aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/files/include
Commit message (Collapse)AuthorAgeFilesLines
* kernel: move mediatek BMT support patch to generic patchesFelix Fietkau2022-01-131-0/+18
| | | | | | | Preparation for supporting BMT on MT7621. Move source files to the files/ subdirectory in order to simplify maintenance Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: convert UniFi Outdoor+ HSR support to OFDavid Bauer2021-02-011-2/+0
| | | | | | | | Enable support for the Ubiquiti UniFi Outdoor+ RF filter via device-tree. The old way of using platform data is not required anymore, as it was only used on the now removed ar71xx target. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: mtdsplit_uimage: replace "edimax, uimage" parserBjørn Mork2021-01-221-0/+2
| | | | | | | | The "edimax,uimage"" parser can be replaced by the generic parser using device specific openwrt,partition-magic and openwrt,offset properties. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* kernel: mtdsplit_uimage: replace "openwrt, okli" parserBjørn Mork2021-01-221-0/+5
| | | | | | | | | The only difference between the "openwrt,okli" and the generic parser is the magic. Set this in device tree for all affected devices and remove the "openwrt,okli" parser. Tested-by: Michael Pratt <mcpratt@protonmail.com> # EAP300 v2, ENS202EXT and ENH202 Signed-off-by: Bjørn Mork <bjorn@mork.no>
* dt-bindings: mtd: partitions: add OpenWrt defined U-Boot ImageBjørn Mork2021-01-221-0/+191
| | | | | | | Add devicetree bindings for vendor specific variants of U-Boot Images, as defined by OpenWrt. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* kernel: rtl8367b: fix external interface modesINAGAKI Hiroshi2020-06-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The interface mode number of RGMII_33V is 7 on RTL8367, but it's 9 on RTL8367B. the external interface modes for RTL8367 are follows: - 0, Disabled - 1, RGMII - 2, MII_MAC - 3, MII_PHY - 4, TMII_MAC - 5, TMII_PHY - 6, GMII - 7, RGMII_33V the external interface modes for RTL8367B are follows: - 0, Disabled - 1, RGMII - 2, MII_MAC - 3, MII_PHY - 4, TMII_MAC - 5, TMII_PHY - 6, GMII - 7, RMII_MAC - 8, RMII_PHY - 9, RGMII_33V But the driver in U-Boot of RT-N56U GPL tar blocks using RGMII_33V (9) mode and it seems to be unsupported on RTL8367B, so drop it from switch-case in rtl8367b_extif_set_mode. ref (RTL8367): - TL-WR2453ND v1 ref (RTL8367B): - ASUS RT-N56U - TP-Link Archer C2 v1 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: Move modifications of b53.h into patchHauke Mehrtens2018-12-151-36/+0
| | | | | | | | | | The b53 driver was added as a dsa driver into the mainline Linux kernel, but we still use the swconfig based driver. The header file b53.h is used by both drivers, but the swconfig one needs an extra member, add this one in a patch to not overwrite the version shipped with the mainline kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add reset control support to rtl8366 driverJohn Crispin2018-05-241-1/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* generic: make switch_port_stats tx/rx_bytes long longThibaut VARENE2017-09-011-2/+2
| | | | | | | | | | | | | | This generic structure defines tx_bytes and rx_bytes as unsigned long (u32), while several devices would typically report unsigned long long (u64). The code can work as is, but there's a chance that with a sufficiently fast interface the overflow might happen too fast to be correctly noticed by the consumers of this data. This patch makes both field unsigned long long and updates the only known consumer of this data: swconfig_leds.c Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* brcm47xx: resolve GPIO conflict for WRT54GSv1Mirko Parthey2017-07-021-1/+0
| | | | | | | | | | | | | | | On the Linksys WRT54GSv1, the adm6996 switch driver and the gpio_button_hotplug module both claim GPIO 6, which is connected to the Reset button. When the switch driver's request wins, the Reset button cannot work. This makes it impossible to enter failsafe mode without a serial console. Stop requesting the "adm_rc" GPIO in the switch driver, since it is not used anywhere. Fixes FS#792. Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
* ath9k: drop obsolete patchMathias Kresin2017-04-081-1/+0
| | | | | | | Now that the wireless LEDs are added via platform leds this patch isn't required any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* net: ar8216: address security vulnerabilities in swconfig & ar8216Pavel Kubelun2016-12-011-6/+6
| | | | | | | | | | | | | | | | | | | | | | | Imported from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/e1aaf7ec008a97311867f0a7d0418e4693fecfd4%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: net: ar8216: address security vulnerabilities in swconfig & ar8216 This patch does the following changes: *address the security vulnerabilities in both swconfig framework and in ar8216 driver (many bound check additions, and turned swconfig structure signed element into unsigned when applicable) *address a couple of whitespaces and indendation issues BUG=chrome-os-partner:33096 TEST=none Change-Id: I94ea78fcce8c1932cc584d1508c6e3b5dfb93ce9 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/236490 Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Commit-Queue: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* ath9k: add support for the HSR tuner of the Ubiquiti UAP Outdoor+Matthias Schiffer2016-11-151-0/+2
| | | | | | | | Without setting the HSR to the selected channel, the WLAN of the UAP Outdoor+ will exhibit high packet loss in RX. Based-on-patch-by: Stefan Rompf <stefan@loplof.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: rt2x00: fold patchesMathias Kresin2016-11-091-1/+0
| | | | | | | | The patch 615-rt2x00-fix_20mhz_clk.patch fixes code introduced by 611-rt2x00-rf_vals-rt3352-xtal20.patch and makes the the platform data property clk_is_20mhz obsolete. Signed-off-by: Mathias Kresin <dev@kresin.me>
* swconfig: revert the portmapping patches, they seem to cause a segfaultJohn Crispin2016-08-162-0/+16
| | | | | | | | | | | | Revert "kernel/swconfig: remove obsolete portmapping feature from swconfig" This reverts commit 675407baa44a8700de20b6b2857009a552a807ba. Revert "swconfig: remove obsolete portmapping feature" This reverts commit fca1eb349ef31b133a62880cbd562d6bf17500aa. Signed-off-by: John Crispin <john@phrozen.org>
* kernel/swconfig: remove obsolete portmapping feature from swconfigJohn Crispin2016-08-152-16/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* generic: remove brcmfmac-sdio.hBen Whitten2016-06-081-124/+0
| | | | | | This file is present in the kernel so no point overlaying it. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
* treewide: replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-072-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to wireless-testing 2016-05-12Felix Fietkau2016-05-151-0/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: ath9k: enable GPIO buttonsFelix Fietkau2016-03-051-0/+4
| | | | | | | | | | Enable platform-defined GPIO button support for ath9k device. Key poller is activated for attached platform buttons. Requires ath9k GPIO chip access. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48921
* mac80211: ath9k: enable platform WLAN LED nameFelix Fietkau2016-03-021-0/+1
| | | | | | | | | Enable platform-supplied WLAN LED name for ath9k device. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> Acked-by: Hartmut Knaack <knaack.h@gmx.de> SVN-Revision: 48879
* swconfig: add (PHY) generic helper setting port linkRafał Miłecki2016-02-031-0/+6
| | | | | | | | | | It's quite common for switches to have PHY per port so adding a generic helper setting link state will help many drivers. It just needs an API to access PHYs which this patch also adds. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48621
* swconfig: add API for setting port link speedRafał Miłecki2016-01-061-0/+2
| | | | | | | | | Some switches can force link speed for a port. Let's add API that will allow drivers to export this feature. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48142
* swconfig: add SWITCH_TYPE_LINK and support sending link info to user spaceJohn Crispin2015-12-232-0/+18
| | | | | | | | | | | | | So far we were sending link data as a string. It got some drawbacks: 1) Didn't allow writing clean user space apps reading link state. It was needed to do some screen scraping. 2) Forced whole PORT_LINK communication to be string based. Adding support for *setting* port link required passing string and parting it in the kernel space. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47997
* ar8216: rework/fix AR8337 MAC swap handlingFelix Fietkau2015-12-201-1/+1
| | | | | | | | | | | | | | In r45970 the MAC swap handling was made opt-in, however some boards have been forgotten during the conversion. Since the reference design uses this MAC swapping, and pretty much all known boards using this chip seem to do so too, enabling the swapping is a more reasonable default than leaving it disabled. Change the code to still allow boards to opt-out of this. Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47956
* ath9k: Allow configuration of LED polarity in platform data.John Crispin2015-12-171-0/+1
| | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 47910
* ar8216: Fix problem with AR8337 MAC swap handlingFelix Fietkau2015-06-141-1/+3
| | | | | | | | | | | | | | | | | | | | | AR8337 supports a configuration bit to swap MAC0 and MAC6. Currently this is set in general if an AR8337 is detected and causes issues with devices using an AR8334 (internally an AR8337, just less chip pins). And it might even cause issues with AR8337-based devices with different board designs. Swapping the MAC's however isn't needed for AR8337 in general. It's just needed in case of certain board designs (affected devices seem to be based on Atheros reference board AP135/136-010). Therefore this configuration bit should be moved to platform data. The patch includes the needed changes to the device initialization code of affected devices. Hopefully I didn't miss any .. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 45970
* ar71xx: Revert "added board support for compex wpj558"John Crispin2015-02-021-1/+0
| | | | | | | | This reverts commit f7873071561d82e75ba2dc46433a2982fef8ac6f. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44245
* added board support for compex wpj558John Crispin2015-02-021-0/+1
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 44237
* ar8216: add 802.3az EEE info to swconfig get_link attributeFelix Fietkau2015-01-181-0/+2
| | | | | | | | | | | | | AR8327/AR8337 allow to read the result of EEE autonegotiation. If EEE is autonegotiated between the link partners, display this as part of the swconfig get_link attribute. eee100: 100MBit EEE supported by both link partners eee1000: 1GBit EEE supported by both link partners Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44022
* mac80211: update to wireless-testing 2014-05-19Felix Fietkau2014-05-201-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40800
* generic: ar8216: add custom LED support for the AR8327 switchGabor Juhos2014-01-201-0/+40
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39338
* kernel: define RB_ID_HW_OPTIONS in include/linux/routerboot.hGabor Juhos2013-12-161-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39090
* ath9k: merge initval and tx gain table updates, calibration fixesFelix Fietkau2013-12-081-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 39001
* kernel: adm6996: add support for ADM6996L and GPIO interfaceHauke Mehrtens2013-11-091-0/+30
| | | | | | | | | | | | | | | | | This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. The GPIO bit banging protocol implementation was copied from the old switch driver and adapted to this driver and changed to the mainline kernel GPIO interface. The ADM6996L is different from the ADM6996M which is supported, for both specs are available in the Internet. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38698
* kernel: drop dead pwm codeLuka Perkov2013-08-181-165/+0
| | | | | | | | The files have last been used with 2.6.x kernel. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37810
* kernel: drop dead glamo codeLuka Perkov2013-08-182-62/+0
| | | | | | | | The code is not used since the s3c24xx target was removed. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37809
* kernel: remove gpio_buttonsJonas Gorski2013-07-191-33/+0
| | | | | | | | | | It hasn't been buildable for a long time, and there are no users of it anymore left as all of them have been switched to the upstream accepted version. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37436
* generic: ar8216: allow to specify SGMII config via platform dataGabor Juhos2013-05-301-0/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36798
* generic: ar8216: add get_port_link callbackGabor Juhos2013-05-301-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36797
* kernel: add missing bcma defines and header file for bcrmfmacJonas Gorski2013-04-281-0/+124
| | | | | | | | Fixes build failure when having kmod-mmc and brcmfmac selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36468
* allow loading port maps from OFJohn Crispin2013-04-092-0/+16
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36283
* generic: add b53 swconfig switch driverJonas Gorski2013-01-231-0/+36
| | | | | | | | | | | | | Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports switches connected through MDIO, SPI or memory mapped registers, and supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch chips. Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35305
* generic: ar8216: add sgmii_delay_en field to ar8327_platform_dataGabor Juhos2012-12-251-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34881
* generic: ar8316: allow to configure port 6 via platform data on AR8327Gabor Juhos2012-12-221-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34847
* generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_dataGabor Juhos2012-12-221-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34846
* generic: disintegrate UAPI from include/linux/switch.hGabor Juhos2012-12-142-81/+98
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34677
* mac80211: ath9k: allow to load EEPROM data via firmware APIGabor Juhos2012-12-101-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34606
* mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHzGabor Juhos2012-11-201-0/+1
| | | | | | | | | [juhosg: move ramips specific stuff into a followup patch] Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34269
* generic: allow to disable [25]GHz support in ath9k via platform dataGabor Juhos2012-10-271-0/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33954