aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/imx6
Commit message (Collapse)AuthorAgeFilesLines
* kernel: disable CONFIG_USB_IMX21_HCD in default for kernel 4.14Yangbo Lu2019-02-171-1/+0
| | | | | | | | | | | CONFIG_USB_IMX21_HCD should be handled in generic config and module package. So moved it into generic config. This also fixed build issue (kernel config question) of layerscape armv8_32b since it also used ARCH_MXC. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [Deactivate CONFIG_USB_IMX21_HCD also for kernel 4.19] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* imx6: add support for kernel 4.19Koen Vandeputte2019-01-282-0/+541
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: image: ventana: Add missing BOOT_SCRIPT variablePetr Štetiar2018-11-251-0/+1
| | | | | | | | | | This is probably theoretical problem as the Ventana is defined first in the image Makefile, but once the position of the definition would change in the future (alphabetical sorting?) it would get bootscript from the previous board which would have BOOT_SCRIPT set. Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: fix DMA transaction errorsKoen Vandeputte2018-11-063-23/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following errors were seen in the past on imx6 when using serial: [ 22.617622] imx-uart 2020000.serial: DMA transaction error. [ 22.623228] imx-uart 2020000.serial: DMA transaction error. [ 22.628826] imx-uart 2020000.serial: DMA transaction error. [ 22.648951] imx-uart 2020000.serial: DMA transaction error. [ 22.654558] imx-uart 2020000.serial: DMA transaction error. [ 22.660156] imx-uart 2020000.serial: DMA transaction error. Which is the reason why DMA for the serial ports got disabled in commits: efb362cd93b0 ("imx6: disable dma on uart") 3b4241071dd4 ("imx6: disable UART dma") As indicated on mailinglist discussion, the cause seems to be the usage of very old SDMA firmware which is present in the soc: [ 0.624302] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 0.624318] imx-sdma 20ec000.sdma: Falling back to user helper [ 64.531607] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware This patch adds the new firmware binary. (2196 bytes) It is required to embed the binary into the kernel image, as it gets loaded very early in the boot process where the rootfs is not available yet: [ 0.622966] imx-sdma 20ec000.sdma: loaded firmware 3.3 Extended testing shows that the DMA errors are not seen anymore when using this newer firmware version. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.77Koen Vandeputte2018-10-191-0/+1
| | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 666-Add-support-for-MAP-E-FMRs-mesh-mode.patch New symbol for arm targets: - HARDEN_BRANCH_PREDICTOR Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: use BUILD_DEVICES in uboot-imx6 for mx6cuboxiFelix Fietkau2018-09-051-1/+1
| | | | | | Fixes build with the default profile Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: rename Generic profile to Default, fixes u-boot image build issueFelix Fietkau2018-09-051-4/+4
| | | | | | | u-boot.mk checks for the Default profile to build images for all targets. This brings the target default profile in sync with other targets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: extend cubox support to hummingboard, add support for building full imagesFelix Fietkau2018-09-033-12/+54
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: enable f2fs and loopback support in preparation for squashfs with ↵Felix Fietkau2018-09-032-1/+8
| | | | | | overlay support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: Initial support for SolidRun CuBox-i devices based on i.MX6 processors ↵Vladimir Vid2018-08-254-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (i1, i2, i2eX, and i4Pro). - Specifications - CuBox i1: - SoC: i.MX6 Solo - Cores: 1 - Memory Size: 512MB - GPU: GC880 - Wifi/Bluetooth: Optional - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps CuBox i2 | i2eX: - SoC: i.MX6 Dual Lite - Cores: 2 - Memory Size: 1GB - GPU: GC2000 - Wifi/Bluetooth: Optional - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps CuBox i4Pro | i4x4: - SoC: i.MX6 Quad - Cores: 4 - Memory Size: 2/4 GB - GPU: GC2000 - Wifi/Bluetooth: Build In - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps Built-in u-boot requires SPL (secondary program loader) to be present on the SD-card regardless of the image type which will be loaded. SPL is generated by the u-boot-mx6cuboxi package which is preselected by the target device and can be found in bin/u-boot-mx6cuboxi directory. Flashing the SPL: dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=4 dd if=bin/targets/imx6/generic/u-boot-mx6cuboxi/SPL of=/dev/mmcblk0 bs=1K seek=1 Preparing the firmware on the SD-card: (echo o; echo n; echo p; echo 1; echo ''; echo ''; echo w) | fdisk /dev/mmcblk0 mkfs.ext4 /dev/mmcblk0p1 mount /dev/mmcblk0p1 /mnt tar -xzf bin/targets/imx6/generic/openwrt-imx6-device-cubox-i-rootfs.tar.gz -C /mnt/ mkdir -p /mnt/boot cp bin/targets/imx6/generic/{*-uImage,*.dtb,*.scr} /mnt/boot/ Generated u-boot.img needs to be placed on the first partition: cp bin/targets/imx6/generic/u-boot-mx6cuboxi/u-boot.img /mnt/ To boot from the SD card: Boot script which sets mmc/dtb parameters and boots the board is automatically sourced. If this does not work for any reason: mmc dev 0; load mmc 0:1 $scriptaddr boot/boot.scr; source $scriptaddr Currently imx6dl-cubox-i.dtb (Dual Lite) and imx6q-cubox-i.dtb (Quad) device trees are available. Tested on i4Pro, MMC, USB (+ HiD), HDMI and ethernet ports are working. Wireless and bluetooth are broken ATM. According to SolidRun forums, BCM4329/BCM4330 firmware is used which works fine on older kernels. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* kernel: enable THIN_ARCHIVES by defaultSergey Ryazanov2018-05-221-1/+0
| | | | | | | | THIN_ARCHIVES option is enabled by default in the kernel configuration and no one target config disables it. So enable it by default and remove this symbol from target specific configs to keep them light. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: enable FUTEX_PI by defaultSergey Ryazanov2018-05-221-1/+0
| | | | | | | | | New FUTEX_PI configuration symbol enabled if FUTEX and RT_MUTEX symbols are enabled. Both of these symbols are enabled by default in the generic config, so enable FUTEX_PI by default too to keep platform specific configs minimal. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: enable EXPORTFS by defaultSergey Ryazanov2018-05-221-1/+0
| | | | | | | | OVERLAY_FS config symbol selects EXPORTFS since 4.12 kernel, we have OVERLAY_FS enabled by default, so enable EXPORTFS in the generic config of 4.14 and remove this option from platform specific configs. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: disable DRM_LIB_RANDOM by defaultSergey Ryazanov2018-05-221-1/+0
| | | | | | | DRM_LIB_RANDOM config symbol selected only by DRM_DEBUG_MM_SELFTEST which is disable by default, so disable DRM_LIB_RANDOM by default too. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: disable DMA_{NOOP|VIRT}_OPS by defaultSergey Ryazanov2018-05-221-2/+0
| | | | | | | These options do not used by any supported arch, so disable them by default to make arch configs a bit more clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: disable ARCH_WANTS_THP_SWAP by defaultSergey Ryazanov2018-05-221-1/+0
| | | | | | | | Only one arch (x86_64) enables this option. So disable ARCH_WANTS_THP_SWAP by default and remove referencies to it from all configs (except x86_64) to make them clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: generic: Move config option to genericHauke Mehrtens2018-03-021-1/+0
| | | | | | | This is deactivated in all targets using the DSA switch driver with kernel 4.14. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* imx6: disable dma on uartKoen Vandeputte2018-02-221-0/+23
| | | | | | | | | | | | | | | | | | | | | | | When this target got updated to 4.14, this patch got removed to re-evaluate if it was still needed. Extensive testing now shows this issue is still present. Let's re-add the patch to fix it for now. As the uart bus is very low bandwidth .. performance impact is negligible. Boot log: [ 22.513051] imx-uart 2020000.serial: DMA transaction error. [ 22.522721] imx-uart 2020000.serial: DMA transaction error. As a sidenote: The patch mentiones an issue with RS485, but the bootlog errors above were recorded with the uart ports in standard RS232 mode. Compile/Run-tested on imx6/GW5200 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: remove support for 4.9Tim Harvey2018-02-198-1242/+0
| | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: switch to Linux 4.14Tim Harvey2018-02-191-1/+1
| | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: add support for Linux 4.14Tim Harvey2018-02-193-0/+549
| | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* treewide: move nand_do_upgrade call to platform_do_upgradeMathias Kresin2018-02-161-1/+1
| | | | | | | | | | Calling nand_do_upgrade() from platform_pre_upgrade() was deprecated with 30f61a34b4cf ("base-files: always use staged sysupgrade"). Update the platform upgrade code to use platform_do_upgrade() for NAND images as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* imx6: use DTS_DIR at image build codeAdrià Llaudet2018-02-101-1/+1
| | | | | | | | | Use "$(DTS_DIR)", defined at include/image.mk, instead of "$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts" in order to generalize and allow a better Device/* device-tree parameterization (i.e. DEVICE_DTS_DIR and DTS_DIR). Signed-off-by: Adrià Llaudet <adria.llaudet@gmail.com>
* imx6: add support for the intel gbit driver on GW5520Koen Vandeputte2018-01-171-0/+1
| | | | | | | | | | The Gateworks GW5520 board uses 2x intel gigabit mac's, instead of the internal i.MX6 FEC. Add support for these. Signed-off-by: Scott V. Kamp <outbackdingo@gmail.com> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* treewide: add only one device when appending to TARGET_DEVICESLuis Araneda2017-12-121-4/+3
| | | | | | | | | This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
* imx6: add driver for temp/voltage monitoringKoen Vandeputte2017-08-181-0/+3
| | | | | | | The Gateworks System Controller (GSC) mimics a standard AD7418 device on I2C bus 0 at slave 0x29. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: refresh kernel configKoen Vandeputte2017-08-181-5/+0
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* treewide: drop target board_name functionsMathias Kresin2017-07-151-9/+0
| | | | | | They are not used any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: use the generic board_name functionMathias Kresin2017-07-152-6/+3
| | | | | | Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: do board detection during preinitMathias Kresin2017-07-152-1/+9
| | | | | | Do the board detection during preinit to unify it across all targets. Signed-off-by: Mathias Kresin <dev@kresin.me>
* imx6: fix DualLite/Solo GW551X board detectionMathias Kresin2017-07-151-1/+1
| | | | | | The model name is a different one in the device tree source file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: cleanup CONFIG_SCHED_HRTICKStijn Tintel2017-06-291-1/+0
| | | | | | | Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the generic config in b47fd7656336162360ebf66147326763ddae3f8d. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: disable CONFIG_SG_POOL by defaultSergey Ryazanov2017-06-071-0/+1
| | | | | | | | CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last one is disabled by default then disable CONFIG_SG_POOL by default too. And explicitly enable it only for platforms that use CONFIG_SCSI. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* imx6: disable UART dmaKoen Vandeputte2017-05-311-0/+23
| | | | | | | | | | | | | | | | | | | | Fixes these prints on boot: [ 13.785600] imx-uart 2020000.serial: DMA transaction error. [ 13.793134] imx-uart 2020000.serial: DMA transaction error. [ 13.798721] imx-uart 2020000.serial: DMA transaction error. Based on following upstream patch by Tim Harvey (Gateworks): https://github.com/Gateworks/openwrt/commit/80a01b6582f94c4547f39d3a25e0a1e9b6eb9877 TX complete DMA messages are getting missed. This is also currently an issue in mainline. For now we will disable DMA in serial/imx.c. This resolves an issue encountered with RS485 transmit. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: update kernel 4.9 to 4.9.29Koen Vandeputte2017-05-211-42/+0
| | | | | | | | | | | | | - Refresh all patches - Removed upstreamed - Adapted 1 Compile tested on: bcm53xx, cns3xxx, imx6, lantiq Run tested on: cns3xxx & imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [update from 4.9.28 to 4.9.29] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* imx6: remove linux 4.4 supportFelix Fietkau2017-05-0226-3811/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: ventana: add GW553x board identificationTim Harvey2017-04-261-0/+5
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: disable MSI interruptsTim Harvey2017-04-262-40/+24
| | | | | | | | | | | | The IMX6 PCIe host controller does not fire legacy interrupts if MSI is enabled. A patch is being worked on to enable MSI at runtime only when it is needed but meanwhile this patch will disable MSI for the imx6 kernel. This fixes the no interrupt issue on cards/drivers that use legacy interrupts such as ath9k. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: apply upstream mmc fix for DDR50 cards on UHS-I capable boardsTim Harvey2017-04-261-0/+42
| | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git/commit/?h=fixes&id=9f327845358d3dd0d8a5a7a5436b0aa5c432e757 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* kernel: update kernel 4.4 to 4.4.59Hauke Mehrtens2017-04-022-22/+22
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* imx6: add DSA driver for MV88E6176 switchTim Harvey2017-03-121-0/+8
| | | | | | | | | The MV88E6176 switch is present on the GW16083 and the GW5904 As of a5c32a1f1996f4f75504c4a9abd1c99eaa598df1 these drivers are to be enabled static in per-target kernels. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: add support for GW5904Tim Harvey2017-03-127-2/+699
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: added fixfdt to bootscriptTim Harvey2017-03-121-0/+3
| | | | | | | If a 'fixfdt' uboot script exists, execute it prior to bootm to allow easy bootloader env based fdt fixups and tweaks Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: add missing dtb for imx6dl-gw553xTim Harvey2017-03-121-0/+1
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: fix USB for 4.9 kernelTim Harvey2017-03-121-0/+8
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: move to Linux 4.9 kernelTim Harvey2017-02-113-1/+532
| | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: refresh kernel configKoen Vandeputte2017-01-271-1/+0
| | | | | | | This key got moved to generic in commit: 7480d3309cbe40378da48c3b6decc4ba2b1fc3d5 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* Kernel: bump to 4.4.44Stijn Segers2017-01-274-29/+10
| | | | | | | | Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64. .44 has been run-tested on the 17.01 branch here on ar71xx and mt7621. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* imx6: kernel: Backport serial port fixesPetr Štetiar2017-01-154-0/+249
| | | | Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: enable the crypto acceleration driver in the kernel config instead of ↵Felix Fietkau2017-01-101-0/+16
| | | | | | packaging it Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 05:10:31 +0000