 eeprom stored in flash as big-endian, but the driver needs it in little-endian format. We have to swab it before handing it over. This requires my earlier patch for busybox. Funnily enough, ARV752DPW works also with the incorrect eeprom, but undoubtedly unoptimally. I have a hunch that also the final remaining Lantiq board would require this swabbing, but I'm not sure, so I just swab it in the three boards that I know about. v2: * Swab also on ARV7510PW22 based on feedback from Alvaro Rojas * Fix the offset with bs=2 Signed-off-by: Matti Laakso <malaakso at elisanet.fi> SVN-Revision: 40328
* lantiq: add esiJohn Crispin2014-03-301-0/+7
| | | | | | | | http://patchwork.openwrt.org/patch/3703/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40326
* lantiq: fix initial VLAN conf for P2601HNFXJohn Crispin2014-03-301-2/+3
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40321
* lantiq: add support for Arcadyan ARV7519PWJohn Crispin2014-03-302-1/+10
| | | | | | | | | | | This patch adds almost full support for this board. - WiFi is still not working - USB will not power up. According to some reports, it may be a passive port Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40319
* lantiq: add support for ZyXEL P2812HNUFXJohn Crispin2014-03-301-0/+6
| | | | | | | | | | | This patch adds almost full support for this board. WiFi is still not working. The FXS ports are not functional due to missing support for the TAPI driver on VR9 SoC. Signed-off-by: Antonios Vamporakis <ant@area128.com> Tested-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 40317
* lantiq: Add support for Astoria ARV7510PW22John Crispin2014-01-152-2/+2
| | | | | | | | This board is pretty similar to ARV752DPW22. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 39303
* lantiq: improve Arcadyan ARV4510PW supportJohn Crispin2014-01-121-4/+12
| | | | | | | | | Arcadyan ARV4510PW has already a build profile in OpenWrt, but it is severely lacking. This patch brings it up-to-date. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 39230
* lantiq: DGN3500 fixupsJohn Crispin2013-11-111-0/+2
| | | | | | | | Just fixing up a few things for the Netgear DGN3500. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 38733
* lantiq: remove old hotplug handlerJohn Crispin2013-11-111-53/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38727
* lantiq: fix TDW8970 lan/wan macJohn Crispin2013-11-071-1/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38677
* lantiq: Fix ar8216 switch configuration for WBMR-HP-G300H devicesJohn Crispin2013-11-071-2/+3
| | | | | | | | | | | The switch is renamed to "switch0" in newer (3.10) linux kernels. Configure the switch using vlans by default and only configure the physical switch ports that are present. Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38673
* lantiq: fix up diag.shJohn Crispin2013-10-081-2/+0
| | | | | | | | init no longer exists as a parameter Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38342
* lantiq: add support for ZyXEL P2601HNFXLuka Perkov2013-09-191-0/+6
| | | | SVN-Revision: 38049
* lantiq: add support for ZTE H201LLuka Perkov2013-09-192-0/+6
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38048
* lantiq: add v3.10 patchesJohn Crispin2013-09-171-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38031
* lantiq: add tplink header id to sysupgrade and fix a commentJohn Crispin2013-08-061-1/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37719
* lantiq: add (incomplete) support for Aztech GR7000Luka Perkov2013-08-061-0/+6
| | | | | | | | | | *) can not connect to switch chip *) only one usb port is working *) wifi is not working Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37712
* lantiq: several a803 related fixesJohn Crispin2013-08-052-2/+2
| | | | | | | | based on work from Matti Laasko that he posted in the wiki Signed-off-by: John Crispin <blogic@openwrt.or SVN-Revision: 37704
* lantiq: fix VG3503J ethernet/gphy led supportJohn Crispin2013-08-012-5/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37634
* lantiq: add a hook to make leds work on the secondary usb busJohn Crispin2013-07-251-1/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37538
* lantiq: update ralink wlan firmware hotplug script for new eeprom sizeFelix Fietkau2013-07-151-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37334
* lantiq: diag.sh with both red and green power LEDsJohn Crispin2013-06-101-0/+20
| | | | | | | | | | This provides a boot LED sequence suitable for devices with both red and green LEDs for power. This assumes no "default-on" settings in the device tree. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36899
* lantiq: Fix ar8216 switch configurationJohn Crispin2013-05-301-2/+2
| | | | | | | | On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36782
* lantiq: DGN3500 supportJohn Crispin2013-05-302-19/+5
| | | | | | | | | This requires all the preceding patches and finishes support for the DGN3500, also removing an obsolete file. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36781
* lantiq: fix LED-handling oversightsJohn Crispin2013-05-301-1/+1
| | | | | | | | | This reassigns the PPPoE status to the LED that was intended to indicate it, rather than the DSL sync light. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36777
* lantiq: make leds and network work on VG3503JJohn Crispin2013-04-252-0/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36445
* lantiq: fix board detection helpersJohn Crispin2013-04-251-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36444
* Adapt default network configuration for IPv6Steven Barth2013-04-091-0/+4
| | | | SVN-Revision: 36278
* Migrate lantiq platform to common led helper functionsJohn Crispin2013-04-031-29/+11
| | | | | | | | http://patchwork.openwrt.org/patch/3316/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 36187