aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/pending-5.10
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.107John Audia2022-03-191-1/+1
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: move parser_trx patches of custom magic to genericINAGAKI Hiroshi2022-03-061-1/+1
| | | | | | | | This patch moves the patches of parser_trx in mediatek target to generic/backport-5.10 to use the changes from ramips target and backport the additional patch of the parser. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: add support for XMC XM25QH128CLanghua Ye2022-03-051-0/+11
| | | | | | | The XMC XM25QH128C is a 16MB SPI NOR chip. The patch is verified on Ruijie RG-EW3200GX PRO. Datasheet available at https://www.xmcwh.com/uploads/435/XM25QH128C.pdf Signed-off-by: Langhua Ye <y1248289414@outlook.com>
* kernel: bump 5.10 to 5.10.102John Audia2022-03-014-20/+10
| | | | | | | | | | | | | | | Removed upstreamed: bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.102&id=f333c1916fd6b55900029bf8f918cc00009e2111 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-012-58/+1
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* net: ethernet: mtk_eth_soc: add ipv6 flow offload supportDavid Bentham2022-02-191-0/+65
| | | | | | | | | | Add the missing IPv6 flow offloading support for routing only. Hardware flow offloading is done by the packet processing engine (PPE) of the Ethernet MAC and as it doesn't support mangling of IPv6 packets, IPv6 NAT cannot be supported. Signed-off-by: David Bentham <db260179@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: 5.10: backport gpio-cascade and related symbolsMauri Sandberg2022-02-191-0/+232
| | | | | | | | The patch is under review at [1]. Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> [1] http://patchwork.ozlabs.org/project/linux-gpio/patch/20211026191506.3099-3-maukka@ext.kapsi.fi/
* kernel: bump 5.10 to 5.10.99John Audia2022-02-111-52/+0
| | | | | | | | | | | | | | | | | | | | Had to update generic defconfig (make kernel_menuconfig CONFIG_TARGET=generic) for this bump, but since that only modifies the target defined in .config, and since that target also needed to be updated for unrelated reasons, manually propagated the newly added symbol to the generic config. Removed upstreamed: pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.99&id=080f371d984e8039c66db87f3c54804b0d172329 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.98John Audia2022-02-113-15/+10
| | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* generic: kernel: add patches with ZTE MF286D modemPawel Dembicki2022-02-052-0/+121
| | | | | | | | | | | This patch includes patches sent upstream with ZTE MF286D modem support. It adds support for qmi and serial option driver. Links to ML: https://lore.kernel.org/linux-usb/20220111221132.14586-1-paweldembicki@gmail.com/ https://lore.kernel.org/linux-usb/20220111221205.14662-1-paweldembicki@gmail.com/ Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: bump 5.10 to 5.10.96Rui Salvaterra2022-02-011-8/+8
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-0126-50/+102
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: Fix compile warningHauke Mehrtens2022-01-281-2/+4
| | | | | | | | | | This fixes the following compile warning: CC init/do_mounts.o init/do_mounts.c:478:19: warning: 'mount_ubi_rootfs' defined but not used [-Wunused-function] 478 | static int __init mount_ubi_rootfs(void) | ^~~~~~~~~~~~~~~~ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: 5.10: drop broken-flash-reset patchChuanhong Guo2022-01-281-180/+0
| | | | | | | | | | | | | | | Flash accessing instruction templates are determined during probe since v5.6 for spimem-dirmap support in spi-nor driver in upstream commit: df5c21002cf4 ("mtd: spi-nor: use spi-mem dirmap API") As a result, changing bus_width on the fly doesn't work anymore and this patch will cause executing spi-mem ops with 3-byte address on 16-32M flash area. We can't easily revert that behavioral change upstream so drop the patch to prevent u-boot and eeprom from being erased. Fixes: b10d604459("kernel: add linux 5.10 support") Reported-by: Frank Di Matteo <dimatto@foxmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: bump 5.10 to 5.10.92Rui Salvaterra2022-01-1634-322/+157
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.91Rui Salvaterra2022-01-161-7/+7
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: Backport pending Armada 3720 comphy patchesMarek Behún2022-01-156-0/+2114
| | | | | | | | | | | | | | Backport 5 pending patches [1] for Armada 3720 comphy driver and one patch for device tree, applied to mvebu-dt64, but pending to appear in Linus' tree [2]. These patches makes the driver work correctly even with older, buggy versions of TF-A firmware. [1] http://lists.infradead.org/pipermail/linux-phy/2022-January/002598.html [2] http://lists.infradead.org/pipermail/linux-phy/2021-December/002279.html Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: 5.10: Backport pending pci-aardvark changes fixing MSI supportMarek Behún2022-01-1523-0/+1725
| | | | | | | | | | | | | Backport Aardvark PCIe controller driver changes that fix MSI support, that were recently sent to the linux-pci mailing list [1]. These changes fix MSI and MSI-X support for this PCIe controller, which, among other things, make it possible to use NVMe drives with this PCIe controllers. [1] https://lore.kernel.org/linux-pci/20220110015018.26359-1-kabel@kernel.org/ Signed-off-by: Marek Behún <kabel@kernel.org>
* mikrotik: enable variable size eraseOskari Lemmela2022-01-131-0/+397
| | | | | | | Add support for variable size erase blocks. Enable it to all targets which has mikrotik targets. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* kernel: bump 5.10 to 5.10.90Rui Salvaterra2022-01-071-1/+1
| | | | | | | | Add and enable a new kconfig knob to disable unprivileged eBPF by default. Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: add patches to fix macronix flashNick Hainke2021-12-292-0/+64
| | | | | | | | | | | | | | | | | | | | | | | mtd: spi-nor: locking support for MX25L6405D Macronix MX25L6405D supports locking with four block-protection bits. Currently, the driver only sets three bits. If the bootloader does not sustain the flash chip in an unlocked state, the flash might be non-writeable. Add the corresponding flag to enable locking support with four bits in the status register. mtd: spi-nor: disable 16-bit-sr for macronix Macronix flash chips seem to consist of only one status register. These chips will not work with the "16-bit Write Status (01h) Command". Disable SNOR_F_HAS_16BIT_SR for all Macronix chips. Refreshed: - 0052-mtd-spi-nor-use-4-bit-locking-for-MX25L12805D.patch Fixes: 15aa53d7ee65 ("ath79: switch to Kernel 5.10") Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: bump 5.10 to 5.10.85John Audia2021-12-171-4/+4
| | | | | | | | | | | | | | | | Removed target for patch which does not exist: bcm27xx/patches-5.10/950-0249-kbuild-Disable-gcc-plugins.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800* Run-tested: bcm2711/RPi4B, ipq806x/R7800* * Had to revert 7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149) Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.84John Audia2021-12-171-5/+5
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.83John Audia2021-12-121-9/+9
| | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0024-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch[1] bcm53xx/patches-5.10/033-v5.16-0025-ARM-dts-BCM5301X-Add-interrupt-properties-to-GPIO-no.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=b2cd6fdcbe0a5cb44e4610a08cc58261d494a885 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=9db1d4a3c2700e1cc84c3d61199411d75c2a3ec6 Build system: x86_64* Build-tested: bcm2711/RPi4B, ipq806x/R7800† Run-tested: bcm2711/RPi4B, ipq806x/R7800† * Had to revert 7c99085bd69742f66207d61e9f2da5ec4f8f9d2f in order to build (latest bump of ca-certificates) † Had to revert 7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149) Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.82John Audia2021-11-271-2/+2
| | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0014-ARM-dts-NSP-Fix-mpcore-mmc-node-names.patch Manually rebased: ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.81John Audia2021-11-271-2/+2
| | | | | | | | | | | | | Manually rebased: octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.80Rui Salvaterra2021-11-192-6/+6
| | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch [1] bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch [2] lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch [3] lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch [4] lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch [5] lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch [6] Manually rebased: ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=47462c5e600fbaffd755cd13dedd80d04e41ff83 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=2fde76df1885a6bec04317e457121326070450eb [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=9b366f5221d8aa64b22f35be137a5749326444ce [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=5af57ce8a6155fe3e4270d28d171abf8903bebc0 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=b92a5df2c7adc79a57481445f67de0c1c716581f [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=6b72caabc47011d03f44064452b2c65e8ed18326 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: fix mac-address-increment patchAnsuel Smith2021-11-152-14/+24
| | | | | | | | | Fix mac address increment patch. Permit to overflow to the next byte and correctly calculate the incremented mac. Reported-by: Chen Minqiang <ptpt52@gmail.com> Fixes: d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: bump 5.10 to 5.10.78John Audia2021-11-071-1/+1
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.77Rui Salvaterra2021-11-061-5/+5
| | | | | | | | | Deleted (upstreamed): bcm53xx/patches-5.10/081-v5.15-Revert-pinctrl-bcm-ns-support-updated-DT-binding-as-.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=01c2881bb0e0a71b87ca425e1b763ac13855aa7e Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: add support for ESMT F25L16PA(2S) SPI-NORJihoon Han2021-10-311-0/+11
| | | | | | | | | This fixes support for Dongwon T&I DW02-412H which uses F25L16PA(2S) flash. Signed-off-by: Jihoon Han <rapid_renard@renard.ga> Reviewed-by: Sungbo Eo <mans0n@gorani.run> [refresh patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.10 to 5.10.76Rui Salvaterra2021-10-301-2/+2
| | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0145-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch [1] Manually rebased: bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch Note: although automatically rebaseable, the last patch has been edited to avoid conflicting bit definitions. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=b6f32897af190d4716412e156ee0abcc16e4f1e5 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: backport QCA83x PHY resume fix, DAC amplitude preferred ↵Matthew Hagan2021-10-241-2/+2
| | | | | | | | | | | master, debug reg names Backport workaround for QCA8327 PHY resume, which does not properly support genphy_suspend/resume. Also add DAC amplitude fix for the QCA8327 PHY, set port to preferred master and add proper names to debug regs. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport at803x QCA83xx phy support improvementsMatthew Hagan2021-10-241-2/+2
| | | | | | | | | | This commit add accepted upstream patches that improve & tidy qca83xx support. 1 - Split qca8327 to A & B variants, identifiable by phy_id 2 - Add suspend/resume support to qca8xx phys 3 - Tidy spacing and phy naming. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport qca8k stability improvementsMatthew Hagan2021-10-241-2/+2
| | | | | | | | | This is a backport of Ansuel Smith's "Multiple improvement to qca8k stability" series. The QCA8337 switch is available on multiple platforms including ipq806x, ath79 and bcm53xx. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: silence bogus "Missing #address-cells in interrupt provider" ↵Christian Lamparter2021-10-241-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | warnings Rosen reported strange dtc warnings that had their origin in an upstream patch to 5.8-rc1. Upon further digging this revealed an ongoing thread [0] discussing the topic: > [...]I don't think we need a bunch of warning fix patches to add > these everywhere. Also, the need for #address-cells pretty much makes > no sense on any modern system. It is a relic from days when the bus > (address) topology and interrupt topology were related. and later on: > So really, we only need to be checking for #address-cells in nodes > with interrupt-map. This patch backports just the patch which removed the warning message (this is from the upstream dtc project [1] - but not the kernel). the patch does not add the checking of the #address-cells in nodes with interrupt-map. [0] <https://lore.kernel.org/linux-devicetree/91e3405245c89f134676449cf3822285798d2ed2.1612189652.git.michal.simek@xilinx.com/> [1] <https://git.kernel.org/pub/scm/utils/dtc/dtc.git/commit/?id=d8d1a9a77863a8c7031ae82a1d461aa78eb72a7b> Link: <https://github.com/openwrt/openwrt/pull/4685> Reported-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: 5.10: backport 100 BaseX SFP supportRobert Marko2021-10-211-1/+1
| | | | | | | | | | Backport upstream support for 100Base-FX, 100Base-LX, 100Base-PX and 100Base-BX10 SFP modules. This is a prerequisite for the Globalscale MOCHAbin hybrid 1G SFP/Copper support backporting. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: bump 5.10 to 5.10.75Rui Salvaterra2021-10-212-2/+2
| | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0735-xhci-guard-accesses-to-ep_state-in-xhci_endpoint_res.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=dc3e0a20dbb9dbaa22f4a33dea34230f8c663c40 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: backport a rewrite of the mips eBPF JIT implementationFelix Fietkau2021-10-141-2/+2
| | | | | | | This adds support for eBPF JIT for 32 bit targets and significantly improves correctness. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 5.10 to 5.10.72John Audia2021-10-101-5/+5
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.71John Audia2021-10-103-9/+9
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: drop support for mtd-mac-addressAnsuel Smith2021-10-093-114/+8
| | | | | | | | Now that we have fully switched to nvmem interface we can drop the use of mtd-mac-address patches as it's not used anymore and the new nvmem implementation should be used for any new device. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: bump 5.10 to 5.10.70Rui Salvaterra2021-09-302-3/+3
| | | | | | | Deleted (upstreamed): bcm53xx/patches-5.10/181-Revert-USB-bcma-Add-a-check-for-devm_gpiod_get.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.68Rui Salvaterra2021-09-304-28/+4
| | | | | | | | | | | | | Deleted (upstreamed): generic/backport-5.10/610-v5.13-02-netfilter-Fix-fall-through-warnings-for-Clang.patch generic/backport-5.10/792-v5.15-0001-net-dsa-b53-Fix-calculating-number-of-switch-ports.patch generic/backport-5.10/792-v5.15-0002-net-dsa-b53-Set-correct-number-of-ports-in-the-DSA-s.patch generic/backport-5.10/792-v5.15-0003-net-dsa-b53-Fix-IMP-port-setup-on-BCM5301x.patch generic/backport-5.10/840-0001-PCI-of-Don-t-fail-devm_pci_alloc_host_bridge-on-miss.patch generic/backport-5.10/840-0002-PCI-iproc-Fix-BCMA-probe-resource-handling.patch generic/pending-5.10/498-mtd-mtdconcat-select-readwrite-function.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.67Rui Salvaterra2021-09-302-7/+7
| | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0312-vc4_hdmi-Set-HD_CTL_WHOLSMP-and-HD_CTL_CHALIGN_SET.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.65Rui Salvaterra2021-09-302-17/+11
| | | | | | | | | Manually refreshed: generic/pending-5.10/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch bcm27xx/patches-5.10/950-0053-firmware-bcm2835-Support-ARCH_BCM270x.patch bcm27xx/patches-5.10/950-0087-firmware-raspberrypi-Add-backward-compatible-get_thr.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: add patch to fix an issue with kernel headers that broke perfFelix Fietkau2021-09-251-0/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add a bridge feature for filtering BPDU packets on portsFelix Fietkau2021-09-211-0/+177
| | | | | | This will be used to ensure that APs don't transmit unnecessary STP packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix jffs2 compilation with GCC_PLUGIN_RANDSTRUCT enabledMatt Merhar2021-09-131-1/+1
| | | | | | | | | Designated initializers are required when using the randstruct GCC plugin, otherwise an error like the following is seen: ./include/linux/lzma.h:60:31: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init] Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
* kernel: bump 5.10 to 5.10.62Rui Salvaterra2021-09-091-13/+13
| | | | | | Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-25 21:47:48 +0000