aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/gemini
Commit message (Collapse)AuthorAgeFilesLines
* gemini: Make root filesystem writeableLinus Walleij2019-06-151-6/+8
| | | | | | | | | | | | | | | | | The squashfs+jffs2 root filesystem only came up as read-only and the config would not take: [ 25.600237] mount_root: Could not open mtd device: /dev/mtd4 [ 25.634674] mount_root: reading rootfs_data failed [ 25.665346] mount_root: Could not open mtd device: /dev/mtd3 [ 25.699802] mount_root: reading rootfs failed [ 25.726426] mount_root: mounting /dev/root Well that is not very strange since the whole firmware partition is made read-only in the device tree. Let's fix that by augmenting the OpenWrt patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Fix MAC address assignment for DIR-685Linus Walleij2019-06-151-0/+15
| | | | | | | | | | The DIR-685 has the MAC addresses in the RedBoot code just like DNS-313. Check some magic numbers to determine that the MAC address is where we want it and extract it from RedBoot. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [replaced ifconfig with ip, ! -z = -n, added string quotes]
* gemini: Make a per-board case for ethernet MACLinus Walleij2019-06-151-12/+16
| | | | | | | | The DNS-313 isn't the only special board so let's bite the bullet and create a case ladder in preparation for DIR-685. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed]
* gemini: Use library functions to assign MAC addressLinus Walleij2019-06-151-12/+20
| | | | | | | | | | | | | | | | | This simplifies the ethernet address extraction script by using standard library functions to locate the MTD partitions and extract ethernet address from a binary offset location in the flash. Furthermore, the aging ifconfig is replaced by the ip tool, which will now assign the MAC addresses. Suggested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [ifconfig replacement, use -n instead of ! -z, -n requires string to be quoted within the test brackets, drop prepended "x" in check, add quotes, make local variables local, kill whitespaces]
* gemini: enable CONFIG_PACKETChristian Lamparter2019-06-152-2/+0
| | | | | | | | | | CONFIG_PACKET is a important feature to have. The Packet protocol is used by applications which communicate directly with network devices without an intermediate network protocol implemented in the kernel, e.g. tcpdump and ip. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gemini: Activate Realtek and vitesse DSA driver againHauke Mehrtens2019-05-301-0/+2
| | | | | | | | This activates the wrongly removed DSA drivers again. Fixes 9ab4d74b5f86 ("kernel: Move some DSA config options to generic config") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Support sysupgrade on DIR-685Linus Walleij2019-05-232-1/+28
| | | | | | | | | | | | | This makes sysupgrade work on the D-Link DIR-685 after initial factory install. We create the platform.sh script to support sysupgrade on more targets as we move on with sysupgrade support. Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> [cleanup in platform.sh, removed superfluous SUPPORTED_DEVICES]
* gemini: Fix up firmware checksum on DIR-685Linus Walleij2019-05-181-0/+20
| | | | | | | | | | | | | | | | | | Using the same method as the D-Link DAP-2695 A1 we use the "mtd" tool to augment the firmware checkum in flash on first boot of a new firmware on the D-Link DIR-685. We need to augment the Makefile for "mtd" to build in the special WRGG fixup support for Gemini as well. This works around the problem of the machine not booting after factory install unless the sysupgrade is applied immediately. Based on commit e3875350f3e4185020b64e0588bba521cd1d6e64 "ar71xx: add support for D-Link DAP-2695 rev. A1" Cc: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: Move some DSA config options to generic configHauke Mehrtens2019-05-141-4/+0
| | | | | | | This moves some new configuration options to the generic kernel configuration instead of configuring them for each target on our own. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* gemini: Make kernel text and rodata read-onlyHauke Mehrtens2019-05-112-4/+0
| | | | | | | This is activate for all other targets except gemini, also activate it there. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Deactivate CONFIG_BINFMT_MISCHauke Mehrtens2019-05-112-2/+0
| | | | | | | | | | CONFIG_BINFMT_MISC allows it to add support for new executable formats to the kernel from user space, the kernel will then detect for example a java binary and call the java execution program automatically. I am not aware that this feature is used in OpenWrt and this could be used to exploit something. Deactivate it for all targets for now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Activate CONFIG_SYN_COOKIES for all targetsHauke Mehrtens2019-05-112-2/+0
| | | | | | | | | | Some targets deactivated CONFIG_SYN_COOKIES, for unknown reasons, use the default setting from the generic configuration which activates CONFIG_SYN_COOKIES. This should prevent SYN flooding. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* build: add a config option for enabling a testing version of the target kernelFelix Fietkau2019-05-111-0/+1
| | | | | | | If the target supports a newer kernel version that is not used by default yet, it can be enabled with this option Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.19 to 4.19.34Koen Vandeputte2019-04-082-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Removed: - 030-PCI-dwc-skip-MSI-init-if-MSIs-have-been-explicitly-d.patch Altered: - 366-netfilter-nf_flow_table-clean-up-and-fix-dst-handlin.patch - 650-netfilter-add-xt_OFFLOAD-target.patch - 662-remove_pfifo_fast.patch - 332-arc-add-OWRTDTB-section.patch - 100-clocksource-drivers-arch_timer-Workaround-for-Allwin.patch - 702-phy_add_aneg_done_function.patch New symbols: - ARC_IRQ_NO_AUTOSAVE - SUN50I_ERRATUM_UNKNOWN1 Compile-tested: cns3xxx, imx6, sunxi Runtime-tested: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* gemini: Classify Raidsonic NAS IB-4220-B as a NASChristian Lamparter2019-03-251-0/+1
| | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gemini: D-Link DNS-313 is a NASChristian Lamparter2019-03-251-0/+1
| | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gemini: Generate padded kernel+rootfs images for DIR-685Linus Walleij2019-03-135-3/+174
| | | | | | | | | | | | | | | | | | | | | We currently generate a kernel that boots from the harddrive in the DIR-685. That's not how we usually do things, so let's augment it to boot from flash and mount the rootfs using squashfs and JFFS2 like everyone else. Partition splitting only work when the partitions are inside of a "partitions" node which is why we have a patch like this (submitted upstream). Another patch drops the rootfs arguments and renames the firmware partition while adding the compatible "wrg" to it so the WRGG parser will kick in. Factory image was tested by bravely reflashing the DIR-685 from stock firmware using the web UI and the serial console boot loader. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Generate harddisk image for DNS-313Linus Walleij2019-02-203-7/+50
| | | | | | | | | | | | | | | | | | | | | | This makes OpenWrt build an Ext2+Ext4 partitioned image for the D-Link DNS-313 with two blank partitions, a boot partition on /dev/sda3 and a rootfs partition on /dev/sda4. This uses the methods already used in apm821xx including the tricks to convert the generated Ext2 filesystem partition to version 1 so that the firmware bootloader will properly recognize it. We patch a bit around the build files to make sure we get the rootfs size set and that genext2fs is properly built. Tested on the D-Link DNS-313. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [Fixing and tricksing] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Name binary "bootpart.tar.gz"Linus Walleij2019-02-141-2/+2
| | | | | | | | | | This factory binary i supposed to actually be unzipped and untarred by the user as part of the installation process (this NAS boots from harddisk), so name it "bootpart.tar.gz" and not "factory.bin" so it is helpful for users. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 4.19 to 4.19.21Koen Vandeputte2019-02-141-66/+0
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 0007-ARM-dts-Fix-up-the-D-Link-DIR-685-MTD-partition-info.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.99Koen Vandeputte2019-02-143-4/+4
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 950-0434-mmc-bcm2835-Recover-from-MMC_SEND_EXT_CSD.patch Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* gemini: Fix kmod-led-trig-heartbeat typoLinus Walleij2019-02-111-1/+1
| | | | | | | | It's kmod-ledtrig-* not kmod-led-trig-*. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [extended subject] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 4.19 to 4.19.18Koen Vandeputte2019-01-2818-148/+34
| | | | | | | | | | | | | | | | Refreshed all patches. Removed upstreamed: - 031-v5.0-MIPS-BCM47XX-Setup-struct-device-for-the-SoC.patch - 142-jffs2-Fix-use-of-uninitialized-delayed_work-lockdep-.patch Removed upstreamed hunk in: - 800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* gemini: Add a config for kernel v4.19Linus Walleij2019-01-261-0/+495
| | | | | | | This adds a config for kernel v4.19 to the Gemini target. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Add v4.19 kernel patchesLinus Walleij2019-01-2618-0/+1631
| | | | | | | | | | This is the remainder of kernel patches for the v4.19 kernel. A whole slew of the previous patch stack is now upstream, so this mainly contains the stuff that was added upstream between v4.19 and v5.0-rc1, and then the USB FOTG201 patches from Hans. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: dlink-dir-685: fix rt2800-pci package nameChristian Lamparter2019-01-261-1/+1
| | | | | | The package is now called kmod-rt2800-pci. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gemini: add EOD marker to rootfs imagesMathias Kresin2019-01-261-1/+2
| | | | | | | | | With 6409b159e8b8 ("gemini: switch to 4.14") the EOF marker were dropped from the rootfs images. Without the marker the rootfs_data partition can't be created and it isn't possible to permanently store any configuration changes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: fix ITian Square One SQ201 package selectionMathias Kresin2019-01-261-1/+1
| | | | | | | All kernel modules are prefixed with kmod-. Add the prefix to include the desired packages. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: replace date placeholderMathias Kresin2019-01-261-0/+2
| | | | | | | | | | Replace the data placerholder in ImageInfo-itian_sq201 in a reproducible way. The code for the replace was accidentality dropped in 5bac6238959 ("gemini: unify and fix ib-nas4220b and sq201 image creation") Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: drop Teltonika RUT1xx artifactsMathias Kresin2019-01-263-59/+0
| | | | | | | | Support for the Teltonika RUT1xx was added with the switch to kernel 4.4. Hidding such changes in a kernel switch commit is the wrong way and the support for the Teltonika RUT1xx is pretty much incomplete. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: add wiligear image build codeMathias Kresin2019-01-261-2/+23
| | | | | | | | | | | | | | | | | They were dropped with 6409b159e8b8 ("gemini: switch to 4.14") without any explaination. The image generation is disabled for now as it would break the build for the target. The mkfwimage2 call need to be adjusted to reflect the real size of kernel and rootfs. Nevertheless, add the required code to give interested parties a chance to fix the remaining issues. The dts would need to use the ecoscentric,redboot-fis-partitions partition parser to get the correct partition offsets and size. It's expected that the OEM firmware adjusts the on flash partition table with the values defined in the image header. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: fix alphabetical orderMathias Kresin2019-01-261-10/+10
| | | | | | Reorder the image recipes to keep the alphabetical order. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: use dts compatible based image filenamesMathias Kresin2019-01-263-15/+21
| | | | | | | | Use an output image filename based on the compatible string from the dts files. This way it is way easier to get for which board an image is intended. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: drop unnecessary image build default variablesMathias Kresin2019-01-261-3/+0
| | | | | | | They are either not required, set to an earlier set default value or defined due to target features. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: drop unnecessary imagesMathias Kresin2019-01-261-4/+1
| | | | | | | | | The root filesystem is already part of the factory image and most likely not required at all. The same applies to the kernel images. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: all images are factory imagesMathias Kresin2019-01-261-6/+6
| | | | | | | There is no support for sysupgrade in gemini, hence all images are only suitable for an installation via bootloader or oem firmware. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: follow common pattern for temp dir namingMathias Kresin2019-01-261-8/+10
| | | | | | | | For temporary directories <imagename>.tmp is a common pattern in image build code across the tree. Use it for the nas4220b/sq201 recipe as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: use existing build code where possibleMathias Kresin2019-01-261-2/+2
| | | | | | | Use the existing image build recipes in favour of introducing deplicate shell code. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: make all tar files more reproducibleMathias Kresin2019-01-261-3/+5
| | | | | | | Force a fixed sorting and use the parameters to create reproducible archives for all tar invocations. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: build images in temporary directoriesMathias Kresin2019-01-261-11/+13
| | | | | | | Create files in temporary directories within the build directory instead manipulating files in the (final) output directory. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: don't hardcode image filenamesMathias Kresin2019-01-261-6/+8
| | | | | | | Use the existing image build code mechanisms to specify the image output filename. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: fix parallel buildMathias Kresin2019-01-261-0/+1
| | | | | | | | | | | | Due to the missing PROFILES all images are build, regardless of the selected (or currently processed in case of a multi profile build). Because of the race condition builds with eight parallel jobs fail, which can be seen on the build bots as well. Add the PROFILES variable for now, till the root cause is identified. Signed-off-by: Mathias Kresin <dev@kresin.me>
* gemini: unify and fix ib-nas4220b and sq201 image creationChristian Lamparter2019-01-242-34/+25
| | | | | | | | | | | | | Both Build/sq201-images and Build/nas4220b-images scripts are very similar. This patch unifies both methods at the cost of renaming the produced sysupgrade file names, but with the benifit of creating better reproducible files. The patch also fixes a race in parallel builds in which case the ImageInfo of one device could end up in both sysupgrade files. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gemini: lazy set IMAGE_NAMEChristian Lamparter2019-01-241-1/+1
| | | | | | | | | | | Currently, IMAGE_NAME is expanded at declaration time and this causes strange filename in the builder's logs: |cp: cannot stat '[...]/openwrt-gemini-dlink-dns-313-.': No such file or directory |cp: cannot stat '[...]/openwrt-gemini-nas4220b-.': No such file or directory |[...] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: Deactivate CONFIG_COMPAT_BRKHauke Mehrtens2018-12-261-1/+0
| | | | | | | | | CONFIG_COMPAT_BRK disables the heap randomization which is only needed for very old and ancient user space applications, I am not aware that we run any of these, just deactivate this option for these targets to allow heap randomization. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* gemini: Activate USB support againHauke Mehrtens2018-12-161-0/+1
| | | | | | | | | | | This activates the CONFIG_USB_SUPPORT option in the in the gemini kernel again which will provide the core USB support and makes it possible to compile the rest of the USB parts into modules. Without this change USB will not be available in the gemini target and some modules fail to compile because the feature list indicates USB support. Fixes: 10ec966f7ba7 ("gemini: Break out USB to packages") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* gemini: Fix up image generationLinus Walleij2018-10-201-6/+10
| | | | | | | | | | | | | | | I noticed that the image generator for the Gemini generates some 10+ MB files for the second (application) partition. This is just wrong. The first 6144K partition named initramfs easily fits OpenWRTs squashfs,jffs2 overlayed partitions with nice headroom for storing configuration files. Generate a blank partition for the hddapp.tgz file and delete it after generating the firmware image - when performing updates manually you just want the "rd.z" file around anyways. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Break out USB to packagesLinus Walleij2018-10-203-8/+6
| | | | | | | | | | | | This creates a new kernel package for the fotg210 host controller and uses that with the gemini to shrink the kernel. The SQ201 needs the USB2 PCI package as well. The build system required me to make kernel_oldconfig beofore it would build without errors so some minor unrelated Kconfig entries are changed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: remove DEVMEM and DEVKMEM from target's configLuis Araneda2018-07-071-1/+0
| | | | | | | | | These options are handled by generic configuration Targets that need these options should select KERNEL_DEVMEM and/or KERNEL_DEVKMEM options on OpenWRT's config Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* gemini: Cook SQ201 imagesLinus Walleij2018-06-182-0/+35
| | | | | | | | | This generates the "rd.gz" and "hddapp.tgz" that doesn't contain anything of the sort but rather the OpenWRT rootfs. It works the same way as how we generate the same layout for the NAS4220b. For some reason the ImageInfo file is different for the SQ201. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>