openwrt/upstream - upstream openwrt

	Commit message (Expand)	Author	Age	Files	Lines
*	kernel: update kernel 3.18 to version 3.18.43	Stijn Tintel	2016-10-24	1	-1/+1
*	kernel: fix module load issue in the dma-buf debloat patch	Felix Fietkau	2016-01-20	1	-1/+10
*	kernel: modularize dma shared buffer code to eliminate kernel bloat	Felix Fietkau	2016-01-19	1	-0/+35

--- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -22,6 +22,7 @@ struct bcma_bus; /* main.c */ bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value, int timeout); +void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core); int bcma_bus_register(struct bcma_bus *bus); void bcma_bus_unregister(struct bcma_bus *bus); int __init bcma_bus_early_register(struct bcma_bus *bus, --- a/drivers/bcma/driver_chipcommon.c +++ b/drivers/bcma/driver_chipcommon.c @@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma return; } - irq = bcma_core_irq(cc->core); + irq = bcma_core_irq(cc->core, 0); /* Determine the registers of the UARTs */ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); --- a/drivers/bcma/driver_gpio.c +++ b/drivers/bcma/driver_gpio.c @@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str handle_simple_irq); } - hwirq = bcma_core_irq(cc->core); + hwirq = bcma_core_irq(cc->core, 0); err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio", cc); if (err) @@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st return; bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO); - free_irq(bcma_core_irq(cc->core), cc); + free_irq(bcma_core_irq(cc->core, 0), cc); for (gpio = 0; gpio < chip->ngpio; gpio++) { int irq = irq_find_mapping(cc->irq_domain, gpio); --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -115,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct * If disabled, 5 is returned. * If not supported, 6 is returned. */ -static unsigned int bcma_core_mips_irq(struct bcma_device *dev) +unsigned int bcma_core_mips_irq(struct bcma_device *dev) { struct bcma_device *mdev = dev->bus->drv_mips.core; u32 irqflag; @@ -133,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s return 5; } -unsigned int bcma_core_irq(struct bcma_device *dev) -{ - unsigned int mips_irq = bcma_core_mips_irq(dev); - return mips_irq <= 4 ? mips_irq + 2 : 0; -} -EXPORT_SYMBOL(bcma_core_irq); - static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) { unsigned int oldirq = bcma_core_mips_irq(dev); @@ -423,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv break; default: list_for_each_entry(core, &bus->cores, list) { - core->irq = bcma_core_irq(core); + core->irq = bcma_core_irq(core, 0); } bcma_err(bus, "Unknown device (0x%x) found, can not configure IRQs\n", --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p pr_info("PCI: Fixing up device %s\n", pci_name(dev)); /* Fix up interrupt lines */ - dev->irq = bcma_core_irq(pc_host->pdev->core); + dev->irq = bcma_core_irq(pc_host->pdev->core, 0); pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); readrq = pcie_get_readrq(dev); @@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, pci_ops); - return bcma_core_irq(pc_host->pdev->core); + return bcma_core_irq(pc_host->pdev->core, 0); } EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -11,6 +11,7 @@ #include <linux/bcma/bcma.h> #include <linux/slab.h> #include <linux/of_address.h> +#include <linux/of_irq.h> MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); MODULE_LICENSE("GPL"); @@ -153,6 +154,46 @@ static struct device_node *bcma_of_find_ return NULL; } +static int bcma_of_irq_parse(struct platform_device *parent, + struct bcma_device *core, + struct of_phandle_args *out_irq, int num) +{ + __be32 laddr[1]; + int rc; + + if (core->dev.of_node) { + rc = of_irq_parse_one(core->dev.of_node, num, out_irq); + if (!rc) + return rc; + } + + out_irq->np = parent->dev.of_node; + out_irq->args_count = 1; + out_irq->args[0] = num; + + laddr[0] = cpu_to_be32(core->addr); + return of_irq_parse_raw(laddr, out_irq); +} + +static unsigned int bcma_of_get_irq(struct platform_device *parent, + struct bcma_device *core, int num) +{ + struct of_phandle_args out_irq; + int ret; + + if (!parent || !parent->dev.of_node) + return 0; + + ret = bcma_of_irq_parse(parent, core, &out_irq, num); + if (ret) { + bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n", + ret); + return 0; + } + + return irq_create_of_mapping(&out_irq); +} + static void bcma_of_fill_device(struct platform_device *parent, struct bcma_device *core) { @@ -161,18 +202,47 @@ static void bcma_of_fill_device(struct p node = bcma_of_find_child_device(parent, core); if (node) core->dev.of_node = node; + + core->irq = bcma_of_get_irq(parent, core, 0); } #else static void bcma_of_fill_device(struct platform_device *parent, struct bcma_device *core) { } +static inline unsigned int bcma_of_get_irq(struct platform_device *parent, + struct bcma_device *core, int num) +{ + return 0; +} #endif /* CONFIG_OF */ -static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core) +unsigned int bcma_core_irq(struct bcma_device *core, int num) { - int err; + struct bcma_bus *bus = core->bus; + unsigned int mips_irq; + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: + return bus->host_pci->irq; + case BCMA_HOSTTYPE_SOC: + if (bus->drv_mips.core && num == 0) { + mips_irq = bcma_core_mips_irq(core); + return mips_irq <= 4 ? mips_irq + 2 : 0; + } + if (bus->host_pdev) + return bcma_of_get_irq(bus->host_pdev, core, num); + return 0; + case BCMA_HOSTTYPE_SDIO: + return 0; + } + return 0; +} +EXPORT_SYMBOL(bcma_core_irq); + +void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core) +{ core->dev.release = bcma_release_core_dev; core->dev.bus = &bcma_bus_type; dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index); @@ -196,6 +266,11 @@ static void bcma_register_core(struct bc case BCMA_HOSTTYPE_SDIO: break; } +} + +static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core) +{ + int err; err = device_register(&core->dev); if (err) { --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c @@ -505,6 +505,7 @@ int bcma_bus_scan(struct bcma_bus *bus) bus->nr_cores++; other_core = bcma_find_core_reverse(bus, core->id.id); core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + bcma_prepare_core(bus, core); bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", core->core_index, bcma_device_name(&core->id), --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -448,4 +448,6 @@ extern u32 bcma_chipco_pll_read(struct b #define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */ extern u32 bcma_core_dma_translation(struct bcma_device *core); +extern unsigned int bcma_core_irq(struct bcma_device *core, int num); + #endif /* LINUX_BCMA_H_ */ --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -43,12 +43,12 @@ struct bcma_drv_mips { extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); -extern unsigned int bcma_core_irq(struct bcma_device *core); +extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); #else static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } -static inline unsigned int bcma_core_irq(struct bcma_device *core) +static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev) { return 0; } --- a/Documentation/devicetree/bindings/bus/bcma.txt +++ b/Documentation/devicetree/bindings/bus/bcma.txt @@ -8,6 +8,11 @@ Required properties: The cores on the AXI bus are automatically detected by bcma with the memory ranges they are using and they get registered afterwards. +Automatic detection of the IRQ number is not working on +BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide +them manually through device tree. Use an interrupt-map to specify the +IRQ used by the devices on the bus. The first address is just an index, +because we do not have any special register. The top-level axi bus may contain children representing attached cores (devices). This is needed since some hardware details can't be auto @@ -22,6 +27,22 @@ Example: ranges = <0x00000000 0x18000000 0x00100000>; #address-cells = <1>; #size-cells = <1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x000fffff 0xffff>; + interrupt-map = + /* Ethernet Controller 0 */ + <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 1 */ + <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + + /* PCIe Controller 0 */ + <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; chipcommon { reg = <0x00000000 0x1000>;