aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood/base-files
Commit message (Collapse)AuthorAgeFilesLines
* kirkwood/dockstar: use ubi(kernel, squashfs, ubifs) imagesLuka Perkov2016-03-141-0/+14
| | | | | | | | | | | | | | | | | | | The new image requires `bootz` because of devicetree appending. To flash a new image boot initramfs: tftpboot 0x800000 openwrt-kirkwood-dockstar-initramfs-kernel.bin bootz 0x800000 # detach if already attached ubidetach -p /dev/$(grep ubi /proc/mtd|awk -F: '{print $1}') # scp openwrt-kirkwood-dockstar-squashfs-factory.bin /tmp ubiformat -f /tmp/openwrt-kirkwood-dockstar-squashfs-factory.bin # attach is important to resize rootfs_data otherwise it wont boot ubiattach -p /dev/$(grep ubi /proc/mtd|awk -F: '{print $1}') Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49010
* all: drop old uci-defaults.shJo-Philipp Wich2015-12-112-2/+2
| | | | | | | | | Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867
* all: remove redundant board.d/00_model filesJo-Philipp Wich2015-12-041-13/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47753
* kirkwood: add missing board_config_flush(), remove dead codeJo-Philipp Wich2015-12-031-20/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47745
* kirkwood, ipq806x: fix board.d script permissionsJo-Philipp Wich2015-12-033-0/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47735
* kirkwood: switch from uci-defaults to board.dJo-Philipp Wich2015-12-033-20/+33
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47733
* kirkwood: add diag LED on Linksys EA3500Luka Perkov2015-11-101-0/+3
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47435
* kirkwood: support sysupgrade on Linksys EA[34]500Luka Perkov2015-11-102-0/+111
| | | | | | | | | | This automatically writes to the alternate firmware partition (on Linksys's dual firmware layout) using code borrowed from the WRT1900AC port. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47434
* kirkwood: support Linksys boot counter on EA[34]500Luka Perkov2015-11-101-0/+20
| | | | | | | | | | | | | This is done with existing code from the WRT1900AC port. It makes sure the "auto_recovery" bootloader option is set, and resets the s_env boot counter after a successful boot. This gives users without a serial console connection some measure of safety. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47433
* kirkwood: consistently use engineering board namesLuka Perkov2015-11-104-12/+12
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47430
* kirkwood: pogo_e02: use mainline led definitionsLuka Perkov2015-11-041-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47385
* kirkwood: add initial support for NSA310sLuka Perkov2015-11-012-0/+5
| | | | | | | Signed-off-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47330
* kirkwood: add support for the Seagate GoflexHomeLuka Perkov2015-05-084-0/+7
| | | | | | | | Add Support for the Seagate GoflexHome <http://wiki.openwrt.org/toh/seagate/goflexhome> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 45647
* kirkwood: Seagate GoFlex NetLuka Perkov2015-02-124-9/+17
| | | | | | | | | Add GoFlex Net "Board Name" , set and cleanup network default and LEDs. Remove kmod-rtc-marvell from default packages, as the GoFlex net does not have a RTC. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 44422
* targets: base-files: diag.sh does not need to be executableLuka Perkov2015-02-071-0/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44305
* kirkwood: drop port-based VLAN setupLuka Perkov2015-01-251-19/+6
| | | | | | | | | | | | | | | | | Using port-based VLANs depends on a non-standard swconfig parameter, which compilcates things like LuCI that don't know about it. This patch changes the default to use 802.1q VLANs internally in the switch, but without tagging packets since we have two Ethernet ports. iperf3 tests indicate no difference in performance versus port-based VLANs when the CPU port is not using tags. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44122
* kirkwood: enable switch on Linksys EA3500Luka Perkov2015-01-181-0/+3
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44036
* target: kirkwood: fix leds defaults configJohn Crispin2015-01-171-11/+11
| | | | | | | | Fix missing parameters in 01_leds Signed-off-by: Gerald Kerma <dreagle@doukki.net> SVN-Revision: 44007
* kirkwood: add *plugs to uci-defaultsLuka Perkov2014-12-192-0/+14
| | | | | | | | | | | | | Set defaults health led to a timer heartbeet (200/800) and populate network for: - GuruplugServerPlus - SheevaPlug - SheevaPlug with eSATA Signed-off-by: Gerald Kerma <dreagle@doukki.net> SVN-Revision: 43752
* kikwood: populate kirkwood.sh with new boardsLuka Perkov2014-12-181-0/+12
| | | | | | | | | | - SheevaPlug - SheevaPlug with eSATA - GuruplugServerPlus Signed-off-by: Gerald Kerma <dreagle@doukki.net> SVN-Revision: 43751
* kirkwood: set default EA4500 switch configLuka Perkov2014-12-181-0/+16
| | | | | | | | | | | This maps the LAN ports to eth0 and WAN port to eth1. Since there are two interfaces the 802.1q VLAN mode is unnecessary and left disabled. Port-based VLANs are used instead. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43750
* add "preinit_regular" diag.sh set_state argumentJohn Crispin2014-12-151-0/+3
| | | | | | | | | | | | This new argument is used right after starting regular preinit (which happens if failsafe wasn't triggered). The main purpose of "preinit" argument is to indicate that failsafe can be triggered, however we were missing a way to inform user that we don't wait for a trigger anymore. With this change it's clear when failsafe mode can be triggered. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43715
* kirkwood: add a diag scriptJohn Crispin2014-12-071-0/+29
| | | | | | | | Currently only Linksys EA4500 is supported. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 43543
* kirkwood: add support for Linksys EA3500Luka Perkov2014-11-103-0/+10
| | | | | | | | http://wiki.openwrt.org/toh/linksys/ea3500 Signed-off-by: Dan Walters <dan@walters.io> SVN-Revision: 43230
* kirkwood: move kirkwood.sh to /lib/ for consistencyLuka Perkov2014-06-263-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 41338
* kirkwood: base-files: use /lib/functions/kirkwood.shLuka Perkov2014-06-242-13/+23
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 41336
* kirkwood: base-files: add script to detect board name and populate /tmp/sysinfoLuka Perkov2014-06-241-0/+58
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 41335
* kirkwood: add support for Linksys EA4500Luka Perkov2014-05-282-2/+9
| | | | | | | Support is added only for kernel 3.14 - do not show it until the switch is made. Following uboot env changes are needed to make it work on stock uboot:
* kirkwood: update support for dockstarLuka Perkov2014-02-151-3/+3
| | | | | | | | | | | | | | | | The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0xfe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> Tested-by: Alexander Couzens <lynxis@fe80.eu> CC: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39593
* kirkwood: update support for iconnectLuka Perkov2014-02-151-1/+3
| | | | | | | | | | | | | | | | | | Previous patch was pushed due to false user report. While at it fix alphabetic ordering. The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0x1fe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> CC: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39591
* kirkwood: add userland support for Pogoplug E02Luka Perkov2013-10-312-0/+7
| | | | | | | | | This patch adds the userland support for the Pogoplug E02 by Cloud Engines, Inc. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 38631
* kirkwood: upgrade to 3.10.15Luka Perkov2013-10-143-21/+8
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38402
* Adapt default network configuration for IPv6Steven Barth2013-04-091-0/+4
| | | | SVN-Revision: 36278
* all targets: use numerically prefixed uci-defaults file names to better ↵Jo-Philipp Wich2013-01-182-0/+0
| | | | | | control order of execution SVN-Revision: 35217
* kirkwood: fix typo in uci-defaults/ledsLuka Perkov2012-06-131-1/+1
| | | | | | Signed-off-by: Martin Mueller <mm@sig21.net> SVN-Revision: 32343
* kirkwood: use the generic uci-default functions for initial LED setupGabor Juhos2012-05-291-38/+4
| | | | SVN-Revision: 31994
* kirkwood: use uci-defaults to configure different boardsGabor Juhos2012-05-293-0/+104
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> SVN-Revision: 31990