aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood/files/arch/arm/boot
Commit message (Collapse)AuthorAgeFilesLines
* kirkwood: add support for Iomega Storcenter ix4-200dSander van Deijck2023-05-201-0/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Iomega Storcenter ix4-200d is a four-bay SATA NAS powered by a Marvell Kirkwood SoC clocked at 1.2GHz. It has 512MB of RAM and 32MB of flash memory, 3x USB 2.0 and 2x 1Gbit/s NIC Specification: - SoC: Marvell Kirkwood 88F6281 - CPU/Speed: 1200Mhz - Flash size: 32 MiB - RAM: 512MB - LAN: 2x 1Gbit/s - 3x USB 2.0 Notes: - The blue drive LED is triggered by HDD activity, it can not be controlled via GPIO. - The LCD screen requires proprietary code and does not function at this time. - Due to a kernel-related issue with the Marvell 88SE6121 SATA controller, currently only trays numbered #3 and #4 work, #1 and #2 do not. [1] Serial pinout: CN4 -------------- | 10 8 6 4 2 | | 9 7 5 3 1 | -------------- PIN 1 Mark (fat line) 1 = RXD 4 = TXD 6 = GND 9 = 3.3V (not necessary to connect) Installation instructions: 1. download initramfs-uImage and copy into tftp server 2. connect the tftp server to network port #1 3. access uboot environment with serial cable and run setenv mainlineLinux yes setenv arcNumber 1682 setenv console 'console=ttyS0,115200n8' setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)' setenv bootargs_root 'root=' setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.2 tftpboot 0x00800000 [initramfs-uImage filename] bootm 0x00800000 4. connect to LAN on network port #2, log into openwrt and sysupgrade to install into flash [1] https://bugzilla.kernel.org/show_bug.cgi?id=216094 Signed-off-by: Sander van Deijck <sander@vandeijck.com> (aligned FROM from signed-off. LED+key rename, whitespace removal) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kirkwood: Replace dtses with upstream acceptedPawel Dembicki2023-05-143-792/+0
| | | | | | | | | | | | DTSes from of three boards was sent and accpeted upstream. Let's use backport patches with small OpenWrt tweak like other upstream stuff. List of boards: - Zyxel NSA310S - Endian 4i Edge 200 - Ctera C-200 V1 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* treewide: remove label = "cpu" from DSA dt-bindingArınç ÜNAL2023-02-262-2/+0
| | | | | | | This is not used by the DSA dt-binding, so remove it from all devicetrees. Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9cc115d8d6f73dd260de1609182f3645844d6907 Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* kirkwood: fix dts whitespaceFelix Baumann2023-02-091-1/+1
| | | | | | Replace blanks with tabs Signed-off-by: Felix Baumann <felix.bau@gmx.de>
* kirkwood: add support for ipTIME NAS1Sungbo Eo2022-01-291-0/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipTIME NAS1 is a 1-bay NAS, based on Marvell Kirkwood SoC. Specifications: * SoC: 88F6281 * RAM: 256 MiB * Flash: SPI NOR 16 MiB * SATA: 1x 3Gb/s * Ethernet: 1x 1GbE * USB: 1x 2.0 * Fan: 2 speed level * UART: JP1 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Notes: * There are several variants of the model name: "NAS-I", "NASI", "NAS1". Here "NAS1" is adopted for consistent naming scheme. * The reset button is also a USB copy button in stock FW, but in this patch the former is the only default behavior. Installation via web interface: 1. Flash sysupgrade image through the stock web interface. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: add support for two clones from EndianPawel Dembicki2021-12-291-0/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | They are Endian 4i Edge 200 and his clone Endian UTM Mini. Hardware: - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - NAND Flash: 512MB (Micron 29F4G08AAC) - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2) - Lan 5: 1x GBE (Marvell 88E1116R-NNC1) - Storage: MicroSD Slot - WLAN: MiniPCIe Slot present, and fitted with SparkLan WPEA-110N/E (Atheros AR9280 chipset) (ONLY Endian UTM Mini WLAN) - USB: 1x USB 2.0 port - Console: RJ-45 port - LEDs: 3x GPIO controlled Notes: - WLAN led (Endian UTM Mini) is drived by MPCIE card Installation by TFTP + serial: - Setup TFTP server and copy initramfs image - Connect serial console - Stop booting in u-boot - Do: setenv bootargs 'console=ttyS0,115200n8 earlyprintk' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.2 tftpboot 0x1200000 openwrt-kirkwood-endian_4i-edge-200-initramfs-uImage bootm 0x1200000 - copy sysupgrade image via ssh. - run sysupgrade Installation by USB + serial: - Copy initramfs image to fat32 usb drive - Connect pendrive to USB 2.0 front socket - Connect serial console - Stop booting in u-boot - Do: setenv bootargs 'console=ttyS0,115200n8 earlyprintk' saveenv usb reset fatload usb 0:1 0x1200000 openwrt-kirkwood-endian_4i-edge-200-initramfs-uImage bootm 0x1200000 - copy sysupgrade image via ssh. - run sysupgrade Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: add support for Ctera C200 V1 NASPawel Dembicki2021-12-041-0/+303
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2-Bay NAS - maximum two 3.5" Harddisks Hardware: - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - NAND Flash: 256MB (Samsung 216 K9F2G08U0C) - Lan: 1x GBE (Marvell 88E1116R-NNC1) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 2.0 port - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Known issues: - Buzzer is unused due lack of proper driver Installation: - Apply factory initramfs image via stock web-gui. - Do sysupgrade to make installation complete. Back to stock: - OpenWrt rootfs partition use unused space after stock firmware. - Full revert is possible. - Login via ssh and run: ctera_c200-v1_back_to_factory Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run> [apply sorting to device recipe] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kirkwood: increase kernel size of LinksysesPawel Dembicki2021-09-131-6/+6
| | | | | | | | | | | | | | Linksyses Audi EA3500 and Viper E4200/E4500 have too small kernel partition size when kernel 5.10 is used. This patch change kernel partition to maximum size allowed by u-boot. Kernel size is overlapping rootfs now, like mvebu Linksyses and stock partition table. It fix back to stock via sysupgrade, which was broken since 18.06. Fixes: 9808b9ae02 ("kirkwood: switch to kernel 4.9") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kirkwood: rename files-5.4 to filesSungbo Eo2021-02-197-0/+973
Move local DTS files from "files-5.4" to "files" directory so kernel 5.10 can use it. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-22 08:12:51 +0000