aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.177John Audia2023-04-084-4/+4
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: backport NVMEM patch for U-Boot env data "ethaddr" cellRafał Miłecki2023-04-064-2/+164
| | | | | | Adjust our local code to avoid breakage. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport NVMEM patches queued for the v6.4Rafał Miłecki2023-04-0646-0/+3960
| | | | | | | | | They add NVMEM layouts support. It allows handling NVMEM content independently of NVMEM device access. Skip U-Boot env data patch for now as it break our downstream MAC hacks. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport mtd fixes for nvmemRafał Miłecki2023-04-065-5/+197
| | | | | | They are needed for NVMEM changes pending for v6.4. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport of_request_module()Rafał Miłecki2023-04-0610-0/+1274
| | | | | | It's needed by NVMEM changes queued for 6.4. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: disable SGMII in-band AN for RealTek 2.5G PHYsDaniel Golle2023-04-031-0/+43
| | | | | | | | | | | | | MAC drivers don't use SGMII in-band autonegotiation unless told to do so in device tree using 'managed = "in-band-status"'. When using MDIO to access a PHY, in-band-status is unneeded as we have link-status via MDIO. Switch off SGMII in-band autonegotiation using magic values. Reported-by: Chen Minqiang <ptpt52@gmail.com> Reported-by: Chukun Pan <amadeus@jmu.edu.cn> Reported-by: Yevhen Kolomeiko <jarvis2709@gmail.com> Tested-by: Yevhen Kolomeiko <jarvis2709@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: use genphy_soft_reset for RealTek 2.5G PHYsDaniel Golle2023-04-031-0/+65
| | | | | | | | | Some vendor bootloaders do weird things with those PHYs which result in link modes being reported wrongly. Start from a clean sheet by resetting the PHY. Reported-by: Yevhen Kolomeiko <jarvis2709@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: interface mode switch for RTL8221B PHYChukun Pan2023-04-031-0/+61
| | | | | | | | Add dynamic interface mode update for the rtl8221 phy to match various wire speeds. 10M/100M/1000M use SGMII, 2500M uses 2500Base-X. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: add quirk for HG MXPD-483II 2500M fiber SFPDaniel Golle2023-04-032-3/+16
| | | | | | | | | | | | | | | | | | | The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X, however, in their EEPROM they incorrectly specify: Transceiver type : Ethernet: 1000BASE-LX ... BR, Nominal : 2600MBd Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway. https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60 X-Patchwork-Id: 13197378 X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org Reported-by: chowtom <chowtom@gmail.com> Tested-by: chowtom <chowtom@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport upstreamed DSA B53 MMAP patchÁlvaro Fernández Rojas2023-04-014-121/+52
| | | | | | | Move the patch from pending to backport, since it has been accepted upstream: https://github.com/torvalds/linux/commit/45977e58ce65ed0459edc9a0466d9dfea09463f5 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 5.15 to 5.15.105John Audia2023-04-0120-178/+83
| | | | | | | | | | | | | | | | | | | Manually rebased: Removed upstreamed: backport-5.15/743-v6.3-0005-net-dsa-b53-mmap-fix-device-tree-support.patch[1] backport-5.15/743-v6.3-0006-net-dsa-tag_brcm-legacy-fix-daisy-chained-switches.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.105&id=9bbb3d3f218f1cf51f57a43cf8fd63b05be1b821 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.105&id=48f52431af9980582b6faa32ff8b581edb10486c Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: add support for XMC XM25QH64CJoe Mullally2023-04-012-0/+44
| | | | | | | The XMC XM25QH64C is a 8MB SPI NOR chip. The patch is verified on TL-WPA8631P v3. Datasheet available at https://www.xmcwh.com/uploads/442/XM25QH64C.pdf Signed-off-by: Joe Mullally <jwmullally@gmail.com>
* kernel: fix mtk_eth_soc flow accounting for MT7986Felix Fietkau2023-04-011-0/+8
| | | | | | This was accidentally dropped when MT7981 support was added Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove obsolete netfilter tcp window size check bypass patchFelix Fietkau2023-03-302-156/+0
| | | | | | | On any currently supported hardware, the performance impact should not matter anymore. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: filter out pahole versionRobert Marko2023-03-291-0/+1
| | | | | | | | Pahole version is being autodetected during runtime since kernel 5.15.96 via in-kernel scripts/pahole-version.sh so add CONFIG_PAHOLE_VERSION to kernel filter in order to prevent it from being added to target configs. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: fix mtk_eth_soc throughput regressions on gigabit PHY portsFelix Fietkau2023-03-299-26/+99
| | | | | | Fixes issues on MT7621 and MT7623 switch ports, and PHY ports on all SoC Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove unnecessary change from backlog threading fixFelix Fietkau2023-03-281-19/+9
| | | | | Fixes: f1c9bd6f6f41 ("kernel: fix kernel warning and network issue in the backlog threading patch") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix kernel warning and network issue in the backlog threading patchFelix Fietkau2023-03-281-8/+26
| | | | | | Fixes enabling it early during the boot Signed-off-by: Felix Fietkau <nbd@nbd.name>
* generic: fix Macronix SPI-NAND driverDaniel Golle2023-03-271-0/+35
| | | | | | | | | Use scratch buffer for DMA operetations. Passing a pointer to a stack variable won't work and results in bogus bit flips being reported. Patch was submitted upstream and is part of Linux 6.3. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: dsa: make use of pcs-mtk-lynxi also for mt7530Daniel Golle2023-03-271-0/+514
| | | | | | | | The MT7531 switch IC comes with SerDes ports with PCS identical to what is also used in MediaTek's SoCs. Make use of the shared driver to ease maintainance and reduce code duplication. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: backport regmap reg_base and downshift featuresDaniel Golle2023-03-274-1/+243
| | | | | | | Backport new regmap features from Linux 5.18 which are needed to let mt7530 use pcs-mtk-lynxi. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: mtk_eth_soc: switch to external PCS driverDaniel Golle2023-03-276-20/+532
| | | | | | Backport patch to make use of the new PCS driver in mtk_eth_soc. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: pcs-mtk-lynxi: add hack to use 2500Base-X without ANDaniel Golle2023-03-271-0/+40
| | | | | | | | | | Using 2500Base-T SFP modules e.g. on the BananaPi R3 requires manually disabling auto-negotiation, e.g. using ethtool. While a proper fix using SFP quirks is being discussed upstream, bring a work-around to restore user experience to what it was before the switch to the dedicated SGMII PCS driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: net: pcs: add driver for MediaTek SGMII PCSDaniel Golle2023-03-273-2/+396
| | | | | | Backport dedicated PCS driver for MediaTek LynxI SGMII/SerDes unit. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: mtk_eth_soc: allow setting MDIO clock frequencyDaniel Golle2023-03-277-21/+97
| | | | | | | | Backport patch allowing to set the MDIO bus clock frequency. By default the MDIO bus clock runs on 2.5 MHz, allow increasing it up to 25 MHz. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: backport support for MT7981 EthernetDaniel Golle2023-03-272-1/+184
| | | | | | Backport support for the MT7981 SoC to mtk_eth_soc. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: replace mtk_sgmii patches with versions accepted upstreamDaniel Golle2023-03-2721-223/+875
| | | | | | | | | Replace patches for MediaTek Ethernet driver SGMII/SerDes unit with their corresponding upstream patches. Not all of the patches in our tree went upstream as-is, some are slightly different implementations, and they require the phylink_pcs helpers now made available. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: backport some phylink helper functionsDaniel Golle2023-03-271-0/+150
| | | | | | | | | | | | | | It isn't feasible to literally backport all upstream phylink_pcs changes down to Linux 5.15: It's just too many patches, and many downstream drivers and hacks are likely to break. We are too close to branching off to risk this, and it's also just too much work. Instead just add helper functions used by modern PCS drivers while keeping the original functions instact as well. While this may add a kilobyte or two of extra kernel size, it has the advantage that we get the best of both worlds: None of the existing codepaths are touched, but yet we have the option to backport singular improvements to Ethernet drivers where needed. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* generic: 5.15: refresh kernel patchesChristian Marangi2023-03-2730-553/+261
| | | | | | | Refresh kernel patches for generic kernel 5.15 due to new backport version of MGLRU patchset. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: Update MGLRU patchsetKazuki H2023-03-2737-4805/+9996
| | | | | | | | The current patches are old, update them from mainline. Backports taken from https://github.com/yuzhaogoogle/linux/commits/mglru-5.15 Tested-by: Kazuki H <kazukih0205@gmail.com> #mt7622/Linksys E8450 UBI Signed-off-by: Kazuki H <kazukih0205@gmail.com>
* kernel: bump 5.10 to 5.10.176John Audia2023-03-2517-33/+33
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.104John Audia2023-03-256-12/+12
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.15 to 5.15.103John Audia2023-03-25107-1298/+702
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: backport-5.15/704-15-v5.19-net-mtk_eth_soc-move-MAC_MCR-setting-to-mac_finish.patch Removed upstreamed: backport-5.15/060-v6.0-01-tools-build-Add-feature-test-for-init_disassemble_in.patch[1] backport-5.15/060-v6.0-02-tools-include-add-dis-asm-compat.h-to-handle-version.patch[2] backport-5.15/060-v6.0-03-tools-perf-Fix-compilation-error-with-new-binutils.patch[3] backport-5.15/060-v6.0-04-tools-bpf_jit_disasm-Fix-compilation-error-with-new-.patch[4] backport-5.15/060-v6.0-05-tools-bpftool-Fix-compilation-error-with-new-binutil.patch[5] pending-5.15/733-02-net-ethernet-mtk_eth_soc-fix-RX-data-corruption-issu.patch[6] bcm47xx/patches-5.15/170-bgmac-fix-initial-chip-reset-to-support-BCM5358.patch[7] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=51b99dc38c1a053e2e732d7f9e2740e343ae7eae 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=451c9d7b16169645ed291ebb2ca9844caa088f2d 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=97f005c0bdbaf656a7808586d234965385a06c58 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=1c27fab243333821375e4d63128d60093fdbe149 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=4441a90091931fd81607567961dc122f24f735bb 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=2adc29350a5b4669544566f71f208d2abaec60ab 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.103&id=04bfc5bcdfc0fdb73587487c71b04d63807ae15a Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: fix mtk flow offload list corruption issue with l2 flowsFelix Fietkau2023-03-254-31/+48
| | | | | | | The same node was accidentally used for two different lists, causing an invalid pointer chain. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: refresh mxl-gpy LED patchÁlvaro Fernández Rojas2023-03-251-6/+1
| | | | | | | Make the patches apply cleanly again. Fixes: 90691f450543 ("generic: mxl-gpy: allow configuring LED registers") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: backport dsa b53 patchesÁlvaro Fernández Rojas2023-03-254-244/+95
| | | | | | These patches have been merged upstream, so let's move them to backport. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* generic: mxl-gpy: allow configuring LED registersDavid Bauer2023-03-241-0/+106
| | | | | | | | | | | | | Add a patch to allow modification of the PHY LED configuration. This is required for boards, where the reset configuration of LED functions is incompatibe with the usage of the device LEDs. This is the case for the ASUS TUF-AX4200 Wireless router. It requires modification of the LED configuration because as the WAN LED on the front of the device is driven by the PHY. Without patching, it would only illuminate in case the Link speed is 100 Mbit/s. Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: backport Winbond W25N02KV SPI-NAND supportDavid Bauer2023-03-242-0/+146
| | | | | | | | This flash-chip is used on the Asus TUF-AX4200 and TUF-AX6000 routers. As the filogic target only uses kernel 5.15, skip the 5.10 backport. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: add support for threaded network backlog processingFelix Fietkau2023-03-242-5/+229
| | | | | | | | This can improve load balancing by pushing backlog (and RPS) processing to separate threads, allowing the scheduler to distribute the load. It can be enabled with: echo 1 > /proc/sys/net/core/backlog_threaded Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add more dsa b53 pending patchesÁlvaro Fernández Rojas2023-03-242-0/+307
| | | | | | | | | | | | | | | | | These patches have now received a positive review upstream, so let's add them to pending patches. 776-net-dsa-b53-mmap-add-phy-ops.patch: This is mostly bmips/bcm63xx-specific to get external switches working without hanging the device when accessing certain registers. 777-net-dsa-b53-mdio-add-support-for-BCM53134: This adds support for BCM53134 switch on DSA B53, so any target using DSA B53 can benefit from it. Also fix sercomm-h500-s external switch IMP port phy-mode. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: enable conntrack counter updates for iptables xt_FLOWOFFLOADFelix Fietkau2023-03-241-2/+3
| | | | | | Ensures that packet/byte counters in /proc/net/nf_conntrack are updated Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix mediatek ppe flow accounting for mt7622 and olderFelix Fietkau2023-03-241-0/+51
| | | | | | v1 hardware uses a different enable bit for hardware counters Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: report mediatek ppe flow stats incrementallyFelix Fietkau2023-03-241-29/+42
| | | | | | | Fixes wrong counter values in conntrack stats Fixes: aa2777145f8d ("kernel: improve mtk ppe flow accounting") Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: improve mtk ppe flow accountingFelix Fietkau2023-03-233-0/+655
| | | | | | Properly track L2 flows, and ensure that stale data gets cleared Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: add kernel code for supporting offloading wlan->eth and wlan->wlan ↵Felix Fietkau2023-03-233-6/+322
| | | | | | | | flows Will be enabled by an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update mtk ppe flow accounting patch to the latest versionFelix Fietkau2023-03-233-39/+50
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update flow offload fix based on upstream suggestionsFelix Fietkau2023-03-231-34/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix DSA B53 BCM63xx RGMII patchÁlvaro Fernández Rojas2023-03-231-1/+1
| | | | | | | | | | Refreshing the patches for fff07085fb5a moved the b53_adjust_63xx_rgmii() call from b53_phylink_mac_link_up() to b53_phylink_mac_link_down(). In order to properly configure the RGMII ports we need to restore it to its correct place. Fixes: fff07085fb5a ("kernel: add pending bmips patches") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: add pending patches for bcm63268-timer-clocksÁlvaro Fernández Rojas2023-03-224-0/+671
| | | | | | | | | bcm63268-timer-clocks have been sent upstream with a positive review, so let's add them to pending v5.15. Also add devm_clk_hw_register_gate() patch from v5.17 to backports since it's needed for upstream bcm63268-timer-clocks patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update pending b53 mmap patchesÁlvaro Fernández Rojas2023-03-214-206/+244
| | | | | | | | Update B53 MMAP pending patches to the latest version sent upstream. Fixes regression in bmips BCM63268 switches. Fixes: fff07085fb5a ("kernel: add pending bmips patches") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 21:12:34 +0000