aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/files
Commit message (Collapse)AuthorAgeFilesLines
* generic: ar8216: group MIB counters and use two basic ones only by defaultChuanhong Guo2019-05-203-81/+150
| | | | | | | | | | | | | | | | | There are too many MIB counters that almost nobody needs since commit d6366ce3665f ("generic: ar8216: mib_work_func: read all port mibs everytime"). In the worker function to poll MIB data, it deals with all ports instead of only one port every time, which introduces too many mdio operations that it becomes a heavy CPU load even on not-emulated MDIO bus. This commit groups MIB counters and enable only TxBytes and RxGoodBytes by default (both of which are necessary to get swconfig led working.) and adds an swconfig attribute to allow enabling all counters if users need them. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add mib_poll_interval switch attributeChuanhong Guo2019-05-203-8/+63
| | | | | | | | | | | | | | This allows specifying interval of polling MIB counters from userspace and allow completely turning off MIB counter support by setting mib_poll_interval to 0. Since MIB counter polling is a heavy CPU load for GPIO emulated MDIO bus, disable this behavior by default. Those who wants to use swconfig LEDs can enable them with qca,mib-poll-interval dts property or with swconfig command. Fixes: FS#2230 ("kworker spikes 100% cpu every 2 second.") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: b53: add support for kernels 5.0+Rafał Miłecki2019-04-041-0/+10
| | | | | | | | It adjusts b53 code to upstream changes from the commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: ar8216: introduce qca,mib-poll-interval propertyChuanhong Guo2019-03-242-2/+13
| | | | | | | | This allows users to specify a shorter mib poll interval so that the swconfig leds could behave normal with current get_port_stats() implementation. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: do a software reset for switch during hw_initChuanhong Guo2019-03-241-0/+3
| | | | | | | | | | | | | | This applies to ar8216 and ar8236. QCA's newer U-boot will enable the switch mdio master for FE switches which makes phy inaccessible from CPU mdio. (e.g. on TP-Link TL-WR941N v7 Chinese version which uses QCA9558+AR8236.) For these devices PHY probing is broken and mdio device probing is a must. We also need to disable switch mdio master in driver for later PHY initialization. Do a soft reset during hw_init so that mdio master can be disabled and expose PHYs to CPU mdio for later PHY accessing. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: mib_work_func: read all port mibs everytimeChuanhong Guo2019-03-242-9/+5
| | | | | | | | ar8xxx_mib_capture will update mib counters for all ports. Current code only update one port at a time and the data for other ports are lost. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add support for get_port_stats()Chuanhong Guo2019-03-243-25/+59
| | | | | | | | | | | | | | | | | | | | | | | Partially reverts commit eff3549c5883a9abc5dbff00c084cabbcfdf4437. AR7240 and AR9341 have buggy hardware switch LED trigger. The AR7240 one doesn't blink and the blinking of port0/port5 is reversed on AR9341 if we swap PHY0 and PHY4. (Only blinking is reversed, which means LED for PHY0 will lit when PHY0 is link up and will blink when PHY4 has active link and vice versa.) On these two chips a software swconfig LED trigger is required. This commit adds swconfig port stats back but: 1. move checking of mib_t/rxb_id into ar8xxx_chip since we can't distinguish ar7240sw and ar8216 using only chip id. 2. don't update mib counter in get_port_stat. This function is called every 0.01s and this capturing procedure will take up a lot of CPU. We already have a mib_work_func updating mib counters every 2s so return the saved counter instead of fetching new data. The blinking rate will be weird but it should solve the previously mentioned CPU time problem. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add support for ar724x/ar933x builtin switchChuanhong Guo2019-03-242-6/+112
| | | | | | | | | | | | | | This builtin switch is a bugless ar8216 with different mib counters and gigabit cpu port. Atheros uses the same device ID and it's impossible to distinguish the standalone one and the builtin one. So we add support to mdio device probe only. This switch doesn't have buggy vlan tag so it's not needed to enable atheros header. This commit changed ar8216_setup_port so that it can be reused for this switch. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: mdiodev: add qca,phy4-mii-enable optionChuanhong Guo2019-03-241-0/+6
| | | | | | This option allows setting phy4 as a phy connected directly to CPU. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: ar8229: add phy_read/phy_writeChuanhong Guo2019-03-242-0/+57
| | | | | | | the added function also works for ar8216 and will be used in the following ar7240 support. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add support for separated mdio bus for phy accessChuanhong Guo2019-03-242-1/+37
| | | | | | | | | | | | | | Atheros FE switches have a builtin mdio master available for PHY accessing and on ar724x/ar933x builtin switches this mdio master is the only way of accessing PHYs. After this patch if there is phy_read/phy_write method available in ar8xxx_chip we register a separated mdio bus for accessing PHYs. Still adds support for mdio device probing only since this isn't needed for those switches registered using PHY probing. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add support for ar8229Chuanhong Guo2019-03-242-5/+144
| | | | | | | | | | | | | | | | ar8229 is the builtin switch in ar934x and later chips. There is also a standalone version available and their registers/functions are the same. This commit added support for the builtin ar8229. The only thing missing for standalone ar8229 should be phy modes. Since I don't have a router using that, this commit doesn't add support for other phy modes. Only add its support for mdio-device probing method because the current PHY probing can't return 1G speed when it's a FE switch. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add mdio-device probing supportChuanhong Guo2019-03-241-1/+134
| | | | | | | currently only ar8327 and ar8236 are added since they are the only two I could verify. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: move ar8xxx_id_chip into ar8xxx_phy_probeChuanhong Guo2019-03-241-4/+4
| | | | | | | | ar8xxx_id_chip is used to determine current ar8xxx_chip using switch id and this isn't needed during mdiodev probing. Move it out of ar8xxx_probe_switch so that we can skip it. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: add device struct into struct ar8xxx_privChuanhong Guo2019-03-243-2/+5
| | | | | | dev has been taken up by switch_dev so it's named pdev instead. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: drop duplicated includeChuanhong Guo2019-03-241-1/+0
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: ar8216: move chip id reading into a separate functionChuanhong Guo2019-03-241-1/+12
| | | | | | | | | for mdio-device probing we still need to read chip id but ar8xxx_chip can be determined using drvdata. We can't distinguish the buggy standalone ar8216 and the builtin ar8216 in ar724x/ar933x using chip id. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: mtdsplit: wrgg: Support big and little endianLinus Walleij2019-03-131-0/+10
| | | | | | | | | | | | | | | | | | | The WRGG images exist in both big and little endian variants, as can be seen from the image generator in tools/firmware-utils/src/mkwrggimg.c, you either pass the "-b" flag or not. The D-Link DIR-685 is using little endian images so we need to support splitting these. Detect endianness like this: if the kernel entity size gets silly big (bigger than the flash memory) we are probably using the wrong endianness. Example: my kernel of 0x0067ff64 was switched around by wrong endianness and detected as 0x64ff67a0 (the actual size in swapped endianness + header 0xa0). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* owl-loader: fix crash caused by endian patchChristian Lamparter2019-03-061-1/+1
| | | | | | | | | | | This patch fixes a crash that occured on the BT Home Hub v5a (lantiq/xrx200) which resulted in the device bootlooping. Reported-by: Ryan Mounce <ryan@mounce.com.au> Tested-by: Vitalij Alshevsky <v_alshevsky@tut.by> Fixes: ddece08bf456 ("kernel: owl-loader: fix sparse endian warnings") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: owl-loader: fix sparse endian warningsChristian Lamparter2019-02-281-5/+5
| | | | | | | | | | | | | owl-loader.c:83:21: sparse: warning: incorrect type in assignment (different base types) owl-loader.c:83:21: sparse: expected unsigned short [usertype] reg owl-loader.c:83:21: sparse: got restricted __be16 const [usertype] reg owl-loader.c:84:21: sparse: warning: incorrect type in assignment (different base types) owl-loader.c:84:21: sparse: expected unsigned int [usertype] val owl-loader.c:84:21: sparse: got restricted __be16 const [usertype] low_val owl-loader.c:85:28: sparse: warning: restricted __be16 degrades to integer Reported-by: kbuild test robot Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add DT binding support to the Edimax uImage parserMathias Kresin2019-01-191-0/+10
| | | | | | It allows specifying those parsers directly in the DT. Signed-off-by: Mathias Kresin <dev@kresin.me>
* generic: ar8216: ar8327: kill warningsChuanhong Guo2019-01-131-3/+3
| | | | | | This fixed warnings caused by returning value in a void function Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: add DT binding support to the fit parserChristian Lamparter2018-12-171-0/+6
| | | | | | It allows specifying default and Netgear parsers directly in the DT. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add mv88e61xx switch port-mirroring supportDeng Qingfang2018-12-162-6/+169
| | | | | | Compile & run tested on mvebu Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* kernel: Make the patches apply on top of 4.19Hauke Mehrtens2018-12-151-6/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes the patches which were just copied in the previous commit apply on top of kernel 4.19. The patches in the backports-4.19 folder were checked if they are really in kernel 4.19 based on the title and only removed if they were found in the upstream kernel. The following additional patches form the pending folder went into upstream Linux 4.19: pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch Bigger changes were introduced to the m25p80 spi nor driver, as far as I saw it in the new code, it now has the functionality provided in this patch: pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch Part of this patch went upstream independent of OpenWrt: hack-4.19/220-gc_sections.patch This patch was reworked to match the changes done upstream. The MIPS DMA API changed a lot, this patch was rewritten to match the new DMA handling: pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch I did bigger manual changes to the following patches and I am not 100% sure if they are all correct: pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch pending-4.19/411-mtd-partial_eraseblock_write.patch pending-4.19/600-netfilter_conntrack_flush.patch pending-4.19/611-netfilter_match_bypass_default_table.patch pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch hack-4.19/211-host_tools_portability.patch hack-4.19/221-module_exports.patch hack-4.19/321-powerpc_crtsavres_prereq.patch hack-4.19/902-debloat_proc.patch This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Move modifications of b53.h into patchHauke Mehrtens2018-12-151-36/+0
| | | | | | | | | | The b53 driver was added as a dsa driver into the mainline Linux kernel, but we still use the swconfig based driver. The header file b53.h is used by both drivers, but the swconfig one needs an extra member, add this one in a patch to not overwrite the version shipped with the mainline kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Replace ledtrig-netdev with upstream backportHauke Mehrtens2018-12-151-444/+0
| | | | | | | | | | | The ledtrig-netdev was added to upstream Linux kernel 4.16, replace our own version with the patch based on the upstream version. This will remove the ledtrig-netdev support from kernel 3.18, because I not want to spend time on backporting it to 3.18. This will make it easier to use the upstream version with kernel 4.19, by just not applying this patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: drop unneeded LINUX_VERSION_CODE checksRafał Miłecki2018-12-135-28/+0
| | | | | | | All those parsers are used by 4.14 targets. They don't need that backward compatibility code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add DT binding support to the LZMA and WRG parsersRafał Miłecki2018-12-132-0/+14
| | | | | | It allows specifying those parsers directly in the DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add DT binding support to the TRX and minor parsersRafał Miłecki2018-12-092-0/+26
| | | | | | It allows specifying those parsers directly in the DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add DT binding support to AVM EVA parserDavid Bauer2018-12-061-0/+6
| | | | | | | It allows selecting split-firmware parser directly by specifying image-format in the device-tree. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: ar83xx: Add support for three GMAC's connectionRam Chandra Jangir2018-12-064-1/+69
| | | | | | | | | | | | | We have IPQ8064 AP161 board which has three GMAC's * RGMII x2 * SGMII x1. The existing ar8327 driver does not have support for three GMAC's connection, hence this change adds support for the same. This has been verified on AP148 and AP161 board. Signed-off-by: xiaofeis <xiaofeis@codeaurora.org> Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
* kernel: add DT binding support to the jimage parserPawel Dembicki2018-11-301-0/+11
| | | | | | | | It allows specifying jimage parser directly in the DT. Tested on LAVA LR-25G001 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: ar8xxx: get_arl_table now shows all ports of an entryGünther Kelleter2018-11-264-19/+13
| | | | | | | Multicast ARL entries can have multiple destination ports. Get and dump all destination ports of each entry, not just the lowest. Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
* ar8216: add adjust_link checkingPawel Dembicki2018-11-261-1/+2
| | | | | | | | | Driver crash when 'phydev->adjust_link' isn't provided. This patch check if 'phydev->adjust_link' exist before call the method. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* generic: rtl8367b: make it possible to specify cpu_port via DTChristian Lamparter2018-11-261-2/+4
| | | | | | | | This patch adds the feature to parse the existing cpu_port DT property, which is used to specify which port is the cpu port of the switch. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* generic: rtl836x: support defered probe on mdio-busChristian Lamparter2018-11-265-13/+17
| | | | | | | | | | | | | | | | On the WNDAP620, the mdio and mdc lines are controlled by the EMAC ethernet device. This results in a hen-vs-egg problem. The rtl8367b driver is probed before the ethernet driver and the mdio-bus is not available yet, which caused the rtl8367b driver to fail. This patch changes the rtl8366_smi_probe_of() function to return -EPROBE_DEFER if the mdio-bus lookup failed and changes rtl8366_smi_probe()'s signature to return the error code back to the callee, so it can propagate back to the kernel. Which, will retry the switch probe at a later time. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add missing version.h include to the TP-LINK parserRafał Miłecki2018-11-241-0/+1
| | | | | Fixes: a29c8d685be7 ("kernel: add DT binding support to the TP-LINK parser") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add DT binding support to the TP-LINK parserRafał Miłecki2018-11-241-0/+10
| | | | | | It allows triggering it directly by specifying format in the DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add DT binding support to the uimage parsersRafał Miłecki2018-11-241-0/+21
| | | | | | It allows specifying default and Netgear parsers directly in the DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: b53: register switch on probeDavid Bauer2018-11-231-22/+21
| | | | | | | | | | | | | Currently, the b53 MDIO switch driver registers the switch on config-init and not on device probe. Because of this, the switch gets added every time the associated interface comes up. This commit fixes this behavior by registering the switch on device probe. Compile- and run-tested on OCEDO Koala. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: add DT binding support to the Seama parserRafał Miłecki2018-11-221-0/+13
| | | | | | It allows specifying that parser directly in the DT. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: revert workarounds for AR8337 switchMathias Kresin2018-08-232-62/+1
| | | | | | | | | | | | | The intention of 967b6be118e3 ("ar8327: Add workarounds for AR8337 switch") was to remove the register fixups for AR8337. But instead they were removed for AR8327. The RGMII RX delay is forced even if the port is used as phy instead of mac, which results in no package flow at least for one board. Fixes: FS#1664 Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: rtl8366-smi: add Realtek switch management via mii-busFranz Flasch2018-06-252-17/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current version of rtl8366-smi module only supports Realtek switch managment via two gpio lines. This adds Realtek switch management via mii_bus. Tested on a Tp-link Archer C2 v1 (Mediatek SoC mt7620a based) dts-file configuration should look like this: rtl8367rb { compatible = "realtek,rtl8367b"; realtek,extif1 = <1 0 1 1 1 1 1 1 2>; mii-bus = <&mdio0>; }; &ethernet { status = "okay"; mtd-mac-address = <&rom 0xf100>; pinctrl-names = "default"; pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; port@5 { status = "okay"; mediatek,fixed-link = <1000 1 1 1>; phy-mode = "rgmii"; }; mdio0: mdio-bus { status = "okay"; }; }; Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Franz Flasch <franz.flasch@gmx.at>
* kernel: rtl8367b: drop redundant compatibleMathias Kresin2018-06-251-1/+0
| | | | | | | Remove the compatible without vendor prefix. It is formal wrong and not used in the tree. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add reset control support to rtl8366 driverJohn Crispin2018-05-243-6/+23
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: rtl8366_smi: guard of_mdiobus_register() callJo-Philipp Wich2018-05-111-1/+5
| | | | | | | | Make the call to of_mdiobus_register() dependant on CONFIG_OF to avoid pulling in an unwanted dependency on of_mdio.ko. Fixes: 3dc523f232 kernel: add OF support to rtl8355 driver Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: add OF support to rtl8355 driverJohn Crispin2018-05-071-1/+10
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar8216: reduce latency even further for ar8327 chipsFelix Fietkau2018-04-081-2/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar8216: reduce latency by inserting scheduling points into code hogging the CPUFelix Fietkau2018-04-081-2/+7
| | | | | | Should reduce network related latency caused by accessing MIB counters Signed-off-by: Felix Fietkau <nbd@nbd.name>