aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/pending-5.10
Commit message (Collapse)AuthorAgeFilesLines
* kernel: Refresh on 5.10.138Hauke Mehrtens2022-08-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refresh all patches on top of kernel 5.10.138. The following patches were applied upstream: bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more. bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch Fixes: 89956c653252 ("kernel: bump 5.10 to 5.10.138") Fixes: 4209c33ae27d ("kernel: bump 5.10 to 5.10.137") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.137Petr Štetiar2022-08-282-2/+2
| | | | | | | | | | | Removed following upstreamed patch: * bcm53xx: 081-next-ARM_dts_BCM53015-add-mr26.patch All other patches automagically rebased. Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit d1163fd13f6498826d202f0b58cedf32d7891d52)
* kernel: bump 5.10 to 5.10.135John Audia2022-08-141-1/+1
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit ccff2fbaea50ae983a25483a40ae2dbaeeca5581)
* kernel: Backport upstream flowtable patches from 5.15Hauke Mehrtens2022-08-142-3/+3
| | | | | | | | | | | | | | | | | | | This backports some patches from kernel 5.15 to fix issues with flowtable offloading in kernel 5.10. OpenWrt backports most of the patches related to flowtable offloading from kernel 5.15 already, but we are missing some of the extra fixes. This fixes some connection tracking problems when a flow gets removed from the offload and added to the normal SW path again. The patch 614-v5.18-netfilter-flowtable-fix-TCP-flow-teardown.patch was extended manually with the nf_conntrack_tcp_established() function. All changes are already included in kernel 5.15. Fixes: #8776 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 96ef2dabce1a5f102d53a15f33383193b47fd297)
* kernel: silence refresh warningChristian Lamparter2022-08-061-1/+1
| | | | | | | |Warning: trailing whitespace in line 66 of drivers/mtd/parsers/Kconfig Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit d6801e0d3f8b0e764fef3d698edf74b3758667ec)
* kernel: bump 5.10 to 5.10.134John Audia2022-07-301-1/+1
| | | | | | | All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 7be62b1187bb7e21bcdaadfc3d47713a91f05898)
* kernel: bump 5.10 to 5.10.133John Audia2022-07-301-1/+1
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 913f160ac6c4dcf69ec0eb805c8a1cee809ace45)
* kernel: bump 5.10 to 5.10.129John Audia2022-07-191-8/+8
| | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: drop patch adding hardcoded kernel compilation flagsRafał Miłecki2022-07-081-25/+0
| | | | | | | | | | | | | | | | | | | | 1. KCFLAGS should be used for custom flags 2. Optimization flags are arch / SoC specific 3. -fno-reorder-blocks may *worsen* network performace on some SoCs 4. Usage of flags was *reversed* since 5.4 and noone reported that If we really need custom flags then CONFIG_KERNEL_CFLAGS should get default value adjusted properly (per target). Ref: 4e0c54bc5bc8 ("kernel: add support for kernel 5.4") Link: http://lists.openwrt.org/pipermail/openwrt-devel/2022-June/038853.html Link: https://patchwork.ozlabs.org/project/openwrt/patch/20190409093046.13401-1-zajec5@gmail.com/ Cc: Felix Fietkau <nbd@nbd.name> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 22168ae68101b95d03741b0e9e8ad20b8a5ae5b7)
* kernel: use KCFLAGS for passing EXTRA_OPTIMIZATION flagsRafał Miłecki2022-07-081-9/+3
| | | | | | | | | | This uses kernel's generic variable and doesn't require patching it with a custom Makefile change. It's expected *not* to change any behaviour. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 1d42af720c6b6dcfcdd0b89bce386fca1607dcb3) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 24e27bec9a6df1511a504cf04cd9578a23e74657)
* kernel: Refresh patches for all targetsHauke Mehrtens2022-07-032-3/+3
| | | | | | | | | | | | | | | | This refreshes the patches on top of kernel 5.4.127. Deleted (upstreamed): bcm27xx/patches-5.10/950-0005-Revert-mailbox-avoid-timer-start-from-callback.patch [0] bcm27xx/patches-5.10/950-0678-bcm2711_thermal-Don-t-clamp-temperature-at-zero.patch [1] Needed manual modifications: bcm27xx/patches-5.10/950-0410-drm-atomic-Pass-the-full-state-to-CRTC-atomic-begin-.patch [0]: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.127&id=bb2220e0672b7433a9a42618599cd261b2629240 [1]: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.127&id=83603802954068ccd1b8a3f2ccbbaf5e0862acb0 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: fix variable erasesize patchJohn Thomson2022-06-301-208/+64
| | | | | | | | | | Update this pending patch to remove the untested (variable eraseregions) section, alongside simplifying the patch. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> [refresh and split out unrelated refreshes] Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> (cherry picked from commit 4f7065ed250932d6ff725ba175e734ad4c782f14)
* kernel: bump 5.10 to 5.10.124John Audia2022-06-275-27/+27
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 9e5d743422edc4036cda7d96b96ba62705f382de)
* kernel: bump 5.10 to 5.10.122John Audia2022-06-276-13/+13
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 9edc514e3dafcc36db69046a37daab818cfc1a07)
* kernel: bump 5.10 to 5.10.121John Audia2022-06-279-17/+17
| | | | | | | | | | | | | Manually rebased: oxnas/patches-5.10/100-oxnas-clk-plla-pllb.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 706a4ec40cce108f484b40805bfa48619a0a7f09)
* kernel: move Toshiba-TC58NVG0S3H patch to ipq40xxChristian Lamparter2022-06-091-31/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hannu Nyman wrote in openwrt's github issue #9962: |Based on forum discussion, the commit 0bc794a |"kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash" |causes flash memory chip misdetection for some other |Fritzbox devices, as the commit only defines a 4-byte flash |memory chip ID that matches several chips used in the devices. | |See discussion from this onward |<https://forum.openwrt.org/t/openwrt-22-03-0-rc1-first-release-candidate/126045/182> | |OpenWrt 22.03.0-rc2 and rc3 are causing on a Fritzbox 7412 |bootloops due to a misdetected flash chip. | |Yup, that patch is missing the 5th ID byte entirely - both chips |share the same first 4; | | TC58NVG0S3HTA00 = 0x98 0xf1 0x80 0x15 0x72 (digikey datasheet, page 35) | TC58BVG0S3HTA00 = 0x98 0xf1 0x80 0x15 0xf2 (digikey datasheet, page 28) | |The commit has also been backported to openwrt-22.03 after rc1, |so both rc2 and rc3 suffer from this bug." Andreas' TC58NVG0S3H seems not to follow Toshibas/Kioxa's own datasheet. It only reports the first four bytes: "98 f1 80 15 00 00 00 00". This patch changes the id_len in the entry to 8. This makes it so that Andreas' NAND is still detected. At the same time, this prevents other Toshiba NAND flash chips - that share the same four bytes - from being misdetected. Upstream (Miquel Raynal) decided to drop this patch for now. But he advised to keep it in OpenWrt. As other devices could be affected. <https://lore.kernel.org/linux-mtd/20220606155919.23001410@xps-13/> Reported-by: Peter-vdL Tested-by: Peter-vdL Tested-by: Andreas B<C3><B6>hler <dev@aboehler.at> Fixes: 0bc794a66845 ("kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash") Link: <https://github.com/openwrt/openwrt/issues/9962> (actually move the patch, added comment about possible counterfeits) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.120John Audia2022-06-071-1/+1
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800, x86/64 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit f800f8d6fc4f21ed87454aa657ebbf376dc3b6cf)
* kernel: bump 5.10 to 5.10.119John Audia2022-06-071-2/+2
| | | | | | | | | | | Delete the crypto-lib-blake2s kmod package, as BLAKE2s is now built-in. Patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800, x86/64 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit cd634afe6cb6565eb6865931c8d73d97cab3600a)
* kernel: bump 5.10 to 5.10.118John Audia2022-06-072-3/+3
| | | | | | | | | | | | | | Removed upstreamed: generic-backport/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch generic-backport/774-v5.15-2-igc-remove-phy-type-checking.patch All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit b789a588b1c55fe1df7e2d6ae1c4f84b96a03a95)
* kernel: bump 5.10 to 5.10.116Hauke Mehrtens2022-05-181-6/+1
| | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/900-regulator-consumer-Add-missing-stubs-to-regulator-co.patch All other patches automatically rebased. Compile-tested: lantiq/xrx200, armvirt/64 Run-tested: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.115John Audia2022-05-179-72/+15
| | | | | | | | | | | | | | Removed upstreamed: backport-5.10/850-v5.17-0004-PCI-aardvark-Clear-all-MSIs-at-setup.patch pending-5.10/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit b754b0c721131005efa7127151088e9c23dc9053)
* kernel: bump 5.10 to 5.10.114John Audia2022-05-172-3/+3
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 8592df67f40b3afdee68e36dc3820187ec0f98fc)
* kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flashAndreas Böhler2022-05-151-0/+36
| | | | | | | | | The Toshiba TC58NVG0S3HTA00 is detected with 64 byte OOB while the flash has 128 byte OOB. This adds a static NAND ID entry to correct this. Signed-off-by: Andreas Böhler <dev@aboehler.at> (cherry picked from commit 0bc794a66845738eef7eeb7e13877ffb8aec17f7) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: fix corrupted padding on small packets with mt753x dsaFelix Fietkau2022-05-061-0/+29
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 203ffc4ca75d43ac32b164c5a474e3ce36999809)
* kernel: fix flow offload issues with pppoeFelix Fietkau2022-05-064-0/+181
| | | | | | | sync xt_FLOWOFFLOAD code with latest version of nft_flow_offload Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 726ef8ba2dbe4d4a693c4d9300bc69e234e6d67d)
* mediatek: add patches for MT7622 WED (wireless ethernet dispatch)Felix Fietkau2022-05-0611-4/+3594
| | | | | | | This series also contains other improvement for hardware flow offload support Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 0f029b3d2b505b40aca9a24a002838ed1060f83d)
* kernel: bump 5.10 to 5.10.113John Audia2022-05-012-12/+12
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit e08942e76a162962892020a0f7e52ef751ec68e4)
* kernel: bump 5.10 to 5.10.112John Audia2022-05-011-4/+4
| | | | | | | | | | | | | | Manually rebased: ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit cab20be008591f89dd89c4e444cdf022fa7f57eb)
* kernel: bump 5.10 to 5.10.111John Audia2022-04-173-75/+3
| | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/850-0003-PCI-aardvark-Fix-support-for-MSI-interrupts.patch apm821xx/patches-5.10/150-ata-sata_dwc_460ex-Fix-crash-due-to-OOB-write.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit 0085dd6cb5e3c57dd22994c22ce893575711b6f7)
* kernel: Fix oob layout of XTX XT26G0xAFelix Matouschek2022-04-111-3/+3
| | | | | | | | | | | | | | | | The correct oob layout is: ECC: region->offset = 48; region->length = 16; Free: /* Reserve 1 byte for the BBM. */ region->offset = 1; region->length = 47; Signed-off-by: Felix Matouschek <felix@matouschek.org> (cherry picked from commit a5de91a88a8a33ced147bb5340fd45599f652d4d)
* kernel: Fix readid method of XTX XT26G0xAFelix Matouschek2022-04-111-3/+3
| | | | | | | The correct readid method is SPINAND_READID_METHOD_OPCODE_ADDR. Signed-off-by: Felix Matouschek <felix@matouschek.org> (cherry picked from commit 3711aee56d864fab066d76afadc9d04e1c18102e)
* kernel: bump 5.10 to 5.10.110John Audia2022-04-1018-78/+34
| | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Compile-/run-tested: ath79/generic (Archer C7 v2). Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebased in 22.03 tree] Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit b92ec82235b996ece32bc84af177adf1a4dcb90e)
* kernel: bump 5.10 to 5.10.108Rui Salvaterra2022-03-271-3/+3
| | | | | | | | | | | | | | | | | Patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Tested-by: John Audia <graysky@archlinux.us> Build-tested: ath79/generic, ramips/mt76{20,21,x8}, ipq40xx, mvebu, realtek/rtl{838,930}x, x86/64 Run-tested: ramips/mt7621, mvebu Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> (cherry picked from commit 2c26eb4e484fe6d7a8159a22f97b6db7ca6e9221)
* kernel: bump 5.10 to 5.10.107John Audia2022-03-191-1/+1
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: move parser_trx patches of custom magic to genericINAGAKI Hiroshi2022-03-061-1/+1
| | | | | | | | This patch moves the patches of parser_trx in mediatek target to generic/backport-5.10 to use the changes from ramips target and backport the additional patch of the parser. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: add support for XMC XM25QH128CLanghua Ye2022-03-051-0/+11
| | | | | | | The XMC XM25QH128C is a 16MB SPI NOR chip. The patch is verified on Ruijie RG-EW3200GX PRO. Datasheet available at https://www.xmcwh.com/uploads/435/XM25QH128C.pdf Signed-off-by: Langhua Ye <y1248289414@outlook.com>
* kernel: bump 5.10 to 5.10.102John Audia2022-03-014-20/+10
| | | | | | | | | | | | | | | Removed upstreamed: bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.102&id=f333c1916fd6b55900029bf8f918cc00009e2111 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-012-58/+1
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* net: ethernet: mtk_eth_soc: add ipv6 flow offload supportDavid Bentham2022-02-191-0/+65
| | | | | | | | | | Add the missing IPv6 flow offloading support for routing only. Hardware flow offloading is done by the packet processing engine (PPE) of the Ethernet MAC and as it doesn't support mangling of IPv6 packets, IPv6 NAT cannot be supported. Signed-off-by: David Bentham <db260179@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: 5.10: backport gpio-cascade and related symbolsMauri Sandberg2022-02-191-0/+232
| | | | | | | | The patch is under review at [1]. Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> [1] http://patchwork.ozlabs.org/project/linux-gpio/patch/20211026191506.3099-3-maukka@ext.kapsi.fi/
* kernel: bump 5.10 to 5.10.99John Audia2022-02-111-52/+0
| | | | | | | | | | | | | | | | | | | | Had to update generic defconfig (make kernel_menuconfig CONFIG_TARGET=generic) for this bump, but since that only modifies the target defined in .config, and since that target also needed to be updated for unrelated reasons, manually propagated the newly added symbol to the generic config. Removed upstreamed: pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.99&id=080f371d984e8039c66db87f3c54804b0d172329 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.98John Audia2022-02-113-15/+10
| | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* generic: kernel: add patches with ZTE MF286D modemPawel Dembicki2022-02-052-0/+121
| | | | | | | | | | | This patch includes patches sent upstream with ZTE MF286D modem support. It adds support for qmi and serial option driver. Links to ML: https://lore.kernel.org/linux-usb/20220111221132.14586-1-paweldembicki@gmail.com/ https://lore.kernel.org/linux-usb/20220111221205.14662-1-paweldembicki@gmail.com/ Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: bump 5.10 to 5.10.96Rui Salvaterra2022-02-011-8/+8
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-0126-50/+102
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: Fix compile warningHauke Mehrtens2022-01-281-2/+4
| | | | | | | | | | This fixes the following compile warning: CC init/do_mounts.o init/do_mounts.c:478:19: warning: 'mount_ubi_rootfs' defined but not used [-Wunused-function] 478 | static int __init mount_ubi_rootfs(void) | ^~~~~~~~~~~~~~~~ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: 5.10: drop broken-flash-reset patchChuanhong Guo2022-01-281-180/+0
| | | | | | | | | | | | | | | Flash accessing instruction templates are determined during probe since v5.6 for spimem-dirmap support in spi-nor driver in upstream commit: df5c21002cf4 ("mtd: spi-nor: use spi-mem dirmap API") As a result, changing bus_width on the fly doesn't work anymore and this patch will cause executing spi-mem ops with 3-byte address on 16-32M flash area. We can't easily revert that behavioral change upstream so drop the patch to prevent u-boot and eeprom from being erased. Fixes: b10d604459("kernel: add linux 5.10 support") Reported-by: Frank Di Matteo <dimatto@foxmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: bump 5.10 to 5.10.92Rui Salvaterra2022-01-1634-322/+157
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.91Rui Salvaterra2022-01-161-7/+7
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: Backport pending Armada 3720 comphy patchesMarek Behún2022-01-156-0/+2114
| | | | | | | | | | | | | | Backport 5 pending patches [1] for Armada 3720 comphy driver and one patch for device tree, applied to mvebu-dt64, but pending to appear in Linus' tree [2]. These patches makes the driver work correctly even with older, buggy versions of TF-A firmware. [1] http://lists.infradead.org/pipermail/linux-phy/2022-January/002598.html [2] http://lists.infradead.org/pipermail/linux-phy/2021-December/002279.html Signed-off-by: Marek Behún <kabel@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 15:57:32 +0000