aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx/base-files/lib
Commit message (Collapse)AuthorAgeFilesLines
* brcm63xx: rename target to bcm63xxAdrian Schmutzler2020-02-141-16/+0
| | | | | | | | | | This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm63xx: use compatible instead of manually setting board nameAdrian Schmutzler2020-02-082-319/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the translation of device model name into a board name in lib/brcm63xx.sh. The latter has been actually totally useless as we have the compatible which can be used instead of the board name (and actually is at other targets like ath79 or ramips). The change requires updating the base-files with the new identifiers based on compatible. With all "board names" replaced by the compatible, we do not need the old scripts to detect board name anymore and can also remove the obsolete treatment of "legacy" devices without DTS, as there are none of those left. So, this patch removes the target-specific board detection and uses the standard procedure in package/base-files/files/lib/preinit/02_sysinfo This also fixes several cases where the board name was not set or evaluated correctly: - asmax,ar1004g in 02_network - telsey,magic in 09_fix_crc/02_network - brcm,bcm96338gw in 02_network - brcm,bcm96338w in 02_network - brcm,bcm96348gw in 02_network - dynalink,rta1025w in 02_network - huawei,echolife-hg520v in 02_network - several cases in diag.sh The following orphaned identifiers are removed from board.d files: - dmv-s0 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm63xx: initial support for Sky SR102 routerAndrius Štikonas2018-07-161-0/+3
| | | | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. SOC: BCM63168 (BMIPS4350 V8.0 @400MHz) Flash size: 16 MiB RAM size: 128 MiB Heavily based on patch for OpenWRT Chaos Chalmer. Original patch and more info can be found at: https://openwrt.org/toh/sky/sr102 Known issues: - Wireless and ADSL modem are not working. Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
* brcm63xx: Add Sercomm AD1018 supportDaniel Gonzalez Cabanelas2017-12-161-0/+3
| | | | | | | | | | | | | | | | | | | | Add support for the Sercomm AD1018 router This a BCM6328 based board, 128 MB RAM, 128 MiB NAND flash, with an onboard BCM43217 wifi, 4 ethernet ports and 1 USB host port (not soldered). The board also has an FXS chip (Si32177) connected via SPI (SS2#), without support in LEDE. Since NAND flash chips aren't still supported in brcm63xx, the support is for now added to work only with SPI flash chips. Therefore hardware modding, soldering a new SPI flash chip, is required to make the board work with LEDE (tested and working OK). The flash at dts is intentionally left without partitioning to let the user choose a NOR chip of any size (8, 16 or 32 MB). Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> [jonas.gorski: renamed ad1018 to ad1018-nor to signify the modification] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: Add Comtrend AR-5315u supportDaniel Gonzalez Cabanelas2017-08-261-0/+3
| | | | | | | | | | | | Add support for the Comtrend AR-5315u router This a BCM6318 based board, 64 MB RAM, 16 MB SPI flash, with an onboard BCM43217 wifi, 4 ethernet ports and 1 USB host port Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> [jonas.gorski: refreshed patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* treewide: drop target board_name functionsMathias Kresin2017-07-151-9/+0
| | | | | | They are not used any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: populate boardname and model earlierMathias Kresin2017-07-151-0/+0
| | | | | | | | | | | | | For targets using the generic board detection and board specific settings in diag.sh, the board name is still unset at the time the set_state() provided by diag.sh is called by 10_indicate_preinit. Change the execution order to ensure the boardname is populated before required the first time. Do the target specific board detection as early as possible, directly followed by the generic one to allow a seamless switch to the generic function for populating /tmp/sysinfo/. Signed-off-by: Mathias Kresin <dev@kresin.me>
* brcm63xx: add support for the Actiontec R1000H gatewayAnthony Sepa2017-06-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | SOC: Broadcom BCM6368 (2 * Broadcom BMIPS4350 V3.1 / 400 MHz) Flash size: 32MB (split 16/16 dual boot) RAM size: 64MB Wireless: BCM432x 802.11a/b/g/n(pci) Ethernet: Broadcom BCM53115 USB: 1 x USB 2.0 Known issues: - Unable to detect 53115 switch attached to MDIO. Not supported - No support for the cable port More info on the device and the research can be found at: http://www.actiontec.com/212.html Same FCC ID as: https://wikidevi.com/wiki/Actiontec_V1000H_(Telus) Signed-off-by: Anthony Sepa <anthonysepa@yahoo.ca> [jonas.gorski: fix commit subject/message] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: CPVA502+: fix userspace supportDaniel Gonzalez Cabanelas2017-02-281-1/+1
| | | | | | Fix board name typo, fix network configuration and add a led trigger. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
* brcm63xx: Add Observa VH4032N supportDaniel Gonzalez Cabanelas2017-02-091-0/+3
| | | | | | | | | | | | | Add support for the Observa Telecom VH4032N router. This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB host ports. The wifi chip is an onboard Broadcom BCM43222. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> [jonas.gorski: use gpio-hog instead of abusing ephy-reset] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add support for Pirelli/ADB P.DG AV4202NPaul Wassi2017-02-091-0/+3
| | | | | | | This patch adds support for the ADB P.DG AV4202N aka Pirelli PRG AV4202N. Signed-off-by: Paul Wassi <p.wassi@gmx.at> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: switch to board based failsafe networkingJonas Gorski2016-08-131-37/+0
| | | | Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* brcm63xx: add initial support for Netgear EVG2000Graham Fairweather2016-06-031-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Netgear EVG2000 VoIP Gateway to the bcm63xx targets. This device was not sold to the general public, but rather is/was provided by telcos to customers in Sweden, Australia, Singapore and other parts of asia. Known issues: - Unable to detect 53115 switch. This appear to be a problem with probing for the PHY using MDIO and results in error 5. Doesn't seem to be a problem with the configuration, and could use someone with experience to have a look at it. - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver fails to load the firmware for the 4322, so 802.11n is not supported. More info on the device and the research can be found at: https://wiki.openwrt.org/toh/netgear/evg2000 https://wikidevi.com/wiki/Netgear_EVG2000 https://github.com/Xotic750/mirror-lede/tree/evg2000 https://forum.openwrt.org/viewtopic.php?id=63950 Signed-off-by: Graham Fairweather <xotic750@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: remove obsolote preinit scripts and fix preinit iface scriptÁlvaro Fernández Rojas2016-06-034-84/+23
| | | | | | | | | | These scripts were causing ip issues in the latest version of LEDE: https://gist.github.com/Noltari/6d20d8bcbe236caf516c0a73f5477d00 Fixes preinit iface script by making eth0 the default ifname and only changing it to eth1 for the devices that specifically need it. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: add support for Huawei HG622Jonas Gorski2016-01-182-0/+4
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48305
* brcm63xx: Add NuCom R5010UNv2 supportJonas Gorski2015-12-021-0/+3
| | | | | | | | | | | | | | | | | This patch adds support for the NuCom R5010UNv2. It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used for the profile of the router. It's worth mentioning this board was affected by a bug solved with https://dev.openwrt.org/changeset/46707 Tested-by: Angel Fontan <angel.fontan@gmail.com> Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47697
* brcm63xx: add Comtrend VR-3026e supportJonas Gorski2015-08-302-0/+4
| | | | | | | | | | Add support for Comtrend VR-3026e v1. The device is almost identical to the Comtrend VR-3025un. Signed-off-by: Martin Tesar <tesarmar@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46752
* brcm63xx: Add support for Plusnet 2704NJonas Gorski2015-08-051-0/+3
| | | | | | | | BCM6318: add support for Plusnet / Sagem 2704N (V1) Signed-off-by: Matt Goring <matt.goring@googlemail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46562
* brcm63xx: fix failsafe lan and status led for DSL-274xB rev. F1Jonas Gorski2015-05-211-0/+1
| | | | | | | | | Add it to the appropriate places so the power led properly works and ethernet is properly configured for failsafe. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45709
* brcm63xx: Add Huawei HG655b supportJonas Gorski2015-05-211-0/+3
| | | | | | | | | | | | | | | This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45708
* brcm63xx: add missing bcm96329bhr profile and dtsJonas Gorski2015-04-211-0/+3
| | | | | | | | Hopefully the last missing board. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45557
* brcm63xx: move DSL-275XB to DTJonas Gorski2015-03-301-0/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45168
* brcm63xx: move bcm6318 reference boards to DTJonas Gorski2015-03-301-0/+6
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45167
* brcm63xx: move VG50 to DTJonas Gorski2015-03-301-3/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45166
* brcm63xx: move V2110 to DTJonas Gorski2015-03-301-3/+3
| | | | | | | | Also readd image generation which was accidentally dropped in r43364. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45165
* brcm63xx: fix bcm96328avng board nameJonas Gorski2015-03-251-1/+1
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44994
* brcm63xx: fix bt v2500v dts based detectionJonas Gorski2015-03-251-4/+1
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44993
* brcm63xx: move RTA770(B)W to dtsJonas Gorski2015-03-251-6/+6
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44992
* brcm63xx: move MAGIC to dtsJonas Gorski2015-03-251-3/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44991
* brcm63xx: move CPVA502+ to dtsJonas Gorski2015-03-251-3/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44990
* brcm63xx: move dg834g v4 to dtsJonas Gorski2015-03-251-3/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44989
* brcm63xx: move dsl-2640u to dtsJonas Gorski2015-03-251-3/+3
| | | | | | | | Also build image again(?). Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44988
* brcm63xx: move bcm963268bu_p300 to dtsJonas Gorski2015-03-251-3/+3
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44987
* brcm63xx: Add BT Home Hub 2A support.Jonas Gorski2015-03-251-0/+3
| | | | | | | | | | | | | | | | | | Support for the BT HomeHub 2.0 Type A. This router was manufactured by Thomson, and it's BCM6358 based. The leds are controled by two chained HC594, all working ok. The BCM5325 switch has the RESET# pin wired to the GPIO15, but currently there is no way to tell the b53 driver how to get this gpio number in brcm63xx, therefore swconfig won't use it when performing a switch reset. The patch was tested with several firmwares, and all except unsupported stuff (i.e xDSL) works pretty well. Tested-by: Tahir <tahir00ali@gmail.com> Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 44985
* brcm63xx: call brcm63xx_detect explicitlyJonas Gorski2015-03-162-2/+2
| | | | | | | | | | Now that we have converted all users of global variables to use brcm63xx_board_name, we can savely convert the implicit call to detect in brcm63xx.sh to a single, explicit call in preinit. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44840
* brcm63xx: move preinit ifname detection to the preinit scriptJonas Gorski2015-03-162-100/+40
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44839
* brcm63xx: remove obsolete brcm63xx_has_reset_buttonJonas Gorski2015-03-161-33/+0
| | | | | | | | | r37000 made button kmods loaded from generic code, so we don't use it anymore for deciding to load them. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44838
* brcm63xx: set status leds from within diag.shJonas Gorski2015-03-161-34/+0
| | | | | | | | | Instead of setting them up on invocation of brcm63xx_detect, set them when calling diag.sh based. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44837
* brcm63xx: add missing board_ids to legacy_detectJonas Gorski2015-03-161-0/+21
| | | | | | | | These boards do not have a corresponding dts file yet. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44835
* brcm63xx: add device tree based board detectionJonas Gorski2015-03-161-63/+154
| | | | | | | | | | | | Use the device tree model property for detecting the board instead of board id from nvram if present. Since we can now directly detect the DVA-G3810BN, we can remove the extra check for it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44834
* brcm63xx: populate /tmp/sysinfoJonas Gorski2015-03-161-37/+176
| | | | | | | | | Take full board name from devicetree, if present. Provide a method for retrieving the board name. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44833
* brcm63xx: base-files: rename board_name to board_idJonas Gorski2015-03-161-5/+5
| | | | | | | | | Rename board_name to board_id to prepare for using board_name as a proper name for the board. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44832
* brcm63xx: Add DGND3700 v1 / DGND3800B supportJonas Gorski2015-03-161-0/+5
| | | | | | | | | | | | | | | | | This adds support for the Netgear DGND3700 v1 and DGND3800B. DGND3700 v1 and DGND3800B are exactly the same router, only one difference, the factory firmware. This patch produces two factory firmwares for each router. The router includes an onboard NAND flash for extra storage. NAND is currently not supported in bcm63xx, so no code added for this part. The NOR flash (32MB) is enough for storing an openwrt firmware. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> [jogo: Add back commit message from v1] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44831
* brcm63xx: add preliminary support for D-Link DSL-2751B E1Jonas Gorski2014-08-011-0/+5
| | | | | | | | | | | | Mostly works except for USB led. Flashing not tested yet. Mostly as an example for the sprom fixup code. Fixup values taken from GPL tarball by comparing bcm43217_map.c with the struct in sprom.c. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41944
* brcm63xx: Add support for ADB P.DG A4001NJonas Gorski2014-07-271-0/+5
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41852
* brcm63xx: Add support for Huawei HG520vJonas Gorski2014-07-271-0/+5
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41851
* brcm63xx: Add support for ZyXEL P870HW-51a v2Jonas Gorski2014-07-271-0/+5
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41850
* brcm63xx: Add support for Comtrend VR-3025unJonas Gorski2014-07-271-0/+5
| | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41848
* brcm63xx: Add support for Comtrend VR-3025uJonas Gorski2014-07-271-0/+5
| | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41847
* brcm63xx: base-files: order board names alphabeticallyJonas Gorski2014-07-121-56/+56
| | | | | | | | Restore alphatetical order in uci-defaults scripts and brcm63xx.sh Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41590
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 04:48:22 +0000