aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx/patches-5.15
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.15 to 5.15.123John Audia2023-07-311-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*] bcm27xx/patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch Removed upstreamed: backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1] backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2] pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3] pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4] bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5] bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6] ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch[7] ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch[8] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=02474292a44205c1eb5a03634ead155a3c9134f4 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=86b93cbfe104e99fd3d25a49748b99fb88101573 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=79b9ab357b6f5675007f4c02ff8765cbd8dc06a2 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=5899bc4058e89d5110a23797ff94439c53b77c25 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=95afd2c7c7d26087730dc938709e025a303e5499 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=40844343a8853a08b049d50c967e2a1e28f0ece6 8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=6ad5ded420f5d96f7c65b68135f5787a1c7e58d7 Build system: x86/64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Audia <therealgraysky@proton.me> [rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 8590531048f138ff719c8b317c443a6a7538a762) [Refreshed on top of openwrt-23.05] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq40xx: fix rebooting after 5.15.111Robert Marko2023-05-181-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernel 5.15.111 includes backport of commit ("firmware: qcom_scm: Clear download bit during reboot") which is causing reboot on ipq40xx to stop working, more precisely the board will hang after reboot is called with: root@OpenWrt:/# reboot root@OpenWrt:/# [ 76.473541] device lan1 left promiscuous mode [ 76.474204] br-lan: port 1(lan1) entered disabled state [ 76.527975] device lan2 left promiscuous mode [ 76.530301] br-lan: port 2(lan2) entered disabled state [ 76.579376] device lan3 left promiscuous mode [ 76.581698] br-lan: port 3(lan3) entered disabled state [ 76.638434] device lan4 left promiscuous mode [ 76.638777] br-lan: port 4(lan4) entered disabled state [ 76.978489] qca8k-ipq4019 c000000.switch wan: Link is Down [ 76.978883] device eth0 left promiscuous mode [ 76.987077] ipqess-edma c080000.ethernet eth0: Link is Down [ Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00123 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000010 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1339 - bootable_media_detect_entry, Start B - 1679 - bootable_media_detect_success, Start B - 1693 - elf_loader_entry, Start B - 5076 - auth_hash_seg_entry, Start B - 7223 - auth_hash_seg_exit, Start B - 578349 - elf_segs_hash_verify_entry, Start B - 696356 - PBL, End B - 696380 - SBL1, Start B - 787236 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 788701 - boot_flash_init, Start D - 52782 - boot_flash_init, Delta B - 845625 - boot_config_data_table_init, Start D - 3836 - boot_config_data_table_init, Delta - (419 Bytes) B - 852841 - clock_init, Start D - 7566 - clock_init, Delta B - 864883 - CDT version:2,Platform ID:9,Major ID:0,Minor ID:0,Subtype:64 B - 868413 - sbl1_ddr_set_params, Start B - 873402 - cpr_init, Start D - 2 - cpr_init, Delta B - 877842 - Pre_DDR_clock_init, Start D - 4 - Pre_DDR_clock_init, Delta D - 13234 - sbl1_ddr_set_params, Delta B - 891155 - pm_driver_init, Start D - 2 - pm_driver_init, Delta B - 909105 - Image Load, Start B - 1030210 - Boot error ocuured!. Error code: 303d So, until a proper fix is found, lets revert the culprit patch to have reboot working again. Fixes: 228e0e10398b ("kernel: bump 5.15 to 5.15.111") Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: 5.15: add patch commenting unused sdhci functionChristian Marangi2023-05-121-0/+108
| | | | | | | | | | | | Add patch commenting unused sdhci function, hopin this will be dropped when the problem is actually found. Fix compilation warning: drivers/mmc/host/sdhci-msm.c:1781:13: error: 'sdhci_msm_set_clock' defined but not used [-Werror=unused-function] 1781 | static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) | ^~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: add PSGMII PHY mode to phylink_get_linkmodes()Robert Marko2023-05-121-4/+12
| | | | | | | | | | | | | | | Upstream commit ("net: phylink: add generic validate implementation") was backported, however PSGMII PHY mode patch for ipq40xx was not updated to add PSGMII to phylink_get_linkmodes() so the following warning would be printed during kernel compilation: drivers/net/phy/phylink.c: In function 'phylink_get_linkmodes': drivers/net/phy/phylink.c:360:9: error: enumeration value 'PHY_INTERFACE_MODE_PSGMII' not handled in switch [-Werror=switch] 360 | switch (interface) { | ^~~~~~ Resolve the warning by adding the PSGMII mode to phylink_get_linkmodes(). Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: bump 5.15 to 5.15.109John Audia2023-04-301-1/+1
| | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/743-v6.3-0005-net-dsa-b53-mmap-add-phy-ops.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.109&id=357fa038d93d0e9159a0f0d45bae0f8654e2ade5 Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq40xx: add Intel/Lantiq ATM hacksMartin Schiller2023-01-162-0/+180
| | | | | | | | | | Similar to the lantiq platform, these are required for DSL support. Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com> [switch to kernel 5.10 and 5.15] Signed-off-by: Jan Hoffmann <jan@3e8.eu> [update patches based on UGW 8.5.2.10, remove 5.10 support] Signed-off-by: Andre Heider <a.heider@gmail.com>
* kernel: bump 5.15 to 5.15.87John Audia2023-01-131-1/+1
| | | | | | | | | | | | | Removed upstreamed: generic/hack-5.15/290-net-dsa-mv88e6xxx-depend-on-PTP-conditionally.patch[1] Build system: x86_64 Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.87&id=945e58bdaf6faf6e3f957d182244fa830acddab4 Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq40xx: dts: remove leftover nodes after DSA conversionLech Perczak2022-11-131-13/+1
| | | | | | | | | | | | | | Remove ess-psgmii@98000, edma@c080000 and ess-switch@c000000 nodes. These nodes are not used after the DSA conversion, but were left over in a few devices added recently. ZTE MF289F is omitted on purpose, as for it, these nodes will be removed together with DSA conversion. Build tested only, as I only have MF286D from those devices. Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: bump 5.15 to 5.15.75John Audia2022-10-302-3/+3
| | | | | | | | | | | | | | | | | | | | | Removed upstreamed: bcm27xx/patches-5.15/950-0446-drm-vc4-Fix-timings-for-VEC-modes.patch[1] Manually rebased: patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch All other patches automatically rebased 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.75&id=2810061452f9b748b096ad023d318690ca519aa3 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.72John Audia2022-10-092-3/+3
| | | | | | | | | | | | | | | | | Removed upstreamed: generic/pending-5.15/722-net-mt7531-only-do-PLL-once-after-the-reset.patch[1] bcm53xx/patches-5.15/082-v6.0-clk-iproc-Do-not-rely-on-node-name-for-correct-PLL-s.patch[2] All other patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200, mvebu/cortexa72 Run-tested: bcm2711/RPi4B, mt7622/RT3200, mvebu/cortexa72 (RB5009UG+S+IN) 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.72&id=5de02ab84aeca765da0e4d8e999af35325ac67c2 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.72&id=ab5c5787ab5ecdc4a7ea20b4ef542579e1beb49d Signed-off-by: John Audia <therealgraysky@proton.me>
* ipq40xx: add DSA switch driverRobert Marko2022-10-025-1/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in. It shares most of the stuff with its external counterpart, however it is modified for the SoC. Namely, it doesn't have second CPU port (Port 6), so it has 6 ports instead of 7. It also has no built-in PHY-s but rather requires external PSGMII based companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry out calibration before using them. PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which unfortunately requires some magic values as the datasheet doesnt document the bits that are being set or the register at all. Since its built-in it is MMIO like other peripherals and doesn't have its own MDIO bus but depends on the SoC provided one. CPU connection is at Port 0 and it uses some kind of a internal connection and no traditional RGMII/SGMII. It also doesn't use in-band tagging like other qca8k switches so a shinfo based tagger is used. This is based on the current OpenWrt qca8k version that has been imported from generic target. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: add PSGMII PHY mode defineRobert Marko2022-10-021-0/+61
| | | | | | | | | | | PSGMII is a Qualcomm specific mode similar to QSGMII but it has 5 SGMII lines instead of 4 in QSGMII. This just adds the support for the PHY layer to be able to identify the mode for further use. It is required for the DSA driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: add IPQESS ethernet driverRobert Marko2022-10-022-0/+124
| | | | | | | | | IPQESS is the EDMA replacement driver for the IPQ40xx SoC built-in ethernet controller. Unlike EDMA it is Phylink based and doesnt touch PHY-s directly. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: qca807x: always set PSGMII AZ WARRobert Marko2022-10-021-2/+1
| | | | | | | | | | | | There is no point in using a DT property to trigger setting the PSGMII PHY AZ transmitting ability. Especially since EEE can be disabled using ethtool anyway. Fixup the mask for setting the workaround as only BIT(0) is actually being changed and use the phy_clear_bits_mmd helper instead of reading, then clearing the bit and writing back as it does everything for us. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: add shinfo based DSA tag driverRobert Marko2022-10-022-0/+230
| | | | | | | | | | | | IPQ40xx requires a special DSA tag driver despite using the QCA8337N switch. However they have changed the header format and the existing QCA tag driver cannot be reused. For details on how it actually works and else read the patch commit description. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: drop ESSEDMA + AR40xxRobert Marko2022-10-025-255/+0
| | | | | | | | | | In order to start working on IPQESS + DSA drop the old ESSEDMA + AR40xx driver combo. Remove the kernel symbols, disable swconfig and drop swconfig package as they are not needed anymore. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: point to externally compiled dtbs in recipesTomasz Maciej Nowak2022-09-061-91/+0
| | | | | | | | | | | | | | | | Adjusting dts will cause a rebuild of whole kernel as the buildroot considers this a part of kernel source. It's a royal PITA when trying to prepare support for new device, since this takes a lot of time on slower systems. As it stands, buildroot itself, with own rule, also compiles dtbs and the results are $(KDIR)/image-$(DEVICE_DTS).dtb. With setting DEVICE_DTS_DIR to directory holding the device dts (similarly to some other targets), buildroot doesn't consider changed dts as part of kernel source and rebuilds only dtb. This really speeds up development. And since the kernel built dts are no longer used, drop the paches adding dtses to its build. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* kernel: bump 5.15 to 5.15.64John Audia2022-09-021-2/+2
| | | | | | | | | | All patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.62Petr Štetiar2022-08-232-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Deleted following upstreamed patches: bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch Manually rebased following patches: bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch Runtime tested on turris-omnia and glinet-b1300. Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq40xx: add MikroTik wAP ac (RBwAPG-5HacD2HnD) supportMark Mentovai2022-07-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MikroTik wAP ac (RBwAPG-5HacD2HnD) is a dual-band dual-radio 802.11ac wireless access point with integrated antenna and two Ethernet ports in a weatherproof enclosure. See https://mikrotik.com/product/wap_ac for more information. Important: this is the new ipq40xx-based wAP ac, not the older ath79-based wAP ac (RBwAPG-5HacT2HnD), already supported in OpenWrt. Specifications: - SoC: Qualcomm Atheros IPQ4018 - CPU: 4x ARM Cortex A7 - RAM: 128MB - Storage: 16MB NOR flash - Wireless - 2.4GHz: Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae - 5GHz: Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae - Ethernet: Built-in IPQ4018 (SoC, QCA8075), 2x 1000/100/10Mb/s ports, one with 802.3af/at PoE in Installation: Boot the initramfs image via TFTP, then flash the sysupgrade image using sysupgrade. Details at https://openwrt.org/toh/mikrotik/common. Notes: This preserves the MAC addresses of the physical Ethernet ports: - eth0 corresponds to the physical port labeled ETH1 and has the base MAC address. This port can be used to power the device. - eth1 corresponds to the physical port labeled ETH2 and has a MAC address one greater than the base. MAC addresses are set from /lib/preinit/05_set_iface_mac_ipq40xx.sh rather than /etc/board.d/02_network so that they are in effect for preinit. This should likely be done for other MikroTik devices and possibly other non-MikroTik devices as well. As this device has 2 physical ports, they are each connected to their respective PHYs, allowing the link status to be visible to software. Since they are not marked on the case with any role (such as LAN or WAN), both are bridged to the lan network by default, although this can easily be changed if needed. Signed-off-by: Mark Mentovai <mark@mentovai.com>
* ipq40xx: add support for Meraki MR74Matthew Hagan2022-06-191-1/+2
| | | | | | | | | | | | The Meraki MR74 is part of the "Insect" series. This device is essentially an outdoor variant of the MR33 with identical hardware, but requiring a config@3 DTS option to be set to allow booting with the stock u-boot. The install procedure is replicated from the MR33, with the exception being that the MR74 sysupgrade image must be used. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: move Toshiba-TC58NVG0S3H patch to ipq40xx reduxChristian Lamparter2022-06-191-0/+29
| | | | | | | | | | | | | | | | | | Linux' upstream MTD-Maintainer Miquèl Raynal noted: |Reverting seems the safest option here, not knowing how many devices |have these damaged/counterfeit chips. If it is just a couple and only on |Fritzboxes, as suggested in the Github issue this patch could be |carried through OpenWrt and that would seem more future proof IMHO. This patch follows up with the first patch. It actually moves the patches out of target/linux/generic/pending into the ipq40xx's patch heap and adds a little note what happend. For more information, discussions or reports about bad TC58NVG0S3Hs, please visit the OpenWrt's Github Issue #9962: <https://github.com/openwrt/openwrt/issues/9962> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.15 to 5.15.45Rui Salvaterra2022-06-061-1/+1
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ipq40xx: add support for Linksys WHW01 v1Peter Adkins2022-06-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Linksys WHW01 v1 ("Velop") [FCC ID Q87-03331]. Specification ------------- SOC: Qualcomm IPQ4018 WiFi 1: Qualcomm QCA4019 IEEE 802.11b/g/n WiFi 2: Qualcomm QCA4019 IEEE 802.11a/n/ac Bluetooth: Qualcomm CSR8811 (A12U) Ethernet: Qualcomm QCA8072 (2-port) SPI Flash 1: Mactronix MX25L1605D (2MB) SPI Flash 2: Winbond W25M02GV (256MB) DRAM: Nanya NT5CC128M16IP-DI (256MB) LED Controller: NXP PCA963x (I2C) Buttons: Single reset button (GPIO). Notes ----- There does not appear to be a way to trigger TFTP recovery without entering U-Boot. The device must be opened to access the serial console in order to first flash OpenWrt onto a device from factory. The device has automatic recovery backed by a second set of partitions on the larger of the two SPI flash ICs. Both the primary and secondary must be flashed to prevent accidental rollback to "factory" after 3 failed boot attempts. Serial console -------------- A serial console is available on the following pins of the populated J2 connector on the device mainboard (115200 8n1). (<-- Top of PCB / Device) J2 [o o o o o o] | | | | | `-- GND | `---- TX `--------- RX Installation instructions ------------------------- 1. Setup TFTP server with server IP set to 192.168.1.236. 2. Copy compiled `...squashfs-factory.bin` to `nodes-jr.img` in tftp root. 3. Connect to console using pinout detailed in the serial console section. 4. Power on device and press enter when prompted to drop into U-Boot. 5. Flash first partition device via `run flashimg`. 6. Once complete, reset device and allow to power up completely. 7. Once comfortable with device upgrade reboot and drop back into U-Boot. 8. Flash the second partition (recovery) via `run flashimg2`. Revert to "factory" ------------------- 1. Download latest firmware update from vendor support site. 2. Copy extracted `.img` file to `nodes-jr.img` in tftp root. 3. Connect to console using pinout detailed in the serial console section. 4. Power on device and press enter when prompted to drop into U-Boot. 5. Flash first partition device via `run flashimg`. 6. Once complete, reset device and allow to power up completely. 7. Once comfortable with device upgrade reboot and drop back into U-Boot. 8. Flash the second partition (recovery) via `run flashimg2`. Link: https://github.com/openwrt/openwrt/pull/3682 Signed-off-by: Peter Adkins <peter@sunkenlab.com> (calibration from nvmem, updated to 5.10+5.15) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.15 to 5.15.39John Audia2022-05-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: backport-5.15/850-v5.17-0001-PCI-pci-bridge-emul-Add-description-for-class_revisi.patch backport-5.15/850-v5.17-0002-PCI-pci-bridge-emul-Add-definitions-for-missing-capa.patch backport-5.15/850-v5.17-0003-PCI-aardvark-Add-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch backport-5.15/850-v5.17-0004-PCI-aardvark-Clear-all-MSIs-at-setup.patch backport-5.15/850-v5.17-0005-PCI-aardvark-Comment-actions-in-driver-remove-method.patch backport-5.15/850-v5.17-0006-PCI-aardvark-Disable-bus-mastering-when-unbinding-dr.patch backport-5.15/850-v5.17-0007-PCI-aardvark-Mask-all-interrupts-when-unbinding-driv.patch backport-5.15/850-v5.17-0008-PCI-aardvark-Fix-memory-leak-in-driver-unbind.patch backport-5.15/850-v5.17-0009-PCI-aardvark-Assert-PERST-when-unbinding-driver.patch backport-5.15/850-v5.17-0010-PCI-aardvark-Disable-link-training-when-unbinding-dr.patch backport-5.15/850-v5.17-0011-PCI-aardvark-Disable-common-PHY-when-unbinding-drive.patch pending-5.15/850-0001-PCI-aardvark-Replace-custom-PCIE_CORE_INT_-macros-wi.patch pending-5.15/850-0004-PCI-aardvark-Rewrite-IRQ-code-to-chained-IRQ-handler.patch pending-5.15/850-0005-PCI-aardvark-Check-return-value-of-generic_handle_do.patch pending-5.15/850-0006-PCI-aardvark-Make-MSI-irq_chip-structures-static-dri.patch pending-5.15/850-0007-PCI-aardvark-Make-msi_domain_info-structure-a-static.patch pending-5.15/850-0008-PCI-aardvark-Use-dev_fwnode-instead-of-of_node_to_fw.patch pending-5.15/850-0009-PCI-aardvark-Refactor-unmasking-summary-MSI-interrup.patch pending-5.15/850-0010-PCI-aardvark-Add-support-for-masking-MSI-interrupts.patch pending-5.15/850-0011-PCI-aardvark-Fix-setting-MSI-address.patc pending-5.15/850-0012-PCI-aardvark-Enable-MSI-X-support.patch pending-5.15/850-0013-PCI-aardvark-Add-support-for-ERR-interrupt-on-emulat.patch pending-5.15/850-0015-PCI-aardvark-Optimize-writing-PCI_EXP_RTCTL_PMEIE-an.patch pending-5.15/850-0016-PCI-aardvark-Add-support-for-PME-interrupts.patch pending-5.15/850-0017-PCI-aardvark-Fix-support-for-PME-requester-on-emulat.patch pending-5.15/850-0018-PCI-aardvark-Use-separate-INTA-interrupt-for-emulate.patch pending-5.15/850-0019-PCI-aardvark-Remove-irq_mask_ack-callback-for-INTx-i.patch pending-5.15/850-0020-PCI-aardvark-Don-t-mask-irq-when-mapping.patch pending-5.15/850-0021-PCI-aardvark-Drop-__maybe_unused-from-advk_pcie_disa.patch pending-5.15/850-0022-PCI-aardvark-Update-comment-about-link-going-down-af.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.36Rui Salvaterra2022-05-091-1/+1
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ipq40xx: 5.15: drop upstreamed sleep clock patchRobert Marko2022-05-011-26/+0
| | | | | | | Patch that corrects sleep clock frequency has already been backported to 5.15 stable so remove the duplicate patch. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: 5.15: refresh kernel patchesAnsuel Smith2022-05-0113-26/+26
| | | | | | | Refresh kernel patches. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: 5:15: refresh patchesAnsuel Smith2022-05-014-183/+4
| | | | | | | - Drop upstream patch - Refresh dts patch Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ipq40xx: 5:15: copy config and patch from 5.10Ansuel Smith2022-05-0123-0/+1717
Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 16:11:52 +0000