aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x
Commit message (Collapse)AuthorAgeFilesLines
* ipq806x: add support for TP-Link Archer VR2600vSebastian Quilitz2016-11-248-2/+467
| | | | | | | | | | | | | | | | | | This router is similar to the C2600. Ethernet on WAN + LAN, switch, sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem and the POTS/DECT interface are not supported yet. It is not possible to flash LEDE via the TP-Link webinterface. The image need to be signed. The first 0x200 bytes of the image is the TP-Link header including the signature. The signature is not validated by the bootloader. The LEDE image is zeroed in this area. To install LEDE it is necessary to solder a four pin header to JP2. Connect a serial interface to this header and interrupt the autostart of kernel. Transfer the sysupgrade image via TFTP and write it to the serial flash at 0x320000. Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de>
* ipq806x: c2600: change wan and lan led trigger to swconfig portHenryk Heisig2016-11-211-2/+2
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ipq806x: enable swconfig LED supportHenryk Heisig2016-11-211-0/+1
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ipq806x: switch to upstream usb driver and backport fixesPavel Kubelun2016-11-2118-23/+1094
| | | | | | Also removing fifo-resize property drom DT as it has been removed from the driver. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: remove device specific sysupgrade image checksFelix Fietkau2016-11-201-24/+1
| | | | | | Replaced by image metadata Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: fix build errorsPavel Kubelun2016-11-193-0/+262
| | | | | | Add missing patches that broke LEDE builder while updating WDT driver Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: append metadata to imagesFelix Fietkau2016-11-192-6/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: refresh patchesHannu Nyman2016-11-1714-50/+25
| | | | | | | | | | This patch refreshes the ipq806x kernel patches. There was a large PR for ipq806x in the queue when the kernel patches were refreshed for 4.4.32, so currently there is quite much fuzz for ipq806x. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* ipq806x: fixes for R7800 and C2600Pavel Kubelun2016-11-164-18/+115
| | | | | | | | Updating spi pins configuration in R7800 and C2600 DTs Adding more usb power pin export and gsbi6 in R7800 DT Updating and fixing leds Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: fix Netgear R7500v2 memoryPavel Kubelun2016-11-161-1/+6
| | | | | | Netgear R7500v2 has 512MB of RAM with 2MB reserved block in the end of memory region. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: fix pci pinsPavel Kubelun2016-11-162-7/+9
| | | | | | Fix pci pins drive-strength according to oem sources. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: add vlans during switch init into R7800 DTPavel Kubelun2016-11-161-0/+4
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: add support for RPM message RAMPavel Kubelun2016-11-164-0/+150
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: add support for RPM clock controllerdissent12016-11-167-0/+1645
| | | | | | The patch #179 for RPM has initially been made for apq806x board. It has been modified to support ipq806x instead of apq8064. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: add CPU idle statesPavel Kubelun2016-11-165-0/+102
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: backport upstream wdt driverPavel Kubelun2016-11-1616-38/+2567
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: fix pcie reset gpiosPavel Kubelun2016-11-082-6/+6
| | | | | | Fix perst-gpios property in accordance to the driver, so it stops spamming that it can't parse it. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: fix zyxel image build errorFelix Fietkau2016-11-041-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: clean up the kernel config and reduce kernel image size by ↵Felix Fietkau2016-11-041-50/+7
| | | | | | disabling some unnecessary code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: fix a kconfig issueFelix Fietkau2016-11-041-0/+30
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: update DT in accordance to new drivers And add some more DT nodesPavel Kubelun2016-11-037-214/+90
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: switch to generic cpufreq driver cpufreq-dtPavel Kubelun2016-11-035-466/+383
| | | | | | | | This fixes ondemand frequency scaling and moves ipq806x onto upstream driver Also switching to ondemand frequency scaling as it is fixed now Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: add opp patches for voltage scalingPavel Kubelun2016-11-032-0/+259
| | | | | | Preparing for cpufreq driver switch to generic cpufreq-dt Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: update clk-qcom patchesPavel Kubelun2016-11-035-6/+563
| | | | | | Preparing for cpufreq driver switch to generic cpufreq-dt Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: fix leds, sata port for Netgear R7800 and minor fixes - renamed ↵Pavel Kubelun2016-11-032-34/+43
| | | | | | leds in correct color accordance - blink power led with white during boot and with amber when flashing firmware - fixed usb leds - enabled unused wps and rfkill leds as wlan leds. Now rfkill led is for 2.4GHz and wps - 5GHz WIFI - removed unneeded bootargs - removed unneeded pci pins from R7800 DT (driver already handles it in proper way) and add tx offsetting - nand ecc step size - fixed sata ports Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: TP-Link Archer C2600: convert old usbdev trigger to new usbportCezary Jackiewicz2016-11-031-2/+2
| | | | Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ipq806x: add reserved memory node in Netgear R7800Pavel Kubelun2016-10-311-0/+5
| | | | | | KERNEL BUG: BAD_PAGE_STATE in process appears here and there during intensive memory usage. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: ArcherC2600: export usb power pinsHenryk Heisig2016-10-311-0/+16
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ipq806x: ArcherC2600: devictree cleanupHenryk Heisig2016-10-311-13/+44
| | | | | | add blank lines and use macros for GPIOs Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ipq806x/nbg6817: add sysupgrade supportAndré Valentin2016-10-262-0/+99
| | | | | | Add new way of flashing to mmc devices based on rootfs split with loop devices. Signed-off-by: André Valentin <avalentin@marcant.net>
* ipq806x/nbg6817: add support for ZyXEL NBG6817André Valentin2016-10-268-8/+400
| | | | | | | | | | | | | | | | | CPU: 2x1.8GHz ARM, RAM: 512MiB Storage: 4MiB serial Flash, 3.9GiB MMC NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO For installation copy xx-mmcblk0p4-kernel.bin and xx-mmcblk0p5-rootfs-full.bin to device. Then run: cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4 cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5 reboot -f For debugging serial console is easily visible on board, no soldering needed. Signed-off-by: André Valentin <avalentin@marcant.net>
* switch to the new usbport LED triggerRafał Miłecki2016-10-191-1/+1
| | | | | | | This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: add back end-of-UBI marker for a few factory images (FS#228)Felix Fietkau2016-10-181-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: C2600: change leds colour nameHenryk Heisig2016-10-152-13/+12
| | | | Signed-off-by: Henryk Heisig hyniu@o2.pl
* ipq806x: add support for indicating the boot and upgrade state using four ledsHenryk Heisig2016-10-155-15/+54
| | | | Signed-off-by: Henryk Heisig hyniu@o2.pl
* ipq806x: fix wlan mac for Netgear R7800Pavel Kubelun2016-10-061-0/+3
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: update Netgear R7800 device treedissent12016-09-304-181/+308
| | | | | | | | | | | | | -add spi pins -move mdio and rgmii pinctrl from gmac and mdio into pinmux node -add i2c4 pinctrl into rpm node -add pin details into several nodes -update gmac1 and gmac2 parameters -update mdio phy0 and phy4 registers by ddwrt devs findings -fix i2c4 pin drive-strengh -remove pcie pins as it's already present in ipq8065 DT Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* image: add KERNEL_SIZE to the default device varsMathias Kresin2016-09-131-1/+0
| | | | | This reverts commit ec37a565878fd79d4127cbb843c17ce3b8dc97c0 and fixes the underlying issue.
* ramips: improve Linksys EA8500 build codeMathias Kresin2016-09-111-2/+2
| | | | | | Use of the kernel size variable. Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: use k as unit suffix for blocksizeMathias Kresin2016-09-041-8/+8
| | | | | | | Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: fix ipq8065 s2a/s2b regulator frequency (fixes ethernet performance)Roman Yeryomin2016-08-241-2/+2
| | | | Signed-off-by: Roman Yeryomin <roman@advem.lv>
* ipq806x: Archer C2600: Renaming LED accordance with the standardCezary Jackiewicz2016-08-243-20/+20
| | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
* ipq806x: enable ondemand governorJohn Crispin2016-08-241-1/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: rename R7800 device tree file, merge R7500v2 dts additionJo-Philipp Wich2016-08-244-13/+4
| | | | | | | The R7800 is an IPQ8065, so rename its dts file to reflect that fact. Also fold the R7500v2 dts addition into the existing 800-devicetree.patch. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: update kernel 4.4 to version 4.4.19Stijn Tintel2016-08-2311-200/+148
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon and x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ipq806x: Build image for Netgear Nighthawk X4 R7500v2Alexis Green2016-08-228-1/+383
| | | | | | Signed-off-by: Alexis Green <alexis@cessp.it> [Jo-Philipp Wich: add missing DEVICE_TITLE, fix model name in commit title] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipq806x: add usb pins to r7800 dts fileJohn Crispin2016-08-222-0/+183
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: sync with latest patches sent by QCAJohn Crispin2016-08-1811-93/+1350
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: fix MAC_POWER_SEL for Netgear R7800dissent12016-07-261-1/+1
| | | | | | | Fixes instability/corruption on the ethernet interface connected to port0 on the switch on Netgear R7800 as well. Signed-off-by: Josh Bendavid <joshbendavid@gmail.com> Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: fix boot hang if cmdline contains words with r in the middleJonas Gorski2016-08-011-1/+1
| | | | | | | | | | | | | | The ATB DTB mangle code will enter an infinite loop if it encounters a word in the command line that contains an r in the middle of the word. Fix this by increasing ptr everytime before invoking strchr, ot avoid finding the same r again. This fixes booting at least on Netgear R7500v1, which contains "ubi.mtd=rootfs" in its commandline, triggering the misbehaviour. Fixes: 0ddcbee26151 ("ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>