aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx
Commit message (Collapse)AuthorAgeFilesLines
* kernel: Refresh patches for all targetsHauke Mehrtens2022-07-031-1/+1
| | | | | | | | | | | | | | | | This refreshes the patches on top of kernel 5.4.127. Deleted (upstreamed): bcm27xx/patches-5.10/950-0005-Revert-mailbox-avoid-timer-start-from-callback.patch [0] bcm27xx/patches-5.10/950-0678-bcm2711_thermal-Don-t-clamp-temperature-at-zero.patch [1] Needed manual modifications: bcm27xx/patches-5.10/950-0410-drm-atomic-Pass-the-full-state-to-CRTC-atomic-begin-.patch [0]: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.127&id=bb2220e0672b7433a9a42618599cd261b2629240 [1]: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.127&id=83603802954068ccd1b8a3f2ccbbaf5e0862acb0 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: cut ath10k board file for mikrotik subtargetJohn Thomson2022-07-013-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid shipping ath10k board file in Mikrotik initram images Most will only ever need to use these initram images once—to initially load OpenWrt, but fix these images for more consistent Wi-Fi performance between the initram and installed squashfs images. OpenWrt BUILDBOT config ignores -cut packages in the initram images build. This results in BUILDBOT initram images including the linux-firmware qca4019 board-2.bin, and (initram image booted) Mikrotik devices loading a generic BDF, rather than the intended BDF data loaded from NOR as an api 1 board_file. buildbot snapshot booted as initram image: cat /etc/openwrt_version r19679-810eac8c7f dmesg | grep ath10k | grep -E board\|BDF [ 9.794556] ath10k_ahb a000000.wifi: Loading BDF type 0 [ 9.807192] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 11892f9b [ 12.457105] ath10k_ahb a800000.wifi: Loading BDF type 0 [ 12.464945] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 11892f9b CC: Robert Marko <robimarko@gmail.com> Fixes: 5eee67a72fed ("ipq40xx: mikrotik: dont include ath10k-board-qca4019 by default") Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Reviewed-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit 602b5f6c60a2827bd918dfae0ffb271f8b88f4df) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ipq40xx: mikrotik: dont include ath10k-board-qca4019 by defaultRobert Marko2022-07-011-0/+1
| | | | | | | | | | | | | Since MikroTik subtarget now uses dynamic BDF loading its crucial that it doesnt include the board-2.bin at all which is provided by the ath10k-board-qca4019 package. So to resolve this dont include the ath10k-board-qca4019 package on the MikroTik subtarget. Signed-off-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit 5eee67a72fed52ac686dd467d93eea95d44c8dff) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ipq-wifi: remove packaged BDF-s for MikroTik devicesRobert Marko2022-07-011-6/+4
| | | | | | | | | | | | | Since we now provide the BDF-s for MikroTik IPQ40xx devices on the fly, there is noneed to include package and ship them like we do now. This also resolves the performance issues that happen as MikroTik changes the boards and ships them under the same revision but they actually ship with and require a different BDF. Signed-off-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit ab141a6e2cb645ff64adb107af2e8973a720c1c7) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ipq40xx: mikrotik: provide BDF-s on demandRobert Marko2022-07-011-0/+23
| | | | | | | | | | | | | Since we now can pass the API 1 BDF-s aka board.bin to the ath10k driver per radio lets use that to provide the BDF-s for MikroTik devices. This also resolves the performance issues that happen as MikroTik changes the boards and ships them under the same revision but they actually ship with and require a different BDF. Signed-off-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit 4d4462cc2ace4b044e99e9b22a24cb4d89c7db95) Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
* ipq40xx: mikrotik: make RouterBoot partition writeableThibaut VARÈNE2022-06-305-5/+0
| | | | | | | | | | Linux MTD requires the parent partition be writable for a child partition to be allowed write permission. In order for soft_config to be writeable (and modifiable via sysfs), the parent RouterBoot partition must be writeable Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit bb929a0f9cbabef59eaced57d5162d112640c3cd)
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-271-0/+2
| | | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 539e60539a2fde6531bd179c94bb9c7f8f490f2b)
* kernel: move Toshiba-TC58NVG0S3H patch to ipq40xxChristian Lamparter2022-06-091-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hannu Nyman wrote in openwrt's github issue #9962: |Based on forum discussion, the commit 0bc794a |"kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash" |causes flash memory chip misdetection for some other |Fritzbox devices, as the commit only defines a 4-byte flash |memory chip ID that matches several chips used in the devices. | |See discussion from this onward |<https://forum.openwrt.org/t/openwrt-22-03-0-rc1-first-release-candidate/126045/182> | |OpenWrt 22.03.0-rc2 and rc3 are causing on a Fritzbox 7412 |bootloops due to a misdetected flash chip. | |Yup, that patch is missing the 5th ID byte entirely - both chips |share the same first 4; | | TC58NVG0S3HTA00 = 0x98 0xf1 0x80 0x15 0x72 (digikey datasheet, page 35) | TC58BVG0S3HTA00 = 0x98 0xf1 0x80 0x15 0xf2 (digikey datasheet, page 28) | |The commit has also been backported to openwrt-22.03 after rc1, |so both rc2 and rc3 suffer from this bug." Andreas' TC58NVG0S3H seems not to follow Toshibas/Kioxa's own datasheet. It only reports the first four bytes: "98 f1 80 15 00 00 00 00". This patch changes the id_len in the entry to 8. This makes it so that Andreas' NAND is still detected. At the same time, this prevents other Toshiba NAND flash chips - that share the same four bytes - from being misdetected. Upstream (Miquel Raynal) decided to drop this patch for now. But he advised to keep it in OpenWrt. As other devices could be affected. <https://lore.kernel.org/linux-mtd/20220606155919.23001410@xps-13/> Reported-by: Peter-vdL Tested-by: Peter-vdL Tested-by: Andreas B<C3><B6>hler <dev@aboehler.at> Fixes: 0bc794a66845 ("kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash") Link: <https://github.com/openwrt/openwrt/issues/9962> (actually move the patch, added comment about possible counterfeits) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.120John Audia2022-06-071-1/+1
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800, x86/64 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit f800f8d6fc4f21ed87454aa657ebbf376dc3b6cf)
* ipq40xx: add Aruba AP-365 specific BDFDavid Bauer2022-06-022-1/+10
| | | | | | | | | | | | | | Aruba deploys a BDF in the root filesystem, however this matches the one used for the DK04 reference board. The board-specific BDFs are built into the kernel. The AP-365 shows sinificant degraded performance with increased range when used with the reference BDF. Replace the BDF with the one extracted from Arubas kernel. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit b21b98627dcd6c1868d13964f6d84e8d43ae9ef7)
* kernel: bump 5.10 to 5.10.116Hauke Mehrtens2022-05-181-1/+1
| | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/900-regulator-consumer-Add-missing-stubs-to-regulator-co.patch All other patches automatically rebased. Compile-tested: lantiq/xrx200, armvirt/64 Run-tested: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.115John Audia2022-05-171-1/+1
| | | | | | | | | | | | | | Removed upstreamed: backport-5.10/850-v5.17-0004-PCI-aardvark-Clear-all-MSIs-at-setup.patch pending-5.10/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit b754b0c721131005efa7127151088e9c23dc9053)
* IPQ4019: AVM FRITZ!Box 7530: Remove NAND ECC restrictions from DTSAndreas Böhler2022-05-151-0/+3
| | | | | | | | | | Some revisions of the FRITZ!7530 use a Toshiba NAND with 8 bit ECC in contrast to the Macronix NAND with 4 bit ECC. This removes the hardcoded ECC strength and step size as set in qcom-ipq4019.dtsi, thus relying on the kernel NAND detection routines to correclty set up the ECC parameters. Signed-off-by: Andreas Böhler <dev@aboehler.at> (cherry picked from commit f167f4a9a42e6d1e186487883500299cc82b1b9f)
* ipq40xx: revert Cell-C RTL30VW to legacy caldata extractionPawel Dembicki2022-05-152-15/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This partially reverts commit cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data"). After switching to nvmem RTL30VW, wifi was broken: [ 19.118319] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000 [ 19.118377] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 19.130285] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b [ 19.159092] ath10k_ahb a000000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=cellc,rtl30vw from ath10k/QCA4019/hw1.0/board-2.bin [ 19.238764] ath10k_ahb a000000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0 [ 19.238847] ath10k_ahb a000000.wifi: failed to fetch board file: -12 [ 19.247362] ath10k_ahb a000000.wifi: could not probe fw (-12) [ 20.190797] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000 [ 20.190853] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 20.202893] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b [ 20.231357] ath10k_ahb a800000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=cellc,rtl30vw from ath10k/QCA4019/hw1.0/board-2.bin [ 20.317318] ath10k_ahb a800000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0 [ 20.317399] ath10k_ahb a800000.wifi: failed to fetch board file: -12 [ 20.326098] ath10k_ahb a800000.wifi: could not probe fw (-12) Bootloader mangles in NAND partitions and removes precal@X nodes in working system: root@OpenWrt:~# echo $(cat /sys/firmware/devicetree/base/soc/spi@78b5000/flash@0/partitions/partition@170000/label) 0:ART root@OpenWrt:~# ls /sys/firmware/devicetree/base/soc/spi@78b5000/flash@0/partitions/partition@170000/ label name reg Revert to legacy method fixed the problem. Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (cherry picked from commit af425e42212d476dd95ec31f18d85b19004c9268)
* ipq40xx: Lyra: update RGB LED-Controller node for 5.10+Christian Lamparter2022-05-152-47/+78
| | | | | | | | | | | | | | | | | | | | | | | Add the reg and color property to each channel node. This update is to accommodate the multicolor framework. Refer to: <https://lore.kernel.org/all/20200622185919.2131-9-dmurphy@ti.com> <https://lore.kernel.org/all/20210818070209.1540451-1-michal.vokac@ysoft.com> Note: There is only a single extremely bright RGB-LED. The RGB-color channels (i.e.: blue-0, blue-1 and blue-2) are running in parallel to increase the current delivery beyond what a single PWM-output on the LED controller could do. BugLink: https://github.com/openwrt/openwrt/issues/9851 Reported-By: Thomas Bøge <thomas@boegenielsen.dk> Tested-By: Thomas Bøge <thomas@boegenielsen.dk> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 834c9b3f055e5ea719f6adfb3fa979e32f2adbd0)
* ipq40xx: 5.10: fix ar40xx driverNick Hainke2022-04-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | This commit is completely based on the work of adron-s: https://github.com/openwrt/openwrt/pull/4721#issuecomment-1101108651 The commit fixes the data corruption on TX packets. Packets are transmitted, but their contents are replaced with zeros. This error is caused by the lack of guard (50 ms) intervals between calibration phases. This error is treated by adding mdelay(50) to the calibration function code. In the original qca-ssda code [0], these mdelays were existing, but in the ar41xx.c they are gone. Tested on: - Fritz!Box 4040 - Fritz!Box 7530 - Mikrotik SXTsq 5AC - ZyXEL NBG6617 - [0] https://git.codelinaro.org/clo/qsdk/oss/lklm/qca-ssdk/-/blob/NHSS.QSDK.11.4/src/init/ssdk_init.c#L2072 Suggested-by: Serhii Serhieiev <adron@mstnt.com> Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit ab7e53e5cce703c7a62efbe1d41fb94c2228a178)
* kernel: bump 5.10 to 5.10.110John Audia2022-04-104-31/+5
| | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Compile-/run-tested: ath79/generic (Archer C7 v2). Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebased in 22.03 tree] Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit b92ec82235b996ece32bc84af177adf1a4dcb90e)
* ipq40xx: add RT-AC2200 alternative name to RT-AC42U/RT-ACRH17Ray Wang2022-04-101-0/+2
| | | | | | | RT-AC2200 is the same device with a different name. The OEM firmwares have the same MD5. Signed-off-by: Ray Wang <raywang777@foxmail.com> (cherry picked from commit 3204906569768cabcbedb5eaa3a11e2fcb18cd48)
* ipq40xx: add support for FRITZ!Box 7520Andre Heider2022-04-051-0/+2
| | | | | | | | | | | | | | This model, also know as "1&1 HomeServer", shares the same features as 7530. The vendor firmware has artificial software limitations: only 2 of the 4 LAN-Ports are GBit, and the USB-Host is only v2.0. With OpenWrt, USB is already working at v3.0. Signed-off-by: Andre Heider <a.heider@gmail.com> (updated commit message to reflect current state) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit cb6f4be13703f0224fc462caaeac14e725c72986)
* ipq40xx: WAC510: device-tree overhaulingChristian Lamparter2022-03-272-40/+33
| | | | | | | | | | removes usb-port remains as neither the WAC510 nor the WAC505 come with a USB port. Update the LED properties to phase out labels and introduce generic node-names as well as adding the color, function and function-enumerator properties. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 026fda10a5c45d56fd856628b6e9e69b95fd5e58)
* ipq40xx: update E2600AC c1/c2 board张 鹏2022-03-264-16/+28
| | | | | | | | | | Modified the radio frequency hardware part of e2600ac c1/c2, need to cooperate with the modified board.bin file, the device can work normally. Signed-off-by: 张 鹏 <sd20@qxwlan.com> (cherry picked from commit bdc786e82c13547b01bd8f699d00598a974c14f6) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: disable non-building tel(co Electronics) x1proChristian Lamparter2022-03-261-0/+1
| | | | | | | | | | | Tel(co Electronics) X1 Pro is preventing ipq40xx generic from building due to the KERNEL_SIZE. Whenever bigger kernels are possible, if lzma is supported is unknown. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 4ce52de450922dc671f08fb4551c066cfcf55bf4)
* ipq40xx: add support for Telco X1 ProNicholas Smith2022-03-195-2/+347
| | | | | | | | | | | | | | | | | | | | | | | | | | | Telco X1 Pro is a Cat12 LTE-A Pro modem router. Vendor firmware is based on a recent version of OpenWrt. Flashing is possible via CLI using sysupgrade -F -n The serial headers allow bootloader and console access Serial setting: 115200 8N1 Brief Specifications: IPQ4019 SoC 32MB flash 512MB RAM 4x gigabit LAN 1x gigabit WAN Dual-band Wave-2 wifi 2x SMA LTE antenna connectors 2x RP-SMA wifi antennas 1x USB 2.0 port 1x Reset button Serial headers installed 1x Nano SIM tray 1x Quectel EM-12G LTE-A Pro modem 1x M.2 slot attached to USB 3.0 1x internal micro SD card slot Signed-off-by: Nicholas Smith <nicholas@nbembedded.com>
* kernel: 5.10: allocate last level PTEs in high memoryRui Salvaterra2022-03-011-1/+1
| | | | | | | | | | Enable support for allocating user space page table entries in high memory [1], for the targets which support this feature. This saves precious low memory (permanently mapped, the only type of memory directly accessible by the kernel). [1] https://www.kernel.org/doc/html/latest/vm/highmem.html Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-011-1/+1
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* ipq40xx: mikrotik: fix LED scriptRobert Marko2022-02-201-0/+1
| | | | | | | | Fix the missing ;; after the cAP ac case in /e/b/01_leds. Fixes: 93d9119 ("ipq40xx: add MikroTik cAP ac support") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (minor touch-up)
* ipq40xx: document pcie wifi chip on the GL.Inet GL-B2200Christian Lamparter2022-02-191-4/+4
| | | | | | | | | | | | | | | | | | Enrico provided a bootlog that shows the chip is a WAVE-2 QCA9888v2: > pci 0000:01:00.0: [168c:0056] type 00 class 0x028000 > [...] > ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x56. > ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 [...] chip_id 0x00000000 sub 0000:0000 > ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9888-fW-13-5ae337bb1 api 5 features mfp,[...] > ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 6535d835 > ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 32 raw 0 hwcrypto 1 this patch switches the device over to pre-calibration. (this is more or less cosmetic) Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: limit available radio channels for GL.iNet GL-B2200Enrico Mioso2022-02-191-0/+2
| | | | | | | | | The PCIe and built-in 5GHZ radios are meant to operate on different frequency bands. The hardware enforces this via RF filters. Add this information to allow software enforcing it as well. Credits to Piotr Dymacz for the invaluable help. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
* kernel: bump 5.10 to 5.10.100John Audia2022-02-111-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* ipq40xx: add Linksys MR8300 WAN portJulien Cassette2022-02-051-2/+6
| | | | | | | | | | This makes the WAN interface and port appear in LuCi -> Network -> Switch on Linksys MR8300. This allows to configure a VLAN on WAN. Fixes: FS#4227 Signed-off-by: Julien Cassette <julien.cassette@gmail.com>
* ipq40xx: add support for ZTE MF286DPawel Dembicki2022-02-057-2/+484
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ZTE MF286D is a LTE router with four gigabit ethernet ports and integrated QMI mPCIE modem. Hardware specification: - CPU: IPQ4019 - RAM: 256MB - Flash: NAND 128MB + NOR 2MB - WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2x2:2 - WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11anac 2x2:2 - LTE: mPCIe cat 12 card (Modem chipset MDM9250) - LAN: 4 Gigabit Ports - USB: 1x USB2.0 (regular port). 1x USB3.0 (mpcie - used by the modem) - Serial console: X8 connector 115200 8n1 Known issues: - Many LEDs are driven by the modem. Only internal LEDs and wifi LEDs are driven by cpu. - Wifi LED is triggered by phy0tpt only - No VoIP support - LAN1/WAN port is configured as WAN - ZTE gives only one MAC per device. Use +1/+2/+3 increment for WAN and WLAN0/1 Opening the case: 1. Take of battery lid (no battery support for this model, battery cage is dummy). 2. Unscrew screw placed behind battery lid. 3. Take off back cover. It attached with multiple plastic clamps. 4. Unscrew four more screws hidden behind back case. 5. Remove front panel from blue chassis. There are more plastic clamps. 6. Unscrew two boards, which secures the PCB in the chassis. 7. Extract board from blue chassis. Console connection (X8 connector): 1. Parameters: 115200 8N1 2. Pin description: (from closest pin to X8 descriptor to farthest) - VCC (3.3V) - TX - RX - GND Install Instructions: Serial + initramfs: 1. Place OpenWrt initramfs image for the device on a TFTP in the server's root. This example uses Server IP: 192.168.1.3 2. Connect serial console (115200,8n1) to X8 connector. 3. Connect TFTP server to RJ-45 port. 4. Stop in u-Boot and run u-Boot commands: setenv serverip 192.168.1.3 setenv ipaddr 192.168.1.72 set fdt_high 0x85000000 tftp openwrt-ipq40xx-generic-zte_mf286d-initramfs-fit-zImage.itb bootm $loadaddr 5. Please make backup of original partitions, if you think about revert to stock. 6. Login via ssh or serial and remove stock partitions: ubiattach -m 9 ubirmvol /dev/ubi0 -N ubi_rootfs ubirmvol /dev/ubi0 -N ubi_rootfs_data 7. Install image via "sysupgrade -n". Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (cosmetic changes to the commit message) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-011-1/+1
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: add MikroTik cAP ac supportAlar Aun2022-02-018-1/+279
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MikroTik RouterBOARD RBcAPGi-5acD2nD (cAP ac), a indoor dual band, dual-radio 802.11ac wireless AP, two 10/100/1000 Mbps Ethernet ports. See https://mikrotik.com/product/cap_ac for more info. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 128 MB - Storage: 16 MB NOR - Wireless: · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 port, PoE in and passive PoE out Unsupported: - PoE out Installation: Boot the initramfs image via TFTP and then flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Alar Aun <alar.aun@gmail.com>
* kernel: move bootargs-append patch to genericSungbo Eo2022-01-291-12/+0
| | | | | | | | | | This moves bootargs-append support patch from ipq40xx and ipq806x to generic. This way we can append additional boot arguments from DTS instead of only being able to overwrite them. This is a preparation for kirkwood support of ipTIME NAS1. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ipq40xx: drop 5.4 kernelRobert Marko2022-01-2448-7415/+0
| | | | | | | Since 5.10 is now default, no point in keeping 5.4 around. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: rename RT-AC42U WLAN/LAN LEDsSungbo Eo2022-01-172-8/+10
| | | | | | | | | | Assign LED numbers properly by adding function-enumerator property in DTS. While at it, remove default trigger of LAN LEDs as it will be handled in 01_leds anyway. Fixes: 51b9aef553a8 ("ipq40xx: add support for ASUS RT-ACRH17/RT-AC42U") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ipq40xx: image: remove unused DTB_SIZE variableSungbo Eo2022-01-171-2/+0
| | | | | | It is not included in DEVICE_VARS anyways. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ipq40xx: AP-365: fix non-existent node or label "macaddr_mfginfo_1d"Christian Lamparter2022-01-161-0/+7
| | | | | | | | | | | | | | | | | | | Chen Minqiang reported on github: | DTC arch/arm/boot/dts/qcom-ipq4029-ap-365.dtb |qcom-ipq4019.dtsi:520.23-560.5: ERROR (phandle_references): /soc/wifi@a000000: |Reference to non-existent node or label "macaddr_mfginfo_1d" | | also defined at qcom-ipq4029-aruba-glenmorangie.dtsi:243.8-248.3 |qcom-ipq4019.dtsi:562.23-602.5: ERROR (phandle_references): /soc/wifi@a800000: |Reference to non-existent node or label "macaddr_mfginfo_1d" | | also defined at qcom-ipq4029-aruba-glenmorangie.dtsi:250.8-256.3 |ERROR: Input tree has errors, aborting (use -f to force output) |scripts/Makefile.lib:326: recipe for target 'qcom-ipq4029-ap-365.dtb' failed Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: utilize nvmem-cells for macs & (pre-)calibration dataChristian Lamparter2022-01-1531-131/+487
| | | | | | | | | | | | | | | moves extraction entries out of 11-ath10k-caldata and into the individual board's device-tree. Some notes: - mmc could work as well (not tested) - devices that pass the partitions via mtdparts bootargs are kept as is - gl-b2200 has a weird pcie wifi device (vendor claims 9886 wave 2. But firmware-extraction was for a wave 1 device?!) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add RT-ACRH13 alternative name to RT-AC58UChristian Lamparter2022-01-151-0/+2
| | | | | | RT-ACRH13 is another name this device was sold as (US?). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for ASUS RT-ACRH17/RT-AC42UJoshua Roys2022-01-1511-22/+363
| | | | | | | | | | | | | | | | | | | | | SOC: IPQ4019 CPU: Quad-core ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d DRAM: 256 MB NAND: 128 MiB Macronix MX30LF1G18AC ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4x LAN, 1x WAN) USB: 1x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2x2:2 WLAN2: Qualcomm Atheros QCA9984 5GHz 802.11nac 4x4:4 INPUT: 1x WPS, 1x Reset LEDS: Status, WIFI1, WIFI2, WAN (red & blue), 4x LAN This board is very similar to the RT-ACRH13/RT-AC58U. It must be flashed with an intermediary initramfs image, the jffs2 ubi volume deleted, and then finally a sysupgrade with the final image performed. Signed-off-by: Joshua Roys <roysjosh@gmail.com> (added ALT0) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mikrotik: enable variable size eraseOskari Lemmela2022-01-131-0/+1
| | | | | | | Add support for variable size erase blocks. Enable it to all targets which has mikrotik targets. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* kernel: bump 5.4 to 5.4.169John Audia2022-01-033-5/+5
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/mt7621* *Had to revert 7f1edbd in order to build due to FS#4149 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: 5.10: consolidate mac80211 crypto optionsSergey Ryazanov2021-12-171-2/+0
| | | | | | | | | | | | | | | | | | | | | | Each of - CRYPTO_AEAD2 - CRYPTO_AEAD - CRYPTO_GF128MUL - CRYPTO_GHASH - CRYPTO_HASH2 - CRYPTO_HASH - CRYPTO_MANAGER2 - CRYPTO_MANAGER - CRYPTO_NULL2 either directly required for mac80211 crypto support, or directly selected by such options. Support for the mac80211 crypto was enabled in the generic config since c7182123b9 ("kernel: make cryptoapi support needed by mac80211 built-in"). So move the above options from the target configs to the generic config to make it clear why do we need them. CC: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: filter out both Clang and LLD versionsSergey Ryazanov2021-12-171-1/+0
| | | | | | | | Both CLANG_VERSION and LLD_VERISON are autogenerated runtime configuration options, so add them to the kernel configuration filter and remove from generic and per-target configs to keep configs clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: backport the upstream implementation of threaded NAPI to 5.4Felix Fietkau2021-12-151-2/+2
| | | | | | | The workqueue based implementation has a few corner cases and typically lower performance than the upstream one Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 5.10 to 5.10.83John Audia2021-12-124-4/+4
| | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0024-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch[1] bcm53xx/patches-5.10/033-v5.16-0025-ARM-dts-BCM5301X-Add-interrupt-properties-to-GPIO-no.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=b2cd6fdcbe0a5cb44e4610a08cc58261d494a885 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=9db1d4a3c2700e1cc84c3d61199411d75c2a3ec6 Build system: x86_64* Build-tested: bcm2711/RPi4B, ipq806x/R7800† Run-tested: bcm2711/RPi4B, ipq806x/R7800† * Had to revert 7c99085bd69742f66207d61e9f2da5ec4f8f9d2f in order to build (latest bump of ca-certificates) † Had to revert 7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149) Signed-off-by: John Audia <graysky@archlinux.us>
* ipq40xx: fix reset button GPIO for GL.iNet GL-B2200Enrico Mioso2021-12-121-1/+1
| | | | | | | | | GL.iNet's U-Boot checks for GPIO 40, not 43. Changing this allows the RESET button to work as expected. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> CC: Daniel Golle <daniel@makrotopia.org> CC: Li Zhang <li.zhang@gl-inet.com>
* ipq40xx: nvmem cells for EZVIZ CS-W3-WD1200G EUPChristian Lamparter2021-12-043-6/+34
| | | | | | | | | | introduce nvmem pre-cal + mac-address cells for both Wifis and ethernet on the EZVIZ CS-W3-WD1200G EUP. This is one of the few devices in which the correct mac adress is already at the right place for Wifi, so no separate nvmem cell is needed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: unbreak EZVIZ CS-W3-WD1200G EUP on 5.10Christian Lamparter2021-12-042-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with current images, the device is no longer booting. It gets stuck in the bootloader with "Config not available" and drops to the uboot shell. |flash_type: 0 |Hit any key to stop autoboot: 0 |SF: Detected MX25L12805D with page size 4 KiB, total 16 MiB |Config not availabale |(IPQ40xx) # This is because the default bootcmd "bootipq" will only read the first four MiB of the kernel image. With 5.10 the gzip'd kernel is slightly larger. So the part of the FIT image which had the configuration is cut off. Hence it can't find it. To update the bootcmd, you have to attach the serial console again and enter the following commands into the boot prompt: # setenv bootcmd "sf probe; sf read 84000000 180000 600000; bootm" # saveenv # run bootcmd This will allow booting kernels with up to six MiB. This also allows us to drop the DEVICE_DTS_CONFIG hack we had to use. Note: uboot doesn't support LZMA. It fails with: "Unimplemented compression type 3" Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-03 14:49:59 +0000