aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/files/drivers
Commit message (Collapse)AuthorAgeFilesLines
* mvsw61xx: add support for MV88E6352Imre Kaloz2017-01-132-0/+7
| | | | | | MV88E6352 is used on Linksys WRT3200ACM Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
* generic: ar8216: fix invalid bounds check imported from ChromeOS (FS#347)Jo-Philipp Wich2016-12-231-1/+1
| | | | | | | | The priv->vlan_id member is of size AR8X16_MAX_VLANS, not AR8X16_MAX_PORTS, so check for the proper maximum value in order to avoid capping valid VLAN IDs to 7 (AR8X16_MAX_PORTS - 1). Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: Add support for Netgear WNR2000v1Huan Truong2016-12-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for the WNR2000v1 board with 4MB flash, and produces device-specific factory, rootfs, and sysupgrade files for the WNR2000v1. This board is errorneously claimed as supported on the OpenWRT wiki as AP81, but AP81 image would not work because of APT81 image requiring having 8MB of flash, while WNR2000v1 has only 4MB. The image requires the u-boot bootloader to be modified to fuhry's bootloader first. Short specification: - CPU: Atheros AR9132 - 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps - 4 MB of Flash - 32 MB of RAM - UART header (J1) on board - 1x button Factory/Initial flash instructions: - Set up a TFTP server on your local machine. - Download the uImage for ar71xx-generic and the rootfs image for ar71xx-generic-wnr2000 and save in the tftp server root. - Gain serial access to the router via the UART port (telnetenable over the network only won't work!). - Upgrade the u-boot bootloader to fuhry's version by running the script: http://fuhry.com/b/wnr2000/install-repart.sh - When the router restarts, interrupt u-boot and gain access to u-boot command line. - Repartititon the board and flash initial uImage and rootfs as follow. Commands to type in u-boot: # tells u-boot that we have a tftp server on 192.168.1.10 setenv serverip 192.168.1.10 # tells u-boot that the router should take the address 192.168.1.1 setenv ipaddr 192.168.1.1 # erase the region from 0x050000-0x3f0000 erase 0xbf050000 +0x3A0000 # loads sqfs.bin on TFTP server, and put it to memory address 0x81000000 tftpboot 0x81000000 sqfs.bin # it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ # copy bit by bit 0xZZZZZZ bytes from offset 0x050000 cp.b 0x81000000 0xbf050000 0xZZZZZZ # same to the uImage.bin, write it right next to sqfs.bin # again, 0xYYYYYY is the length that tftpboot reports tftpboot 0x81000000 uImage.bin cp.b 0x81000000 0xbf2a0000 0xYYYYYY # We need to tell the kernel what board it is booting into, and where to find the partitions setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd" # Tell u-boot where to find the uImage setenv bootcmd "bootm 0xbf2a0000" # Tell u-boot to save parameters to the u-boot-env partitions saveenv # Reset the board reset Tested on: - WNR2000v1 board. - Initial flash works. Known bugs: - I don't know why factory image doesn't work on initial flash on stock firmware in u-boot recovery mode while it should. - Sysupgrade does not yet work, if you do -f it will mess up your installation (requiring a reinstall of sqfs and uImage). Signed-off-by: Huan Truong <htruong@tnhh.net>
* net: ar8327: modify some configuration of switchPavel Kubelun2016-12-012-4/+13
| | | | | | | | | | | | | | | | Imported from https://source.codeaurora.org/quic/qsdk/system/openwrt/commit/?h=korg/linux-3.4.y/release/arugula_bb_cs&id=2be4f8a8b205ae1a37db44839864451ebe893e6e Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> Enable flow control of LAN and WAN ports to get better performance. Setup pvid as 0 for all ports during initialisation to avoid confusion during system or switch INIT. Disable PORT MAC before config MAC to avoid it work abnormal. This change is for IR-054144, IR-057315. Change-Id: I345f3dffa59ad3f97150e09692723da12a7b1067 Signed-off-by: Zou Shunxiang <shunxian@codeaurora.org> Signed-off-by: xiaofeis <xiaofeis@codeaurora.org>
* net: ar8216: address security vulnerabilities in swconfig & ar8216Pavel Kubelun2016-12-012-7/+26
| | | | | | | | | | | | | | | | | | | | | | | Imported from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/e1aaf7ec008a97311867f0a7d0418e4693fecfd4%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: net: ar8216: address security vulnerabilities in swconfig & ar8216 This patch does the following changes: *address the security vulnerabilities in both swconfig framework and in ar8216 driver (many bound check additions, and turned swconfig structure signed element into unsigned when applicable) *address a couple of whitespaces and indendation issues BUG=chrome-os-partner:33096 TEST=none Change-Id: I94ea78fcce8c1932cc584d1508c6e3b5dfb93ce9 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/236490 Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Commit-Queue: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8216: prevent device duplication in ar8xxx_dev_listPavel Kubelun2016-12-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/fd7b89dd464a4afffa04ff2e17c771dfe95668cf%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: prevent device duplication in ar8xxx_dev_list If probe is called twice, once for PHY0 and a second time for PHY4, the same switch device will be added twice to ar8xxx_dev_list, while supposedly this list should have one element per hardware switch present in the system. While no negative impact have been observed, it does happen if a platform instanciates these two PHYs from device-tree, as an example. Change-Id: Iddcbdf7d4adacb0af01975b73f8e56b4582e894e Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/234790 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8216: hold ar8xxx_dev_list_lock during use_count--Pavel Kubelun2016-12-011-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/c3fd96a7b87da23979d8569ce45447f8419ca303%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: hold ar8xxx_dev_list_lock during use_count-- It is possible for the remove() callback to run twice in parallel, which could result into --use_count returning only 1 in both cases and the rest of the unregistration path to never be reached. This case has never been observed in practice, but we will fix preventively to make the code more robust. BUG=chrome-os-partner:33096 TEST=none Change-Id: If09abe27fdb2037f514f8674418bafaab3cbdef6 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232870 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8327: replace sprintf() by scnprintf()Pavel Kubelun2016-12-011-2/+1
| | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/fd0c41c7b9327ce003f44df38ce42556fb177b17%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: replace sprintf() by scnprintf() BUG=chrome-os-partner:33096 TEST=none Change-Id: Ib82035c9f2769a86d3e90f9573a09e5700ff5676 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232829 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8327: remove unnecessary spinlocksPavel Kubelun2016-12-011-4/+0
| | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/541c15f8dd02ddce07e0a462a0c2572d8398bccc%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: remove unnecessary spinlocks BUG=chrome-os-partner:33096 TEST=none Change-Id: Ia1b51258504501863fd3298717cc923a1baf34ca Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232828 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8216: sync mib_work cancellationPavel Kubelun2016-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/c05af20272059e149e2da2e1fa1fbd90c03ec979 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: sync mib_work cancellation ar8xxx_mib_stop() is called from ar8xxx_phy_remove(), so we want to make sure the work doesn't run after priv is freed / the device ceases to exist. BUG=chrome-os-partner:33096 TEST=none Change-Id: Iafb44ce93a87433adc4576e5fea5fda58d1f43a9 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232827 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* kernel: rtl8367(b): fix build errorMathias Kresin2016-11-192-2/+2
| | | | | | | | | | Fix build on targets not using CONFIG_MODULE_STRIPPED. Neither RTL8367_DRIVER_DESC nor RTL8367B_DRIVER_DESC are defined anywhere. It worked for targets using CONFIG_MODULE_STRIPPED since our module stripper no-ops the various module info macros. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: mtdsplit: add support for WRGG imagesStijn Tintel2016-10-273-0/+115
| | | | | | | | Support splitting WRGG images, found in some D-Link devices (e.g. DAP-2695). Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* kernel: drop usbdev LED triggerRafał Miłecki2016-10-191-371/+0
| | | | | | It was LEDE's trigger that was replaced by upstream usbport one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: ar8216: improve ar8xxx_is_possible checkChristian Lamparter2016-10-151-6/+6
| | | | | | | | | | | | | | | | | The commit "generic: ar8216: add sanity check to ar8216_probe" (774da6c7a40320a320b28d71291c0e61fcf7bc8a) stated that PHY IDs should be checked at address 0-4. However, the PHY 4 was never check by the loop. This patch extends the check to be similar to the Atheors SDK. It tries all 4 ports and skips unconnected PHYs if necessary. If it cannot find any familiar PHYs, it will prevent the phy driver from initializing. This patch is necessary for the C-60. It doesn't have a PHY at port 3, so this caused the check in ar8xxx_is_possible to fail. As a result, the ethernet ports on the C-60 didn't work. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: mtdsplit_uimage: fix Edimax parserMathias Kresin2016-10-151-13/+7
| | | | | | | | | | | | | | According to the author the code was added to in preparation for adding support for a new board. The patch for the board was never send and the code never really tested. The edimax header starting with the edimax magic is put in front of the uImage header. There is no special uImage header used. Means, default magic and the type field is set to kernel as usual. Signed-off-by: Mathias Kresin <dev@kresin.me> edimax parser fix
* kernel: mtdsplit_uimage: fix rootfs offsetMathias Kresin2016-10-151-1/+1
| | | | | | | | The return value of the find_header function need to be added to the uimage_size, otherwise mtd_find_rootfs_from() might search for a rootfs within a custom header and fails. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mvsw61xx: enable SerDes on 6176 if requiredJonas Gorski2016-09-262-0/+59
| | | | | | | | If the cpu port is connected through SGMII we need to enable SerDes for it to work. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Felix Fietkau <nbd@nbd.name>
* mvsw61xx: reset phys on probe to enable switch ports on clearfog proJonas Gorski2016-09-262-1/+54
| | | | | | | | The clearfog u-boot does not initialize the switch at all, so we need to power up the phys ourselves. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Felix Fietkau <nbd@nbd.name>
* kernel: owl-loader for delayed Atheros ath9k fixupChristian Lamparter2016-09-191-0/+246
| | | | | | | | | | | | | | | | | | | | | | | | | Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway) need to be able to initialize the PCIe wifi device. Normally, this is done during the early stages of booting linux, because the necessary init code is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup. However,this isn't possible for devices which have the init code for the Atheros chip stored on NAND in an UBI volume. Hence, this module can be used to initialze the chip when the user-space is ready to extract the init code. Martin Blumenstingl made a few fixes and added support for lantiq: kernel: owl-loader: add support for OWL emulation PCI devices kernel: owl-loader: don't re-scan the bus when ath9k_pci_fixup failed kernel: owl-loader: use dev_* instead of pr_* logging functions kernel: owl-loader: auto-generate the eeprom filename as fallback kernel: owl-loader: add a debug message when swapping the eeprom data kernel: owl-loader: add missing newlines in log messages kernel: owl-loader: add support for the lantiq platform These patches have been integrated. Thanks! Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* kernel: b53: force BCM531x5 port 5 link state if enabledRafał Miłecki2016-09-081-0/+13
| | | | | | | | | | | Some devices (e.g. Tenda AC9 based on BCM47189B0) have BCM53125 with port 5 connected to the second Ethernet interface on the SoC. In such case there is no PHY and we need to force link manually. This assumes port 5 can be marked as enabled for such devices. It's not implemented yet unfortunately. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* swconfig: revert the portmapping patches, they seem to cause a segfaultJohn Crispin2016-08-161-0/+76
| | | | | | | | | | | | Revert "kernel/swconfig: remove obsolete portmapping feature from swconfig" This reverts commit 675407baa44a8700de20b6b2857009a552a807ba. Revert "swconfig: remove obsolete portmapping feature" This reverts commit fca1eb349ef31b133a62880cbd562d6bf17500aa. Signed-off-by: John Crispin <john@phrozen.org>
* kernel/swconfig: remove obsolete portmapping feature from swconfigJohn Crispin2016-08-151-76/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: adm6996: set carrier statusMathias Kresin2016-08-101-0/+5
| | | | | | | Due to the missing carrier status set, the interface wasn't usable on a BTHOMEHUB2B after ip link down and up as it is done in preinit. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: remove unused morse led trigger driverFelix Fietkau2016-08-041-366/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: silence a false positive uninitialized variable warningFelix Fietkau2016-08-011-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* b53: allow ports with higher numbers than CPU portRafał Miłecki2016-07-241-2/+1
| | | | | | | | | | | | | | Our code was assuming CPU port uses the highest number. My BCM53573 device has eth0 connected to port 8 and eth1 connected to port 5. While working on support for it I tried to: 1) Enable all ports (including port 8) 2) Set CPU port to 5 I noticed port 8 is not accessible anymore. It was just a development process but it seems like something worth fixing anyway. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
* ledtrig-usbdev: fix duplicate match detectionFelix Fietkau2016-07-231-4/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ledtrig-usbdev: use upstream function for iterating USB devicesRafał Miłecki2016-07-201-5/+27
| | | | | | This will allow us to drop LEDE patch adding usb_find_device_by_name. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* kernel: rename B53 symbols to avoid upstream kernel conflictRafał Miłecki2016-06-202-18/+18
| | | | | | | | | In kernel 4.7 there is upstreamed b53 driver using (mostly?) the same symbols as our b53 does. Change our symbols so both drivers can coexist in kernel tree. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
* kernel: mtdsplit: calculate kernel partition precisely for SeamaRafał Miłecki2016-06-201-2/+2
| | | | | | | | | So far "kernel" partition didn't contain just a kernel. It also included Seama header and meta data. This was making kernel update complex and it wasn't trivial to read kernel size. Fix it by making "kernel" parition contain just a kernel image. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* kernel: require admin permissions for swconfig set operationsFelix Fietkau2016-06-121-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: deny swconfig set requests for unprivileged usersJo-Philipp Wich2016-06-111-0/+3
| | | | | | | | | | | | | | | | | The swconfig kernel infrastructure fails to do any permissions checks when changing settings. As such an ordinary user account on a device with a switch can change switch settings without any special permissions. Routers generally have few non-admin users so this isn't a big hole, but it is a security hole. Likely the greatest danger is for multifunction devices which have a lot of extra daemons, compromising a low-security daemon would allow one to modify switch settings and cause the router/switch to appear to lock-up (or cause other sorts of troublesome nyetwork behavior). Implement a check for CAP_NET_ADMIN in swconfig_set_attr() and deny any requests originating from user contexts lacking this capability. Reported-by: Elliott Mitchell <ehem+openwrt@m5p.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* treewide: replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-0718-20/+20
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* AR8216: improve mmd register accessJohn Crispin2016-03-043-13/+17
| | | | | | | | | | | Combine all bus operations for one MMD access in one function. Protecting all these bus operations with one lock also helps to avoid potential issues due to bus operations intercepting the register and data write. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48914
* AR8216: make ARL age time configurableJohn Crispin2016-03-044-4/+80
| | | | | | | | | | | | | | | | | The default TTL for address resolution table entries is 5 minutes for all members of the AR8216 family. This can cause issues if e.g. Wifi clients roam to another AP and their MAC appears on another switch port suddenly. Then the client may not be reachable until the old ARL entry expires. I would have expected the switch to invalidate old entries if it detects the same MAC on another port. But that's not the case. Therefore make the TTL for ARL entries configurable. The effective TTL will always be a multiple of 7 seconds. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48913
* AR8216: remove redundant port number in MIB header lineJohn Crispin2016-03-041-2/+1
| | | | | | | | | The line before includes the port number anyway so there's no need to duplicate the port number in the MIB info header. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48912
* AR8216: complement MIB counters with info in GiB / MiB / KiBJohn Crispin2016-03-041-5/+40
| | | | | | | | | | The decimal values especially for TxByte and RxGoodByte are hard to read once bigger amounts of data have been transferred. Therefore complement the decimal values with info in GiB / MiB / KiB. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48911
* AR8216: don't display MIB counters if all are emptyJohn Crispin2016-03-041-1/+8
| | | | | | | | | | | | For unused switch ports all MIB values are zero. Displaying ~40 empty MIB counters is just confusing and makes it hard to read the output of swconfig dev <dev> show. Therefore, if all MIB counters for a port are zero, just display an info that the MIB counters are empty. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48910
* switch: allow Ethernet port LEDs to show specific port speeds onlyFelix Fietkau2016-02-251-5/+99
| | | | | | | | | | | | | This patch adds speed_mask special file to LEDs connected to switch ports via 'switch' trigger. It allows to choose which speeds to signal when link is up. If router has more than one LED per port, they may light up differently depending on how fast connection is. Default setting is 'all speeds' so backward compatibility with system scripts (for example uci) is maintained. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48775
* switch: make LED port_mask file write handler use kstrtoul() functionFelix Fietkau2016-02-251-25/+16
| | | | | | | | | | | This patch changes swconfig_trig_port_mask_store() handler to utilize kstrtoul() function instead of call to obsolete simple_strtoul(). Thanks to this change, new handler takes less memory and makes port_mask special file accept not only hexadecimal, but also decimal and octal numbers. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48774
* kernel: mtdsplit: support uimage with UBIRafał Miłecki2016-02-241-3/+7
| | | | | | | | This patch adds uimage firmware split support for ubi. Signed-off-by: YounJae Rho <luxflow@live.com> SVN-Revision: 48755
* kernel: mtdsplit: add missing digest field to Seama headerRafał Miłecki2016-02-231-0/+1
| | | | | | | | | | | | | | | | | | | Seama format has 2 similar headers: container (seal) header and entity header. The first one has size always set to 0 and doesn't contain MD5 digest. When dealing with Seama on a flash we deal directly with an entity. You can see mtdsplit_parse_seama reads from offset 0 and expects entity to be there. Seama container is used by bootloader / interface only which extract entity out of it and flash it. That said we should fix our header struct. This is important as we calculate possible rootfs offset assuming it may be placed right after Seama entity. So far calculate offset was always 16B too low. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48754
* b53: support setting port linkRafał Miłecki2016-02-031-0/+31
| | | | | | | | | When dealing with Broadcom hardware we can simply use swconfig's generic helper, we just need to do some validation of requested state. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48623
* b53: provide PHY access to swconfigRafał Miłecki2016-02-033-0/+48
| | | | | | | | | Thanks to this change swconfig can access port PHYs e.g. when setting port link state with a generic helper. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48622
* swconfig: add (PHY) generic helper setting port linkRafał Miłecki2016-02-031-0/+36
| | | | | | | | | | It's quite common for switches to have PHY per port so adding a generic helper setting link state will help many drivers. It just needs an API to access PHYs which this patch also adds. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48621
* kernel: mtdsplit: support Seama entity with UBIRafał Miłecki2016-02-012-3/+8
| | | | | | | | | | Some D-Link routers (e.g. DIR-885L) have NAND and use Seama format. It means OpenWrt will want to have UBI in Sseama entity and should be able to detect it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48600
* kernel: mtdsplit: detect UBI partition when looking for rootfsRafał Miłecki2016-02-012-0/+7
| | | | | | | | | This allows mtdsplit parsers work with UBI which is very popular on NAND flases. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48599
* kernel: mtdsplit: modify rootfs helpers to provide partition typeRafał Miłecki2016-02-019-26/+42
| | | | | | | | | | Our mtdsplit parsers may want to create partition with name choice based on partition file system (e.g. SquashFS vs. JFFS2). This patch allows passing extra argument pointing to variable that will be set properly. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48598
* kernel: mtdsplit: document Seama splitter a bitRafał Miłecki2016-01-251-8/+10
| | | | | | | | | | Rename kernel_size variable as it includes whole entity size, not just a kernel size. Also update comments to match it and describe better what are we checking/looking for. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48480
* swconfig: simplify init codeJonas Gorski2016-01-241-6/+1
| | | | | | | | | Directly return the return value of genl_register_family_with_ops() instead of storing it in a temporary variable, then returning it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48472
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 16:49:41 +0000