aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/files
Commit message (Collapse)AuthorAgeFilesLines
* kernel: yaffs2: update to version from 2015-06-02Hauke Mehrtens2015-08-155-42/+75
| | | | | | | | | | In addition to the update this also fixes compile problems with kernel 4.1. This closes #20323. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46609
* ar8216: add swconfig attributes for ARL table flushingFelix Fietkau2015-07-153-1/+67
| | | | | | | | Add swconfig attributes for flushing the ARL table globally or per port. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 46382
* ar8216: adjust ATU flushing in case of link changesFelix Fietkau2015-07-151-6/+4
| | | | | | | | | | If a link goes down, don't flush the complete ARL table. Only flush the entries for the respective port. Don't touch ARL table if a link goes up. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 46381
* ar8216: add ARL table flushing per portFelix Fietkau2015-07-154-4/+47
| | | | | | | | | | | | | Adds functions for flushing ARL table entries per port. Successfully tested on AR8327. Implementation for AR8216/AR8236/AR8316 is based on the AR8236 datasheet and assumes that the three chips share a common ATU register layout. Compile-tested only for AR8216/AR8236/AR8316. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 46380
* ar8216: add reading ARL table for AR8216/AR8236/AR8316Felix Fietkau2015-07-152-8/+98
| | | | | | | | | | | | | | | | Adds the chip-specific part of reading ARL table for AR8216/AR8236/AR8316. It's based on the AR8236 datasheet and compile-tested only as I couldn't find datasheets for AR8216/AR8316 and don't own devices with these chips. The existing ar8216_atu_flush implementation was used for all three chip types, therefore I guess they share a common ATU register layout. More testing would be appreciated. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 46379
* build: Prevent more gzip timestampsJohn Crispin2015-07-141-1/+1
| | | | | | | | | To improve reproducibility, prevent the inclusion of timestamps in the gzip header. Signed-off-by: Reiner Herrmann <reiner@reiner-h.de> SVN-Revision: 46361
* kernel: b53: fix build with brcm47xxHauke Mehrtens2015-07-031-0/+5
| | | | | | | | | The position of the nvram header file on brcm47xx changed with kernel version 4.1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46170
* b53: Allow using all 8 ports on BCM53011Rafał Miłecki2015-06-211-1/+1
| | | | | | | | | | | On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000 (BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port 5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and usually 3 of them are connected to the SoC. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46104
* ar8216: Fix problem with AR8337 MAC swap handlingFelix Fietkau2015-06-142-4/+6
| | | | | | | | | | | | | | | | | | | | | AR8337 supports a configuration bit to swap MAC0 and MAC6. Currently this is set in general if an AR8337 is detected and causes issues with devices using an AR8334 (internally an AR8337, just less chip pins). And it might even cause issues with AR8337-based devices with different board designs. Swapping the MAC's however isn't needed for AR8337 in general. It's just needed in case of certain board designs (affected devices seem to be based on Atheros reference board AP135/136-010). Therefore this configuration bit should be moved to platform data. The patch includes the needed changes to the device initialization code of affected devices. Hopefully I didn't miss any .. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 45970
* b53: fix memory out of bounds access on 64 bit targetsJonas Gorski2015-06-101-2/+2
| | | | | | | | | | | | | On device reset the sizes for the vlan and port tables were wrongly calculated based on the pointer size instead of the struct size. This causes buffer overruns on 64 bit targets, resulting in panics. Fix this by dereferencing the pointers. Reported-by: Fedor Konstantinov <blmink@mink.su> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45938
* b53: widen stp state mask to 3 bits (instead of 2)Jonas Gorski2015-06-101-1/+1
| | | | | | | | | | | | | | | At least on my b53 chip, the mask is 3 bits wide, and because of this some STP states are not set properly and discarded when read. Maybe for some other chips it makes sense to have just 2 bits width, but I don't have other versions around to test/validate. If that's the case then maybe we could add another STP state mask. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45937
* b53: Allow using all ports on BCM53012Rafał Miłecki2015-05-121-1/+1
| | | | | | | | | | | | | This chipset has at least 8 usable ports, e.g. Netgear R8000 has ports 5, 7 and 8 connected to Ethernet interfaces: vlan1ports=0 1 2 3 5 7 8* vlan2ports=4 8u Port 6 seems to be always disabled. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45676
* b53: improve overriding CPU port state on BCM5301XRafał Miłecki2015-04-122-2/+30
| | | | | | | | | | | | | | | | | On BCM5301X there are two different cases to handle: CPU port 8 vs. any other one. Support for CPU port 8 was already partially implemented but it lacked setting some extra bit for 2G speed. It also will need to be extended to implement "SMP dual core 3 GMAC setup". That's the reason for handling it in separated code block. This patch also adds overriding CPU port state for port other than 8. It requires using recently defined GMII_PORT registers. It was tested for regressions on BCM53011 revs 2 & 3. It was also confirmed to fix switch on some internal Broadcom board. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45402
* b53: clean up code to match kernel style betterJonas Gorski2015-04-106-20/+23
| | | | | | | | | | | | | * properly enclose macro arguments in paranthesis on use * remove trailing white space * convert C99 // comments * add missing blank lines after declaration * remove braces from single statement blocks * split lines > 80 chars (except for one) Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45356
* b53: define registers available and needed on BCM5301XJonas Gorski2015-04-101-0/+33
| | | | | | | | They are also present on some BCM63xx switches. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45355
* kernel: update yaffs code to the latest versionGabor Juhos2015-03-319-202/+438
| | | | | | | | | | | | | | | | | Use the latest version of the yaffs code. Fetched from the yaffs2 git tree and it is based on the following commit: commit 7e5cf0fa1b694f835cdc184a8395b229fa29f9ae Author: Charles Manning <cdhmanning@gmail.com> Date: Thu Aug 7 11:25:05 2014 +1200 yaffs-direct: Basic tests. Add lpthread flag for background gc support Signed-off-by: Charles Manning <cdhmanning@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45188
* b53: reverse duplex bit meaning for IMP state override registerJonas Gorski2015-03-181-1/+1
| | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44875
* kernel: mtdsplit: add support for FIT imageJohn Crispin2015-03-153-0/+146
| | | | | | | | | | | If this option is enabled, the FIT image format will be detected and split by the mtdsplit code. Detection is based upon the FDT magic, which will trigger the parsing and detection of the rootfs, ending-up in the creation of the 2 new partitions. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44792
* b53: global config is part of the management page, not the control pageJonas Gorski2015-03-151-2/+2
| | | | | | | | | | It will now actually enable the mib counters instead of enabling rx/tx for the first switch port. Reported-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44788
* swconfig: fix build with linux 4.0John Crispin2015-03-061-3/+6
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44617
* b53: fix mmap register read/writes > 32 bitJonas Gorski2015-02-271-34/+36
| | | | | | | | | | | | | | | | | | | | | | | For bcm63xx integrated switches, broadcom changed the data endianess to match the system endianess. But this only applies to within one word, which causes 48/64 bit values to be still split into their "litte endian" groups. E.g. 48 bit values (with 5 being the most significant byte) aligned 0x00 ..01 or 0123 0x04 2345 45.. will become 0x00 ..10 resp. 3210 0x04 5432 54.. Likewise for 64 bit values. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44568
* generic: ocf: irq compat stuff is not needed anymoreNicolas Thill2015-02-141-0/+2
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 44444
* kernel: mtdsplit_uimage: fix passed info about buf sizeRafał Miłecki2015-02-121-2/+2
| | | | | | | | We obviously can't use sizeof(*buf) which is always 1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44424
* kernel: mtdsplit_uimage: read more data to match Edimax needsRafał Miłecki2015-02-121-8/+12
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44415
* kernel: mtdsplit_uimage: use separated buffer for reading dataRafał Miłecki2015-02-121-18/+16
| | | | | | | | | We shouldn't read data directly into the header struct, as some devices (e.g. Edimax) need more bytes due to some extra header. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44414
* kernel: mtdsplit_uimage: add parser for Edimax devicesRafał Miłecki2015-02-121-0/+53
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44413
* mtdsplit_uimage: more generic header verify functionRafał Miłecki2015-02-121-11/+26
| | | | | | | | | | Some devices have uImage headers after some extra headers (e.g. Edimax devices). To support such cases our verify callback function should be allowed to return header offset, not just a boolean value. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44412
* kernel: fix compile error inside adm6996.cJohn Crispin2015-02-091-1/+1
| | | | | | | | drivers/net/phy/adm6996.c:881:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'u32' [-Wformat=] Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44333
* ar71xx: Revert "added board support for compex wpj558"John Crispin2015-02-021-1/+0
| | | | | | | | This reverts commit f7873071561d82e75ba2dc46433a2982fef8ac6f. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44245
* added board support for compex wpj558John Crispin2015-02-021-0/+1
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 44237
* ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633)John Crispin2015-01-301-0/+4
| | | | | | | | | | | The board is already supported by OpenWrt. WNR1000v2/WNR1000v2-VC are pretty much the same as WNR2000v3/WNR612v2, therefore the same initialization code and flash layout is used. Signed-off-by: Ștefan Rusu <saltwaterc@gmail.com> Tested-by: Douglas Fraser <1dsfraser@gmail.com> SVN-Revision: 44221
* ar8216: prefix mii_xxx functions to avoid kernel namespace pollutionFelix Fietkau2015-01-243-18/+18
| | | | | | | | | Prefix the exported mii_xxx32 functions with ar8xxx_ to avoid kernel namespace pollution. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44105
* ar8216: add swconfig attribute to display ARL table on AR8327/AR8337Felix Fietkau2015-01-244-15/+220
| | | | | | | | | | | | | | Add global read-only swconfig attribute "arl_table" to display the address resolution table. So far the chip-specific part is implemented for AR8327/AR8337 only as I don't have the datasheets for the other AR8XXX chips. Successfully tested on TL-WDR4300 (AR8327rev2) and TL-WDR4900 (AR8327rev4). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44104
* ar8216: decrease page switch wait timeFelix Fietkau2015-01-242-3/+9
| | | | | | | | | | | | | | | | | | | | | | Until a few years ago the page switch wait time was set to msleep(1) what was changed to usleep_range(1000, 2000) later. I can not imagine that a low-level operation like switching page on register level takes so much time. Most likely the value of 1ms was initially set to check whether it fixes an issue and then remained w/o further checking whether also a smaller value would be sufficient. Now the wait time is set to 5us and I successfully tested this on AR8327. IMHO 5us should be plenty of time for all supported chips. However I couldn't test this due to missing hardware. If other chips should need a longer wait time we can add the wait time as a parameter to the ar8xxx_chip struct. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44103
* ar8216: add link change detection for switch portsFelix Fietkau2015-01-242-0/+36
| | | | | | | | | | Check for switch port link changes and - flush ATU in case of a change - report link change via syslog Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44102
* ar8216: fix ATU flushingFelix Fietkau2015-01-242-9/+5
| | | | | | | | | | | | | | | | | | The functionality to flush the address translation table contains two bugs which luckily compensate each other. 1. Just setting the operation is not sufficient to perform the flushing. The "active" bit needs to be set to actually trigger an action. For the vtu operations this is implemented correctly. 2. ar8xxx_phy_read_status is called every 2s by the phy state machine to check for link changes. This would have caused an ATU flush every 2s. Fix the chip-specific ATU flush functions and remove the ATU flush call from ar8xxx_phy_read_status. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44101
* ar8216: display flow control info in swconfig get_link in case of ↵Felix Fietkau2015-01-182-1/+19
| | | | | | | | | | | | | | | | | | autonegatiation too The swconfig get_link attribute (at least) on AR8327/AR8337 doesn't consider the autonegotiated flow control. AR8327/AR8337 provide the info about autonegotiated rx/tx flow control in bits 10 and 11 of the port status register. Use these values to display info about autonegotiated rx/tx flow control as part of the get_link attribute. Successfully tested on TL-WDR4900 (AR8327 rev.4) and TL-WDR4300 (AR8327 rev.2). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44023
* ar8216: add 802.3az EEE info to swconfig get_link attributeFelix Fietkau2015-01-185-1/+49
| | | | | | | | | | | | | AR8327/AR8337 allow to read the result of EEE autonegotiation. If EEE is autonegotiated between the link partners, display this as part of the swconfig get_link attribute. eee100: 100MBit EEE supported by both link partners eee1000: 1GBit EEE supported by both link partners Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44022
* ar8216: introduce enable_eee swconfig attribute to control 802.3az EEE per portFelix Fietkau2015-01-184-17/+122
| | | | | | | | | | | | | | | | Users reported network issues with AR8327 which turned out to be caused by EEE not working correctly with certain link partners (ticket 14597). The workaround was to disable EEE on all ports (changeset 41577). The issue was with certain link partners only, therefore this patch allows to control usage of EEE per port via swconfig. Still the default is to initially disable EEE on all ports. Successfully tested on a TL-WDR4900 (AR8327 rev.4) Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44021
* ar8216: introduce ar8xxx_reg_clear complementing ar8xxx_reg_setJohn Crispin2015-01-173-12/+14
| | | | | | | | Introduce ar8xxx_reg_clear complementing ar8xxx_reg_set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44004
* ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriateJohn Crispin2015-01-172-12/+7
| | | | | | | | Replace ar8xxx_rmw with ar8xxx_reg_set where appropriate. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44003
* ar8216: define all switch_addr structs as constJohn Crispin2015-01-172-6/+6
| | | | | | | | Define all switch_addr structs as const. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44002
* mvsw61xx: track and set per-VLAN port state in STULuka Perkov2015-01-112-7/+32
| | | | | | | | | | Since the driver doesn't know anything about (M)STP we just hard-set the ports to be enabled if they are part of the VLAN. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43938
* mvsw61xx: clean up and expand register definitionsLuka Perkov2015-01-112-29/+50
| | | | | | | | | | | | | | | | - eliminate MV_CPUPORT; not necessary since we define the CPU port(s) via Device Tree - add STU and expand VTU operations - update register names to match those of 88E61xx rather than mvswitch's 88E6060 - use more consistent formatting Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43937
* mvsw61xx: rework chip recognitionLuka Perkov2015-01-112-10/+31
| | | | | | | | Recognizes 88E6171/6172/6176 at the moment. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43936
* mvsw6171: rename to 'mvsw61xx'Luka Perkov2015-01-112-129/+129
| | | | | | | | | In preparation for properly supporting switches beyond the 88E6171. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43935
* ar8216: factor out AR8327/AR8337-specific driver code into ar8327.cFelix Fietkau2015-01-053-1030/+1134
| | | | | | | | | | Move all AR8327/AR8337-specific driver code into a separate source file ar8327.c and adjust patches so that ar8327.c is compiled if CONFIG_AR8216_PHY is set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43845
* ar8216: move definitions from ar8216.c to ar8216.h and introduce ar8327.hFelix Fietkau2015-01-053-345/+365
| | | | | | | | | | Move several structure definitions and #defines from ar8216.c to ar8216.h and move AR8327/AR8337 header stuff into a new header file ar8327.h. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43844
* kernel: add mtd split support for trx imagesFelix Fietkau2015-01-023-0/+153
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43809
* kernel: add a mtdsplit implementation for tp-link firmware headersFelix Fietkau2015-01-023-0/+175
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43806