aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-3.18/115-add-pcie-aux-clk-dts.patch
Commit message (Collapse)AuthorAgeFilesLines
* ipg806x: set v4.4 as defaultJohn Crispin2016-06-131-80/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: fix 3.18 supportJohn Crispin2016-05-271-0/+80
| | | | | | accidentially removed the files in the v4.4 commit Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: Add support for linux-4.4Ram Chandra Jangir2016-05-271-80/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
* ipq806x: fix pcie reset gpio definions and move them to the common .dtsi fileFelix Fietkau2015-11-211-9/+9
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47544
* ipq806x: add hwspinlock supportJohn Crispin2015-08-171-3/+3
| | | | | | | | | | | | | | This change cherry-picks the following 3 changes from linux-next: *fb7737 hwspinlock/core: add device tree support *19a0f6 hwspinlock: qcom: Add support for Qualcomm HW Mutex block *bd5717 hwspinlock: qcom: Correct msb in regmap_field We're also adding a patch to add the hardware spinlock device nodes on IPQ806x platforms (033-soc-qcom-Add-sfbp-device-to-IPQ806x-dts.patch). Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 46655
* ipq806x: fix freeze in PCIe code when booting with an old u-bootFelix Fietkau2015-08-041-0/+80
Old bootloader (same ones which have DT disabled) don't perform any PCIe initialization. The consequence is a freeze during PCIe bring-up on these old u-boot. Same kernel with a newer bootloaders works fine as they contain the corresponding PCIe init code. In this change, we'll add the missing init and make sure the kernel doesn't rely on some preexisting init to get PCIe to work. That includes the following changes: *GPIOs: set function & drive strength *Clocks: add init code for aux & ref clocks *PCIe driver: additional init of the hardware controller Tested 3.18 and 4.1 on an AP148 with bootloader branch 0.0.1 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 46557