aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x
Commit message (Collapse)AuthorAgeFilesLines
* ipq806x/nbg6817: add sysupgrade supportAndré Valentin2016-10-262-0/+99
| | | | | | Add new way of flashing to mmc devices based on rootfs split with loop devices. Signed-off-by: André Valentin <avalentin@marcant.net>
* ipq806x/nbg6817: add support for ZyXEL NBG6817André Valentin2016-10-268-8/+400
| | | | | | | | | | | | | | | | | CPU: 2x1.8GHz ARM, RAM: 512MiB Storage: 4MiB serial Flash, 3.9GiB MMC NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO For installation copy xx-mmcblk0p4-kernel.bin and xx-mmcblk0p5-rootfs-full.bin to device. Then run: cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4 cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5 reboot -f For debugging serial console is easily visible on board, no soldering needed. Signed-off-by: André Valentin <avalentin@marcant.net>
* switch to the new usbport LED triggerRafał Miłecki2016-10-191-1/+1
| | | | | | | This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ipq806x: add back end-of-UBI marker for a few factory images (FS#228)Felix Fietkau2016-10-181-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: C2600: change leds colour nameHenryk Heisig2016-10-152-13/+12
| | | | Signed-off-by: Henryk Heisig hyniu@o2.pl
* ipq806x: add support for indicating the boot and upgrade state using four ledsHenryk Heisig2016-10-155-15/+54
| | | | Signed-off-by: Henryk Heisig hyniu@o2.pl
* ipq806x: fix wlan mac for Netgear R7800Pavel Kubelun2016-10-061-0/+3
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: update Netgear R7800 device treedissent12016-09-304-181/+308
| | | | | | | | | | | | | -add spi pins -move mdio and rgmii pinctrl from gmac and mdio into pinmux node -add i2c4 pinctrl into rpm node -add pin details into several nodes -update gmac1 and gmac2 parameters -update mdio phy0 and phy4 registers by ddwrt devs findings -fix i2c4 pin drive-strengh -remove pcie pins as it's already present in ipq8065 DT Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* image: add KERNEL_SIZE to the default device varsMathias Kresin2016-09-131-1/+0
| | | | | This reverts commit ec37a565878fd79d4127cbb843c17ce3b8dc97c0 and fixes the underlying issue.
* ramips: improve Linksys EA8500 build codeMathias Kresin2016-09-111-2/+2
| | | | | | Use of the kernel size variable. Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: use k as unit suffix for blocksizeMathias Kresin2016-09-041-8/+8
| | | | | | | Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq806x: fix ipq8065 s2a/s2b regulator frequency (fixes ethernet performance)Roman Yeryomin2016-08-241-2/+2
| | | | Signed-off-by: Roman Yeryomin <roman@advem.lv>
* ipq806x: Archer C2600: Renaming LED accordance with the standardCezary Jackiewicz2016-08-243-20/+20
| | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
* ipq806x: enable ondemand governorJohn Crispin2016-08-241-1/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: rename R7800 device tree file, merge R7500v2 dts additionJo-Philipp Wich2016-08-244-13/+4
| | | | | | | The R7800 is an IPQ8065, so rename its dts file to reflect that fact. Also fold the R7500v2 dts addition into the existing 800-devicetree.patch. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: update kernel 4.4 to version 4.4.19Stijn Tintel2016-08-2311-200/+148
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon and x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ipq806x: Build image for Netgear Nighthawk X4 R7500v2Alexis Green2016-08-228-1/+383
| | | | | | Signed-off-by: Alexis Green <alexis@cessp.it> [Jo-Philipp Wich: add missing DEVICE_TITLE, fix model name in commit title] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipq806x: add usb pins to r7800 dts fileJohn Crispin2016-08-222-0/+183
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: sync with latest patches sent by QCAJohn Crispin2016-08-1811-93/+1350
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: fix MAC_POWER_SEL for Netgear R7800dissent12016-07-261-1/+1
| | | | | | | Fixes instability/corruption on the ethernet interface connected to port0 on the switch on Netgear R7800 as well. Signed-off-by: Josh Bendavid <joshbendavid@gmail.com> Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: fix boot hang if cmdline contains words with r in the middleJonas Gorski2016-08-011-1/+1
| | | | | | | | | | | | | | The ATB DTB mangle code will enter an infinite loop if it encounters a word in the command line that contains an r in the middle of the word. Fix this by increasing ptr everytime before invoking strchr, ot avoid finding the same r again. This fixes booting at least on Netgear R7500v1, which contains "ubi.mtd=rootfs" in its commandline, triggering the misbehaviour. Fixes: 0ddcbee26151 ("ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ipq806x: add missing sysupgrade-nand => sysupgrade-tar changeFelix Fietkau2016-07-311-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-291-2/+2
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipq806x: clean up redundant initialization of core device image variablesFelix Fietkau2016-07-201-4/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: add patch for kernel compiler flagsJosh Bendavid2016-07-171-0/+13
| | | | Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
* ipq806x: change compiler flags to arm cortex-a15Josh Bendavid2016-07-171-1/+1
| | | | Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
* image.mk: clean up redundant code related to DEVICE_DTSFelix Fietkau2016-07-151-3/+1
| | | | | | | | It is used by a core build template, so the variable should be initialized and added to DEVICE_VARS in the core. Same for DEVICE_DTS_DIR Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image: clean up UBI related device variable definitionsFelix Fietkau2016-07-141-3/+3
| | | | | | | Move UBI related variable export to core, since the variables are used by a core Build/ template Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: remove obsolete UBINIZE_OPTS variablesFelix Fietkau2016-07-141-1/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq806x: enable ath10k firmware for 988x, 99x0 and 9984 by defaultFelix Fietkau2016-07-041-2/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update to version 4.4.14Hauke Mehrtens2016-06-2629-910/+421
| | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14 Some manual changes to target/linux/generic/patches-4.4/610- netfilter_match_bypass_default_checks.patch were needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq806x: enable ieee80211 phy hotplug and patch macaddressAdrian Panella2016-06-221-0/+23
| | | | | | | | Calibration data for QCA99x0 in this device has bogus macaddress. The data cannot be modified directly, as it breaks checksum control. Instead change the macaddress from phy add hotplug event. Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* ipq806x: Fix typo in Qualcomm device namesSven Eckelmann2016-06-221-3/+3
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* kernel: Move append-dtb to common image-commandsBen Whitten2016-06-221-4/+0
| | | | | | This build step is used by various targets, move it to a common section. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
* ipq806x: add initial support for Netgear R7800Pavel Kubelun2016-06-2210-12/+1597
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: move ath10k firmware selection into device profilesPavel Kubelun2016-06-222-1/+8
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: move smb208 nodes into a regulator subnodePavel Kubelun2016-06-221-0/+69
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: fix MAC_POWER_SEL switch configurationJosh Bendavid2016-06-205-6/+6
| | | | | | Fixes instability/corruption on the ethernet interface connected to port0 on the switch. Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
* ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dtsAdrian Panella2016-06-173-1/+190
| | | | | | | | | | | | | | The command-line arguments provided by the boot loader will be appended to a new device tree property: bootloader-args. If there is a property "append-rootblock" in DT under /chosen and a root= option in bootloaders command line it will be parsed and added to DT bootargs with the form: <append-rootblock>XX. Only command line ATAG will be processed, the rest of the ATAGs sent by bootloader will be ignored. This is usefull in dual boot systems, to get the current root partition without afecting the rest of the system. Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* ipq806x: add missing kernel config symbolJo-Philipp Wich2016-06-151-0/+1
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipq806x: restore old stmmac dma patch which is still needed to fix data ↵Josh Bendavid2016-06-141-0/+117
| | | | | | corruption Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
* Revert "ipq806x: add mangle bootargs options in config-4.4"Josh Bendavid2016-06-141-4/+1
| | | | | | | | This reverts commit 53147c2237231842b4d185f69c2bc0d79aff8b85. These config changes break booting on C2600 and probably other devices. Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
* ipq806x: move dts file to the files folderJohn Crispin2016-06-138-1173/+1528
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipg806x: set v4.4 as defaultJohn Crispin2016-06-1380-21248/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: add mangle bootargs options in config-4.4Adrian Panella2016-06-131-1/+4
| | | | | | Add config options to manage dual boot partitions, using MANGLE BOOTARGS Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* ipq806x: base-files: add support for Linksys EA8500Adrian Panella2016-06-138-0/+142
| | | | Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* ipq806x: build Linksys EA8500 imagesJohn Crispin2016-06-131-1/+18
| | | | Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* ipq806x: qcom rpm fix support for smb208Adrian Panella2016-06-132-0/+124
| | | | | | | | | In commit "regulator: qcom: Rework to single platform device" the smb208 regulator used in IPQ8064 was left out. Add it to that new framework and update Docs and DT accordingly. Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* uboot-envtools: add ipq806x supportJohn Crispin2016-06-131-1/+2
| | | | Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* treewide: replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-071-9/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 17:31:49 +0000