aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/config-3.18
Commit message (Collapse)AuthorAgeFilesLines
* ipg806x: set v4.4 as defaultJohn Crispin2016-06-131-452/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: enable PM supportJohn Crispin2016-05-311-0/+2
| | | | | | this fixes build errors with latest mac80211 Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: fix 3.18 supportJohn Crispin2016-05-271-0/+450
| | | | | | accidentially removed the files in the v4.4 commit Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: Add support for linux-4.4Ram Chandra Jangir2016-05-271-450/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
* ipq806x: update stmmac to the version from linux 4.3Felix Fietkau2015-11-221-3/+9
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47593
* ipq806x: enable ide led triggerJonas Gorski2015-09-041-0/+1
| | | | | | | | | To use gpio leds as ide leds, we need to enable the trigger to be included in the kernel. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46795
* ipq806x: enable ubiblock supportJonas Gorski2015-09-041-1/+1
| | | | | | | | To allow squashfs on ubi, enable ubiblock support in the kernel. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46782
* ipq806x: switch AP148 to using SMEM based MTD parserJohn Crispin2015-08-171-0/+4
| | | | | | | | | | | | | | *Enable SMEM MTD parser and its dependencies (SMEM & HW spinlocks) in the kernel config *Replaces the MTD layout in DT by the dynamic layout provided by the SMEM parser for AP148 Using the OF based parser is still possible on platforms which have a fixed MTD partition layout. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 46658
* ipq806x: enable NAND flash support in the kernelFelix Fietkau2015-08-071-1/+20
| | | | | | | | | | | | | | | | | Previous patch set backported the recently posted NAND flash driver to 3.18 and 4.1 kernel. This patch now enables it in the kernel config. There is no change to the partition layout and init yet. But the NAND flash can be seen in the mtd list on an AP148: root@OpenWrt:/# cat /proc/mtd dev: size erasesize name mtd0: 10000000 00020000 "qcom-nandc" ... Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 46569
* ipq806x: Add ADM supportFelix Fietkau2015-08-071-0/+1
| | | | | | | | | | | | | | | | These are cherry-picked & backported from LKML: *https://lkml.org/lkml/2015/3/17/19 They are enabled on both 3.18 and 4.1 kernel. Patches 150 to 154 are applying changes merged since 3.18; they enable mechanisms used by the ADM driver. ADM engine is used by the NAND controller, so it is necessary to bring-up NAND flash support. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 46567
* ipq806x: refresh kernel configsFelix Fietkau2015-08-041-1/+0
| | | | | | | | Remove options which have been moved into the generic config ever since. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 46558
* kernel: move a symbol from the ipq806x config to generic to prevent it from ↵Felix Fietkau2015-06-071-1/+0
| | | | | | | | being nuked by make kernel_oldconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45920
* ipq806x: missing symbolJohn Crispin2015-06-031-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45880
* ipq806x: move stmmac support in the kernel binaryJohn Crispin2015-06-011-2/+8
| | | | | | | | | | Ethernet GMAC is built-in the SoC, so there is no need to enable it as a module. We'll just assume we need it. That's what is done for other platform where this driver is used so it'll make things more consistent. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45871
* ipq806x: enable kernel support for Fixed PHY emulationJohn Crispin2015-05-291-0/+1
| | | | | | | | | | Most ipq806x platforms use an ethernet switch, and the new upstream GMAC driver makes use of the Fixed PHY emulation to force the link settings despite the lack of PHY. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45830
* ipq806x: add missing symbolJohn Crispin2015-05-271-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45794
* ipq806x: enable cpu idle support in kernel confJohn Crispin2015-05-231-0/+3
| | | | | | Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45731
* ipq806x: add & enable cpufreq supportJohn Crispin2015-05-231-0/+24
| | | | | | | | | | | | | | | This change set enables frequency scaling on ipq806x, which speeds-up the CPU and allows it to achieve its max frequency. These patches are cherry-picked & backported from the following location: *130-132: linux-next *133-143: LKML - https://lkml.org/lkml/2015/3/21/15 *144: derived from other qcom similar dts *145: derived from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/drivers/cpufreq/cpufreq-krait.c Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45730
* ipq806x: add power regulators supportJohn Crispin2015-05-231-2/+4
| | | | | | | | | Patches are cherry-picked from linux-next. We're also adding the corresponding config option to the kernel. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45729
* ipq806x: add pcie support to ipq806x based platformsFelix Fietkau2015-05-101-0/+6
| | | | | | | | | | | | | | This change adds PCIe support to IPQ806x based platforms. The driver is actually cherry-picked from the following LKML thread: *https://lwn.net/Articles/643086/ (patches 110-111) We also add here an additional fix to support multiple PCI controllers on the same platform (patch 112), and to patch the ap148 & dbs149 DTS files (patch 113). Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45663
* ipq806x: add support for zImage kernelFelix Fietkau2015-05-101-1/+2
| | | | | | | | | | | | | | | This change enable zImage+appended dtb support in ipq806x kernel options. The zImage will now be generated as part of the kernel binaries. Platforms which do not have DT support enabled in U-boot can now make use of it by generating zImage files and appending dtb to it. It is not used yet but it is done as a stepping stone for early IPQ806x platforms, which did not include DT support in U-boot. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45662
* ipq806x: enable AT803x driverJohn Crispin2015-04-211-0/+1
| | | | | | | | | Certain IPQ806x based platforms are making use of this PHY. So we'll enable it so it gets detected as such. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45535
* ipq806x: another missing symbolJohn Crispin2015-04-051-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45277
* ipq806x: enable usb supportJohn Crispin2015-04-031-0/+1
| | | | | | | | | This change doesn't make USB functional but it does make it selectable from a configuration perspective. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45259
* ipq806x: another missing symbolJohn Crispin2015-04-031-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45257
* ipq806x: clean-up kernel config fileFelix Fietkau2015-04-031-1/+0
| | | | | | | | | Options that used to be in target config have been added to the generic config file, so remove them. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45255
* ipq806x: add missing symbolJohn Crispin2015-04-011-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45228
* ipq806x: clean up kernel confJohn Crispin2015-04-011-5/+0
| | | | | | Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45211
* ipq806x: fix AP148 boot from NORJohn Crispin2015-03-151-0/+3
| | | | | | | | | | | | | | | | This patch allows AP148 to boot from NOR flash. As we're using a FIT image as kernel (which includes kernel bin + DTB) we enable the MTD_SPLIT_FIT_FW kernel option, which will detect the FIT image and automatically split the "firmware" partition into 2 MTD parts (kernel + rootfs). The rootfs will then be parsed and split between rootfs + rootfs_data, as usual. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44794
* ipq806x: add 2 missing symbols that broke a full buildJohn Crispin2015-03-101-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44639
* kernel: move KERNFS to generic configJohn Crispin2015-03-061-1/+0
| | | | | | | | KERNFS symbol is selected by SYSFS, so place it in generic config. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44615
* kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLEDJohn Crispin2015-03-061-1/+0
| | | | | | | | | Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since only one platfrom (omap) needs them. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44614
* kernel: move MTD_SPLIT_SUPPORT to generic configJohn Crispin2015-03-061-1/+0
| | | | | | | | | | | CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform specific configs explicitly enables it, while no one platform disables this symbol. So place it in generic config and remove from platform specific configs. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44612
* ipq806x: enable ar8xxx switch family supportJohn Crispin2015-02-241-0/+3
| | | | | | Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44519
* ipq806x: enable watchdog kernel optionJohn Crispin2015-02-221-1/+2
| | | | | | | | | | Some bootloaders seem to trigger the watchdog during the boot process, therefore the lack of watchdog driver trigger a reboot a few seconds after boot. So we'll enable it here to avoid it. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44503
* ipq806x: update target to v3.18John Crispin2015-02-111-0/+371
Patches in the ipq806x/patches folder were out of tree in v3.14. The newest patch at the time was from June, so we can safely assume that either the patches have been merged, or they have been rejected for a good reason. If patches are seen missing, we'll cherry-pick them on a per-needed basis. This new kernel have been tested on AP148, which seems to works fine. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44386