aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic
Commit message (Collapse)AuthorAgeFilesLines
...
* kernel: add (disabled) ASYMMETRIC_TPM_KEY_SUBTYPE symbolChristian Lamparter2022-03-271-0/+1
| | | | | | | | | | | | | | | at91/sama7 fails to build due to: | Asymmetric (public-key cryptographic) key type (ASYMMETRIC_KEY_TYPE) [Y/?] y | Asymmetric public-key crypto algorithm subtype (ASYMMETRIC_PUBLIC_KEY_SUBTYPE) [Y/?] y | Asymmetric TPM backed private key subtype (ASYMMETRIC_TPM_KEY_SUBTYPE) [N/m/?] (NEW) |Error in reading or end of file. please note that asym_tpm (module) has been removed in 5.17: <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d3cff4a9> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit 638771509383cf36617c49b9cc1e0c4a9aedaa0d)
* kernel: backport two intel igc patches from 5.15Pascal Coudurier2022-03-262-0/+116
| | | | | | | | | | | | to allow proper initialization of device - igc: Remove _I_PHY_ID checking - igc: Remove phy->type checking Signed-off-by: Pascal Coudurier <coudu@wanadoo.fr> (refreshed) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit dd45cc2123b75abb0b41eb90c21d8d3506f2a3c2)
* kernel: Fix patch headerMarek Behún2022-03-241-1/+1
| | | | | | | | | | | Remove "a" character from the first line of patch 738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch Otherwise `git am` fails to apply this patch which is annoying when trying to do some development / rebasing. Signed-off-by: Marek Behún <kabel@kernel.org> (cherry picked from commit f811c33b197138d8e9ab7bc9fbdc3836e95827b8)
* kernel: delete Linux 5.4 config and patchesDaniel Golle2022-03-21463-119615/+0
| | | | | | | | | As the upcoming release will be based on Linux 5.10 only, remove all kernel configuration as well as patches for Linux 5.4. There were no targets still actively using Linux 5.4. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606)
* kernel: bump 5.10 to 5.10.107John Audia2022-03-193-3/+3
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.106John Audia2022-03-193-15/+5
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.105John Audia2022-03-192-15/+18
| | | | | | | | | | | | | | | Updated default config with new sym (CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y). Manually rebased: generic/hack-5.10/220-arm-gc_sections.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: enable SERIAL_8250_16550A_VARIANTSStijn Tintel2022-03-181-1/+1
| | | | | | | | | | | | | | | | | | | Kernel 5.6 introduced a new config symbol SERIAL_8250_16550A_VARIANTS. In kernel 5.8, this symbol was changed to default to on on !x86, as some embedded devices still use 16650A variants. Let's play safe here and enable this symbol in the generic config, to avoid others from running into this problem and having to spend several hours trying to bisect this problem. While we could disable the symbol in the x86 target configs, a 20ms boot time reduction really isn't worth the time wasted on bisecting this issue. Matt discovered this problem while working on adding support for the WatchGuard Firebox M200 to the qoriq target, where it caused some characters to be missing on the console output. Reported-by: Matt Fawcett <mattytap@icloud.com> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: include CONFIG_KEXEC_SIG in configsPhilip Prindeville2022-03-152-0/+2
| | | | | | | | | | | | | | Seeing failure to build because of missing symbols related to provisioning CONFIG_KEXEC and signed images. Without this, if you set CONFIG_KERNEL_KEXEC=y and try to build, target/linux will hang at: scripts/kconfig/conf --syncconfig Kconfig ... kexec system call (KEXEC) [Y/n/?] y kexec file based system call (KEXEC_FILE) [Y/n/?] y Verify kernel signature during kexec_file_load() syscall (KEXEC_SIG) [N/y/?] (NEW) Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: backport DSA patches fixing null-pointer dereference for 5.10Marek Behún2022-03-152-0/+151
| | | | | | | | | Backport patches 381a730182f1 ("net: dsa: Move VLAN filtering syncing out of dsa_switch_bridge_leave") 108dc8741c20 ("net: dsa: Avoid cross-chip syncing of VLAN filtering") from upstream (currently in net-next) to fix null-pointer dereference. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: wwan: add MeigLink SLM750 modem supportDaniel Golle2022-03-101-0/+33
| | | | | | | | | | Add patch found in Teltonika RUT9_R_00.07.01.4 GPL SDK download[1] adding USB IDs of the MeigLink SLM750 to the relevant kernel drivers. Newer versions of Teltonika's 2G/3G/4G RUT9XX WWAN router series come with this kind of modem. [1]: https://wiki.teltonika-networks.com/view/GPL Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport patch to allow using parser_trx from ramipsINAGAKI Hiroshi2022-03-061-0/+33
| | | | | | | This patch adds a patch to allow using parser_trx from ramips target, mainly for Buffalo devices. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: move parser_trx patches of custom magic to genericINAGAKI Hiroshi2022-03-065-1/+109
| | | | | | | | This patch moves the patches of parser_trx in mediatek target to generic/backport-5.10 to use the changes from ramips target and backport the additional patch of the parser. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: add support for XMC XM25QH128CLanghua Ye2022-03-051-0/+11
| | | | | | | The XMC XM25QH128C is a 16MB SPI NOR chip. The patch is verified on Ruijie RG-EW3200GX PRO. Datasheet available at https://www.xmcwh.com/uploads/435/XM25QH128C.pdf Signed-off-by: Langhua Ye <y1248289414@outlook.com>
* kernel: bump 5.10 to 5.10.103Rui Salvaterra2022-03-052-3/+3
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.102John Audia2022-03-014-20/+10
| | | | | | | | | | | | | | | Removed upstreamed: bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.102&id=f333c1916fd6b55900029bf8f918cc00009e2111 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-014-74/+17
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: move CONFIG_ASN1 to generic configJohn Audia2022-02-281-0/+1
| | | | | | | Rather than populating this symbol in the individual configs, move it to the generic config. Signed-off-by: John Audia <graysky@archlinux.us>
* mpc85xx: HiveAP-330: add tmp125 temperature sensorChristian Lamparter2022-02-251-0/+71
| | | | | | | | | | | the Aerohive HiveAP-330 and HiveAP-350 come equipped with an TI TMP125 temperature chip. This patch wires up the necessary support for this sensor and exposes it through hwmon / thermal sensor framework. Upstream support is coming, but it has to go through hwmon-next first. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add disabled PSTORE+REED_SOLOMON symbols for 5.4Christian Lamparter2022-02-251-0/+15
| | | | | | | | | The last remaining 5.4 target currently chokes because the symbols haven't been disabled like for 5.10. Fixes: 97158fe10e60 ("kernel: package ramoops pstore-ram crash log storage") Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: generic: add missing 5.10 symbolsRui Salvaterra2022-02-251-3/+6
| | | | | | | | | | | | | | | Add the following kconfig symbols (disabled): CONFIG_DEFAULT_FQ CONFIG_DEFAULT_CODEL CONFIG_DEFAULT_SFQ Also resort the config with the kconfig.pl script. Fixes: f39872d966 ("kernel: generic: select the fq_codel qdisc by default") Tested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: package ramoops pstore-ram crash log storageHannu Nyman2022-02-241-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Package the ability to log kernel crashes to 'ramoops' pstore files into RAM in /sys/fs/pstore Reference to the ramoops admin guide in upstream Linux: https://www.kernel.org/doc/html/v5.10/admin-guide/ramoops.html The files in RAM survive a warm reboot, but not a cold reboot. Note: kmod-ramoops selects kmod-pstore and kmod-reed-solomon. The feature can be used by selecting the kmod-ramoops and adding a ramoops reserved-memory definition to the device DTS. Example from R7800: reserved-memory { rsvd@5fe00000 { reg = <0x5fe00000 0x200000>; reusable; }; ramoops@42100000 { compatible = "ramoops"; reg = <0x42100000 0x40000>; record-size = <0x4000>; console-size = <0x4000>; ftrace-size = <0x4000>; pmsg-size = <0x4000>; }; }; If no definition has been made in DTS, no crash log is stored for the device. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (added CONFIG_EFI_VARS_PSTORE disable)
* linux/modules: split up oid_registryRosen Penev2022-02-191-0/+1
| | | | | | This will be needed by ksmbd in a following commit. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* target/linux: add help text to kernel configRosen Penev2022-02-191-0/+22
| | | | | | | These options will be used for ksmbd. Once kernel 5.15 makes it in, this patch can go away. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* net: ethernet: mtk_eth_soc: add ipv6 flow offload supportDavid Bentham2022-02-191-0/+65
| | | | | | | | | | Add the missing IPv6 flow offloading support for routing only. Hardware flow offloading is done by the packet processing engine (PPE) of the Ethernet MAC and as it doesn't support mangling of IPv6 packets, IPv6 NAT cannot be supported. Signed-off-by: David Bentham <db260179@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: 5.10: backport gpio-cascade and related symbolsMauri Sandberg2022-02-192-0/+238
| | | | | | | | The patch is under review at [1]. Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> [1] http://patchwork.ozlabs.org/project/linux-gpio/patch/20211026191506.3099-3-maukka@ext.kapsi.fi/
* kernel: backport fix for initializing skb->cb in the bridge code to 5.4Felix Fietkau2022-02-162-2/+30
| | | | | | Fixes issues with proxyarp Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix a race condition leading to a crash in hw flow offloadingFelix Fietkau2022-02-141-5/+6
| | | | | | | flowtable->net was initialized too late, and this could be triggered even without hardware offload support on the device Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix copy&paste mistake in bridge offload codeFelix Fietkau2022-02-141-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove 640-bridge-only-accept-EAP-locally.patchFelix Fietkau2022-02-122-164/+0
| | | | | | | The issue of EAP frames sent to group address (or the wrong address) has been addressed in mac80211, so this hack is no longer needed Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add a fast path for the bridge codeFelix Fietkau2022-02-122-4/+821
| | | | | | | | | This caches flows between MAC addresses on separate ports, including their VLAN in order to bypass the normal bridge forwarding code. In my test on MT7622, this reduces LAN->WLAN bridging CPU usage by 6-10%, potentially even more on weaker platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 5.10 to 5.10.99John Audia2022-02-112-52/+1
| | | | | | | | | | | | | | | | | | | | Had to update generic defconfig (make kernel_menuconfig CONFIG_TARGET=generic) for this bump, but since that only modifies the target defined in .config, and since that target also needed to be updated for unrelated reasons, manually propagated the newly added symbol to the generic config. Removed upstreamed: pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.99&id=080f371d984e8039c66db87f3c54804b0d172329 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.98John Audia2022-02-114-21/+11
| | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* target/linux: add missing symbolRosen Penev2022-02-111-0/+1
| | | | | | Found when building the qoriq target. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: backport MT7530 IRQ supportDENG Qingfang2022-02-101-0/+425
| | | | | | | | | | | Support MT7530 PHY link change interrupts, and enable for MT7621. For external MT7530, a GPIO IRQ line is required, which is board-specific, so it should be added to each DTS. In case the interrupt-controller property is missing, it will fall back to polling mode. Signed-off-by: DENG Qingfang <dqfext@gmail.com>
* kernel: backport MediaTek Ethernet PHY driverDENG Qingfang2022-02-092-0/+160
| | | | | | | | | | | | | | Add support for MediaTek Gigabit Ethernet PHYs found in MT7530 and MT7531. Fix some link up/down issues. The errornous check for the PHY mode which broke things with MT7531 has been removed as suggested by patch net: phy: mediatek: remove PHY mode check on MT7531 As a result, things are working fine now on MT7622+MT7531 as well. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: generic: select the fq_codel qdisc by defaultRui Salvaterra2022-02-092-101/+4
| | | | | | | | | The kernel configuration allows us to select a default qdisc. Let's do this for 5.10 (as 5.4 is on its way out) and get rid of the hacky patch we've been carrying. Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* Revert "kernel: backport MediaTek Ethernet PHY driver"Hauke Mehrtens2022-02-052-163/+0
| | | | | | | | | | | | | | | | | | This reverts commit 8b4cba53a9402f44da2dced4a78ca065b15dca94. This broke the mt7530 on Linksys e8450 (mt7622) for me. [ 1.312943] mt7530 mdio-bus:00 lan1 (uninitialized): failed to connect to PHY: -EINVAL [ 1.320890] mt7530 mdio-bus:00 lan1 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 0 [ 1.331163] mt7530 mdio-bus:00 lan2 (uninitialized): failed to connect to PHY: -EINVAL [ 1.339085] mt7530 mdio-bus:00 lan2 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 1 [ 1.349321] mt7530 mdio-bus:00 lan3 (uninitialized): failed to connect to PHY: -EINVAL [ 1.357241] mt7530 mdio-bus:00 lan3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 2 [ 1.367452] mt7530 mdio-bus:00 lan4 (uninitialized): failed to connect to PHY: -EINVAL [ 1.375367] mt7530 mdio-bus:00 lan4 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 3 [ 1.385750] mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL [ 1.393575] mt7530 mdio-bus:00 wan (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "kernel: backport MT7530 IRQ support"Hauke Mehrtens2022-02-051-428/+0
| | | | | | | | | This reverts commit 3f4301e123f29348b4ad87578d62b7d1f5f210c6. This broke the mt7530 on Linksys e8450 (mt7622) for me. [ 1.300554] mt7530 mdio-bus:00: no interrupt support Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport MT7530 IRQ supportDENG Qingfang2022-02-051-0/+428
| | | | | | | | Support MT7530 PHY link change interrupts, and enable for MT7621. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MediaTek Ethernet PHY driverDENG Qingfang2022-02-052-0/+163
| | | | | | | | | Add support for MediaTek Gigabit Ethernet PHYs found in MT7530. Fix some link up/down issues. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 MDB operationsDENG Qingfang2022-02-051-0/+171
| | | | | | | | | Use hardware to forward multicast traffic instead of trapping to the host. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 VLAN fixDENG Qingfang2022-02-055-0/+523
| | | | | | | | Fix FDB learning bugs when VLAN filtering is enabled. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 ageing time supportDENG Qingfang2022-02-051-0/+99
| | | | | | | | Allow setting ageing time from 1 to 1,048,576 seconds. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MediaTek jumbo frame supportDENG Qingfang2022-02-053-0/+286
| | | | | | | | Allow MTU up to 2026 on mediatek, ramips/mt7621 targets. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* ath79: kernel: drop _machine_restart againLech Perczak2022-02-051-0/+54
| | | | | | | | | | Backport patch ("MIPS: ath79: drop _machine_restart again"), which is required to support GPIO restart handler on ZTE MF286, broken due to _machine_restart being restored in kernel accidentally, wich causes any registered restart handlers to not execute, including one from ath79-reset driver. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* generic: kernel: add patches with ZTE MF286D modemPawel Dembicki2022-02-052-0/+121
| | | | | | | | | | | This patch includes patches sent upstream with ZTE MF286D modem support. It adds support for qmi and serial option driver. Links to ML: https://lore.kernel.org/linux-usb/20220111221132.14586-1-paweldembicki@gmail.com/ https://lore.kernel.org/linux-usb/20220111221205.14662-1-paweldembicki@gmail.com/ Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: bump 5.10 to 5.10.96Rui Salvaterra2022-02-014-13/+13
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-0144-90/+142
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add disabled POWER_RESET_QNAPSungbo Eo2022-01-292-0/+2
| | | | | | Move the disabled symbol from target configs to generic configs. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-23 02:40:39 +0000