aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic
Commit message (Collapse)AuthorAgeFilesLines
* kernel: add support for XMC XM25QH128CLanghua Ye2022-03-051-0/+11
| | | | | | | The XMC XM25QH128C is a 16MB SPI NOR chip. The patch is verified on Ruijie RG-EW3200GX PRO. Datasheet available at https://www.xmcwh.com/uploads/435/XM25QH128C.pdf Signed-off-by: Langhua Ye <y1248289414@outlook.com>
* kernel: bump 5.10 to 5.10.103Rui Salvaterra2022-03-052-3/+3
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.102John Audia2022-03-014-20/+10
| | | | | | | | | | | | | | | Removed upstreamed: bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.102&id=f333c1916fd6b55900029bf8f918cc00009e2111 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-014-74/+17
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: move CONFIG_ASN1 to generic configJohn Audia2022-02-281-0/+1
| | | | | | | Rather than populating this symbol in the individual configs, move it to the generic config. Signed-off-by: John Audia <graysky@archlinux.us>
* mpc85xx: HiveAP-330: add tmp125 temperature sensorChristian Lamparter2022-02-251-0/+71
| | | | | | | | | | | the Aerohive HiveAP-330 and HiveAP-350 come equipped with an TI TMP125 temperature chip. This patch wires up the necessary support for this sensor and exposes it through hwmon / thermal sensor framework. Upstream support is coming, but it has to go through hwmon-next first. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add disabled PSTORE+REED_SOLOMON symbols for 5.4Christian Lamparter2022-02-251-0/+15
| | | | | | | | | The last remaining 5.4 target currently chokes because the symbols haven't been disabled like for 5.10. Fixes: 97158fe10e60 ("kernel: package ramoops pstore-ram crash log storage") Reported-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: generic: add missing 5.10 symbolsRui Salvaterra2022-02-251-3/+6
| | | | | | | | | | | | | | | Add the following kconfig symbols (disabled): CONFIG_DEFAULT_FQ CONFIG_DEFAULT_CODEL CONFIG_DEFAULT_SFQ Also resort the config with the kconfig.pl script. Fixes: f39872d966 ("kernel: generic: select the fq_codel qdisc by default") Tested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: package ramoops pstore-ram crash log storageHannu Nyman2022-02-241-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Package the ability to log kernel crashes to 'ramoops' pstore files into RAM in /sys/fs/pstore Reference to the ramoops admin guide in upstream Linux: https://www.kernel.org/doc/html/v5.10/admin-guide/ramoops.html The files in RAM survive a warm reboot, but not a cold reboot. Note: kmod-ramoops selects kmod-pstore and kmod-reed-solomon. The feature can be used by selecting the kmod-ramoops and adding a ramoops reserved-memory definition to the device DTS. Example from R7800: reserved-memory { rsvd@5fe00000 { reg = <0x5fe00000 0x200000>; reusable; }; ramoops@42100000 { compatible = "ramoops"; reg = <0x42100000 0x40000>; record-size = <0x4000>; console-size = <0x4000>; ftrace-size = <0x4000>; pmsg-size = <0x4000>; }; }; If no definition has been made in DTS, no crash log is stored for the device. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (added CONFIG_EFI_VARS_PSTORE disable)
* linux/modules: split up oid_registryRosen Penev2022-02-191-0/+1
| | | | | | This will be needed by ksmbd in a following commit. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* target/linux: add help text to kernel configRosen Penev2022-02-191-0/+22
| | | | | | | These options will be used for ksmbd. Once kernel 5.15 makes it in, this patch can go away. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* net: ethernet: mtk_eth_soc: add ipv6 flow offload supportDavid Bentham2022-02-191-0/+65
| | | | | | | | | | Add the missing IPv6 flow offloading support for routing only. Hardware flow offloading is done by the packet processing engine (PPE) of the Ethernet MAC and as it doesn't support mangling of IPv6 packets, IPv6 NAT cannot be supported. Signed-off-by: David Bentham <db260179@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: 5.10: backport gpio-cascade and related symbolsMauri Sandberg2022-02-192-0/+238
| | | | | | | | The patch is under review at [1]. Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> [1] http://patchwork.ozlabs.org/project/linux-gpio/patch/20211026191506.3099-3-maukka@ext.kapsi.fi/
* kernel: backport fix for initializing skb->cb in the bridge code to 5.4Felix Fietkau2022-02-162-2/+30
| | | | | | Fixes issues with proxyarp Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix a race condition leading to a crash in hw flow offloadingFelix Fietkau2022-02-141-5/+6
| | | | | | | flowtable->net was initialized too late, and this could be triggered even without hardware offload support on the device Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix copy&paste mistake in bridge offload codeFelix Fietkau2022-02-141-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove 640-bridge-only-accept-EAP-locally.patchFelix Fietkau2022-02-122-164/+0
| | | | | | | The issue of EAP frames sent to group address (or the wrong address) has been addressed in mac80211, so this hack is no longer needed Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add a fast path for the bridge codeFelix Fietkau2022-02-122-4/+821
| | | | | | | | | This caches flows between MAC addresses on separate ports, including their VLAN in order to bypass the normal bridge forwarding code. In my test on MT7622, this reduces LAN->WLAN bridging CPU usage by 6-10%, potentially even more on weaker platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 5.10 to 5.10.99John Audia2022-02-112-52/+1
| | | | | | | | | | | | | | | | | | | | Had to update generic defconfig (make kernel_menuconfig CONFIG_TARGET=generic) for this bump, but since that only modifies the target defined in .config, and since that target also needed to be updated for unrelated reasons, manually propagated the newly added symbol to the generic config. Removed upstreamed: pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.99&id=080f371d984e8039c66db87f3c54804b0d172329 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.98John Audia2022-02-114-21/+11
| | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* target/linux: add missing symbolRosen Penev2022-02-111-0/+1
| | | | | | Found when building the qoriq target. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: backport MT7530 IRQ supportDENG Qingfang2022-02-101-0/+425
| | | | | | | | | | | Support MT7530 PHY link change interrupts, and enable for MT7621. For external MT7530, a GPIO IRQ line is required, which is board-specific, so it should be added to each DTS. In case the interrupt-controller property is missing, it will fall back to polling mode. Signed-off-by: DENG Qingfang <dqfext@gmail.com>
* kernel: backport MediaTek Ethernet PHY driverDENG Qingfang2022-02-092-0/+160
| | | | | | | | | | | | | | Add support for MediaTek Gigabit Ethernet PHYs found in MT7530 and MT7531. Fix some link up/down issues. The errornous check for the PHY mode which broke things with MT7531 has been removed as suggested by patch net: phy: mediatek: remove PHY mode check on MT7531 As a result, things are working fine now on MT7622+MT7531 as well. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: generic: select the fq_codel qdisc by defaultRui Salvaterra2022-02-092-101/+4
| | | | | | | | | The kernel configuration allows us to select a default qdisc. Let's do this for 5.10 (as 5.4 is on its way out) and get rid of the hacky patch we've been carrying. Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* Revert "kernel: backport MediaTek Ethernet PHY driver"Hauke Mehrtens2022-02-052-163/+0
| | | | | | | | | | | | | | | | | | This reverts commit 8b4cba53a9402f44da2dced4a78ca065b15dca94. This broke the mt7530 on Linksys e8450 (mt7622) for me. [ 1.312943] mt7530 mdio-bus:00 lan1 (uninitialized): failed to connect to PHY: -EINVAL [ 1.320890] mt7530 mdio-bus:00 lan1 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 0 [ 1.331163] mt7530 mdio-bus:00 lan2 (uninitialized): failed to connect to PHY: -EINVAL [ 1.339085] mt7530 mdio-bus:00 lan2 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 1 [ 1.349321] mt7530 mdio-bus:00 lan3 (uninitialized): failed to connect to PHY: -EINVAL [ 1.357241] mt7530 mdio-bus:00 lan3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 2 [ 1.367452] mt7530 mdio-bus:00 lan4 (uninitialized): failed to connect to PHY: -EINVAL [ 1.375367] mt7530 mdio-bus:00 lan4 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 3 [ 1.385750] mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL [ 1.393575] mt7530 mdio-bus:00 wan (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "kernel: backport MT7530 IRQ support"Hauke Mehrtens2022-02-051-428/+0
| | | | | | | | | This reverts commit 3f4301e123f29348b4ad87578d62b7d1f5f210c6. This broke the mt7530 on Linksys e8450 (mt7622) for me. [ 1.300554] mt7530 mdio-bus:00: no interrupt support Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport MT7530 IRQ supportDENG Qingfang2022-02-051-0/+428
| | | | | | | | Support MT7530 PHY link change interrupts, and enable for MT7621. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MediaTek Ethernet PHY driverDENG Qingfang2022-02-052-0/+163
| | | | | | | | | Add support for MediaTek Gigabit Ethernet PHYs found in MT7530. Fix some link up/down issues. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 MDB operationsDENG Qingfang2022-02-051-0/+171
| | | | | | | | | Use hardware to forward multicast traffic instead of trapping to the host. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 VLAN fixDENG Qingfang2022-02-055-0/+523
| | | | | | | | Fix FDB learning bugs when VLAN filtering is enabled. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 ageing time supportDENG Qingfang2022-02-051-0/+99
| | | | | | | | Allow setting ageing time from 1 to 1,048,576 seconds. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MediaTek jumbo frame supportDENG Qingfang2022-02-053-0/+286
| | | | | | | | Allow MTU up to 2026 on mediatek, ramips/mt7621 targets. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* ath79: kernel: drop _machine_restart againLech Perczak2022-02-051-0/+54
| | | | | | | | | | Backport patch ("MIPS: ath79: drop _machine_restart again"), which is required to support GPIO restart handler on ZTE MF286, broken due to _machine_restart being restored in kernel accidentally, wich causes any registered restart handlers to not execute, including one from ath79-reset driver. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* generic: kernel: add patches with ZTE MF286D modemPawel Dembicki2022-02-052-0/+121
| | | | | | | | | | | This patch includes patches sent upstream with ZTE MF286D modem support. It adds support for qmi and serial option driver. Links to ML: https://lore.kernel.org/linux-usb/20220111221132.14586-1-paweldembicki@gmail.com/ https://lore.kernel.org/linux-usb/20220111221205.14662-1-paweldembicki@gmail.com/ Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: bump 5.10 to 5.10.96Rui Salvaterra2022-02-014-13/+13
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-0144-90/+142
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: add disabled POWER_RESET_QNAPSungbo Eo2022-01-292-0/+2
| | | | | | Move the disabled symbol from target configs to generic configs. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: move bootargs-append patch to genericSungbo Eo2022-01-292-0/+24
| | | | | | | | | | This moves bootargs-append support patch from ipq40xx and ipq806x to generic. This way we can append additional boot arguments from DTS instead of only being able to overwrite them. This is a preparation for kirkwood support of ipTIME NAS1. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: bump 5.4 to 5.4.174John Audia2022-01-284-7/+7
| | | | | | | | | | | | | | Removed upstreamed patches: layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.4.174&id=65816c1034769e714edb70f59a33bc5472d9e55f Build system: x86_64 Build-tested: ramips/mt7621 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: Add CONFIG_CRYPTO_DEV_OCTEONTX_CPT kernel config optionHauke Mehrtens2022-01-281-0/+1
| | | | | | | This new kernel configuration option is available when building the octeontx target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Fix compile warningHauke Mehrtens2022-01-282-4/+8
| | | | | | | | | | This fixes the following compile warning: CC init/do_mounts.o init/do_mounts.c:478:19: warning: 'mount_ubi_rootfs' defined but not used [-Wunused-function] 478 | static int __init mount_ubi_rootfs(void) | ^~~~~~~~~~~~~~~~ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: 5.10: drop broken-flash-reset patchChuanhong Guo2022-01-281-180/+0
| | | | | | | | | | | | | | | Flash accessing instruction templates are determined during probe since v5.6 for spimem-dirmap support in spi-nor driver in upstream commit: df5c21002cf4 ("mtd: spi-nor: use spi-mem dirmap API") As a result, changing bus_width on the fly doesn't work anymore and this patch will cause executing spi-mem ops with 3-byte address on 16-32M flash area. We can't easily revert that behavioral change upstream so drop the patch to prevent u-boot and eeprom from being erased. Fixes: b10d604459("kernel: add linux 5.10 support") Reported-by: Frank Di Matteo <dimatto@foxmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: bump 5.10 to 5.10.92Rui Salvaterra2022-01-1647-406/+176
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.91Rui Salvaterra2022-01-161-7/+7
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.171John Audia2022-01-161-7/+7
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: 5.10: Backport pending Armada 3720 comphy patchesMarek Behún2022-01-156-0/+2114
| | | | | | | | | | | | | | Backport 5 pending patches [1] for Armada 3720 comphy driver and one patch for device tree, applied to mvebu-dt64, but pending to appear in Linus' tree [2]. These patches makes the driver work correctly even with older, buggy versions of TF-A firmware. [1] http://lists.infradead.org/pipermail/linux-phy/2022-January/002598.html [2] http://lists.infradead.org/pipermail/linux-phy/2021-December/002279.html Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: 5.10: Backport Armada 3720 comphy patches from 5.15Marek Behún2022-01-152-0/+117
| | | | | | | | | Backport 2 patches for Armada 3720 comphy from 5.15 kernel. These are needed for clear application of pending patches that fix this driver. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: 5.10: Backport pending pci-aardvark changes fixing MSI supportMarek Behún2022-01-1523-0/+1725
| | | | | | | | | | | | | Backport Aardvark PCIe controller driver changes that fix MSI support, that were recently sent to the linux-pci mailing list [1]. These changes fix MSI and MSI-X support for this PCIe controller, which, among other things, make it possible to use NVMe drives with this PCIe controllers. [1] https://lore.kernel.org/linux-pci/20220110015018.26359-1-kabel@kernel.org/ Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: 5.10: Backport pci-aardvark driver changes from 5.17Marek Behún2022-01-1511-0/+545
| | | | | | | | | | | | | | Backport Aardvark PCIe controller driver changes that will appear in 5.17 kernel. They are currently accessible on LKML [1], in linux-next repository [2], or in Bjorn Helgaas' repository [3]. These changes mainly enhance driver removal method. [1] https://lore.kernel.org/linux-pci/20211130172913.9727-1-kabel@kernel.org/ [2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/log/drivers/pci?h=next-20220107 [3] https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=next Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: mtk_bmt: add support for the bbt format used on mt7621Felix Fietkau2022-01-131-6/+202
| | | | | | | | | This does not have spare blocks for remapping, and it is also not suitable for random write access. It only skips over bad blocks on linear writes of an image to a partition. As such, it is really only suitable for the kernel partition, or other partitions with mostly static data Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-07 18:34:02 +0000