aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/backport-5.10
Commit message (Collapse)AuthorAgeFilesLines
* kernel: v5.10: backport GigaDevice SPI-NAND supportsChuanhong Guo2022-04-096-0/+482
| | | | | | This backports GD SPI NAND support from nand/next to v5.10 Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* Revert "kernel: backport MT7530 VLAN fix"Stijn Tintel2022-04-035-523/+0
| | | | | | | | | | There are various reports on Github and in the forum that this commit causes multiple problems. This reverts commit ee6ba216d8ba1b02154c287e64d709a8bc7b0054. Fixes: #9420 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport pgalloc memory leak fixStijn Tintel2022-04-031-0/+48
| | | | | | | Backport a fix for the massive memory leak observed in Octeon after switching to kernel 5.10. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: scale nf_conntrack_max more reasonablyVincent Pelletier2022-04-011-0/+100
| | | | | | | | | | | | | | | | | | | Use the kernel's built-in formula for computing this value. The value applied by OpenWRT's sysctl configuration file does not scale with the available memory, under-using hardware capabilities. Also, that formula also influences net.netfilter.nf_conntrack_buckets, which should improve conntrack performance in average (fewer connections per hashtable bucket). Backport upstream commit for its effect on the number of connections per hashtable bucket. Apply a hack patch to set the RAM size divisor to a more reasonable value (2048, down from 16384) for our use case, a typical router handling several thousands of connections. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.109John Audia2022-03-3017-169/+158
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: Backport mv88e6xxx patch to keep pvid at 0 if VLAN-unaware and ↵Marek Behún2022-03-271-0/+236
| | | | | | | | | | | | | | | remove hack Backport patch 8b6836d82470 ("net: dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware") from 5.15. Keeping the pvid at 0 when VLAN-unaware makes it possible to drop the hack introduced in commit 920eaab1d817 ("kernel: DSA roaming fix for Marvell mv88e6xxx"). Dropping the hack makes it possible to use VLAN interfaces with VID 1 on DSA ports without problems with FDB. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: move rtl8152 patches to genericAleksander Jan Bajkowski2022-03-2516-0/+5062
| | | | | | | | | | | | | This commit moves the patches for the r8152.c driver to the generic directory. Previously they were only available on the bcm27xx target. With these patches the Realtek RTL8153C, RTL8153D, RTL8156A and RTL8156B chips are supported on all targets by the kmod-usb-net-rtl8152 module. The RTL8156A and RTL8156B are the 2.5Gb/s Ethernet adapters. The patches have been tested on TP-Link UE300 (RTL8153A) and UNITEK 1313B (RTL8156B). Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: backport two intel igc patches from 5.15Pascal Coudurier2022-03-252-0/+116
| | | | | | | | | | | to allow proper initialization of device - igc: Remove _I_PHY_ID checking - igc: Remove phy->type checking Signed-off-by: Pascal Coudurier <coudu@wanadoo.fr> (refreshed) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: Fix patch headerMarek Behún2022-03-211-1/+1
| | | | | | | | | | Remove "a" character from the first line of patch 738-v5.14-01-net-dsa-qca8k-fix-an-endian-bug-in-qca8k-get-ethtool.patch Otherwise `git am` fails to apply this patch which is annoying when trying to do some development / rebasing. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: bump 5.10 to 5.10.106John Audia2022-03-193-15/+5
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: backport DSA patches fixing null-pointer dereference for 5.10Marek Behún2022-03-152-0/+151
| | | | | | | | | Backport patches 381a730182f1 ("net: dsa: Move VLAN filtering syncing out of dsa_switch_bridge_leave") 108dc8741c20 ("net: dsa: Avoid cross-chip syncing of VLAN filtering") from upstream (currently in net-next) to fix null-pointer dereference. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: backport patch to allow using parser_trx from ramipsINAGAKI Hiroshi2022-03-061-0/+33
| | | | | | | This patch adds a patch to allow using parser_trx from ramips target, mainly for Buffalo devices. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: move parser_trx patches of custom magic to genericINAGAKI Hiroshi2022-03-063-0/+107
| | | | | | | | This patch moves the patches of parser_trx in mediatek target to generic/backport-5.10 to use the changes from ramips target and backport the additional patch of the parser. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: bump 5.10 to 5.10.103Rui Salvaterra2022-03-052-3/+3
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-012-16/+16
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* mpc85xx: HiveAP-330: add tmp125 temperature sensorChristian Lamparter2022-02-251-0/+71
| | | | | | | | | | | the Aerohive HiveAP-330 and HiveAP-350 come equipped with an TI TMP125 temperature chip. This patch wires up the necessary support for this sensor and exposes it through hwmon / thermal sensor framework. Upstream support is coming, but it has to go through hwmon-next first. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.98John Audia2022-02-111-6/+1
| | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: backport MT7530 IRQ supportDENG Qingfang2022-02-101-0/+425
| | | | | | | | | | | Support MT7530 PHY link change interrupts, and enable for MT7621. For external MT7530, a GPIO IRQ line is required, which is board-specific, so it should be added to each DTS. In case the interrupt-controller property is missing, it will fall back to polling mode. Signed-off-by: DENG Qingfang <dqfext@gmail.com>
* kernel: backport MediaTek Ethernet PHY driverDENG Qingfang2022-02-091-0/+159
| | | | | | | | | | | | | | Add support for MediaTek Gigabit Ethernet PHYs found in MT7530 and MT7531. Fix some link up/down issues. The errornous check for the PHY mode which broke things with MT7531 has been removed as suggested by patch net: phy: mediatek: remove PHY mode check on MT7531 As a result, things are working fine now on MT7622+MT7531 as well. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* Revert "kernel: backport MediaTek Ethernet PHY driver"Hauke Mehrtens2022-02-051-162/+0
| | | | | | | | | | | | | | | | | | This reverts commit 8b4cba53a9402f44da2dced4a78ca065b15dca94. This broke the mt7530 on Linksys e8450 (mt7622) for me. [ 1.312943] mt7530 mdio-bus:00 lan1 (uninitialized): failed to connect to PHY: -EINVAL [ 1.320890] mt7530 mdio-bus:00 lan1 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 0 [ 1.331163] mt7530 mdio-bus:00 lan2 (uninitialized): failed to connect to PHY: -EINVAL [ 1.339085] mt7530 mdio-bus:00 lan2 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 1 [ 1.349321] mt7530 mdio-bus:00 lan3 (uninitialized): failed to connect to PHY: -EINVAL [ 1.357241] mt7530 mdio-bus:00 lan3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 2 [ 1.367452] mt7530 mdio-bus:00 lan4 (uninitialized): failed to connect to PHY: -EINVAL [ 1.375367] mt7530 mdio-bus:00 lan4 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 3 [ 1.385750] mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL [ 1.393575] mt7530 mdio-bus:00 wan (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "kernel: backport MT7530 IRQ support"Hauke Mehrtens2022-02-051-428/+0
| | | | | | | | | This reverts commit 3f4301e123f29348b4ad87578d62b7d1f5f210c6. This broke the mt7530 on Linksys e8450 (mt7622) for me. [ 1.300554] mt7530 mdio-bus:00: no interrupt support Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport MT7530 IRQ supportDENG Qingfang2022-02-051-0/+428
| | | | | | | | Support MT7530 PHY link change interrupts, and enable for MT7621. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MediaTek Ethernet PHY driverDENG Qingfang2022-02-051-0/+162
| | | | | | | | | Add support for MediaTek Gigabit Ethernet PHYs found in MT7530. Fix some link up/down issues. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 MDB operationsDENG Qingfang2022-02-051-0/+171
| | | | | | | | | Use hardware to forward multicast traffic instead of trapping to the host. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 VLAN fixDENG Qingfang2022-02-055-0/+523
| | | | | | | | Fix FDB learning bugs when VLAN filtering is enabled. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 ageing time supportDENG Qingfang2022-02-051-0/+99
| | | | | | | | Allow setting ageing time from 1 to 1,048,576 seconds. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MediaTek jumbo frame supportDENG Qingfang2022-02-053-0/+286
| | | | | | | | Allow MTU up to 2026 on mediatek, ramips/mt7621 targets. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* ath79: kernel: drop _machine_restart againLech Perczak2022-02-051-0/+54
| | | | | | | | | | Backport patch ("MIPS: ath79: drop _machine_restart again"), which is required to support GPIO restart handler on ZTE MF286, broken due to _machine_restart being restored in kernel accidentally, wich causes any registered restart handlers to not execute, including one from ath79-reset driver. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: bump 5.10 to 5.10.96Rui Salvaterra2022-02-012-2/+2
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-0117-39/+39
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.92Rui Salvaterra2022-01-1613-84/+19
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: Backport Armada 3720 comphy patches from 5.15Marek Behún2022-01-152-0/+117
| | | | | | | | | Backport 2 patches for Armada 3720 comphy from 5.15 kernel. These are needed for clear application of pending patches that fix this driver. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: 5.10: Backport pci-aardvark driver changes from 5.17Marek Behún2022-01-1511-0/+545
| | | | | | | | | | | | | | Backport Aardvark PCIe controller driver changes that will appear in 5.17 kernel. They are currently accessible on LKML [1], in linux-next repository [2], or in Bjorn Helgaas' repository [3]. These changes mainly enhance driver removal method. [1] https://lore.kernel.org/linux-pci/20211130172913.9727-1-kabel@kernel.org/ [2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/log/drivers/pci?h=next-20220107 [3] https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=next Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: bump 5.10 to 5.10.90Rui Salvaterra2022-01-071-1/+1
| | | | | | | | Add and enable a new kconfig knob to disable unprivileged eBPF by default. Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: backport qca8k new featureAnsuel Smith2022-01-039-0/+1273
| | | | | | | | | | | Backport qca8k new feature: - Ageing configuration support - Add 2 missing counter on qca8337 - Convert to regmap - Standardize define and code with GENMASK AND BITFILED macro - Add mdb add/del support Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: 5.10: backport additional qca8k fixesAnsuel Smith2022-01-033-0/+123
| | | | | | | | | Backport 3 additional fixes for qca8k. - Fix MTU calculation - Fix a bug with config set to the wrong PAD when secondary cpu port is defined. - Fix redundant check in parse_port_config Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: bump 5.10 to 5.10.89Rui Salvaterra2022-01-031-1/+1
| | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0186-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch [1] sunxi/patches-5.10/103-arm64-dts-allwinner-orangepi-zero-plus-fix-PHY-mo.patch [2] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.89&id=ba696b470839d70c6b8290c1f798bac7fb2a584c [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.89&id=93a957bbf46ceb224b959de61fe85cfc6f71b6c7 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: generic: backport linkstation-poweroff driverPawel Dembicki2021-12-291-0/+27
| | | | | | | | | | | Linkstation poweroff driver was added to mvebu target, but is required for kirkwood target too. This commit make two changes: - move linkstation-poweroff support patch from mvebu to generic and replace upstream accepted version - backport small linkstation-poweroff fix from 5.12 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: bump 5.10 to 5.10.88Rui Salvaterra2021-12-271-2/+2
| | | | | | | | | Deleted (upstreamed): mpc85xx/patches-5.10/002-powerpc-85xx-fix-oops-when-CONFIG_FSL_PMC-n.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.88&id=151ffac3ac277ad7c2a5f201b566b56d97ed3a99 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.85John Audia2021-12-172-3/+3
| | | | | | | | | | | | | | | | Removed target for patch which does not exist: bcm27xx/patches-5.10/950-0249-kbuild-Disable-gcc-plugins.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800* Run-tested: bcm2711/RPi4B, ipq806x/R7800* * Had to revert 7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149) Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.84John Audia2021-12-175-16/+16
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.83John Audia2021-12-123-9/+9
| | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0024-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch[1] bcm53xx/patches-5.10/033-v5.16-0025-ARM-dts-BCM5301X-Add-interrupt-properties-to-GPIO-no.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=b2cd6fdcbe0a5cb44e4610a08cc58261d494a885 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=9db1d4a3c2700e1cc84c3d61199411d75c2a3ec6 Build system: x86_64* Build-tested: bcm2711/RPi4B, ipq806x/R7800† Run-tested: bcm2711/RPi4B, ipq806x/R7800† * Had to revert 7c99085bd69742f66207d61e9f2da5ec4f8f9d2f in order to build (latest bump of ca-certificates) † Had to revert 7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149) Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.82John Audia2021-11-272-2/+2
| | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0014-ARM-dts-NSP-Fix-mpcore-mmc-node-names.patch Manually rebased: ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.81John Audia2021-11-272-3/+3
| | | | | | | | | | | | | Manually rebased: octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.80Rui Salvaterra2021-11-198-22/+22
| | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch [1] bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch [2] lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch [3] lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch [4] lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch [5] lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch [6] Manually rebased: ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=47462c5e600fbaffd755cd13dedd80d04e41ff83 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=2fde76df1885a6bec04317e457121326070450eb [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=9b366f5221d8aa64b22f35be137a5749326444ce [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=5af57ce8a6155fe3e4270d28d171abf8903bebc0 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=b92a5df2c7adc79a57481445f67de0c1c716581f [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=6b72caabc47011d03f44064452b2c65e8ed18326 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: backport explicit MAC06 disable patchMatthew Hagan2021-11-151-0/+47
| | | | | | | | | Backport of Ansuel Smith's "net: dsa: qca8k: make sure PAD0 MAC06 exchange is disabled", to ensure mac06 is disabled even if enabled by the bootloader. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: bump 5.10 to 5.10.79Rui Salvaterra2021-11-131-4/+4
| | | | | | | | | Manually rebased: generic/backport-5.10/810-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch Tested-by: John Audia <graysky@archlinux.us> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.78John Audia2021-11-071-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: 5.10: compress 7xx patch numberingMatthew Hagan2021-11-0793-0/+0
| | | | | | | | | The qca8k patch series brings the numbering to 799. This patch renames 7xx patches to create space for more backports to be added. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> [rename 729->719] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.10 to 5.10.77Rui Salvaterra2021-11-066-19/+19
| | | | | | | | | Deleted (upstreamed): bcm53xx/patches-5.10/081-v5.15-Revert-pinctrl-bcm-ns-support-updated-DT-binding-as-.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=01c2881bb0e0a71b87ca425e1b763ac13855aa7e Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 21:32:41 +0000