aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic
Commit message (Collapse)AuthorAgeFilesLines
* Revert "generic: 5.4: Add 4B_OPCODES flag to w25q256"Chuanhong Guo2020-04-056-35/+8
| | | | | | | | | | | This reverts commit d7f21940bcaf70ba404d354c7fa6519c1717d00a. Winbond W25Q256FV and W25Q256JV both uses 0xef4019 as JEDEC ID, but only the latter has proper 4B_OPCODES support. W25Q256FV has all 4B read instructions but it lacks a 4B page program instruction, causing the entire flash to be read-only. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: rtl8367b: use id as a bit offset for BYPASS_LINE_RATEINAGAKI Hiroshi2020-04-041-4/+2
| | | | | | | | | | | | | | | | | In RTL8367B (RTL8367RB/RTL8367R-VB), the driver in GPL tars of the devices with this switch directly uses the ID of external interface as a bit offset. We should use the same way. ref (RTL8367B): - ASUS RT-N56U - TP-Link Archer C2 v1 ref (RTL8367): - TP-Link TL-WR2543ND v1 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: rtl8367b: fix DEBUG register address for extif2INAGAKI Hiroshi2020-04-041-1/+1
| | | | | | | | RTL8367B_CHIP_DEBUG1_REG (0x1304) is for external interface 1. For external interface 2, use RTL8367B_CHIP_DEBUG2_REG (0x13e2) instead. Fixes: 9801d61c4a ("kernel: rtl8367b: add configuration for extif2") Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* generic: mt7530: fix null pointer dereferencing in port5 setupDENG Qingfang2020-04-041-0/+39
| | | | | | | | | | | | | The 2nd gmac of mediatek soc ethernet may not be connected to a PHY and a phy-handle isn't always available. Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always connected to switch port 5 and setup mt7530 according to phy address of 2nd gmac node, causing null pointer dereferencing when phy-handle isn't defined in dts. This commit fix this setup code by checking return value of of_parse_phandle before using it. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* generic: backport support for MT7530 DSA port mirroringDENG Qingfang2020-04-041-0/+123
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* kmod-sched-cake: switch to in-tree cake for 4.19+Kevin Darbyshire-Bryant2020-04-015-0/+625
| | | | | | | | | | | | | | Use in tree version of cake for kernels 4.19+ and backport features from later kernel versions to 4.19. Unfortunately PROVIDES dependency handling produces bogus circular dependency warnings so whilst this package and kmod-sched-cake-oot should be able to PROVIDE kmod-sched-cake this doesn't work. Instead, remove the PROVIDES option and modify package sqm-scripts to depend on the correct module independently. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* generic: mips: exclude more dsemul code when fpu-emu is not enabledYousong Zhou2020-03-301-0/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch is backported from mips-next. In addition to minor reduction of code size and runtime memory use, the more apparent difference is that the delay slot emulation page will not be present for those targets with fpu emulation disabled (CONFIG_MIPS_FP_SUPPORT=n) Memory maps of busybox before and after this change root@OpenWrt:/# cat /proc/self/maps 00400000-00449000 r-xp 00000000 00:02 23 /bin/busybox 00458000-00459000 r-xp 00048000 00:02 23 /bin/busybox 00459000-0045a000 rwxp 00049000 00:02 23 /bin/busybox 77dc0000-77de2000 r-xp 00000000 00:02 273 /lib/libgcc_s.so.1 77de2000-77de3000 r-xp 00012000 00:02 273 /lib/libgcc_s.so.1 77de3000-77de4000 rwxp 00013000 00:02 273 /lib/libgcc_s.so.1 77de4000-77e7b000 r-xp 00000000 00:02 271 /lib/libc.so 77e8a000-77e8c000 rwxp 00096000 00:02 271 /lib/libc.so 77e8c000-77e8e000 rwxp 00000000 00:00 0 7fd86000-7fda7000 rw-p 00000000 00:00 0 [stack] 7fefd000-7fefe000 r-xp 00000000 00:00 0 7ffe6000-7ffe7000 r--p 00000000 00:00 0 [vvar] 7ffe7000-7ffe8000 r-xp 00000000 00:00 0 [vdso] root@OpenWrt:/# cat /proc/self/maps 00400000-00449000 r-xp 00000000 00:02 23 /bin/busybox 00458000-00459000 r-xp 00048000 00:02 23 /bin/busybox 00459000-0045a000 rwxp 00049000 00:02 23 /bin/busybox 77d55000-77d77000 r-xp 00000000 00:02 274 /lib/libgcc_s.so.1 77d77000-77d78000 r-xp 00012000 00:02 274 /lib/libgcc_s.so.1 77d78000-77d79000 rwxp 00013000 00:02 274 /lib/libgcc_s.so.1 77d79000-77e10000 r-xp 00000000 00:02 272 /lib/libc.so 77e1f000-77e21000 rwxp 00096000 00:02 272 /lib/libc.so 77e21000-77e23000 rwxp 00000000 00:00 0 7fe23000-7fe44000 rw-p 00000000 00:00 0 [stack] 7ff63000-7ff64000 r--p 00000000 00:00 0 [vvar] 7ff64000-7ff65000 r-xp 00000000 00:00 0 [vdso] Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: Enable CMOS RTC support on 5.4Kevin Darbyshire-Bryant2020-03-291-1/+1
| | | | | | | | | Enable kernel symbol CONFIG_RTC_DRV_CMOS which was enabled in 4.14 & 4.19 Fixes FS#2905 and now my APU2 picks up time from RTC Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* treewide: Don't diverge from upstream default HZ settings on 4.19Daniel Engberg2020-03-292-4/+4
| | | | | | | | | | | Most targets upstream use 250Hz or even 1000Hz by default while 100Hz is hardcoded in OpenWrt's default config. Use upstream default except for apm821xx which hardsets 1000Hz instead of platform default of 250Hz. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [Apply same changes to 5.4] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: generic: 5.4: fix mtd concat panic on read/write functionsMichal Cieslakiewicz2020-03-291-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2431c4f5b46c32c4ac495456b1ef4ce59c0bb85d ("mtd: Implement mtd_{read,write}() as wrappers around mtd_{read,write}_oob()") for kernel 5.4 restrict mtd devices to register only one type of read/write functions (either generic or OOB). mtd concat does not follow above rule and defines both methods at the same time, causing this type of device to be rejected by kernel. For routers that use mtd concat for root UBI volume that means kernel panic and boot loop with following error: [ 0.767307] Creating 1 MTD partitions on "ubi-concat": [ 0.772547] 0x000000000000-0x000007500000 : "ubi" [ 0.777953] ------------[ cut here ]------------ [ 0.782683] WARNING: CPU: 0 PID: 1 at drivers/mtd/mtdcore.c:621 add_mtd_device+0x84/0x5f4 [ 0.790983] Modules linked in: [ 0.794093] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.24 #0 [ 0.799932] Stack : 80680000 8062af20 00000000 00000000 8062a0f0 87c2dae4 87c282fc 8065fd23 [ 0.808430] 805c64f4 00000001 807b32d8 80670000 80670000 00000001 87c2da98 25c15bcb [ 0.816909] 00000000 00000000 807e0000 0000006e 61696e74 00000000 2e342e32 34202330 [ 0.825397] 0000006e cef2ada7 00000000 000c1ded 00000000 00000009 00000000 8034de64 [ 0.833889] 00000009 80670000 80670000 80676d18 00000000 80320044 00000000 807b0000 [ 0.842381] ... [ 0.844861] Call Trace: [ 0.847367] [<80069994>] show_stack+0x30/0x100 [ 0.851913] [<8007e8ac>] __warn+0xc0/0x10c [ 0.856072] [<8007e954>] warn_slowpath_fmt+0x5c/0xac [ 0.861134] [<8034de64>] add_mtd_device+0x84/0x5f4 [ 0.866001] [<80352a50>] add_mtd_partitions+0xd8/0x1b8 [ 0.871231] [<803527b8>] parse_mtd_partitions+0x238/0x3f8 [ 0.876717] [<8034e51c>] mtd_device_parse_register+0x48/0x1b0 [ 0.882586] [<8038dd2c>] virt_concat_probe+0x170/0x1ec [ 0.887820] [<803334c8>] platform_drv_probe+0x40/0x94 [ 0.892970] [<80331638>] really_probe+0x104/0x35c [ 0.897766] [<80331d54>] device_driver_attach+0x70/0x98 [ 0.903072] [<80331ddc>] __driver_attach+0x60/0x100 [ 0.908042] [<8032f668>] bus_for_each_dev+0x68/0xa4 [ 0.912989] [<803309d4>] bus_add_driver+0x1f0/0x200 [ 0.917952] [<80332448>] driver_register+0x84/0x148 [ 0.922906] [<80060a1c>] do_one_initcall+0x7c/0x1dc [ 0.927870] [<80684e14>] kernel_init_freeable+0x158/0x23c [ 0.933361] [<805387d8>] kernel_init+0x10/0xf0 [ 0.937883] [<80064dd8>] ret_from_kernel_thread+0x14/0x1c [ 0.943375] ---[ end trace 62e0927fba490f68 ]--- [...] [ 2.266513] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.274893] Rebooting in 1 seconds.. This patch makes mtd concat to follow new mtd requirements by registering either normal or oob versions of read/write functions, but not both at the same time. OOB is used only when underlying mtd devices provide such functionality (like NAND chips) - otherwise generic methods are used. Tested successfully on Netgear WNDR4300. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* kernel: update arc-specific patchEvgeniy Didin2020-03-291-11/+11
| | | | | | | | | | | This patch updates arc-specific patch by moving declaration of struct object before it's usage. Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Petr Štetiar <ynezz@true.cz> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org>
* kernel: bump 5.4 to 5.4.28Petr Štetiar2020-03-2811-125/+24
| | | | | | | | | | | | | | | | | | | | Changelog since 5.4.24 mentions CVE-2019-19769, CVE-2020-8648, CVE-2020-8649 and CVE-2020-8647. Removed upstreamed: generic: 507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch generic: 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch bcm27xx: 950-0435-ASoC-pcm512x-Fix-unbalanced-regulator-enable-call-in.patch ipq806x: 701-stmmac-fix-notifier-registration.patch lantiq: 002-pinctrl-falcon-fix-syntax-error.patch octeontx: 0002-net-thunderx-workaround-BGX-TX-Underflow-issue.patch Run tested: apu2, qemu-x86-64, apalis, a64-olinuxino, nbg6617 Build tested: sunxi/a53, imx6, x86/64, ipq40xx Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: 5.4: disable more symbolsChristian Lamparter2020-03-211-0/+8
| | | | | | | These have been discovered by the gemini 5.4 patches. This is because one of the devices uses the FBDEV emulation. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: backport and package drivetemp hwmon from v5.5Christian Lamparter2020-03-213-0/+945
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch backports the hwmon drivetemp sensor module from vanilla linux 5.5 to be available on OpenWrt's 5.4 kernel. Extract from The upstream commit by Guenter Roeck <linux@roeck-us.net>: hwmon: Driver for disk and solid state drives with temperature sensors "Reading the temperature of ATA drives has been supported for years by userspace tools such as smarttools or hddtemp. The downside of such tools is that they need to run with super-user privilege, that the temperatures are not reported by standard tools such as 'sensors' or 'libsensors', and that drive temperatures are not available for use in the kernel's thermal subsystem. This driver solves this problem by adding support for reading the temperature of ATA drives from the kernel using the hwmon API and by adding a temperature zone for each drive. With this driver, the hard disk temperature can be read [...] using sysfs: $ grep . /sys/class/hwmon/hwmon9/{name,temp1_input} /sys/class/hwmon/hwmon9/name:drivetemp /sys/class/hwmon/hwmon9/temp1_input:23000 If the drive supports SCT transport and reports temperature limits, those are reported as well. drivetemp-scsi-0-0 Adapter: SCSI adapter temp1: +27.0<C2><B0>C (low = +0.0<C2><B0>C, high = +60.0<C2><B0>C) (crit low = -41.0<C2><B0>C, crit = +85.0<C2><B0>C) (lowest = +23.0<C2><B0>C, highest = +34.0<C2><B0>C) The driver attempts to use SCT Command Transport to read the drive temperature. If the SCT Command Transport feature set is not available, or if it does not report the drive temperature, drive temperatures may be readable through SMART attributes. Since SMART attributes are not well defined, this method is only used as fallback mechanism." This patch incorperates a patch made by Linus Walleij: 820-libata-Assign-OF-node-to-the-SCSI-device.patch This patch is necessary in order to wire-up the drivetemp sensor into the device tree's thermal-zones. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: connmark set-dscpmark fix build on 5.4Kevin Darbyshire-Bryant2020-03-211-2/+2
| | | | | | | | | | | | | | | | Fix header change that was done for kernel but 4.19 got missed for 5.4. Solves nasty errors like: 8.4.0_musl/include/linux/netfilter/xt_CONNMARK.h:5, from connmark_listener.c:30: /builder/shared-workdir/build/sdk/staging_dir/toolchain-aarch64_cortex-a53_gcc-8.4.0_musl/include/linux/netfilter/xt_connmark.h:23:2: error: enumerator value for 'XT_CONNMARK_VALUE' is not an integer constant XT_CONNMARK_VALUE = BIT(0), ^~~~~~~~~~~~~~~~~ /builder/shared-workdir/build/sdk/staging_dir/toolchain-aarch64_cortex-a53_gcc-8.4.0_musl/include/linux/netfilter/xt_connmark.h:25:1: error: enumerator value for 'XT_CONNMARK_DSCP' is not an integer constant }; Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: rtl8367b: add configuration for extif2Serge Vasilugin2020-03-211-5/+42
| | | | | | | | | | | | | | | | | | | | | | Both rtl8367b and rtl8367s have two extended interface rtl8367rb: 5 port + 2*RGMII/MII rtl8367s: 5 port + SGMII/HSGMI + RGMII/MII (?)rtl8367sb: 5 port + 2*RGMII/MII These interfaces correspond to EXT1 and EXT2 (ports 6 and 7 respectivly). This patch allow to configure EXT2 in dts-file: rtl8367rb { compatible = "realtek,rtl8367b"; cpu_port = <7>; realtek,extif2 = <1 0 1 1 1 1 1 1 2>; mii-bus = <&mdio0>; phy_id = <29>; }; Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> [fix indent, replace magic value, alter commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: rtl8367b: add definition of debug regChuanhong Guo2020-03-211-5/+30
| | | | | | | This commit adds definition of DEBUG0 and DEBUG1 registers and replace magic values with proper register modifying. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: move TEO governor to generic configTomasz Maciej Nowak2020-03-171-0/+1
| | | | | | | | This new symbol popped up in few places. Disable it in generic config. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [fixed merge conflict in generic/config-5.4] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* lantiq: add Linux 5.4 support as testing kernel versionMathias Kresin2020-03-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to the mainline Lantiq PCIe PHY driver and update the vr9.dtsi accordingly. The Lantiq IRQ SMP support added upstream required changes to the SoC dtsi as well. Following changes are made to the Lantiq kernel patches: 0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch 0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch applied upstream 0008-MIPS-lantiq-backport-old-timer-code.patch access_ok API update because it lost it's type (which was the first) parameter in upstream commit 96d4f267e40f95 ("Remove 'type' argument from access_ok() function") 0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch merged into 0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch 0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch revert upstream changes required for upstream xrx200 ethernet and xrx200 (DSA) switch driver but breaking our driver 0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch required for our driver but dropped upstream, add former upstream version 0028-NET-lantiq-various-etop-fixes.patch now has to use the phy_set_max_speed API instead of modifying phydev->supported. Also call ltq_dma_enable_irq() in ltq_etop_open() based on upstream commit cc973aecf0b054 ("MIPS: lantiq: Do not enable IRQs in dma open") Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* generic: make all phy drivers kernel 5.0 compatibleMathias Kresin2020-03-163-0/+21
| | | | | | | | It adjusts the code to upstream changes from the commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: move disabled symbols into generic kconfigAleksander Jan Bajkowski2020-03-161-0/+54
| | | | | | Move some disabled kconfig options found in sunxi kconfig into generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: sort generic configurationAleksander Jan Bajkowski2020-03-162-20/+14
| | | | | | | | | | | | This was done by executing these commands: $ ./scripts/kconfig.pl '+' target/linux/generic/config-4.19 /dev/null > target/linux/generic/config-4.19-new $ mv target/linux/generic/config-4.19-new target/linux/generic/config-4.19 $ ./scripts/kconfig.pl '+' target/linux/generic/config-5.4 /dev/null > target/linux/generic/config-5.4-new $ mv target/linux/generic/config-5.4-new target/linux/generic/config-5.4 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: 5.4: add unconfigured symbolsTim Harvey2020-03-121-0/+3
| | | | | | | This patch adds a few symbols that I found that need disabling in order to not break the build of octeontx Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* generic: 5.4: Add 4B_OPCODES flag to w25q256Robert Marko2020-03-126-8/+35
| | | | | | | This patch backports the upstream patch that adds the 4B_OPCODES flag to w25q256 under 5.4 kernel. This is needed for ipq40xx and ramips. Signed-off-by: Robert Marko <robimarko@gmail.com>
* generic: 4.19: Add 4B_OPCODES flag to w25q256Robert Marko2020-03-126-7/+34
| | | | | | This patch backports the upstream patch that adds the 4B_OPCODES flag to w25q256 under 4.19 kernel. This is needed for ipq40xx and ramips. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: backport out-of-memory fix for non-Ethernet devicesRafał Miłecki2020-03-113-0/+213
| | | | | | | Doing up & down on non-Ethernet devices (e.g. monitor mode interface) was consuming memory. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: 5.4: move some kconfig options to genericYousong Zhou2020-03-101-3/+9
| | | | | | | | | | | CONFIG_64BIT_TIME=y CONFIG_KASAN_STACK=1 CONFIG_UBSAN_ALIGNMENT=y CONFIG_UNIX_SCM=y CONFIG_DMA_DECLARE_COHERENT=y CONFIG_OF_RESERVED_MEM=y Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: bump 5.4 to 5.4.24Koen Vandeputte2020-03-0913-34/+34
| | | | | | | | | Refreshed all patches. Compile-tested on: imx6 Runtime-tested on: imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.19 to 4.19.108Koen Vandeputte2020-03-0911-64/+30
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.172Koen Vandeputte2020-03-091-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: backport mtd partition address fix sent upstreamRafał Miłecki2020-03-096-6/+87
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: 5.4: backport led register fixSungbo Eo2020-03-091-0/+36
| | | | | | Fixes issues with loading trigger-sources for usbport trigger from DTS. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ipq40xx: add IPQ4019 SD/MMC controller supportRobert Marko2020-03-092-22/+1
| | | | | | | | | | This commit finally adds support for the built in SD/MMC controller in IPQ4019 SoC. Controller is supported by the upstream SDHCI-MSM driver with a minor clock setting patch. Patch is special to the IPQ4019 and cannot be upstreamed. LDO and SDHCI node are upstreamed, and LDO node is awaiting to be accepted. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: add kernel module for Sensirion SPS30 PMSPetr Štetiar2020-03-0810-0/+1195
| | | | | | | Adds into 4.19 backported kernel module from 5.1 for Sensirion SPS30 particulate matter sensor, for kernel 5.4 backported dependency fix. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* linux: generic: 5.4: add missing config symbolsPetr Štetiar2020-03-081-0/+11
| | | | | | Those symbols popped up while building imx6 with all targets enabled. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "kernel: rewrite run_parsers_by_type() to use add_mtd_partitions()"David Bauer2020-03-073-15/+24
| | | | | | | | | | | | | | This reverts commit 15a0701cdde8eeae2a54880b813cdb8cdc09a384. It was reported that this patch breaks on some cases the JFFS2 overlay filesystem on targets still using kernel 4.14. This includes ar71xx, where spurious erase of the ART was reported. Revert this commit for now. Re-adding should probaby also be done for every currently supported kernel version. Ref: FS#2837 FS#2862 FS#2864 Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: add missing symbol from 5.4 configAnsuel Smith2020-03-031-0/+19
| | | | | | Add missing symbol displayed with ipa806x kernel config Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: 5.4: backport fxos8700 accel support from 5.5Tim Harvey2020-03-011-0/+912
| | | | | | | | | | | | Backport kernel module from 5.5 for FXOS8700CQ, which is a small, low-power, 3-axis linear accelerometer and 3-axis magnetometer combined into a single package. The device features a selectable I2C or point-to-point SPI serial interface with 14-bit accelerometer and 16-bit magnetometer ADC resolution along with smart-embedded functions. Signed-off-by: Tim Harvey <tharvey@gateworks.com> [added commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* linux-5.4: backport ARM symbol export fixÁlvaro Fernández Rojas2020-03-011-0/+60
| | | | | | | Fixes the following warning for ARM targets: WARNING: "return_address" [vmlinux] is a static EXPORT_SYMBOL_GPL Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* linux-5.4: backport modpost upstream patchesÁlvaro Fernández Rojas2020-03-014-11/+121
| | | | | | | | | Fixes modpost Segmentation Fault with bcm2708 and bcm2709: MODPOST vmlinux.o Segmentation fault make[6]: *** [scripts/Makefile.modpost:66: __modpost] Error 139 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* treewide: move commonly disabled symbols to generic configDavid Bauer2020-03-011-0/+6
| | | | | | | Move new commonly disabled kernel 5.4 symbols to the generic kernel configuration. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: 5.4: add unconfigured symbolsChristian Lamparter2020-02-281-0/+5
| | | | | | | This patch adds a few more symbols that I found that need disabling in order to not break the automatic build. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: 4.19,5.4: disable ARM CE & NEONChristian Lamparter2020-02-282-0/+20
| | | | | | | | | | This patch disables the CRYPTO KERNEL SYMBOLs that are touched by the upcoming ipq40xx patch "ipq40xx: use neon crypto drivers" from "Eneas U de Queiroz" and more so for his follow up patches for the other ARM targets in this series. This should help to prevent at least a few potential build errors on other archs. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: 5.4 fix build on darwinKevin Darbyshire-Bryant2020-02-281-0/+27
| | | | | | | | | | | | | | | | | | Fix typedef clash on darwin. HOSTCC scripts/mod/file2alias.o scripts/mod/file2alias.c:47:3: error: typedef redefinition with different types ('struct uuid_t' vs '__darwin_uuid_t' (aka 'unsigned char [16]')) } uuid_t; ^ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/sys/_types/_uuid_t.h:31:25: note: previous definition is here typedef __darwin_uuid_t uuid_t; ^ scripts/mod/file2alias.c:1305:42: error: array initializer must be an initializer list or string literal DEF_FIELD(symval, tee_client_device_id, uuid); ^ 2 errors generated. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: Remove nvmem hack patch from 5.4Hauke Mehrtens2020-02-281-34/+0
| | | | | | | | | | | | | | The nvmem framework is now used in net/ethernet/eth.c and the nvmem sysfs is split into a separate Kconfig option. More work would be needed to adapt this patch for the broader use. The current patch compiles fine on ath79, but it breaks the x86 target. nvmem is also compiled into the kernel for most of our targets for example ath79 anyway, so patching the kernel to remove it is now harder and not the case on multiple targets anyway. Instead of making this work on kernel 5.4 just remove this hack patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Make LIB_ARC4 selectableHauke Mehrtens2020-02-281-0/+15
| | | | | | | | This makes it possible to select CONFIG_CRYPTO_LIB_ARC4 directly. We need this to be able to compile this into the kernel and make use of it from mac80211 backports. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* x86: Refresh patches on kernel 5.4Hauke Mehrtens2020-02-281-15/+0
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add support for kernel 5.4Koen Vandeputte2020-02-28215-6794/+1535
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches were removed because they are integrated in the upstream kernel 5.4: * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch * pending-5.4/220-optimize_inlining.patch * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch Some bigger changes were done to this feature and we did not port this patch yet: * hack-5.4/207-disable-modorder.patch This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes: * hack-5.4/930-crashlog.patch A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations. * pending-5.4/304-mips_disable_fpu.patch - no crashlog support yet as a required file got deleted upstream - Removed patch below, which is now seen as a recursive dependency [1] - Removed patch below due to build error [2] - fix still required to avoid identical function def [3] - Fixes included from Blocktrron - Fixes included from Chunkeey - Fix included from nbd regarding "dst leak in Flow Offload" [1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch [2] target/linux/generic/hack-5.4/207-disable-modorder.patch [3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: copy kernel 4.19 code to 5.4Hauke Mehrtens2020-02-28228-0/+38475
| | | | | | | No changes were done to the patches while coping them. Currently they do not apply on top of kernel 5.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Sort generic configurationHauke Mehrtens2020-02-242-5/+5
| | | | | | | | | | | | This was done by executing these commands: $ ./scripts/kconfig.pl '+' target/linux/generic/config-4.19 /dev/null > target/linux/generic/config-4.19-new $ mv target/linux/generic/config-4.14-new target/linux/generic/config-4.14 $ ./scripts/kconfig.pl '+' target/linux/generic/config-4.14 /dev/null > target/linux/generic/config-4.14-new $ mv target/linux/generic/config-4.19-new target/linux/generic/config-4.19 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 10:11:17 +0000