aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/imx6/image
Commit message (Collapse)AuthorAgeFilesLines
* imx6: Add support for Toradex Apalis family of CoMsPetr Štetiar2019-04-083-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the following computer on modules (CoM) from Toradex[A]: Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC -40° to +85° C Temp Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC 0° to +70° C Temp Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC -40° to +85° C Temp Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC 0° to +70° C Temp I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on Eval[C] board as well. A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6 B. https://www.toradex.com/products/carrier-board/ixora-carrier-board C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board Flashing/recovery instructions: 1. Download and compile imx_loader for OpenWrt from https://github.com/ynezz/imx_loader 2. Enter recovery mode as desribed in https://developer.toradex.com/knowledge-base/imx-recovery-mode 3. Connect board via USB to the host computer, check that it's connected by lsusb: 15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip in RecoveryMode 4. Copy following OpenWrt images to imx_loader directory: SPL u-boot.img u-boot-with-spl.imx openwrt-imx6-apalis-recovery.scr openwrt-imx6-apalis-squashfs.combined.bin 5. Run imx_usb in imx_loader directory Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: image: Split imx6-sdcard image for reusabilityPetr Štetiar2019-04-081-3/+16
| | | | | | | I'm going to reuse the imx6-sdcard image commands for building of Apalis eMMC images. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: image: ventana: Add missing BOOT_SCRIPT variablePetr Štetiar2018-11-251-0/+1
| | | | | | | | | | This is probably theoretical problem as the Ventana is defined first in the image Makefile, but once the position of the definition would change in the future (alphabetical sorting?) it would get bootscript from the previous board which would have BOOT_SCRIPT set. Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: use BUILD_DEVICES in uboot-imx6 for mx6cuboxiFelix Fietkau2018-09-051-1/+1
| | | | | | Fixes build with the default profile Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: extend cubox support to hummingboard, add support for building full imagesFelix Fietkau2018-09-032-11/+53
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: Initial support for SolidRun CuBox-i devices based on i.MX6 processors ↵Vladimir Vid2018-08-252-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (i1, i2, i2eX, and i4Pro). - Specifications - CuBox i1: - SoC: i.MX6 Solo - Cores: 1 - Memory Size: 512MB - GPU: GC880 - Wifi/Bluetooth: Optional - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps CuBox i2 | i2eX: - SoC: i.MX6 Dual Lite - Cores: 2 - Memory Size: 1GB - GPU: GC2000 - Wifi/Bluetooth: Optional - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps CuBox i4Pro | i4x4: - SoC: i.MX6 Quad - Cores: 4 - Memory Size: 2/4 GB - GPU: GC2000 - Wifi/Bluetooth: Build In - USB 2.0 ports: 2 - Ethernet: 10/100/1000 Mbps Built-in u-boot requires SPL (secondary program loader) to be present on the SD-card regardless of the image type which will be loaded. SPL is generated by the u-boot-mx6cuboxi package which is preselected by the target device and can be found in bin/u-boot-mx6cuboxi directory. Flashing the SPL: dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=4 dd if=bin/targets/imx6/generic/u-boot-mx6cuboxi/SPL of=/dev/mmcblk0 bs=1K seek=1 Preparing the firmware on the SD-card: (echo o; echo n; echo p; echo 1; echo ''; echo ''; echo w) | fdisk /dev/mmcblk0 mkfs.ext4 /dev/mmcblk0p1 mount /dev/mmcblk0p1 /mnt tar -xzf bin/targets/imx6/generic/openwrt-imx6-device-cubox-i-rootfs.tar.gz -C /mnt/ mkdir -p /mnt/boot cp bin/targets/imx6/generic/{*-uImage,*.dtb,*.scr} /mnt/boot/ Generated u-boot.img needs to be placed on the first partition: cp bin/targets/imx6/generic/u-boot-mx6cuboxi/u-boot.img /mnt/ To boot from the SD card: Boot script which sets mmc/dtb parameters and boots the board is automatically sourced. If this does not work for any reason: mmc dev 0; load mmc 0:1 $scriptaddr boot/boot.scr; source $scriptaddr Currently imx6dl-cubox-i.dtb (Dual Lite) and imx6q-cubox-i.dtb (Quad) device trees are available. Tested on i4Pro, MMC, USB (+ HiD), HDMI and ethernet ports are working. Wireless and bluetooth are broken ATM. According to SolidRun forums, BCM4329/BCM4330 firmware is used which works fine on older kernels. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* imx6: use DTS_DIR at image build codeAdrià Llaudet2018-02-101-1/+1
| | | | | | | | | Use "$(DTS_DIR)", defined at include/image.mk, instead of "$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts" in order to generalize and allow a better Device/* device-tree parameterization (i.e. DEVICE_DTS_DIR and DTS_DIR). Signed-off-by: Adrià Llaudet <adria.llaudet@gmail.com>
* treewide: add only one device when appending to TARGET_DEVICESLuis Araneda2017-12-121-4/+3
| | | | | | | | | This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
* imx6: add support for GW5904Tim Harvey2017-03-121-1/+3
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: added fixfdt to bootscriptTim Harvey2017-03-121-0/+3
| | | | | | | If a 'fixfdt' uboot script exists, execute it prior to bootm to allow easy bootloader env based fdt fixups and tweaks Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: add missing dtb for imx6dl-gw553xTim Harvey2017-03-121-0/+1
| | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: enable the chipidea usb driver in the kernel config instead of ↵Felix Fietkau2017-01-101-3/+1
| | | | | | packaging it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: remove kmod-thermal-imx, it is already enabled in the kernel configFelix Fietkau2017-01-101-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: build support for the ventana ethernet expansion board into the kernel ↵Felix Fietkau2017-01-101-1/+1
| | | | | | instead of packaging it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix image boot ubifs compression optionFelix Fietkau2017-01-091-1/+1
| | | | | | --force-compr was added by the xz compression patch, which is gone now. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: drop UBI EOF marker from images by defaultFelix Fietkau2016-09-121-1/+0
| | | | | | | | Only add them where they are actually required. Should help with compatibility issues with stock U-Boot images that access UBI Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image: use k as unit suffix for blocksizeMathias Kresin2016-09-041-2/+2
| | | | | | | Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
* imx6: image: remove pca955x/ds1672/at24 from Ventana kernel modulesTim Harvey2016-09-081-1/+1
| | | | | | These need to be static in the kernel for Ventana Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: add GW553x supportTim Harvey2016-09-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Gateworks Ventana GW553x is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * small form factor (35x70mm) * 512MB DDR3 DRAM (2x32bit) (options up to 2GB) * 256MB NAND flash (4GB option) * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCI socket (with PCIe, USB, SIM) * 1x microSD socket * 1x SIM socket * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * analog CVBS video in * GPS (optional uBlox EVA-M8M) * Application headers: - 2x TTL UART (TX/RX) - 4x TTL GPIO (3x configurable as PWM) - 3x CVBS Analog video input (1x decoder with 3x selectable inputs) * Front panel connectors: * micro-HDMI audio/video out - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG See http://www.gateworks.com for more info Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx6: disable EOF markers on UBIFelix Fietkau2016-08-311-0/+1
| | | | | | The boot loader does not recognize them and might mess up the volume Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: Fix pointing to msata/mmc bootdevsKoen Vandeputte2016-08-221-4/+4
| | | | | | | | | Point to correct devices when booting from msata or MMC Changes fetched from Gateworks git Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [Jo-Philipp Wich: rebased to apply against current LEDE version] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* imx6: fix generating bootfs in imagebuilder (FS#102)Jo-Philipp Wich2016-08-201-1/+7
| | | | | | | | | | | | The image builder does not bundle sub-directories within $(KERNEL_BUILD_DIR), therfore the intermediate "ventana-uImage.boot" directory is not shipped, leading to failures with "make image" later on. To circumvent the issue, store the intermediate boot files as tar archive instead of putting them into a directory to ensure that they end up in the final image builder tarball. Fixes FS#102 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* imx6: clean up / fix ventana image build codeFelix Fietkau2016-07-311-69/+43
| | | | | | | | | Fix ubifs mkfs options Use standard Build/* commands instead of doing everything in the hackish ubi-boot-overlay template Fix bootfs.tar.gz build error Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: use ubinize-image.sh to fix build with per-device rootfsFelix Fietkau2016-07-313-64/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* image.mk: clean up redundant code related to DEVICE_DTSFelix Fietkau2016-07-151-3/+0
| | | | | | | | It is used by a core build template, so the variable should be initialized and added to DEVICE_VARS in the core. Same for DEVICE_DTS_DIR Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix redundant PROFILES overrides in image makefileFelix Fietkau2016-07-021-2/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix build breakage introduced in 9e41c3f54e3cFelix Fietkau2016-07-021-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: fix image makefile indentation for Device/ sectionsFelix Fietkau2016-07-021-40/+40
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: move profile definitions to the image/MakefileJohn Crispin2016-05-231-3/+12
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* branding: add LEDE brandingJohn Crispin2016-03-241-1/+1
| | | | Signed-off-by: John Crispin <blogic@openwrt.org>
* imx6: images: add bootfs.tar.gz build artifactLuka Perkov2016-04-191-1/+30
| | | | | | | | | | In order to create a bootable block storage device, both bootfs and rootfs tarballs are required. However, our current scheme does not export a bootfs tarball so add the packaging of it here. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 49196
* imx6: image: Add missing kernel prefixJohn Crispin2016-03-041-0/+1
| | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 48909
* imx6: images: ventana: change name of ubi outputLuka Perkov2015-12-291-3/+4
| | | | | | | | | | | | | | Change the name of the .ubi produced to strip out the word 'factory'. This is mainly due to the fact that there is no difference between the Ventana 'factory' image vs the standard image. Name changes from: openwrt-imx6-ventana-squashfs.nand-factory_<size>.ubi to openwrt-imx6-ventana-squashfs-nand_<size>.ubi Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48016
* imx6: ventana: remove invalid video options from bootscriptLuka Perkov2015-11-201-75/+1
| | | | | | | | | Removed video related kernel params that are only appropriate for the Freescale downstream vendor kernel and not appriate for mainline linux. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47532
* imx6: convert ventana images to squashfs+ubifs overlayLuka Perkov2015-11-183-111/+285
| | | | | | | | | | | | | | | | | | | | | | Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
* imx6: image: Remove custom mkfs targz override as base should be fine nowFelix Fietkau2015-10-311-5/+0
| | | | | | | | | It was wrong anyway, missing file sort order parameter which was fixed in base month ago. Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47312
* imx6: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variableFelix Fietkau2015-10-311-13/+9
| | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47308
* imx6: make the default config bootable on ventanaJohn Crispin2014-11-241-3/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43369
* imx6: fix image build for Generic profile.Luka Perkov2014-09-091-5/+7
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 42455
* imx6: drop ventana kernel/rootfs hackLuka Perkov2014-08-081-3/+3
| | | | | | | | | In r41578 this was added in order to make default images bootable for the BB release. We need more generic approach for this. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42071
* target/linux/*/image/Makefile: use new dts path variableJohn Crispin2014-07-211-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41791
* imx6: put kernel and dtb into rootfs by defaultJohn Crispin2014-07-101-3/+3
| | | | | | | | this will make the rc1 images boot with the default config. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41578
* imx6: merge all gateworks boards into one profileLuka Perkov2013-11-181-16/+15
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38858
* imx6: add support for more then one nand type per profileLuka Perkov2013-11-181-8/+22
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38857
* imx6: minor image cleanupLuka Perkov2013-10-311-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38628
* imx6: use more descriptive function nameLuka Perkov2013-10-231-6/+6
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38521
* imx6: use more common name for ubi(fs) imagesLuka Perkov2013-10-231-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38520
* imx6: add support for building uImageLuka Perkov2013-10-231-5/+25
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38518
* imx6: fix symlink of dtb filesLuka Perkov2013-10-231-1/+1
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38510
* imx6: make symlinks for dtb'sLuka Perkov2013-10-221-0/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38496