aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx/base-files
Commit message (Expand)AuthorAgeFilesLines
* Add F@ST2604 board support.Jonas Gorski2012-10-211-0/+1
* bcm63xx: fix entering failsafe through buttonJonas Gorski2012-10-081-0/+1
* bcm63xx: Add nb6 support (BCM6362 SoC base boards)Jonas Gorski2012-07-312-0/+5
* Add CT6376-1 board supportFlorian Fainelli2012-07-272-0/+2
* add 96348w3 board (#10764)Florian Fainelli2012-06-061-1/+2
* bcm63xx: build images for 6328 reference boards with various flash sizesJonas Gorski2012-05-303-0/+12
* bcm63xx: readd accidentially dropped network config for SPW303VJonas Gorski2012-05-301-0/+1
* bcm63xx: add support for DSL-274XB rev F1Jonas Gorski2012-05-273-1/+4
* bcm63xx: add a default switch configuration for DSL-274XBJonas Gorski2012-05-271-1/+6
* bcm63xx: setup network config through uci-defaultsJonas Gorski2012-05-2711-159/+42
* bcm63xx: move the board name workaround to /lib/brcm63xx.shJonas Gorski2012-05-272-8/+8
* bcm63xx: use the exact board id as board identification stringJonas Gorski2012-05-272-14/+17
* Merge branch 'bcm63xx'Florian Fainelli2012-03-052-1/+16
* add support for BT Voyager 2110 (#8810)Florian Fainelli2011-05-203-1/+20
* add support for DSL-2640B rev B2Florian Fainelli2011-05-202-0/+19
* add support for D-Link DVA-G3810BN/TLFlorian Fainelli2011-05-202-0/+33
* add support for BT Voyager 2500 (#9070)Florian Fainelli2011-05-201-1/+1
* bcm63xx: Add support for the T-Home Speedport W 303VFlorian Fainelli2011-05-112-0/+19
* bcm63xx: Update support for the DSL-274xB revision CFlorian Fainelli2011-05-112-1/+6
* bcm63xx: Accept any led with power in its name as power ledFlorian Fainelli2011-05-111-1/+1
* add support for 'MAGIC' bcm6348-based boardFlorian Fainelli2011-02-191-1/+1
* fix T-Com Speedport W 500V default configFlorian Fainelli2011-02-091-0/+0
* base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devi...Daniel Dickinson2010-12-261-0/+20
* Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 963...Daniel Dickinson2010-12-102-0/+19
* boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than th...Daniel Dickinson2010-12-071-0/+10
* Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, no...Daniel Dickinson2010-12-071-2/+1
* base-files: Added the preinit information for reset button and preinit indica...Daniel Dickinson2010-12-061-0/+5
* base-files: Added network defconfig because board only has one ethernet (4-po...Daniel Dickinson2010-12-061-0/+14
* bcm63xx: Add support for the T-Com Speedport W 500V.Daniel Dickinson2010-11-282-1/+15
* bcm63xx: Finalize support for DSL-274xB, rev C2.Daniel Dickinson2010-11-282-0/+19
* bcm63xx: Allow 'colored' power leds.Daniel Dickinson2010-11-281-1/+1
* bcm63xx: Don't hardcode the switch ethernet interface in preinit.Daniel Dickinson2010-11-282-10/+10
* bcm63xx: Add defconfigs.Daniel Dickinson2010-11-282-1/+18
* base-files: diag.sh: For power button as preinit status led, end with led lef...Daniel Dickinson2010-08-021-1/+5
* base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons ...Daniel Dickinson2010-08-021-1/+6
* brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switc...Daniel Dickinson2010-05-304-0/+97
* brcm63xx: Added preinit reset button module loading for devices known to supp...Daniel Dickinson2010-05-301-0/+16
* brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00)Daniel Dickinson2010-05-301-0/+67
* brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom ...Daniel Dickinson2010-05-302-0/+35
* we are using the default-on trigger for power LEDs, no need to change their s...Florian Fainelli2009-07-181-12/+0
* register GPIO-connected LEDs for known boardsFlorian Fainelli2009-07-181-0/+12
* add support for sysupgrade (#5117)Florian Fainelli2009-05-171-0/+16
* Make 4-port LAN and 1 port wan configurations workFlorian Fainelli2008-11-261-0/+19
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 15:32:17 +0000