aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/base-files
Commit message (Expand)AuthorAgeFilesLines
* update the /init file to start /sbin/initJohn Crispin2013-03-131-94/+2
* Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functio...Mirko Vogt2012-12-191-1/+1
* Do not overload mount-call - trying to reduce confusionMirko Vogt2012-12-191-12/+12
* initramfs: allow preinit to enable switching from initramfs to tmpfs to allow...Felix Fietkau2011-08-111-0/+13
* rename target/linux/generic-2.6 to genericFelix Fietkau2010-06-261-0/+83
>61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005
From c6de6de7d3df13822872ac756eebe868d236297a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 22 Sep 2015 20:52:18 +0100
Subject: [PATCH 718/744] phylink: add phylink infrastructure

The link between the ethernet MAC and its PHY has become more complex
as the interface evolves.  This is especially true with serdes links,
where the part of the PHY is effectively integrated into the MAC.

Serdes links can be connected to a variety of devices, including SFF
modules soldered down onto the board with the MAC, a SFP cage with
a hotpluggable SFP module which may contain a PHY or directly modulate
the serdes signals onto optical media with or without a PHY, or even
a classical PHY connection.

Moreover, the negotiation information on serdes links comes in two
varieties - SGMII mode, where the PHY provides its speed/duplex/flow
control information to the MAC, and 1000base-X mode where both ends
exchange their abilities and each resolve the link capabilities.

This means we need a more flexible means to support these arrangements,
particularly with the hotpluggable nature of SFP, where the PHY can
be attached or detached after the network device has been brought up.

Ethtool information can come from multiple sources:
- we may have a PHY operating in either SGMII or 1000base-X mode, in
  which case we take ethtool/mii data directly from the PHY.
- we may have a optical SFP module without a PHY, with the MAC
  operating in 1000base-X mode - the ethtool/mii data needs to come
  from the MAC.
- we may have a copper SFP module with a PHY whic can't be accessed,
  which means we need to take ethtool/mii data from the MAC.

Phylink aims to solve this by providing an intermediary between the
MAC and PHY, providing a safe way for PHYs to be hotplugged, and
allowing a SFP driver to reconfigure the serdes connection.

Phylink also takes over support of fixed link connections, where
the speed/duplex/flow control are fixed, but link status may be
controlled by a GPIO signal.  By avoiding the fixed-phy implementation,
phylink can provide a faster response to link events: fixed-phy has
to wait for phylib to operate its state machine, which can take
several seconds.  In comparison, phylink takes milliseconds.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/net/phy/Kconfig      |  10 +
 drivers/net/phy/Makefile     |   1 +
 drivers/net/phy/phy_device.c |   1 +
 drivers/net/phy/phylink.c    | 816 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/phy.h          |   2 +
 include/linux/phylink.h      |  70 ++++
 6 files changed, 900 insertions(+)
 create mode 100644 drivers/net/phy/phylink.c
 create mode 100644 include/linux/phylink.h

--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -10,6 +10,16 @@ menuconfig PHYLIB
 	  devices.  This option provides infrastructure for
 	  managing PHY devices.
 
+config PHYLINK
+	tristate
+	depends on NETDEVICES
+	select PHYLIB
+	select SWPHY
+	help
+	  PHYlink models the link between the PHY and MAC, allowing fixed
+	  configuration links, PHYs, and Serdes links with MAC level
+	  autonegotiation modes.
+
 if PHYLIB
 
 config MDIO_BOARDINFO
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -5,6 +5,7 @@ libphy-$(CONFIG_SWPHY)		+= swphy.o
 
 obj-$(CONFIG_MDIO_BOARDINFO)	+= mdio-boardinfo.o
 
+obj-$(CONFIG_PHYLINK)		+= phylink.o
 obj-$(CONFIG_PHYLIB)		+= libphy.o
 obj-$(CONFIG_SWCONFIG)		+= swconfig.o
 obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -754,6 +754,7 @@ void phy_detach(struct phy_device *phyde
 	phydev->attached_dev->phydev = NULL;
 	phydev->attached_dev = NULL;
 	phy_suspend(phydev);
+	phydev->phylink = NULL;
 
 	/* If the device had no specific driver before (i.e. - it
 	 * was using the generic driver), we unbind the device
--- /dev/null
+++ b/drivers/net/phy/phylink.c
@@ -0,0 +1,816 @@
+/*
+ * phylink models the MAC to optional PHY connection, supporting
+ * technologies such as SFP cages where the PHY is hot-pluggable.
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/ethtool.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/phylink.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include "swphy.h"
+
+#define SUPPORTED_INTERFACES \
+	(SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE | \
+	 SUPPORTED_BNC | SUPPORTED_AUI | SUPPORTED_Backplane)
+#define ADVERTISED_INTERFACES \
+	(ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \
+	 ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane)
+
+enum {
+	PHYLINK_DISABLE_STOPPED,
+};
+
+struct phylink {
+	struct net_device *netdev;
+	const struct phylink_mac_ops *ops;
+	struct mutex config_mutex;
+
+	unsigned long phylink_disable_state; /* bitmask of disables */
+	struct phy_device *phydev;
+	phy_interface_t link_interface;	/* PHY_INTERFACE_xxx */
+	u8 link_an_mode;		/* MLO_AN_xxx */
+	u8 link_port;			/* The current non-phy ethtool port */
+	u32 link_port_support;		/* SUPPORTED_xxx ethtool for ports */
+
+	/* The link configuration settings */
+	struct phylink_link_state link_config;
+	struct gpio_desc *link_gpio;
+
+	struct mutex state_mutex;	/* may be taken within config_mutex */
+	struct phylink_link_state phy_state;
+	struct work_struct resolve;
+
+	bool mac_link_up;
+};
+
+static const char *phylink_an_mode_str(unsigned int mode)
+{
+	static const char *modestr[] = {
+		[MLO_AN_PHY] = "phy",
+		[MLO_AN_FIXED] = "fixed",
+		[MLO_AN_SGMII] = "SGMII",
+		[MLO_AN_8023Z] = "802.3z",
+	};
+
+	return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown";
+}
+
+static int phylink_parse_fixedlink(struct phylink *pl, struct device_node *np)
+{
+	struct device_node *fixed_node;
+	int ret, len;
+
+	fixed_node = of_get_child_by_name(np, "fixed-link");
+	if (fixed_node) {
+		struct gpio_desc *desc;
+		u32 speed;
+
+		ret = of_property_read_u32(fixed_node, "speed", &speed);
+
+		pl->link_an_mode = MLO_AN_FIXED;
+		pl->link_config.link = 1;
+		pl->link_config.an_complete = 1;
+		pl->link_config.speed = speed;
+		pl->link_config.duplex = DUPLEX_HALF;
+		pl->link_config.pause = MLO_PAUSE_NONE;
+
+		if (of_property_read_bool(fixed_node, "full-duplex"))
+			pl->link_config.duplex = DUPLEX_FULL;
+		if (of_property_read_bool(fixed_node, "pause"))
+			pl->link_config.pause |= MLO_PAUSE_SYM;
+		if (of_property_read_bool(fixed_node, "asym-pause"))
+			pl->link_config.pause |= MLO_PAUSE_ASYM;
+
+		if (ret == 0) {
+			desc = fwnode_get_named_gpiod(&fixed_node->fwnode,
+						      "link-gpios");
+
+			if (!IS_ERR(desc))
+				pl->link_gpio = desc;
+			else if (desc == ERR_PTR(-EPROBE_DEFER))
+				ret = -EPROBE_DEFER;
+		}
+		of_node_put(fixed_node);
+	} else {
+		const __be32 *fixed_prop;
+
+		fixed_prop = of_get_property(np, "fixed-link", &len);
+		if (fixed_prop && len == 5 * sizeof(*fixed_prop)) {
+			pl->link_config.duplex = be32_to_cpu(fixed_prop[1]) ?
+						DUPLEX_FULL : DUPLEX_HALF;
+			pl->link_config.speed = be32_to_cpu(fixed_prop[2]);
+			pl->link_config.pause = MLO_PAUSE_NONE;
+			if (be32_to_cpu(fixed_prop[3]))
+				pl->link_config.pause |= MLO_PAUSE_SYM;
+			if (be32_to_cpu(fixed_prop[4]))
+				pl->link_config.pause |= MLO_PAUSE_ASYM;
+
+			pl->link_an_mode = MLO_AN_FIXED;
+		}
+		ret = 0;
+	}
+
+	if (pl->link_an_mode == MLO_AN_FIXED) {
+		/* Generate the supported/advertising masks */
+		if (pl->link_config.pause & MLO_PAUSE_SYM) {
+			pl->link_config.supported |= SUPPORTED_Pause;
+			pl->link_config.advertising |= ADVERTISED_Pause;
+		}
+		if (pl->link_config.pause & MLO_PAUSE_ASYM) {
+			pl->link_config.supported |= SUPPORTED_Asym_Pause;
+			pl->link_config.advertising |= ADVERTISED_Asym_Pause;
+		}
+
+		if (pl->link_config.speed > SPEED_1000 &&
+		    pl->link_config.duplex != DUPLEX_FULL)
+			netdev_warn(pl->netdev, "fixed link specifies half duplex for %dMbps link?\n",
+				    pl->link_config.speed);
+
+#define S(spd) \
+	pl->link_config.supported |= pl->link_config.duplex ? \
+		SUPPORTED_##spd##_Full : SUPPORTED_##spd##_Half
+#define A(spd) \
+	pl->link_config.advertising |= pl->link_config.duplex ? \
+		ADVERTISED_##spd##_Full : ADVERTISED_##spd##_Half
+#define C(spd, tech) \
+		case spd: \
+			S(spd##tech); \
+			A(spd##tech); \
+			break
+		switch (pl->link_config.speed) {
+		C(10, baseT);
+		C(100, baseT);
+		C(1000, baseT);
+#undef S
+#undef A
+#define S(spd) pl->link_config.supported |= SUPPORTED_##spd##_Full
+#define A(spd) pl->link_config.advertising |= ADVERTISED_##spd##_Full
+		C(2500, baseX);
+		C(10000, baseT);
+		}
+#undef S
+#undef A
+#undef C
+	}
+	return ret;
+}
+
+static int phylink_parse_managed(struct phylink *pl, struct device_node *np)
+{
+	const char *managed;
+
+	if (of_property_read_string(np, "managed", &managed) == 0 &&
+	    strcmp(managed, "in-band-status") == 0) {
+		if (pl->link_an_mode == MLO_AN_FIXED) {
+			netdev_err(pl->netdev,
+				   "can't use both fixed-link and in-band-status\n");
+			return -EINVAL;
+		}
+		pl->link_an_mode = MLO_AN_SGMII;
+		pl->link_config.an_enabled = true;
+	}
+
+	return 0;
+}
+
+
+static int phylink_get_support(struct phylink *pl, unsigned int mode)
+{
+	struct phylink_link_state state = pl->link_config;
+	int ret;
+
+	ret = pl->ops->mac_get_support(pl->netdev, mode, &state);
+	if (ret == 0) {
+		pl->link_an_mode = mode;
+		pl->link_config = state;
+	}
+
+	return ret;
+}
+
+static void phylink_mac_config(struct phylink *pl,
+			       const struct phylink_link_state *state)
+{
+	pl->ops->mac_config(pl->netdev, pl->link_an_mode, state);
+}
+
+static void phylink_mac_an_restart(struct phylink *pl)
+{
+	if (pl->link_config.an_enabled)
+		pl->ops->mac_an_restart(pl->netdev, pl->link_an_mode);
+}
+
+static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state *state)
+{
+	struct net_device *ndev = pl->netdev;
+
+	state->supported = pl->link_config.supported;
+	state->advertising = pl->link_config.advertising;
+	state->an_enabled = pl->link_config.an_enabled;
+	state->link = 1;
+	state->sync = 1;
+
+	return pl->ops->mac_link_state(ndev, state);
+}
+
+/* The fixed state is... fixed except for the link state,
+ * which may be determined by a GPIO.
+ */
+static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_state *state)
+{
+	*state = pl->link_config;
+	if (pl->link_gpio)
+		state->link = !!gpiod_get_value(pl->link_gpio);
+}
+
+extern const char *phy_speed_to_str(int speed);
+
+static void phylink_resolve(struct work_struct *w)
+{
+	struct phylink *pl = container_of(w, struct phylink, resolve);
+	struct phylink_link_state link_state;
+	struct net_device *ndev = pl->netdev;
+
+	mutex_lock(&pl->state_mutex);
+	if (pl->phylink_disable_state) {
+		link_state.link = false;
+	} else {
+		switch (pl->link_an_mode) {
+		case MLO_AN_PHY:
+			link_state = pl->phy_state;
+			break;
+
+		case MLO_AN_FIXED:
+			phylink_get_fixed_state(pl, &link_state);
+			break;
+
+		case MLO_AN_SGMII:
+			phylink_get_mac_state(pl, &link_state);
+			if (pl->phydev)
+				link_state.link = link_state.link &&
+						  pl->phy_state.link;
+			break;
+
+		case MLO_AN_8023Z:
+			phylink_get_mac_state(pl, &link_state);
+			break;
+		}
+	}
+
+	if (link_state.link != netif_carrier_ok(ndev)) {
+		if (!link_state.link) {
+			netif_carrier_off(ndev);
+			pl->ops->mac_link_down(ndev, pl->link_an_mode);
+			netdev_info(ndev, "Link is Down\n");
+		} else {
+			/* If we have a PHY, we need the MAC updated with
+			 * the current link parameters (eg, in SGMII mode,
+			 * with flow control status.)
+			 */
+			if (pl->phydev)
+				phylink_mac_config(pl, &link_state);
+
+			pl->ops->mac_link_up(ndev, pl->link_an_mode);
+
+			netif_carrier_on(ndev);
+
+			netdev_info(ndev,
+				    "Link is Up - %s/%s - flow control %s\n",
+				    phy_speed_to_str(link_state.speed),
+				    link_state.duplex ? "Full" : "Half",
+				    link_state.pause ? "rx/tx" : "off");
+		}
+	}
+	mutex_unlock(&pl->state_mutex);
+}
+
+static void phylink_run_resolve(struct phylink *pl)
+{
+	if (!pl->phylink_disable_state)
+		queue_work(system_power_efficient_wq, &pl->resolve);
+}
+
+struct phylink *phylink_create(struct net_device *ndev, struct device_node *np,
+	phy_interface_t iface, const struct phylink_mac_ops *ops)
+{
+	struct phylink *pl;
+	int ret;
+
+	pl = kzalloc(sizeof(*pl), GFP_KERNEL);
+	if (!pl)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&pl->state_mutex);
+	mutex_init(&pl->config_mutex);
+	INIT_WORK(&pl->resolve, phylink_resolve);
+	pl->netdev = ndev;
+	pl->link_interface = iface;
+	pl->link_port_support = SUPPORTED_MII;
+	pl->link_port = PORT_MII;
+	pl->ops = ops;
+	__set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+
+	ret = phylink_parse_fixedlink(pl, np);
+	if (ret < 0) {
+		kfree(pl);
+		return ERR_PTR(ret);
+	}
+
+	ret = phylink_parse_managed(pl, np);
+	if (ret < 0) {
+		kfree(pl);
+		return ERR_PTR(ret);
+	}
+
+	ret = phylink_get_support(pl, pl->link_an_mode);
+	if (ret) {
+		kfree(pl);
+		return ERR_PTR(ret);
+	}
+
+	return pl;
+}
+EXPORT_SYMBOL_GPL(phylink_create);
+
+void phylink_destroy(struct phylink *pl)
+{
+	cancel_work_sync(&pl->resolve);
+	kfree(pl);
+}
+EXPORT_SYMBOL_GPL(phylink_destroy);
+
+void phylink_phy_change(struct phy_device *phy, bool up, bool do_carrier)
+{
+	struct phylink *pl = phy->phylink;
+
+	mutex_lock(&pl->state_mutex);
+	pl->phy_state.speed = phy->speed;
+	pl->phy_state.duplex = phy->duplex;
+	pl->phy_state.pause = MLO_PAUSE_NONE;
+	if (phy->pause)
+		pl->phy_state.pause |= MLO_PAUSE_SYM;
+	if (phy->asym_pause)
+		pl->phy_state.pause |= MLO_PAUSE_ASYM;
+	pl->phy_state.link = up;
+	mutex_unlock(&pl->state_mutex);
+
+	phylink_run_resolve(pl);
+
+	netdev_dbg(pl->netdev, "phy link %s\n", up ? "up" : "down");
+}
+
+static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
+{
+	mutex_lock(&pl->config_mutex);
+	phy->phylink = pl;
+	phy->phy_link_change = phylink_phy_change;
+
+	netdev_info(pl->netdev,
+		    "PHY [%s] driver [%s]\n", dev_name(&phy->dev),
+		    phy->drv->name);
+
+	mutex_lock(&pl->state_mutex);
+	pl->phydev = phy;
+
+	/* Restrict the phy advertisment to the union of the PHY and
+	 * MAC-level advert.
+	 */
+	phy->advertising &= ADVERTISED_INTERFACES |
+			    pl->link_config.advertising;
+	mutex_unlock(&pl->state_mutex);
+
+	phy_start_machine(phy);
+	if (phy->irq > 0)
+		phy_start_interrupts(phy);
+
+	mutex_unlock(&pl->config_mutex);
+
+	return 0;
+}
+
+int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
+{
+	int ret;
+
+	ret = phy_attach_direct(pl->netdev, phy, 0, pl->link_interface);
+	if (ret)
+		return ret;
+
+	ret = phylink_bringup_phy(pl, phy);
+	if (ret)
+		phy_detach(phy);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_connect_phy);
+
+int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn)
+{
+	struct device_node *phy_node;
+	struct phy_device *phy_dev;
+	int ret;
+
+	/* Fixed links are handled without needing a PHY */
+	if (pl->link_an_mode == MLO_AN_FIXED)
+		return 0;
+
+	phy_node = of_parse_phandle(dn, "phy-handle", 0);
+	if (!phy_node)
+		phy_node = of_parse_phandle(dn, "phy", 0);
+	if (!phy_node)
+		phy_node = of_parse_phandle(dn, "phy-device", 0);
+
+	if (!phy_node) {
+		if (pl->link_an_mode == MLO_AN_PHY) {
+			netdev_err(pl->netdev, "unable to find PHY node\n");
+			return -ENODEV;
+		}
+		return 0;
+	}
+
+	phy_dev = of_phy_attach(pl->netdev, phy_node, 0, pl->link_interface);
+	/* We're done with the phy_node handle */
+	of_node_put(phy_node);
+
+	if (!phy_dev)
+		return -ENODEV;
+
+	ret = phylink_bringup_phy(pl, phy_dev);
+	if (ret)
+		phy_detach(phy_dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
+
+void phylink_disconnect_phy(struct phylink *pl)
+{
+	struct phy_device *phy;
+
+	mutex_lock(&pl->config_mutex);
+	phy = pl->phydev;
+
+	mutex_lock(&pl->state_mutex);
+	pl->phydev = NULL;
+	mutex_unlock(&pl->state_mutex);
+	flush_work(&pl->resolve);
+
+	if (phy)
+		phy_disconnect(phy);
+
+	mutex_unlock(&pl->config_mutex);
+}
+EXPORT_SYMBOL_GPL(phylink_disconnect_phy);
+
+void phylink_mac_change(struct phylink *pl, bool up)
+{
+	phylink_run_resolve(pl);
+	netdev_dbg(pl->netdev, "mac link %s\n", up ? "up" : "down");
+}
+EXPORT_SYMBOL_GPL(phylink_mac_change);
+
+void phylink_start(struct phylink *pl)
+{
+	mutex_lock(&pl->config_mutex);
+
+	netdev_info(pl->netdev, "configuring for %s link mode\n",
+		    phylink_an_mode_str(pl->link_an_mode));
+
+	/* Apply the link configuration to the MAC when starting. This allows
+	 * a fixed-link to start with the correct parameters, and also
+	 * ensures that we set the appropriate advertisment for Serdes links.
+	 */
+	phylink_mac_config(pl, &pl->link_config);
+
+	clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+	phylink_run_resolve(pl);
+
+	if (pl->phydev)
+		phy_start(pl->phydev);
+
+	mutex_unlock(&pl->config_mutex);
+}
+EXPORT_SYMBOL_GPL(phylink_start);
+
+void phylink_stop(struct phylink *pl)
+{
+	mutex_lock(&pl->config_mutex);
+
+	if (pl->phydev)
+		phy_stop(pl->phydev);
+
+	set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+	flush_work(&pl->resolve);
+
+	pl->mac_link_up = false;
+
+	mutex_unlock(&pl->config_mutex);
+}
+EXPORT_SYMBOL_GPL(phylink_stop);
+
+static void phylink_get_ethtool(const struct phylink_link_state *state,
+				struct ethtool_cmd *cmd)
+{
+	cmd->supported &= SUPPORTED_INTERFACES;
+	cmd->supported |= state->supported;
+	cmd->advertising &= ADVERTISED_INTERFACES;
+	cmd->advertising |= state->advertising;
+	ethtool_cmd_speed_set(cmd, state->speed);
+	cmd->duplex = state->duplex;
+
+	cmd->autoneg = state->an_enabled ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+}
+
+static int phylink_ethtool_gset(struct phylink *pl, struct ethtool_cmd *cmd)
+{
+	struct phylink_link_state link_state;
+	int ret;
+
+	if (pl->phydev) {
+		ret = phy_ethtool_gset(pl->phydev, cmd);
+		if (ret)
+			return ret;
+
+		cmd->supported &= SUPPORTED_INTERFACES |
+				  pl->link_config.supported;
+	} else {
+		cmd->supported = pl->link_port_support;
+		cmd->transceiver = XCVR_EXTERNAL;
+		cmd->port = pl->link_port;
+	}
+
+	switch (pl->link_an_mode) {
+	case MLO_AN_FIXED:
+		/* We are using fixed settings. Report these as the
+		 * current link settings - and note that these also
+		 * represent the supported speeds/duplex/pause modes.
+		 */
+		phylink_get_fixed_state(pl, &link_state);
+		phylink_get_ethtool(&link_state, cmd);
+		break;
+
+	case MLO_AN_SGMII:
+		/* If there is a phy attached, then use the reported
+		 * settings from the phy with no modification.
+		 */
+		if (pl->phydev)
+			break;
+
+	case MLO_AN_8023Z:
+		phylink_get_mac_state(pl, &link_state);
+
+		/* The MAC is reporting the link results from its own PCS
+		 * layer via in-band status. Report these as the current
+		 * link settings.
+		 */
+		phylink_get_ethtool(&link_state, cmd);
+		break;
+	}
+
+	return 0;
+}
+
+int phylink_ethtool_get_settings(struct phylink *pl, struct ethtool_cmd *cmd)
+{
+	int ret;
+
+	mutex_lock(&pl->config_mutex);
+	ret = phylink_ethtool_gset(pl, cmd);
+	mutex_unlock(&pl->config_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_get_settings);
+
+static int phylink_ethtool_sset(struct phylink *pl, struct ethtool_cmd *cmd)
+{
+	u32 supported;
+	int ret;
+
+	/* Calculate the union of the MAC support and attached phy support */
+	supported = pl->link_config.supported;
+	if (pl->phydev)
+		supported &= pl->phydev->supported;
+
+	/* Mask out unsupported advertisments */
+	cmd->advertising &= supported;
+
+	/* FIXME: should we reject autoneg if phy/mac does not support it? */
+
+	if (cmd->autoneg == AUTONEG_DISABLE) {
+		/* Autonegotiation disabled, validate speed and duplex */
+		if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
+			return -EINVAL;
+
+		/* FIXME: validate speed/duplex against supported */
+
+		cmd->advertising &= ~ADVERTISED_Autoneg;
+	} else {
+		/* Autonegotiation enabled, validate advertisment */
+		/* FIXME: shouldn't we ensure there's some duplex/speeds set */
+		if (cmd->advertising == 0)
+			return -EINVAL;
+
+		cmd->advertising |= ADVERTISED_Autoneg;
+	}
+
+	/* If we have a fixed link (as specified by firmware), refuse
+	 * to enable autonegotiation, or change link parameters.
+	 */
+	if (pl->link_an_mode == MLO_AN_FIXED) {
+		if (cmd->autoneg != AUTONEG_DISABLE ||
+		    ethtool_cmd_speed(cmd) != pl->link_config.speed ||
+		    cmd->duplex != pl->link_config.duplex)
+			return -EINVAL;
+	}
+
+	/* If we have a PHY, configure the phy */
+	if (pl->phydev) {
+		ret = phy_ethtool_sset(pl->phydev, cmd);
+		if (ret)
+			return ret;
+	}
+
+	mutex_lock(&pl->state_mutex);
+	/* Configure the MAC to match the new settings */
+	pl->link_config.advertising = cmd->advertising;
+	pl->link_config.speed = cmd->speed;
+	pl->link_config.duplex = cmd->duplex;
+	pl->link_config.an_enabled = cmd->autoneg != AUTONEG_DISABLE;
+
+	phylink_mac_config(pl, &pl->link_config);
+	phylink_mac_an_restart(pl);
+	mutex_unlock(&pl->state_mutex);
+
+	return ret;
+}
+
+int phylink_ethtool_set_settings(struct phylink *pl, struct ethtool_cmd *cmd)
+{
+	int ret;
+
+	if (cmd->autoneg != AUTONEG_DISABLE && cmd->autoneg != AUTONEG_ENABLE)
+		return -EINVAL;
+
+	mutex_lock(&pl->config_mutex);
+	ret = phylink_ethtool_sset(pl, cmd);
+	mutex_unlock(&pl->config_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_set_settings);
+
+/* This emulates MII registers for a fixed-mode phy operating as per the
+ * passed in state. "aneg" defines if we report negotiation is possible.
+ *
+ * FIXME: should deal with negotiation state too.
+ */
+static int phylink_mii_emul_read(struct net_device *ndev, unsigned int reg,
+				 struct phylink_link_state *state, bool aneg)
+{
+	struct fixed_phy_status fs;
+	int val;
+
+	fs.link = state->link;
+	fs.speed = state->speed;
+	fs.duplex = state->duplex;
+	fs.pause = state->pause & MLO_PAUSE_SYM;
+	fs.asym_pause = state->pause & MLO_PAUSE_ASYM;
+
+	val = swphy_read_reg(reg, &fs);
+	if (reg == MII_BMSR) {
+		if (!state->an_complete)
+			val &= ~BMSR_ANEGCOMPLETE;
+		if (!aneg)
+			val &= ~BMSR_ANEGCAPABLE;
+	}
+	return val;
+}
+
+static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
+			    unsigned int reg)
+{
+	struct phylink_link_state state;
+	int val = 0xffff;
+
+	if (pl->phydev && pl->phydev->addr != phy_id)
+		return mdiobus_read(pl->phydev->bus, phy_id, reg);
+
+	if (!pl->phydev && phy_id != 0)
+		return val;
+
+	switch (pl->link_an_mode) {
+	case MLO_AN_FIXED:
+		phylink_get_fixed_state(pl, &state);
+		val = phylink_mii_emul_read(pl->netdev, reg, &state, true);
+		break;
+
+	case MLO_AN_PHY:
+		val = mdiobus_read(pl->phydev->bus, phy_id, reg);
+		break;
+
+	case MLO_AN_SGMII:
+		if (pl->phydev) {
+			val = mdiobus_read(pl->phydev->bus,
+					   pl->phydev->addr, reg);
+			break;
+		}
+		/* No phy, fall through to reading the MAC end */
+	case MLO_AN_8023Z:
+		val = phylink_get_mac_state(pl, &state);
+		if (val < 0)
+			return val;
+
+		val = phylink_mii_emul_read(pl->netdev, reg, &state, true);
+		break;
+	}
+
+	return val & 0xffff;
+}
+
+static void phylink_mii_write(struct phylink *pl, unsigned int phy_id,
+			      unsigned int reg, unsigned int val)
+{
+	if (pl->phydev && pl->phydev->addr != phy_id) {
+		mdiobus_write(pl->phydev->bus, phy_id, reg, val);
+		return;
+	}
+
+	if (!pl->phydev && phy_id != 0)
+		return;
+
+	switch (pl->link_an_mode) {
+	case MLO_AN_FIXED:
+		break;
+
+	case MLO_AN_PHY:
+		mdiobus_write(pl->phydev->bus, pl->phydev->addr,
+			      reg, val);
+		break;
+
+	case MLO_AN_SGMII:
+		if (pl->phydev) {
+			mdiobus_write(pl->phydev->bus, phy_id, reg, val);
+			break;
+		}
+		/* No phy, fall through to reading the MAC end */
+	case MLO_AN_8023Z:
+		break;
+	}
+}
+
+int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
+{
+	struct mii_ioctl_data *mii_data = if_mii(ifr);
+	int val, ret;
+
+	mutex_lock(&pl->config_mutex);
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		mii_data->phy_id = pl->phydev ? pl->phydev->addr : 0;
+		/* fallthrough */
+
+	case SIOCGMIIREG:
+		val = phylink_mii_read(pl, mii_data->phy_id, mii_data->reg_num);
+		if (val < 0) {
+			ret = val;
+		} else {
+			mii_data->val_out = val;
+			ret = 0;
+		}
+		break;
+
+	case SIOCSMIIREG:
+		phylink_mii_write(pl, mii_data->phy_id, mii_data->reg_num,
+				  mii_data->val_in);
+		ret = 0;
+		break;
+
+	default:
+		ret = -EOPNOTSUPP;
+		if (pl->phydev)
+			ret = phy_mii_ioctl(pl->phydev, ifr, cmd);
+		break;
+	}
+
+	mutex_unlock(&pl->config_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
+
+MODULE_LICENSE("GPL");
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -147,6 +147,7 @@ static inline const char *phy_modes(phy_
 #define MII_ADDR_C45 (1<<30)
 
 struct device;
+struct phylink;
 struct sk_buff;
 
 /*
@@ -429,6 +430,7 @@ struct phy_device {
 
 	struct mutex lock;
 
+	struct phylink *phylink;
 	struct net_device *attached_dev;
 
 	u8 mdix;
--- /dev/null
+++ b/include/linux/phylink.h
@@ -0,0 +1,70 @@
+#ifndef NETDEV_PCS_H
+#define NETDEV_PCS_H
+
+#include <linux/phy.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+struct device_node;
+struct ethtool_cmd;
+struct net_device;
+
+enum {
+	MLO_PAUSE_NONE,
+	MLO_PAUSE_ASYM = BIT(0),
+	MLO_PAUSE_SYM = BIT(1),
+
+	MLO_AN_PHY = 0,
+	MLO_AN_FIXED,
+	MLO_AN_SGMII,
+	MLO_AN_8023Z,
+};
+
+struct phylink_link_state {
+	u32 supported;
+	u32 advertising;
+	u32 lp_advertising;
+	int speed;
+	int duplex;
+	int pause;
+	unsigned int link:1;
+	unsigned int sync:1;
+	unsigned int an_enabled:1;
+	unsigned int an_complete:1;
+};
+
+struct phylink_mac_ops {
+	/* Get the ethtool supported mask for the indicated mode */
+	int (*mac_get_support)(struct net_device *, unsigned int mode,
+			       struct phylink_link_state *);
+
+	/* Read the current link state from the hardware */
+	int (*mac_link_state)(struct net_device *, struct phylink_link_state *);
+
+	/* Configure the MAC */
+	void (*mac_config)(struct net_device *, unsigned int mode,
+			   const struct phylink_link_state *);
+	void (*mac_an_restart)(struct net_device *, unsigned int mode);
+
+	void (*mac_link_down)(struct net_device *, unsigned int mode);
+	void (*mac_link_up)(struct net_device *, unsigned int mode);
+};
+
+struct phylink *phylink_create(struct net_device *, struct device_node *,
+	phy_interface_t iface, const struct phylink_mac_ops *ops);
+void phylink_destroy(struct phylink *);
+
+int phylink_connect_phy(struct phylink *, struct phy_device *);
+int phylink_of_phy_connect(struct phylink *, struct device_node *);
+void phylink_disconnect_phy(struct phylink *);
+
+void phylink_mac_change(struct phylink *, bool up);
+
+void phylink_start(struct phylink *);
+void phylink_stop(struct phylink *);
+
+int phylink_ethtool_get_settings(struct phylink *, struct ethtool_cmd *);
+int phylink_ethtool_set_settings(struct phylink *, struct ethtool_cmd *);
+int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
+
+#endif