aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic
Commit message (Collapse)AuthorAgeFilesLines
* generic: Fix per interface nf_call_iptables settingFelix Fietkau2015-09-181-172/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit r30917 ("kernel: bypass all netfilter hooks if the sysctls for that functionality have been disabled - eliminates the overhead of enabling CONFIG_BRIDGE_NETFILTER in the kernel config") introduced an optimization which should reduce/eliminate the overhead for traffic send over bridges on kernels compiled with CONFIG_BRIDGE_NETFILTER=y. But this optimization breaks the nf_call_iptables per bridge setting which is more fine grained than the global sysctl net.bridge.bridge-nf-call-iptables setting. A test reflecting a real world setup was created to identify if this really eliminates the overhead and if per-bridge nf_call_iptables could be used in some setups to increase the throughput. A Qualcomm Atheros QCA9558 based system with one ethernet and an ath9k wifi 3x3 in HT40 mode was used. Cables from the AP to the wifi station were used to reduce interference problems during the tests. The wlan interface was put in one bridge interface called br-wlan. This bridge usually contains some more wlan interfaces. The eth0 was put in a second bridge called br-lan. This usually contains some other privileged wlan or mesh interfaces. Routing was added between br-lan and br-wlan. Three kernels were tested: * (default) OpenWrt kernel for this device * (brfilter-global) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y * (brfilter-local) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y and without 644-bridge_optimize_netfilter_hooks.patch The changes to the the netfilter settings of the bridge were done via: * (brfilter-global) /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=1 * (brfilter-lobal) echo 1 > /sys/class/net/br-lan/bridge/nf_call_iptables and/or echo 1 > /sys/class/net/br-wan/bridge/nf_call_iptables A station connected to the wlan0 (AP) interface was used to send traffic to a PC connected via ethernet. iperf with 3 concurrent transmissions was used to generate the traffic. | kernel | br-nf-* global | nf-call* iface | download | upload | |-----------------|----------------|----------------|----------|----------| | default | 0 | - | 209 | 268 | | brfilter-global | 0 | - | 185 | 243 | | brfilter-local | 0 | - | 187 | 243 | | brfilter-local | 0 | br-lan | 157 | 226 | | brfilter-local | 0 | br-lan br-wlan | 139 | 161 | | brfilter-global | 1 | - | 136 | 162 | Download/upload results in Mibit/s It can be seen that the patch doesn't eliminate the overhead. It can also be seen that the throughput of brfilter-global and brfilter-local with disabled filtering is the roughly the same. Also the throughput for brfilter-global and brfilter-local for enabled filtering on all bridges is roughly the same. But also the brfilter-local throughput is higher when only br-lan requires the filtering. This setting would not be possible with 644-bridge_optimize_netfilter_hooks.patch applied and thus can only be compared with brfilter-global and filtering enabled for all interfaces. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Backport of r46835 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47002 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()Felix Fietkau2015-09-181-19/+26
| | | | | | | | | | | | A call to pskb_may_pull() might reallocate skb->data. Therefore we should only assign the src-pointer after any potential reallocations. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46721 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47001 3c298f89-4303-0410-b956-a3cf2f4a3e73
* Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor ↵Felix Fietkau2015-09-181-20/+17
| | | | | | | | | | | | | | | | | | | | | | solicitation (#17625)" This reverts commit a080e8e1943156168913d0353a2e99d1151102aa. It did not fix the problem but just hid some symptom. The real issue was that IGMP/MLD report suppression was not considered for the multicast-to-unicast feature. A recent netifd which isolates IGMP/MLD reports between STAs by utilizing AP-isolation and bridge-hairpinning should have fixed this. It is perfectly fine to apply multicast-to-unicast to IPv6 Neighbor Solicitations, too (once that feature is configured correctly). Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46720 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47000 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: solos-pci: Increase headroom on received packetsFelix Fietkau2015-09-171-0/+54
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46993 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46995 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: ipv6: ip6_fragment: fix headroom tests and skb leakFelix Fietkau2015-09-172-1/+102
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46992 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46994 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: drop some left XHCI patch for 4.0Rafał Miłecki2015-09-111-46/+0
| | | | | | | | It was accidentally added in r46094. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46849 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: kernel: update 3.18 to 3.18.21Jonas Gorski2015-09-112-6/+6
| | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21 Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46847 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: restore 640-bridge_no_eap_forward.patch to its original formFelix Fietkau2015-09-081-1/+1
| | | | | | | | | | | | It was corrupted in r38528. The most obvious symptom is repeated messages like this: Tue Sep 8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address Signed-off-by: Dmitry Ivanov <dima@ubnt.com> Backport of r46821 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46822 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabledJonas Gorski2015-08-231-0/+35
| | | | | | | | | | | Properly treat -ENOSYS as no PHY, else ehci-orion won't work without generic phy support. Backport of r46711. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46712 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: kernel: update 3.18 to 3.18.20Hauke Mehrtens2015-08-171-5/+5
| | | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46680 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: kernel: add missing config optionHauke Mehrtens2015-07-121-0/+1
| | | | | | | | | | | This should fix build of sunxi. Backport of r46304 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46310 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: kernel: update 3.18 to 3.18.18Hauke Mehrtens2015-07-127-31/+31
| | | | | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18 Backport of r46299, r46303 and r46308. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46309 3c298f89-4303-0410-b956-a3cf2f4a3e73
* CC: kernel: update 3.18 to 3.18.17Jonas Gorski2015-07-013-64/+1
| | | | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17 Backport of r46150. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46155 3c298f89-4303-0410-b956-a3cf2f4a3e73
* b53: Allow using all 8 ports on BCM53011Rafał Miłecki2015-06-221-1/+1
| | | | | | | | | | | | | On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000 (BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port 5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and usually 3 of them are connected to the SoC. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Backport of r46104 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46107 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: make USB_XHCI_PLATFORM selectableRafał Miłecki2015-06-212-0/+92
| | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Backport of r46079 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46094 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.18 to 3.18.16Jonas Gorski2015-06-173-32/+32
| | | | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16 Signed-off-by: Jonas Gorski <jogo@openwrt.org> Backport of r46011. git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46015 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config symbolFelix Fietkau2015-06-171-0/+1
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r46007 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46009 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing config symbol (#19870)Felix Fietkau2015-06-151-0/+1
| | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Backport of r45992 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@45993 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: remove linux 4.0Felix Fietkau2015-06-14201-32076/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@45975 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar8216: Fix problem with AR8337 MAC swap handlingFelix Fietkau2015-06-142-4/+6
| | | | | | | | | | | | | | | | | | | | | AR8337 supports a configuration bit to swap MAC0 and MAC6. Currently this is set in general if an AR8337 is detected and causes issues with devices using an AR8334 (internally an AR8337, just less chip pins). And it might even cause issues with AR8337-based devices with different board designs. Swapping the MAC's however isn't needed for AR8337 in general. It's just needed in case of certain board designs (affected devices seem to be based on Atheros reference board AP135/136-010). Therefore this configuration bit should be moved to platform data. The patch includes the needed changes to the device initialization code of affected devices. Hopefully I didn't miss any .. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45970 3c298f89-4303-0410-b956-a3cf2f4a3e73
* b53: fix memory out of bounds access on 64 bit targetsJonas Gorski2015-06-101-2/+2
| | | | | | | | | | | | | On device reset the sizes for the vlan and port tables were wrongly calculated based on the pointer size instead of the struct size. This causes buffer overruns on 64 bit targets, resulting in panics. Fix this by dereferencing the pointers. Reported-by: Fedor Konstantinov <blmink@mink.su> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45938 3c298f89-4303-0410-b956-a3cf2f4a3e73
* b53: widen stp state mask to 3 bits (instead of 2)Jonas Gorski2015-06-101-1/+1
| | | | | | | | | | | | | | | At least on my b53 chip, the mask is 3 bits wide, and because of this some STP states are not set properly and discarded when read. Maybe for some other chips it makes sense to have just 2 bits width, but I don't have other versions around to test/validate. If that's the case then maybe we could add another STP state mask. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45937 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport config-related bcma patches from 4.2Rafał Miłecki2015-06-082-0/+98
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45927 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: move a symbol from the ipq806x config to generic to prevent it from ↵Felix Fietkau2015-06-072-0/+2
| | | | | | | | being nuked by make kernel_oldconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45920 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: adjust mips highmem offset to avoid the need for -mlong-calls on ↵Felix Fietkau2015-06-052-0/+34
| | | | | | | | systems with >256M RAM Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45891 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport ssb fix for WRT350N v1 (BCM4705) rebootsRafał Miłecki2015-06-012-8/+10
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45865 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: upstream fix: mount overlayfs r/o if workdir cannot be createdJohn Crispin2015-05-301-0/+109
| | | | | | | | move the patch to the proper folder Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45848 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing STMMAC options in generic configsJohn Crispin2015-05-292-0/+4
| | | | | | | | | | | STMMAC_PLATFORM and STMMAC_PCI have been added recently in the kernel, but show up only when STMMAC driver is enabled. So se'll add it in the generic config, so the kernel build doesn't stall whenever we enable this driver. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45828 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: bridge: backport two snooping related patchesFelix Fietkau2015-05-273-1/+158
| | | | | | | | | | | | | | | | With this patch the following two patches are backported: * bridge: fix parsing of MLDv2 reports * bridge: allow setting hash_max + multicast_router if interface is down The former one is an important fix which got just applied to the net-tree and is queued for stable. The latter is a patch which is needed to make the hash_max and multicast_router attributes configurable through netifd. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45783 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic/4.0: update to 4.0.4Imre Kaloz2015-05-2611-28/+22
| | | | | | | | | | Update kernel sources and refresh some patches. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45761 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add missing generic config symbolJonas Gorski2015-05-221-0/+1
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45714 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: update 3.18 to 3.18.14Jonas Gorski2015-05-2115-139/+29
| | | | | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45711 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic/4.0: fix error during kernel patch applicationSteven Barth2015-05-201-10/+3
| | | | | | | | | | | | | | | | | | | | Commit 5168c9a5702648eb690d32ec821647aca80aeba9 introduced a regression during patch application on the 4.0 kernel. Some of the patched content doesn't match the actual code, therefore leading to the following error: Applying patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch patching file net/ipv6/ip6_output.c Hunk #1 FAILED at 886. 1 out of 1 hunk FAILED -- rejects in file net/ipv6/ip6_output.c patching file net/ipv6/route.c Hunk #1 succeeded at 2247 (offset 2 lines). Patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch does not apply (enforce with -f) This change just adapts the actual patch to fix what is in kernel 4.0 and make it apply cleanly. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45705 3c298f89-4303-0410-b956-a3cf2f4a3e73
* linux: backport IPv6 SAS fixes for source-specific routesSteven Barth2015-05-192-0/+202
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45699 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport struct ssb_sprom changes submitted by MIPS treeRafał Miłecki2015-05-132-0/+64
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45677 3c298f89-4303-0410-b956-a3cf2f4a3e73
* b53: Allow using all ports on BCM53012Rafał Miłecki2015-05-121-1/+1
| | | | | | | | | | | | | This chipset has at least 8 usable ports, e.g. Netgear R8000 has ports 5, 7 and 8 connected to Ethernet interfaces: vlan1ports=0 1 2 3 5 7 8* vlan2ports=4 8u Port 6 seems to be always disabled. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45676 3c298f89-4303-0410-b956-a3cf2f4a3e73
* mtd: remove the warning about read-only caused by size vs. block boundary ↵Felix Fietkau2015-05-102-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | mismatch Since the kernel/rootfs split handling was modified 2 years ago by r37283 ( https://dev.openwrt.org/changeset/37283 ) and by the subsequent checkins, users have seen rather scary mtd errors in the log at every boot. The message ends "-- forcing read-only", which looks a bit error-like. That error has been mentioned in some forum threads, when users have noticed this message instead of some actual error. [ 2.940000] 0x000000070000-0x000000ff0000 : "firmware" [ 2.970000] 2 netgear-fw partitions found on MTD device firmware [ 2.970000] 0x000000070000-0x000000188440 : "kernel" [ 2.980000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 2.990000] 0x000000188440-0x000000ff0000 : "rootfs" The patch removes the rather useless warning message. signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45669 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix regression in backtrace module info change (#19631)Felix Fietkau2015-05-102-26/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45665 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: add CRYPTO_DEV_QCE option to default configFelix Fietkau2015-05-102-0/+2
| | | | | | | | | | This option has been added in kernel 3.17. It shows-up only when both ARCH_QCOM and CRYPTO are enabled. So we'll disable these two by default to avoid stalling the build when these conditions are met. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45658 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: when KALLSYMS is disabled, print module address + size for matching ↵Felix Fietkau2015-05-102-0/+76
| | | | | | | | backtrace entries Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45655 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: fix pppoe disconnect issuesFelix Fietkau2015-05-093-0/+143
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45653 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport first bcma patches from 4.2Rafał Miłecki2015-05-092-0/+74
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45652 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: add accidentally left out fib trie backport patchFelix Fietkau2015-05-081-0/+52
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45650 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic: refresh patchesLuka Perkov2015-05-081-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45648 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport upstream usbnet fix (fixes #19455)Felix Fietkau2015-05-061-0/+107
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45621 3c298f89-4303-0410-b956-a3cf2f4a3e73
* generic/4.0: update to 4.0.1Imre Kaloz2015-05-031-6/+6
| | | | | | | | | | | Also refresh one patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45601 3c298f89-4303-0410-b956-a3cf2f4a3e73
* The ability to read MAC addresses from MTD is useful for other targets besidesImre Kaloz2015-05-032-0/+150
| | | | | | | | | | ramips and lantiq as well. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45596 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: implement RENAME_EXCHANGE support for jffs2 - overlayfs requires itFelix Fietkau2015-04-252-0/+116
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45580 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport rest of bgmac patches to 4.0Rafał Miłecki2015-04-2311-0/+824
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45573 3c298f89-4303-0410-b956-a3cf2f4a3e73
* kernel: backport few bgmac patches to 4.0Rafał Miłecki2015-04-235-39/+605
| | | | | | | | | I still need to test following patch before backporting: bgmac: leave interrupts disabled as long as there is work to do Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45571 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-19 04:54:43 +0000