aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/files
Commit message (Collapse)AuthorAgeFilesLines
* generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLANJonas Gorski2013-02-211-4/+2
| | | | | | | | | | Setting this bit stops BCM53125 (bgmac actually) from receiving any packets. This bit is cleared conditionally in b53_switch_reset and it seems the same is done in bcmrobo.c which never sets that bit again. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35723
* generic: b53: remove empty spacesJonas Gorski2013-02-211-2/+2
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35722
* generic: ar8216: cleanup function/variable namesGabor Juhos2013-02-171-110/+110
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35642
* generic: ar8216: rename struct ar8216_priv to ar8xxx_privGabor Juhos2013-02-171-94/+94
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35641
* generic: ar8216: move PHY4 RGMII workaround code out of the loopGabor Juhos2013-02-141-11/+11
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35603
* generic: ar8216: register the switch from the probe routineGabor Juhos2013-02-141-17/+12
| | | | | | | | | | | | | | | | | Currently the switch gets registered when an ethernet driver connects to a PHY of the switch. This method does not work with the ethernet drivers which are connecting to the PHY from their ndo_open callback. With those ethernet drivers, the driver tries to register the switch each time when the etherned device is opened and this causes a deadlock. Move the switch registration into the probe routine to fix this problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35602
* ar8216: remove superfluous code from ar8216_config_initGabor Juhos2013-02-111-12/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35562
* generic: ar8216: don't use ethernet device name in register_switchGabor Juhos2013-02-111-3/+4
| | | | | | | | | | The switches are accessed via an MDIO bus. Set the alias to the name of the MDIO bus, and show that in the message along with the name of the switch switch device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35560
* generic: ar8216: reuse the private data from ar8216_probeGabor Juhos2013-02-111-33/+40
| | | | | | | | | | | The private data of the switch is already allocated in ar8216_priv, assign that to each PHY on the same MDIO bus. Also remove the redundant code from ar8216_config_init. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35559
* generic: ar8216: use phydev instead of pdev everywhereGabor Juhos2013-02-111-33/+33
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35555
* generic: ar8216: use pr_* macros for kernel messagesGabor Juhos2013-02-111-8/+7
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35554
* generic: ar8216: fix PHY features setupGabor Juhos2013-02-111-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | Sujith says: This commit breaks the WAN port on my AP96 - DHCP fails. Reverting it fixes the issue. commit b67cc3a0cdd02973610d4d5a63226d1c44841e94 Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Fri Feb 8 09:13:18 2013 +0000 generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73 This change restores the previous behaviour and moves the code into the ar8216_probe function. Reported-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Sujith Manoharan <sujith@msujith.org> SVN-Revision: 35549
* generic: ar8216: add ar8xxx_probe_switch helperGabor Juhos2013-02-101-31/+42
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35547
* generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stopGabor Juhos2013-02-101-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35546
* generic: ar8216: free mib counters from ar8xxx_freeGabor Juhos2013-02-101-4/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35545
* generic: ar8216: add ar8xxx_free helperGabor Juhos2013-02-101-6/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35544
* generic: ar8216: add ar8xxx_create{,mii} helpersGabor Juhos2013-02-101-14/+33
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35543
* generic: ar8216: remove redundant phy address checkGabor Juhos2013-02-101-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35542
* generic: ar8216: only set phy_ptr if packet mangling is usedGabor Juhos2013-02-101-2/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35541
* generic: ar8216: add defines for the AR8316 POSTRIP registerGabor Juhos2013-02-102-2/+32
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35539
* generic: ar8216: don't probe the chip multiple timesGabor Juhos2013-02-101-8/+8
| | | | | | | | It is only needed when the private data is allocated. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35538
* generic: ar8216: add sanity check to ar8216_probeGabor Juhos2013-02-101-0/+41
| | | | | | | | | Verify that the mdio bus has PHY devices with a supported PHY ID at address 0-4. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35537
* generic: ar8216: skip probe on unused PHY addressesGabor Juhos2013-02-101-0/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35536
* generic: b53: fix reverted error check in probeJonas Gorski2013-02-101-1/+1
| | | | | | | | | | | | b53_switch_detect returns value returned by b53_read8, which is 0 for success. So fail (and return error) only if b53_switch_detect returned something else than 0. This fixes supported and advertising being zeros for MDIO access. Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35534
* generic: ar8216: move sleep out of the loopGabor Juhos2013-02-091-1/+2
| | | | | | | | | | It is enough to sleep once after ANEG is enabled on all PHYs. This reduces boot time on boards with AR8316 switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35532
* generic: ar8216: simplify phy features setupGabor Juhos2013-02-081-11/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35518
* generic: ar8216: don't use mdio bus specific functions in ar8216_id_chipGabor Juhos2013-02-081-8/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35517
* generic: ar8216: use inline function to convert swdev to ar8216Gabor Juhos2013-02-071-15/+19
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35514
* generic: ar8216: add mii_bus field to struct ar8216_privGabor Juhos2013-02-071-11/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35513
* generic: mvswitch: add detach callbackGabor Juhos2013-02-071-1/+12
| | | | | | | | | | | Use the detach callback to disable packet mangling to avoid possible NULL pointer dereference. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35512
* generic: ar8216: add detach callbackGabor Juhos2013-02-071-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code uses the 'remove' callback to disable packet mangle on the underlying ethernet device. However the attached_dev is always NULL when the 'remove' callback is called by phylib, and this causes NULL pointer dereference, like this: [ 475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac [ 475.310000] Oops[#1]: [ 475.310000] Cpu 0 [ 475.310000] $ 0 : 00000000 00000000 00000000 00000001 [ 475.310000] $ 4 : 828dde00 00000005 828dde08 ffffffff [ 475.310000] $ 8 : 00380081 00380081 82902a40 00000001 [ 475.310000] $12 : 00000037 00370081 00000001 00000000 [ 475.310000] $16 : 82865000 828dde08 828dde00 00000001 [ 475.310000] $20 : 00000080 00460000 00000002 77151448 [ 475.310000] $24 : 00000000 801abfd4 [ 475.310000] $28 : 82cc2000 82cc3d58 0053c3c4 801c7eac [ 475.310000] Hi : 00000007 [ 475.310000] Lo : 00000004 [ 475.310000] epc : 801cdcf0 ar8216_remove+0x1c/0x94 [ 475.310000] Tainted: G O [ 475.310000] ra : 801c7eac phy_remove+0x4c/0x6c [ 475.310000] Status: 1000cc03 KERNEL EXL IE [ 475.310000] Cause : 00800008 [ 475.310000] BadVA : 000000f0 [ 475.310000] PrId : 00019750 (MIPS 74Kc) [ 475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80 211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440) [ 475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8 82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94 00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000 83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000 00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000 ... [ 475.310000] Call Trace: [ 475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94 [ 475.310000] [<801c7eac>] phy_remove+0x4c/0x6c [ 475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0 [ 475.310000] [<801ad7fc>] device_release_driver+0x28/0x40 [ 475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c [ 475.310000] [<801aac44>] device_del+0x110/0x170 [ 475.310000] [<801aacb8>] device_unregister+0x14/0x28 [ 475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70 [ 475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx] [ 475.310000] [ 475.310000] Code: 1200001c 8c82017c ac800128 <8c4500f0> 3c03ffdf 3463ffff 00a31824 ac4300f0 ac4000e0 Add a detach callback and disable packet mangling in that to fix the problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35511
* generic: ar8216: clear driver specific data pointer in phy_deviceGabor Juhos2013-02-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed to avoid a NULL pointer dereference: [ 19.525270] Unable to handle kernel paging request for data at address 0x00000018 [ 19.532750] Faulting instruction address: 0xc016e104 [ 19.537714] Oops: Kernel access of bad area, sig: 11 [#1] [ 19.543102] P1010 RDB [ 19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d [ 19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000 [ 19.595681] REGS: c4bc3c10 TRAP: 0300 Tainted: G W O (3.7.6) [ 19.602284] MSR: 00029000 <CE,EE,ME> CR: 82002022 XER: 20000000 [ 19.608381] DEAR: 00000018, ESR: 00000000 [ 19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000 GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514 GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914 GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000 [ 19.646352] NIP [c016e104] register_switch+0x98/0x2d0 [ 19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.656697] Call Trace: [ 19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable) [ 19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c [ 19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8 [ 19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68 [ 19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c [ 19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8 [ 19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120 [ 19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c [ 19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60 [ 19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690 [ 19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc [ 19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294 [ 19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728 [ 19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70 [ 19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c [ 19.748646] --- Exception: c01 at 0x48091b34 [ 19.748646] LR = 0x480e4b64 [ 19.756033] Instruction dump: [ 19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040 [ 19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35497
* generic: ar8216: unregister switch on error pathGabor Juhos2013-02-051-4/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35496
* generic: convert crypto-ocf from kernel_thread to kthreadGabor Juhos2013-02-021-11/+8
| | | | | | | | | | | | | recent kernels have finally stopped exporting kernel_thread, since a deprecation circa 2006. This patch attempts to convert to the newer kernel kthread API, particularly in random.c [juhosg: remove randomproc variable, it is not required after the patch] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35456
* kernel: b53: the b53 spi driver depends on spiHauke Mehrtens2013-01-271-1/+1
| | | | SVN-Revision: 35340
* kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8Hauke Mehrtens2013-01-279-32/+32
| | | | | | These attributes where removed with kernel 3.8 and are now causing compile errors. SVN-Revision: 35328
* generic: add b53 swconfig switch driverJonas Gorski2013-01-2310-0/+2979
| | | | | | | | | | | | | Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports switches connected through MDIO, SPI or memory mapped registers, and supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch chips. Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35305
* generic: rtl8366_smi: only assign pvid if no pvid was set yetJonas Gorski2013-01-181-1/+7
| | | | | | | | | | | | | | Only assign a pvid if the current pvid is 0. Fixes using mixed tagged and untagged traffic on a port and the untagged vlan isn't the last one of which the port is a member. Tested on RTL8366S and RTL8367R. Fixes #8501. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35227
* kernel: add support for 3.8-rc2Florian Fainelli2013-01-082-1/+10
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35055
* generic: ar8216: add sgmii_delay_en field to ar8327_platform_dataGabor Juhos2012-12-253-0/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34881
* generic: ar8216: don't use 0 as default VID on AR8327Gabor Juhos2012-12-221-1/+3
| | | | | | | | VID0 is reserved for priority-tagged packets. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34862
* generic: ar8316: allow to configure port 6 via platform data on AR8327Gabor Juhos2012-12-222-17/+19
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34847
* generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_dataGabor Juhos2012-12-222-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34846
* make to rtl8366_smi of binding use gpio_is_validJohn Crispin2012-12-211-1/+1
| | | | SVN-Revision: 34816
* generic: rtl836x: fix compiler warningsGabor Juhos2012-12-174-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC drivers/net/phy/rtl8366rb.o In file included from drivers/net/phy/rtl8366s.c:16:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8366s.c: In function 'rtl8366s_probe': drivers/net/phy/rtl8366s.c:1094:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8366s.c:1055:32: warning: unused variable 'pdata'[-Wunused-variable] CC drivers/net/phy/rtl8366rb.o In file included from drivers/net/phy/rtl8366rb.c:17:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8366rb.c: In function 'rtl8366rb_probe': drivers/net/phy/rtl8366rb.c:1214:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8366rb.c:1175:32: warning: unused variable 'pdata'[-Wunused-variable] CC drivers/net/phy/rtl8367.o In file included from drivers/net/phy/rtl8367.c:15:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8367.c: In function 'rtl8367_probe': drivers/net/phy/rtl8367.c:1712:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8367.c:1677:32: warning: unused variable 'pdata' [-Wunused-variable] CC drivers/net/phy/rtl8367b.o In file included from drivers/net/phy/rtl8367b.c:15:0: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8367b.c: In function 'rtl8367b_probe': drivers/net/phy/rtl8367b.c:1494:2: warning: label 'err_out' defined but not used [-Wunused-label] drivers/net/phy/rtl8367b.c:1459:32: warning: unused variable 'pdata' [-Wunused-variable] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34731
* linux: generic: rtl836*: fix compilation with !CONFIG_OFJonas Gorski2012-12-156-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fixes the following errors caused by r34682: CC [M] drivers/net/phy/rtl8366_smi.o In file included from drivers/net/phy/rtl8366_smi.c:26:0: drivers/net/phy/rtl8366_smi.h:149:46: warning: 'struct platform_device' declared inside parameter list [enabled by default] drivers/net/phy/rtl8366_smi.h:149:46: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/phy/rtl8366_smi.c:1398:65: warning: 'struct platform_device' declared inside parameter list [enabled by default] drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe_plat': drivers/net/phy/rtl8366_smi.c:1400:44: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1402:11: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1403:16: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c: At top level: drivers/net/phy/rtl8366_smi.c:1415:46: warning: 'struct platform_device' declared inside parameter list [enabled by default] drivers/net/phy/rtl8366_smi.c:1415:21: error: conflicting types for 'rtl8366_smi_probe' drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe': drivers/net/phy/rtl8366_smi.c:1420:31: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1424:10: error: dereferencing pointer to incomplete type drivers/net/phy/rtl8366_smi.c:1425:3: warning: passing argument 1 of 'rtl8366_smi_probe_of' from incompatible pointer type [enabled by default] drivers/net/phy/rtl8366_smi.c:1392:19: note: expected 'struct device_node *' but argument is of type 'struct platform_device *' drivers/net/phy/rtl8366_smi.c:1427:3: warning: passing argument 1 of 'rtl8366_smi_probe_plat' from incompatible pointer type [enabled by default] drivers/net/phy/rtl8366_smi.c:1398:5: note: expected 'struct platform_device *' but argument is of type 'struct platform_device *' drivers/net/phy/rtl8366_smi.c: At top level: drivers/net/phy/rtl8366_smi.c:1438:1: error: conflicting types for 'rtl8366_smi_probe' drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here make[7]: *** [drivers/net/phy/rtl8366_smi.o] Error 1 make[6]: *** [drivers/net/phy] Error 2 make[5]: *** [drivers/net] Error 2 make[4]: *** [drivers] Error 2 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 34703
* make rtl8366 driver OF capableJohn Crispin2012-12-156-66/+121
| | | | SVN-Revision: 34682
* generic: disintegrate UAPI from include/linux/switch.hGabor Juhos2012-12-142-81/+98
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34677
* mac80211: ath9k: allow to load EEPROM data via firmware APIGabor Juhos2012-12-101-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34606
* generic: ar8216: set delay values for SGMII mode on AR8327Gabor Juhos2012-11-231-0/+14
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34315
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 09:51:34 +0000