aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx/base-files
Commit message (Collapse)AuthorAgeFilesLines
* brcm47xx: fix switch port order for Netgear WN2500RP V1Walter Sonius2020-01-211-0/+5
| | | | | | | | | | | | | | The Netgear WN2500RP V1 switch0 already works for LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: 4 / 3 / 2 / 1 WAN port is absent on this device and therefore removed from switch config. Signed-off-by: Walter Sonius <walterav1984@gmail.com> [move block to maintain alphabetic sorting] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 098cbc68ee23db589ed6f0d081fe26cc385462f2)
* brcm47xx: fix switch port order for Netgear WNR3500 V2Walter Sonius2020-01-211-0/+1
| | | | | | | | | | | | The Netgear WNR3500 V2 switch0 already works for WAN/LAN however the port order for the LAN ports is inverted. Correct physical port order watched from the back of the device is: Internet / 4 / 3 / 2 / 1 this resembles the Linksys E3000 V1. Verfied with imagebuilder edit FILES=/etc/board.d/01_network Signed-off-by: Walter Sonius <walterav1984@gmail.com> (cherry picked from commit cf2f1fc6871da0320afeefaa799af87fc7c0d1db)
* brcm47xx: add switch configuration for WNR3500LOlli Asikainen2019-12-111-1/+2
| | | | | | | | | | | | | | | | | | | | | Netgear WNR3500L is an already supported device, but out of the box, the device has no switch configuration and there is no wan. The correct configuration for this specific model is similar to some other models. This simple commit adds the correct switch and the out-of-the-box experience is improved. Experimentally determined: Port 0 => WAN Port 1..4 => LAN Port 5..7 => unused Port 8 => CPU Signed-off-by: Olli Asikainen <olli.asikainen@gmail.com> Tested-by: Fabian Zaremba <fabian@youremail.eu> [added port mapping to commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit deb835849aeb713968aaa48bf046101140ab4825)
* brcm47xx: fix switch port labels for Asus WL500GP V2Michael Heimpold2019-10-151-1/+5
| | | | | | | | The switch port naming in LuCI does not fit the physical numbers on the front of this device. Since this is confusing, fix it. Signed-off-by: Michael Heimpold <mhei@heimpold.de> (cherry picked from commit e56e5a454e729f1067ba1fc8acfc18b99ccb88b4)
* brcm47xx: sysupgrade: fix device model detectionRafał Miłecki2019-09-261-2/+2
| | | | | | | | | $(board_name) was providing content on "boardtype" (and optionally "boardnum") NVRAM values. That function requires & expects more specific and detailed model name extracted from the /proc/cpuinfo. Fixes: f12a32630ff5 ("treewide: use the generic board_name function") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* brcm47xx: sysupgrade: support Luxul firmware formatDan Haab2019-09-161-0/+82
| | | | | | | Allow flashing Luxul devices using vendor firmware format. Signed-off-by: Dan Haab <dan.haab@legrand.com> (cherry picked from commit 95240c4933607544ad1788c2ed19843dd96bccbb)
* brcm47xx: extend firmware validationRafał Miłecki2019-09-121-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | This provides TRX validation result, so final JSON may look like: { "tests": { "fwtool_signature": true, "fwtool_device_match": true, "trx_valid": true }, "valid": true, "forceable": true } It also prevents users from installing broken firmware files, e.g.: root@OpenWrt:/# sysupgrade -F -n /tmp/TZ Image metadata not found Invalid image type. Please use firmware specific for this device. Image check failed but --force given - will update anyway! Commencing upgrade. Closing all shell sessions. Firmware image is broken and cannot be installed Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e68c1cebd1d87ce60f0646688e437e83081e2322)
* brcm47xx: cosmetic fix in model detectionPaul Wassi2018-08-131-1/+1
| | | | | | | | In "brcm47xx: rework model detection" the file 01_detect was moved to 01_network, therefore also update the warning message in case everything fails. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* brcm47xx: rework model detectionJo-Philipp Wich2018-07-302-18/+25
| | | | | | | | | | | | | | | | | | | | | | | | | On brcm47xx boards, the model ID is the combination of the "boardtype" nvram variable and an optional supplemental "boardnum" variable while the human readable model name is usually exposed in the "machine" field of the /proc/cpuinfo file. Move the extraction of the board nvram variables and model name string into the 01_sysinfo file and rework the 01_detect board configuration script to solely use the prepared sysinfo values without performing own detection logic. As a consequence, we can drop the ucidef_set_board_id() and ucidef_set_model_name() invocations in favor to the generic behaviour which copies the /tmp/sysinfo/{board_name,model} values into the board.json "id" and "name" fields respectively. Since "01_detect" only contains network configuration logic after this change, move it to "01_network" and rename the contained "detect_by_xxx" functions to "configure_by_xxx" instead, to avoid potential confusion. Fixes FS#1576 Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcm47xx: add switch port mapping to Asus WL-500WMirko Parthey2018-05-241-1/+1
| | | | | | | | | | | Switch ports 0..3 are connected to external ports LAN{1..4} in sequence, switch port 4 is not used, and switch port 5 is connected to the CPU. The WAN port is attached to the CPU's second network interface; it has no connection to the internal switch. Reuse the "Dell TrueMobile 2300" entry, which describes the same mapping. Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
* brcm47xx: fix switch port mapping on D-Link DIR-330Antony Black2017-11-161-0/+1
| | | | | | | | D-Link DIR-330 is clone of ASUS WL500GP2, by default conf the WAN port is eth1, it's not working cus eth1 not soldered and wan port function performs 5th port of the switch. Signed-off-by: Antony Black <gtrtfm@gmail.com>
* brcm47xx: fix switch port mapping on Asus RT-N16Tim Thorpe2017-11-101-1/+1
| | | | | | | On the Asus RT-N16, the ports are not mapped the in the same way as the RT-N12. It is, however, the same as the Linksys E3000v1. Signed-off-by: Tim Thorpe <timfthorpe@gmail.com>
* Revert "brcm47xx: Fix sysupgrade with E1200v1"Hauke Mehrtens2017-09-251-1/+0
| | | | | | | | | | This reverts commit 31e9445b7e614f54daa0caf3148e223d088311ab. "Linksys E1200 V1" is not a valid board name, as the brcm47xx arch code can not detect this device. Stefan Lippers-Hollmann also found a typo in this patch "cybetran" instead of "cybertan". Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm47xx: Fix sysupgrade with E1200v1Rosen Penev2017-09-241-0/+1
| | | | | | Entry was missing for some reason. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* brcm47xx: fix switch port mapping on Asus RT-N12 and RT-N16 modelsJo-Philipp Wich2017-07-211-0/+2
| | | | | | | | | | | | | On Asus RT-N12 and RT-N16 models, the WAN and LAN4 ports are swapped in the initial switch configuration since the presets present in nvram appear to be wrong. Add special casing for these models to detect_by_model() in order to ensure a proper switch configuration. Fixes FS#502. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* treewide: use only board_name function to get nameMathias Kresin2017-07-151-1/+1
| | | | | | | | | | | | Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree compatible string directly. Always use the board_name function to get the board name. The admswconfig package still reads /proc/cpuinfo directly. The code looks somehow broken and the whole adm5120 which uses this package looks unmaintained. Leave it as it is for now. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: use the generic board_name functionMathias Kresin2017-07-151-5/+1
| | | | | | Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: do board detection during preinitMathias Kresin2017-07-151-0/+12
| | | | | | Do the board detection during preinit to unify it across all targets. Signed-off-by: Mathias Kresin <dev@kresin.me>
* brcm47xx: use DMZ LED as status indicatorMirko Parthey2017-07-021-15/+7
| | | | | | | | | | | | | On the Linksys WRT54GSv1, the Power LED flickers in the "off" state. Indicate status using the DMZ LED if available, since it has solid "on" and "off" states. This change was tested on the WRT54GSv1, but may also affect other brcm47xx devices. Fixes FS#793. Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
* brcm47xx: remove target specific network preinit configJo-Philipp Wich2017-05-272-32/+0
| | | | | | | | | The generic preinit code is now able to setup network and switch vlan settings from the /etc/board.json file, therefor drop the target specific code. Fixes FS#790. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* treewide: remove bad local shell variable declarationsJo-Philipp Wich2016-09-242-9/+9
| | | | | | | Local variable declarations outside of functions are illegal since the Busybox update to v1.25.0, therfore remove them from the appropriate places. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcm47xx: fix wgt634u port assignment, broken since openwrt r47866Russell Senior2016-05-101-1/+1
| | | | Signed-off-by: Russell Senior <russell@personaltelco.net>
* brcm47xx: add proper switch port mapping for WRT610Nv2 / Linksys E3000v1Jo-Philipp Wich2016-01-271-0/+5
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48511
* brcm47xx: fix switch config for devices with WAN port 0Rafał Miłecki2015-12-181-0/+14
| | | | | | | | | Commit r47866 dropped default values which were handling WAN interface at port 0. Fix it by handling 2 more cases on NVRAM values. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47932
* all: drop old uci-defaults.shJo-Philipp Wich2015-12-111-1/+1
| | | | | | | | | Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867
* brcm47xx: migrate network config to board detection frameworkJo-Philipp Wich2015-12-113-241/+173
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47866
* brcm47xx: add Netgear WN2500RP supportRafał Miłecki2015-12-021-0/+2
| | | | | | | | We generate V1 image only for now. We lack buttons support for V2. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47682
* brcm47xx: sysupgrade: drop useless shift in platform.shRafał Miłecki2015-06-061-1/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45913
* brcm47xx: extract TRX from image on the flyJohn Crispin2015-06-051-7/+8
| | | | | | | | | | Extracting TRX to separated file in /tmp/ requires extra RAM which may not be available on some chepaer devices. Instead of that lets pass a proper extracting command to the default_do_upgrade. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45901
* brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)Rafał Miłecki2015-04-171-2/+2
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45472
* brcm47xx: rework vendor fw handling to don't duplicate upgrade callsRafał Miłecki2015-04-161-14/+10
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45470
* otrx: change command line API to start with a modeRafał Miłecki2015-04-141-3/+3
| | | | | | | | This will allow adding more modes without options conflict. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45443
* brcm47xx: verify also standard TRX images during sysupgradeRafał Miłecki2015-04-091-0/+4
| | | | | | | | It allows detecting data corruption for plain TRX as well. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45318
* brcm47xx: fix WRT300N devices magics for sysupgrade checkRafał Miłecki2015-04-091-1/+2
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45317
* brcm47xx: switch to the otrx for verifying TRX imagesRafał Miłecki2015-04-091-16/+2
| | | | | | | | This adds checking CRC32 of provided firmware image. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45316
* brcm47xx: image: share function checking TRX in provided firmwareRafał Miłecki2015-03-311-6/+18
| | | | | | | | This will allow us to calculate crc32 in a shared code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45202
* brcm47xx: fix checking cross-vendors firmware imagesRafał Miłecki2015-03-311-48/+41
| | | | | | | | | This change won't allow installing e.g. Netgear firmware on Linksys device. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45174
* brcm47xx: display all errors (not just the 1st one) when checking imageRafał Miłecki2015-03-311-10/+8
| | | | | | | | This way people forcing upgrade will know what may go wrong. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45172
* brcm47xx: recognize more device specific firmwaresRafał Miłecki2015-03-311-0/+34
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45171
* brcm47xx: compare provided firmware magic with device magicRafał Miłecki2015-03-301-2/+34
| | | | | | | | | This makes sysupgrade reject firmware images for different devices. Right now only support for 2 sample devices is implemented. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45170
* brcm47xx: support for flashing CHK and CyberTAN imagesRafał Miłecki2014-12-301-5/+28
| | | | | | | | | This will allow simple sysupgrade-s including simpler reverting to the original firmware. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43799
* brcm47xx: verify if CHK/CyberTAN contains valid TRXRafał Miłecki2014-12-301-1/+16
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43798
* brcm47xx: extract magics from specific upgrade images (and still reject them)Rafał Miłecki2014-12-151-1/+17
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43718
* add "preinit_regular" diag.sh set_state argumentJohn Crispin2014-12-151-0/+3
| | | | | | | | | | | | This new argument is used right after starting regular preinit (which happens if failsafe wasn't triggered). The main purpose of "preinit" argument is to indicate that failsafe can be triggered, however we were missing a way to inform user that we don't wait for a trigger anymore. With this change it's clear when failsafe mode can be triggered. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43715
* brcm47xx: detect (and still reject for now) CyberTAN fw formatRafał Miłecki2014-12-151-0/+12
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43714
* brcm47xx: use separated function in upgrade to detect file typeRafał Miłecki2014-12-151-3/+22
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43708
* scripts: fix wrong usage of '==' operatorJohn Crispin2014-10-141-1/+1
| | | | | | | | | | | | | | [base-files] shell-scripting: fix wrong usage of '==' operator normally the '==' is used for invoking a regex parser and is a bashism. all of the fixes just want to compare a string. the used busybox-ash will silently "ignore" this mistake, but make it portable/clean at least. this patch does not change the behavior/logic of the scripts. Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 42911
* brcm47xx: don't create named switch_vlan sectionsHauke Mehrtens2014-07-261-2/+0
| | | | | | | | | | | It doesn't seem to be used anywhere, it's incompatible with other targets and can be confusing. People may think they need to update section name every time they change VLAN ID (well, even I was doing that). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 41835
* brcm47xx: fix special board handling for some devicesHauke Mehrtens2014-07-141-19/+7
| | | | | | | | | | | Some devices were renamed when converted from diag to in kernel board detection and it was not changed in netconfig. Devices not in the kernel board detection are removed now. This should close: #17111, #16968, #13202 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 41663
* brcm47xx: get switch name from swconfig firstHauke Mehrtens2014-07-051-3/+5
| | | | | | | | | Without this patch the switch config for the adm switch did not worked, because hey are not names eth0. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 41512
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 17:29:57 +0000