aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-5.4
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.4 to 5.4.66John Audia2020-09-192-8/+4
| | | | | | | | | | | | All modifications made by update_kernel.sh/no manual intervention needed Run-tested: ipq806x (R7800), ath79 (Archer C7v5), x86/64 No dmesg regressions, everything appears functional Signed-off-by: John Audia <graysky@archlinux.us> [add run test from PR] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: add Edgecore ECW5410 supportRobert Marko2020-09-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Edgecore ECW5410 indoor AP. Specification: - SoC: Qualcomm Atheros IPQ8068 ARMv7 2x Cortex A-15 - RAM: 256MB(225 usable) DDR3 - NOR Flash: 16MB SPI NOR - NAND Flash: 128MB S34MS01G2 Parallel NAND - Ethernet: 2 x 1G via 2x AR8033 PHY-s connected directly to GMAC2 and GMAC3 via SGMII (802.3af POE IN on eth0) - USB: 1 x USB 3.0 SuperSpeed - WLAN: 2x QCA9994 AC Wawe 2 (1x 2GHz bgn, 1x 5GHz acn) - CC2540 BLE - UART console on RJ45 next to ethernet ports exposed. Its Cisco pin compatible, 115200 8n1 baud. Installation instructions: Through stock firmware or initramfs. 1.Connect to console 2. Login with root account, if password is unknown then interrupt the boot with f and reset it in failsafe. 3. Transfer factory image 4. Flash the image with ubiformat /dev/mtd1 -y -f <your factory image path> This will replace the rootfs2 with OpenWrt, if you are currently running from rootfs2 then simply change /dev/mtd1 to /dev/mtd0 Note Initramfs: 1. Connect to console 2. Transfer the image from TFTP server with tftpboot, or by using DHCP advertised image with dhcp command. 3. bootm 4. Run ubiformat /dev/mtd1 You need to interrupt the bootloader after rebooting and run: run altbootcmd This will switch your active rootfs partition to one you wrote to and boot from it. So if rootfs1 is active, then it will change it to rootfs2. This will format the rootfs2 partition, if your active partition is 2 then simply change /dev/mtd1 with /dev/mtd0 If you dont format the partition you will be writing too, then sysupgrade will find existing UBI rootfs and kernel volumes and update those. This will result in wrong ordering and OpenWrt will panic on boot. 5. Transfer sysupgrade image 6. Flash with sysupgrade -n. Note that sysupgrade will write the image to rootfs partition that is not currently in use. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq806x: import bootargs-append from IPQ40xxRobert Marko2020-09-171-0/+14
| | | | | | | | | | | | | This imports the patch that adds bootargs-append support from IPQ40xx. This way we can append additional boot arguments from DTS instead of only being able to overwrite them. This way dual firmware devices can use the rootfs number that bootloader passes to decide from what to boot. But we still need to append console info and ubi root info. This is used by Edgecore ECW5410. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq806x: add GSBI1 node to DTSIRobert Marko2020-09-171-0/+46
| | | | | | | | IPQ806x series also has a GSBI1 with UART and I2C peripherals, so lets add the node for it. Its needed for Edgecore ECW5410 which uses the UART from GSBI1 as second UART for Bluetooth. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: bump 5.4 to 5.4.63John Audia2020-09-063-237/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Manually merged: hack-5.4 230-openwrt_lzma_options.patch bcm27xx 950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch x86 011-tune_lzma_options.patch Remove upstreamed patches in collaboration with Ansuel Smith: ipq806x 093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch 093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch 093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch All other modifications made by update_kernel.sh Build-tested: bcm27xx/bcm2708, ipq806x, x86/64 Run-tested: ipq806x (R7800), x86/64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [update commit message/tested] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.61John Audia2020-08-302-3/+3
| | | | | | | | | | | | | | | | | | | Manually merged: backport-5.4 011-kbuild-export-SUBARCH.patch layerscape 701-net-0262-net-dsa-ocelot-add-tagger-for-Ocelot-Felix-switches.patch All other modifications made by update_kernel.sh Build-tested: x86/64, lantiq/xrx200, ramips/mt7621 Run-tested: ipq806x (R7800), lantiq/xrx200, x86/64, ramips (RT-AC57U) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [minor commit message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.60Adrian Schmutzler2020-08-246-206/+86
| | | | | | | | | | | | | | | | | | | | Deleted upstream patches: generic: 041-genirq-affinity-Make-affinity-setting-if-activated-o.patch ipq806x: 093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch 093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch Merged manually: ipq806x: 093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch layerscape: 804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch Build-tested: ath79/generic, ipq806x, layerscape/armv7, layerscape/armv8_64b Run-tested: ipq806x (R7800) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: replace pci patchset with upstream versionAnsuel Smith2020-08-2416-562/+610
| | | | | | | | | | | | | | | | | | | | | Changes: - Update patches - Update dts with new binding Tx term offset dropped and replaced with a new compatible Removed: - 0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x Pci init does the same exact thing (was needed in older kernel version) - 0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B Rejected upstream, can't find any reason to have this. No regression with testing it on R7800. Tested on R7800 (ipq8065), R7500 v2 ("ipq8064-v2") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800] [rebase and refresh] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.59Adrian Schmutzler2020-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | Removed since added upstream: bcm27xx: 950-0428-staging-vchiq_arm-Add-a-matching-unregister-call.patch lantiq: 0800-spi-lantiq-ssc-Fix-warning-by-using-WQ_MEM_RECLAI.patch Manually adjusted patches: layerscape: 801-audio-0005-Revert-ASoC-fsl_sai-Add-support-for-SAI-new-version.patch Build-tested: ath79/generic, ramips, lantiq/xrx200, lantiq/xway, mvebu/cortexa9, sunxi/a53 Run-tested: ipq806x (R7800), layerscape (LS1012A-FRDM, LS1046A-RDB) Building on layerscape is only possible with workaround from PR #3179. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-By: John Audia <graysky@archlinux.us> [ipq806x] Tested-by: Pawel Dembicki <paweldembicki@gmail.com> [layerscape]
* ipq806x: replace nvmem qcom patch with upstream versionAnsuel Smith2020-08-133-86/+123
| | | | | | | | | | - Replace nvmem qcom patch with upstream version - Update compatible Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [refresh patches, minor commit message rewording] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
* ipq806x: replace phy dwc3 patch with upstream versionAnsuel Smith2020-08-135-651/+660
| | | | | | | | | | | | - Replace dwc3 phy patch with upstream version - Rework the dts to use the upstream bindings - Update changed config flags - Rename module to reflect config name Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [fix qcom,tx-deamp_3_5db typo, refresh patches, rename kmod] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
* ipq806x: replace patches with upstream versionAnsuel Smith2020-08-088-166/+218
| | | | | | | | Replace all the custom patches with the backported upstream version Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [refresh patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: use qcom-ipq8064-v1.0.dtsi from upstreamAdrian Schmutzler2020-08-052-0/+115
| | | | | | | | | | | | | | | | | This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches instead of keeping a local version. As a consequence: - we use a part of the shared definitions there and update device DTS files accordingly - we move additional stuff from our local v1.0.dtsi to the patch - we drop partitions, LEDs and keys from the file as we will implement them differently anyway Like with the previous patch, this follows the idea that a diff from upstream might be easier to handle than a big file of our own with different distribution pattern of properties. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: use qcom-ipq8064.dtsi from upstreamAdrian Schmutzler2020-08-054-1/+1152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Though a qcom-ipq8064.dtsi file exists upstream, we still do overwrite it with a full version of our own in the ipq806x target. About half of the contents of our file are upstream content, the other half are local improvements. To prevent us from having a lot of code maintained twice in parallel, this adjusts the target to use the upstream qcom-ipq8064.dtsi. Our local changes are arranged into three patches, the first pulling a commit from upstream, the second doing a few small adjustments, and the third adding all additional stuff. This should get us the best of both worlds. The property "ports-implemented" on sata@29000000 is moved to 2nd-level DTSI files as kernel defines it there as well. While at, rename 080-ARM-dts-qcom-add-gpio-ranges-property.patch to include the kernel version where it's added upstream. Even though this might look more complicated in the first place, the aim is to bring our files closer to upstream, so we can benefit from changes directly and vice-versa. After all, this drop about 650 lines just copied from the upstream DTSI file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: add support for Linksys EA7500 V1Pawel Dembicki2020-07-082-22/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Linksys EA7500 V1 router. Specification: - CPU: Qualcomm IPQ8064 - RAM: 256MB - Flash: NAND 128MB - WiFi: QCA9982 an+ac + QCA9983 bgn - Ethernet: 5 GBE Ports (WAN+ 4xLAN) (QCA8337) - USB: 1x USB 3.0 1x USB2.0 - Serial console: RJ-45 115200 8n1 (1V8 Voltage level) - 2 Buttons - 1 LED Known issues: - Some devices won't flash via web gui Installation: - Newer stock images doesn't allow to install custom firmware. - Please downgrade software to 1.1.2 version. Official firmware: https://downloads.linksys.com/downloads/firmware/FW_EA7500_1.1.2.172843_prod.gpg.img - Do it two times to downgrade all stored images. - Apply factory image via web-gui. Serial + TFTP method: - downgrade to 1.1.2 two times - connect ehternet and serial cable - set ip address of tftp server to 192.168.1.254 - put openwrt factory image to tftp folder and rename it to macan.bin - stop device while booting in u-boot - run command: "run flashimg" - run command: "setenv boot_part 1" - run command "saveenv" - reset Back to stock: - Please use old non-gpg image like this 1.1.2: https://downloads.linksys.com/downloads/firmware/FW_EA7500_1.1.2.172843_prod.img - ssh to router and copy image to tmp - use sysupgrade -n -F Tested by github users: @jack338c and @grzesiczek1 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [removed i2c4_pins, mdio0_pins, nand_pins, rgmii2_pins from DTSI] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: Update kernel 5.4 to version 5.4.50Hauke Mehrtens2020-07-041-1/+1
| | | | | | | Run tested: ath79, ipq40xx Build tested: ath79, ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: properly insert local mtd partition parsersAdrian Schmutzler2020-05-251-16/+16
| | | | | | | | | | | | | | | | Between 4.19 and 5.4, the kernel moved the partition parsers into the parsers subdirectory. This led to some necessary rebasing of our local patches for parsers, which partially has been performed without caring about where the code was inserted. This commit tries to adjust our local patches so that parsers are inserted at the "proper" positions with respect to alphabetic sorting (if possible). Thus, the commit is cosmetic. While this might look useless now, it will make life easier when adding other parsers in the future or for rebasing on kernel changes. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.28Petr Štetiar2020-03-281-79/+0
| | | | | | | | | | | | | | | | | | | | Changelog since 5.4.24 mentions CVE-2019-19769, CVE-2020-8648, CVE-2020-8649 and CVE-2020-8647. Removed upstreamed: generic: 507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch generic: 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch bcm27xx: 950-0435-ASoC-pcm512x-Fix-unbalanced-regulator-enable-call-in.patch ipq806x: 701-stmmac-fix-notifier-registration.patch lantiq: 002-pinctrl-falcon-fix-syntax-error.patch octeontx: 0002-net-thunderx-workaround-BGX-TX-Underflow-issue.patch Run tested: apu2, qemu-x86-64, apalis, a64-olinuxino, nbg6617 Build tested: sunxi/a53, imx6, x86/64, ipq40xx Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: bump 5.4 to 5.4.24Koen Vandeputte2020-03-092-20/+10
| | | | | | | | | Refreshed all patches. Compile-tested on: imx6 Runtime-tested on: imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ipq806x: fix broken stmmac notifierAnsuel Smith2020-03-031-0/+84
| | | | | | | Backport a patch in 5.6 to fix stmmac notifier registration Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: add patch to fix broken usb3Ansuel Smith2020-03-031-0/+29
| | | | | | | | | Due to changes in syscon driver, the phy dwc3 driver needs to use device_node_to_regmap since it has to skip the new introduced clk check. This fix broken usb3 on this target. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: add patch to disable pretimeout on timer platformAnsuel Smith2020-03-031-0/+98
| | | | | | | | | Currently the watchdog timer is broken as it tries to get an interrupt to setup pretimeout. Since our platform have a different type of interrupt disable it and use legacy watchdog probe. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: add ipq806x mdio driverAnsuel Smith2020-03-031-0/+206
| | | | | | | | | This was created by Chunkeey some time ago. Since mdio driver works or doesn't work and since this was tested by me for 1 year, include it to remove the use of the generic bitbang gpio driver for switch driver. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: fix tsens driverAnsuel Smith2020-03-035-178/+231
| | | | | | | | | | Rework tsens driver. Since in the new kernel 5.4 init common do more than it should, inizialize the kernel memory directly in the driver and drop use of this function. Rework all the patch with the new variable names. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: rework L2 cache patchAnsuel Smith2020-03-031-16/+54
| | | | | | | | Rework l2 scaling patch to fix some compile warning and to imporve the caling timings by removing call to unnecessary function. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: update nvmem cpufreq driverAnsuel Smith2020-03-031-31/+36
| | | | | | | Rework the nvmem cpufreq driver to reflect changed in kernel 5.4 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: drop upstream patchAnsuel Smith2020-03-0316-2941/+0
| | | | | | This patchset has been merged upstream. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: refresh patches for kernel 5.4Ansuel Smith2020-03-0328-112/+118
| | | | | | Refresh patches and minor changes for new kernel support Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq806x: copy files to kernel 5.4Ansuel Smith2020-03-0356-0/+8749
Copy files to kernel 5.4 to start porting. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 10:27:05 +0000