aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx
Commit message (Collapse)AuthorAgeFilesLines
* kernel: update 3.10 to 3.10.32Gabor Juhos2014-02-231-26/+0
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39707
* brcm63xx: fix RG100A/DB120 usb port numberJonas Gorski2014-02-2251-75/+85
| | | | | | | | Set usbh ports to 2 to fix #15007. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39681
* brcm63xx: fix number of usb ports for HW556 variantsJonas Gorski2014-02-2211-18/+21
| | | | | | | | Don't only fix up the fallback board, but also all three variants. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39680
* brcm63xx: add initial support for BCM963268BU_P300 reference boardJonas Gorski2014-02-223-2/+150
| | | | | | | | | Only netboot tested, so no images or now. GbE ports are only working in FE mode, and leds do not work. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39679
* brcm63xx: add VW6339GU supportJonas Gorski2014-02-223-2/+128
| | | | | | | | | Completely untested except for booting from network; wan port only works in 10/HD, lan1 only in 100/FD. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39678
* brcm63xx: fix number of switch ports for BCM63168/63268Jonas Gorski2014-02-222-6/+10
| | | | | | | | | | | BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268 has two additional RGMII ports, making it 8. Fix this by checking the chip variant and applying an appropriate limit. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39677
* brcm63xx: F@ST2504n board support (image, base-files)Jonas Gorski2014-02-223-0/+9
| | | | | | | | Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4730/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39676
* brcm63xx: F@ST2504n board supportJonas Gorski2014-02-226-7/+120
| | | | | | | | Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4729/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39675
* brcm63xx: add support for Asmax AR 1004g routerJonas Gorski2014-02-225-2/+79
| | | | | | | | | | Support for Asmax AR 1004g router Signed-off-by: Adrian Feliks <mexit@o2.pl> Patchwork: http://patchwork.openwrt.org/patch/4464/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39674
* brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL routerJonas Gorski2014-02-222-0/+19
| | | | | | | | | | | | | This adds profile and build image for Sagemcom F@st2704, using b43 driver. For WiFi to work properly BCMA fallback SPROM support patch must be applied (http://git.io/z1Ki8A). Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4212/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39673
* brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL routerJonas Gorski2014-02-223-1/+26
| | | | | | | | | | This adds userspace support for Sagemcom F@st 2704 router. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4215/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39672
* brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL routerJonas Gorski2014-02-229-14/+159
| | | | | | | | | | | | | This adds kernel support support for Sagemcom F@st 2704 wireless ADSL router. It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ modem equipped with 64 MiB RAM and 8 MiB flash. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4266/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39671
* brcm63xx: fix warning in Redboot codeFlorian Fainelli2014-01-271-1/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39404
* kernel: update 3.10 to 3.10.28Gabor Juhos2014-01-261-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39399
* brcm63xx: enable support for BCM63268Florian Fainelli2014-01-211-1/+1
| | | | | | | | Support for the BCM63268 is usable, enable it by default. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39364
* brcm63xx: add support for BCM963269BHR boardFlorian Fainelli2014-01-212-2/+90
| | | | | | | | | Add kernel support for the BCM963269BHR board, USB and Ethernet switch, LEDs and buttons are working. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39363
* brcm63xx: improve BCM63268 supportFlorian Fainelli2014-01-212-10/+65
| | | | | | | | | Allow using the HSSPI controller since it works just fine, as well as the integrated switch core, since that one works too. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39362
* brcm63xx: fix typo breaking build in r39325Jonas Gorski2014-01-191-1/+1
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39326
* brcm63xx: set usb host port number for some devicesJonas Gorski2014-01-1938-70/+83
| | | | | | | | | | | | Update a few devices with their actual port numbers, especially those with two ports. Should allow properly using the second port on the Neufboxen and HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39325
* brcm63xx: allow setting the number of usb host ports for boardsJonas Gorski2014-01-197-8/+180
| | | | | | | | | | Allow setting the number of available usb host ports for boards with additional sanity checks to allow using the second port on devices where it is available. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39324
* brcm63xx: add USB support for BCM63268Jonas Gorski2014-01-195-5/+193
| | | | | | | | Add and enable USB support for the BCM63268 family of SoCs. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39323
* brcm63xx: BCM6318 needs to select _HAS_OHCI/EHCI tooJonas Gorski2014-01-191-0/+11
| | | | | | | | | USB will fail to work if compiling with BCM6318 only if BCM63XX_HAS_EHCI and BCM63XX_HAS_OHCI are not selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39322
* brcm63xx: prevent usb clock state inconsistency on BCM6318Jonas Gorski2014-01-191-29/+35
| | | | | | | | | | | | | | Return the same clock for usbh and usbd on BCM6318 to prevent the clock getting disabled despite being supposed to be enabled, e.g. by the following sequence: clk_enable(usbh); <- usbh->usage = 1, enabled clk_enable(usbd); <- usbd->usage = 1, enabled (no effect) clk_disable(usbd); <- usbd->usage = 0, -> disabled! Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39321
* brcm63xx: do not add twice the same field to boardFlorian Fainelli2014-01-1648-94/+86
| | | | | | | | | Changeset r39302 updated a board section and added twice .has_ehci0, this is not necessary, so fix it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39304
* brcm63xx: add USB support to BCM6318Florian Fainelli2014-01-1550-88/+209
| | | | | | | | | | BCM6318 has a special initialization sequence which involves touching PLL control registers in the USBH_PRIV register space, as well as toggling a bit the Simulation control register. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39302
* brcm63xx: fix BCM96318MVWG LEDsFlorian Fainelli2014-01-1518-26/+25
| | | | | | | | Power LED is not active low, and ppp-fail is red, not green. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39294
* brcm63xx: remove config-3.11Florian Fainelli2014-01-151-150/+0
| | | | | | | | This was not supposed to be committed, remove it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39293
* brcm63xx: 96368MVWG supports USB gadget, enable itFlorian Fainelli2014-01-1419-25/+183
| | | | | | | | | Enable the use of the USB gadget device at the board level so we can use bcm63xx_udc on this board. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39292
* brcm63xx: replace gadget driver build fix with upstream submissionFlorian Fainelli2014-01-141-4/+45
| | | | | | | | | Also fixing a build warning due to a misplaced parenthesis in the previous submission. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39291
* brcm63xx: add support for the BCM96318REF_P300 boardFlorian Fainelli2014-01-141-0/+104
| | | | | | | | | Very similar to the BCM96318REF board except for the name and the SDRAM/DDR configuration which is totally transparent for us. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39286
* brcm63xx: enable 6318 supportFlorian Fainelli2014-01-141-1/+1
| | | | | | | | BCM6318 support is usable enough to be enabled by default, turn it on. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39284
* brcm63xx: add basic support for the BCM96318REF boardFlorian Fainelli2014-01-142-2/+107
| | | | | | | | | | | Add basic support for the BCM96318REF board which is comprised of: - HS-SPI flash support - Ethernet switch support - USB slave device support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39283
* brcm63xx: improve BCM6318 supportFlorian Fainelli2014-01-143-1/+131
| | | | | | | | | | | | | Provide clock toggling for the USB host and slave controller as well as for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use request_mem_region() as the Roboswitch register overlaps with the Roboswitch IUDMA channels, hence making the driver return -EBUSY. A future fix might be to use variable size RSET_ENETSW sizes depending on the chip we are targetting. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39282
* brcm63xx: package the USB gadget module (bcm63xx_udc)Florian Fainelli2014-01-141-0/+16
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39281
* brcm63xx: target supports USB gadget devicesFlorian Fainelli2014-01-141-1/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39280
* brcm63xx: fix USB gadget build failure after 6345 EthernetFlorian Fainelli2014-01-141-0/+127
| | | | | | | | | | While adding support for BCM6345 Ethernet, some changes in the macros ENETDMA{C,S} where introduced which now make the bcm63xx USB gadget driver fail to build. Fix this. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39279
* brcm63xx: allow HSSPI registration on 6318Florian Fainelli2014-01-141-0/+11
| | | | | | | | | A missing condition check in dev-hsspi.c prevented the controller from being registered on 6318 where it is fully functional. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39278
* brcm63xx: fix build failure on varidFlorian Fainelli2014-01-142-2/+2
| | | | | | | | | varid might both unused and unitialized when building for e.g: bcm6318, fix these two warnings turned into errors. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39277
* brcm63xx: fix ohci frame number offsetJonas Gorski2014-01-131-0/+31
| | | | | | | | | | | | BCM63XX's ohci controller does not need the frame number shift, but that was guarded with a PPC symbol. Fix this by making the no-fix generally available. This is a regression from the previous conversion to ohci platform driver. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39274
* brcm63xx: fix spi flash setup on (at least) some reference boardsJonas Gorski2014-01-1311-168/+194
| | | | | | | | | CFE seems to leave the SPI flash mapping in an invalid state after loading the kernel on some reference boards, so fix it up on boot. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39273
* brcm63xx: add initial support for BCM6318Jonas Gorski2014-01-1311-17/+1123
| | | | | | | | | Add inital support for BCM6318, but keep it disabled for now until most things are supported. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39272
* brcm63xx: add initial support for BCM63268Jonas Gorski2014-01-1314-15/+978
| | | | | | | | | Add initial support for the BCM63268 family of SoCs, but keep it disabled for now as most things don't work yet. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39271
* brcm63xx: fix the pcie window sizeJonas Gorski2014-01-131-0/+20
| | | | | | | | | The low PCIe window on BCM6328 and BCM6362 is actually only 1 MiB big, not 16 MiB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39270
* brcm63xx: add support for chip variantsJonas Gorski2014-01-138-4/+258
| | | | | | | | | | | | Some SoCs have variants which are mostly the same, but use a different chip id (or not). Add code for detecting them and handling them as their standard counterparts. This adds support for e.g. BCM6369. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39269
* brcm63xx: remove non runtime detect and refresh affinity patchesJonas Gorski2014-01-1324-752/+1368
| | | | | | | | | | Remove the non runtime detect code since its effectiveness is dubious and almost never used. Also update affinity patches to work on top of it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39268
* brcm63xx: update bmips patches with upstream submissionJonas Gorski2014-01-1323-268/+683
| | | | | | | | | Update bmips cleanup patches with upstream submission and backport a few bmips fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39267
* brcm63xx: spi flash on legacy spi controller needs the workaroundJonas Gorski2014-01-132-2/+5
| | | | | | | | | Fixes generic SPI flash accesses on BCM6358/BCM6368. BCM6338 still needs additional fixes for M25P80, so it remains broken for now. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39266
* brcm63xx: fix legacy spi tranfers >= 256 bytesJonas Gorski2014-01-132-0/+57
| | | | | | | | | Fixes e.g. SPI flash access on BCM6358/BCM6368. Transfers < 256 bytes are not affected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39265
* brcm63xx: update HSSPI driver with upstream submissionJonas Gorski2014-01-1329-672/+686
| | | | | | | | | Update the HSSPI driver with the upstream submitted one that has a workaround for the auto cs down issue. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39264
* kernel: update 3.10 to 3.10.26Gabor Juhos2014-01-114-4/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39220
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 23:17:07 +0000