aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/base-files
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: use devicename:colour:function led naming schemeJohn Crispin2016-01-011-4/+4
| | | | | | | | | | | | | | | | The leds of the following boards are not renamed due to lack of manuals/informations: - ARV7519PW - ARV7510PW22 - ARV4510PW The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't match the leds from the manual or pictures (e.g. there shouldn't be a wps led). Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48042
* lantiq: add support for indicating the boot state using three ledsJohn Crispin2016-01-012-54/+16
| | | | | | | | | | | | | | The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to indicate the current boot state. This patch adds support for such cases. The existing led sequences should be the same as before. Boards which are using a led different from power (like TDW89x0) are changed to switch of the led after boot Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48041
* lantiq: use dsl led defined in DTSJohn Crispin2016-01-012-15/+18
| | | | | | | | | | | | | | | | | dsl_control (dsl_notify.sh) is the only process which is aware of the state of the atm/ptm interface. Use the dsl led exclusive for the dsl line state. On boards which don't have a distinct internet and a dsl led, let the netdev status of the atm interface trigger the shared led. Triggering the shared led according to the status of the ppp interface isn't suitable, since the led would be switched of if the ppp connection goes down, but the line is still in sync. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48040
* lantiq: use power leds defined in DTSJohn Crispin2016-01-011-15/+19
| | | | | | | | Use the power leds defined in the dts file instead of hardcoded led names. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48039
* lantiq: use default leds defined in DTSJohn Crispin2016-01-012-20/+23
| | | | | | | | | | | | | Remove all now double defined leds from the led board file. Use pppoe as default for all broadband connections, since it's the default in OpenWrt now. Rename the the wifi leds to make sure, the not applicable default values get overwritten. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48038
* lantiq: BTHOMEHUBV2B - remove missing usb led workaroundJohn Crispin2016-01-011-1/+0
| | | | | | | | The workaround shouldn't be in the default configuration. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48032
* lantiq: Fix LED handling.John Crispin2015-12-171-24/+32
| | | | | | | | | | - Use common OpenWrt blink patterns instead of custom ones - Add preinit_regular hook - Handle the TDW89X0 that does not have a configurable power LED Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 47914
* all: drop old uci-defaults.shJo-Philipp Wich2015-12-112-2/+2
| | | | | | | | | Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867
* lantiq: fix led setup after switch to uci-defaults-new.shJohn Crispin2015-12-111-6/+7
| | | | | | | | | | | | | | | | | | | | | | | The switch to uci-defaults-new.sh revealed a bug in the former used uci-defaults.sh, which failed to add leds with colons in the led name. This bug isn't any longer present in uci-defaults-new.sh and therefore all via DT defined leds will be added to /etc/config/system with their initial on/off state, regardless whether they are already added by the board specific led mappings. This results for a BTHOMEHUBV5A into the following led configuration: - soc:blue:power is added as led_power with the initial state "switched on" - soc:blue:power is added as led_soc_blue_power with the initial state "switched off" With the final result of a switched off power led after boot. The only led that needs to be added is the BTHOMEHUBV5A specific dimmed led. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47850
* lantiq: fix logic error in dsl board.d codeJo-Philipp Wich2015-12-061-1/+1
| | | | | | | | | | | Starting with r47755 the pppoe wan interface section isn't any longer added to the network config on firstboot, using the default configuration. Since the commit message does not mention such a change, I assume that this wasn't intentionally. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47793
* lantiq: add VDSL2 vectoring status informationFelix Fietkau2015-12-051-1/+12
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47785
* lantiq: get rid of the dsl_fw mtd partitionFelix Fietkau2015-12-051-35/+0
| | | | | | | | | Now that we have redistributable vdsl/adsl firmware blobs in /lib/firmware, we can drop the dsl_fw partition and extend the firmware partition. Signed-off-by: Andre Heider <a.heider@gmail.com> SVN-Revision: 47783
* lantiq: move esi calls to dsl_cpe_control scripts to fix ordering wrt. ↵Felix Fietkau2015-12-041-7/+0
| | | | | | | | loading vr9 drivers Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47764
* lantiq: switch from uci-defaults to board.dJo-Philipp Wich2015-12-043-214/+154
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47755
* lantiq: Synchronize access to the DSL command pipeJohn Crispin2015-10-191-0/+2
| | | | | | | | | | Whenever two processes were executing different commands at the same time then one of the commands sometimes got the response of the other command. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 47213
* lantiq: bugfix wrong non pre-emptive crc errors outputJohn Crispin2015-10-111-1/+1
| | | | | | | | | This patch fixes a wrong non pre-emptive crc errors output of dsl_control.sh status. Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com> SVN-Revision: 47172
* lantiq: bugfix luci lantiq_dsl statusJohn Crispin2015-10-071-25/+25
| | | | | | | | Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> Signed-off-by: Helge Mader <hmader@tdt.de> Reported-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47152
* lantiq: several ARV7519RW22 fixesJohn Crispin2015-10-052-0/+8
| | | | | | | | | | | | | | Fixes ARV7519RW22 flash register (only 1 flash). Power LED is green, not red. Rename message LEDs to internet. Add LEDs configuration (lan, wan, power). Enable switch VLANs. Fix secondary USB. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> SVN-Revision: 47132
* lantiq: Add target TP-Link TD-W8980John Crispin2015-10-051-1/+1
| | | | | | | | | The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47130
* lantiq: bugfix uninitialized variablesJohn Crispin2015-10-051-0/+2
| | | | | | | Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> Reported-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 47127
* lantiq: update list on NAND devices in platform_pre_upgradeRafał Miłecki2015-09-151-1/+1
| | | | | | | | Meanwhile BTHOMEHUBV5A board was added. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46941
* lantiq: add platform_pre_upgrade for sysupgradeJohn Crispin2015-09-151-0/+10
| | | | | | | | | | | | | | | | | | | | As explained in recent sysupgrade/nand.sh commits, current NAND sysupgrade is a bit misleading because of nand_do_platform_check behavior. It leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. Please note that because of current nand_upgrade_stage1 implementation this patch doesn't change any behaior yet. It only prepares lantiq target for changing nand_do_platform_check (it will be possible after preparing all other targets as well). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46939
* lantiq: get more status information from xDSLJohn Crispin2015-09-141-12/+400
| | | | | | | | | Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> Signed-off-by: Helge Mader <hmader@tdt.de> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Andre Heider <a.heider@gmail.com> SVN-Revision: 46917
* lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)John Crispin2015-07-072-1/+8
| | | | | | | | lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V) Signed-off-by: Jannis Pinter <jannis@pinterjann.is> SVN-Revision: 46224
* lantiq: Add support for the BT Home Hub 5AJohn Crispin2015-07-074-2/+61
| | | | | | | | | | | | | | | u-boot support depends on the next "upstream" version ([0]) from Daniel Schwierzeck. Since the installation process is quite complicated a "how to" was added to the wiki: [1] [0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next [1] http://wiki.openwrt.org/toh/bt/homehub_v5a V2: Use the correct PCI interrupt (fixes 2.4GHz wifi) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 46223
* lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431)John Crispin2015-06-053-0/+26
| | | | SVN-Revision: 45897
* lantiq: td-w8970: fix failsafe modeJohn Crispin2015-02-091-0/+18
| | | | | | | | Fix failsafe mode for TD-W8970, register interface for preinit. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44353
* lantiq: DGN3500 cleanupsJohn Crispin2015-01-181-2/+0
| | | | | | | | | This patch builds on the previous three to streamline support for the Netgear DGN3500. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 44032
* lantiq: Fix initscript issueJohn Crispin2015-01-181-1/+1
| | | | | | | | | Currently this initscript fails if the macaddr has any leading zeroes. This patch corrects the problem. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 44029
* Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCKJohn Crispin2015-01-173-2/+11
| | | | | | | | Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43987
* lantiq: BT Home Hub 3A - userspaceJohn Crispin2015-01-083-2/+7
| | | | | | | | BT Home Hub 3A - userspace Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 43879
* lantiq: Fix adsl led on Home Hub 2BJohn Crispin2015-01-081-1/+1
| | | | | | | | This fixes the adsl led on the Home Hub 2B. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 43876
* lantiq: vgv7519 - set some defaults for ledsJohn Crispin2014-11-141-0/+7
| | | | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43256
* lantiq: set default led configuration from /sys entry later, after per board ↵John Crispin2014-11-141-5/+5
| | | | | | | | settings Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43255
* lantiq: vgv7519: fix board_config on dts, read mac address and setJohn Crispin2014-10-291-0/+6
| | | | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43109
* lantiq_dsl.sh: properly detect vdsl_cpe_control and add missing quotesJohn Crispin2014-10-291-3/+7
| | | | | | | | | | lantiq_dsl.sh didn't work with VDSL chipsets for now, fix that by detecting whether vdsl_cpe_control or dsl_cpe_control should be used. Also add missing quotes around shell string comparision. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43101
* lantiq - vgv7519: load rt5362 eeprom from bootloader param patitionJohn Crispin2014-10-061-1/+1
| | | | SVN-Revision: 42824
* lantiq: led name has changed from adsl -> dslJohn Crispin2014-10-061-4/+4
| | | | | | | | | | make the notify script aware of this. https://dev.openwrt.org/ticket/18005 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42798
* Lantiq: fix build warning from dsl_fs scriptJohn Crispin2014-09-161-1/+1
| | | | | | | | | | | fix inclusion of functions.sh in dsl_fs init script without this, the following error is seen during build: ./etc/init.d/dsl_fs: line 4: /lib/functions.sh: No such file or directory Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> SVN-Revision: 42575
* lantiq: add default switch setup to td8970John Crispin2014-09-151-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42544
* lantiq: improve ARV7519RW22 supportJohn Crispin2014-08-181-1/+1
| | | | | | | | | | | | | - use full board name - rename uboot-env partition - add dsl_fw partition - remove unneeded pinmux groups - move gigabit ethernet to LAN - load mac address from mtd Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42180
* lantiq: detect board in preinit stateJohn Crispin2014-07-142-2/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41638
* lantiq: generate /tmp/sysinfo/lantiq_board_name if missingJohn Crispin2014-07-101-0/+2
| | | | | | | | | | | Run lantiq_board_detect from lantiq_board_name and lantiq_board_model. This was the one thing missing from r41474 for sysupgrade board detection to work properly. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41567
* lantiq: enable SysupgradeNAND for BTHOMEHUBV2BJohn Crispin2014-07-101-0/+10
| | | | | | | | | | | | | | | | | Enables SysupgradeNAND for BTHOMEHUBV2B. Depends on the following patches: http://patchwork.openwrt.org/patch/5817/ http://patchwork.openwrt.org/patch/5848/ http://patchwork.openwrt.org/patch/5851/ Many thanks everyone for your help the last couple of days. Ben Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41566
* lantiq: add support for /tmp/sysinfoJohn Crispin2014-07-025-8/+28
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41472
* target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGCJohn Crispin2014-06-021-1/+1
| | | | | | | | | | | | | | | | | | | ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915
* lantiq: support loading the dsl firmware from a flash partition as a raw ↵Felix Fietkau2014-05-061-5/+27
| | | | | | | | gzipped tarfile Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40715
* lantiq: more vdsl related cleanupsJohn Crispin2014-04-112-10/+23
| | | | | | | | | | | * atm module needs to be loaded before linux-atm * use absolute firmware paths * extended validation * add a script for mounting an optional firmware partition Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40460
* lantiq: move the dsl-modem config to network.@dsl-modem[-1]John Crispin2014-04-101-0/+32
| | | | | | | | make sure uci_defaults generates a proper uci config for the v/adsl modem Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40439
* lantiq: make dsl_notify.sh executableJohn Crispin2014-04-091-0/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40436