aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bmips
Commit message (Collapse)AuthorAgeFilesLines
* bmips: add support for Comtrend VG-8050Álvaro Fernández Rojas2023-06-164-0/+258
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend VG-8050 is a wifi gigabit ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM63169 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 128 MB DDR - Flash: 128 MB NAND - LAN switch: Broadcom BCM53125, 5x 1Gbit - Wifi 2.4 GHz: SoC (BCM63268) 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 2x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 47cc09aa7a9a12cb7b18ef96f0b5d0bcb5d84b9e)
* bmips: dts: dgnd3700: fix WAN portÁlvaro Fernández Rojas2023-06-151-1/+1
| | | | | | | | All switch ports are labeled as port@address so let's follow the same pattern. Fixes: ed79519b8d89 ("bmips: add support for Netgear DGND3700 v1, DGND3800B") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit d9210c5ff797896317d1b6293a5ad768b7482cfe)
* bmips: add support for Sercomm AD1018Álvaro Fernández Rojas2023-06-155-0/+353
| | | | | | | | | | | | | | | | | | | | | | | | | The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (v1) / 128 MB (v2) DDR - Flash: 128 MB NAND - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn - USB: 1x 2.0 - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 38ebb2eafde604ff6d9b0021d1d21208070a2d09)
* bmips: bump LOADER_ENTRY to RAM + 16MÁlvaro Fernández Rojas2023-06-151-1/+1
| | | | | | | | This is needed on devices like Sercomm AD1018 for booting recent kernels due to bigger kernels. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 434434ca4748ba669176ce38b70a6525f90598b6)
* bmips: add support for Actiontec R1000HDaniel González Cabanelas2023-06-155-0/+241
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Actiontec R1000H is a gigabit wifi router, 2.4 GHz single band with two external antennas. It comes with a coaxial HomePNA port. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 32 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - LAN coaxial : 1x HPNA 3.1, CG3211 + CG3213 - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 1x 2.0 - Buttons: 2x, 1 reset - LEDs: 7x - UART: yes The HPNA hardware probably needs a firmware to make the coaxial port work. In the OEM firmware, it's apparently sent with an utility (inhpna) through the ethernet port. Installation via CFE web UI: 1. Connect the UART serial port. 2. Power on the router and press enter at the console prompt to stop the bootloader. 4. Browse to http://192.168.1.1 and upload the OpenWrt CFE firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit e1a55de7a7eafd40a4fab5f29153a1a3c3606818)
* bmips: switch to standard nand_do_upgradeÁlvaro Fernández Rojas2023-06-154-45/+4
| | | | | | | | Now that JFFS2 cleanmarkers are supported on the standard nand_do_upgrade function we can start using it on bmips. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from 464dfac049daecad145184f8c2dd4a46a7fdd37c)
* bmips: fix NETGEAR DGND3700v2 boot loopÁlvaro Fernández Rojas2023-06-151-0/+1
| | | | | | | | | | | | | The DGND3700v2 renames the cferam bootloader from cferam to cfeXXX, where XXX is the number of firmware upgrades performed by the bootloader. Other bcm63xx devices rename cferam.000 to cferam.XXX, but this device is special because the cferam name isn't changed on the first firmware flashing but it's changed on the subsequent ones. Therefore, we need to look for "cfe" instead of "cferam" to properly detect the cferam partition and fix the bootlop. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 915e914cfaa243ea36f8c7a4f0f045ec890304fa)
* bmips: add support for Comtrend AR-5381uÁlvaro Fernández Rojas2023-06-124-0/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend AR-5381u is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB DDR - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43225 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit bcdf861519)
* bmips: add support for Comtrend WAP-5813nÁlvaro Fernández Rojas2023-06-115-0/+249
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend WAP-5813n is a wifi gigabit router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 64 MB DDR - Flash: 8 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: miniPCI Broadcom BCM4322 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit c3b1ef2dfd)
* bmips: add support for Comtrend VR-3025unÁlvaro Fernández Rojas2023-06-114-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend VR-3025un is a wifi gigabit router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 64 MB DDR - Flash: 8 MB parallel NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43222 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the antenna. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 3baa45fbd8)
* bmips: dgnd3700v1/dgnd3800b: add missing kmod-leds-gpioÁlvaro Fernández Rojas2023-06-111-2/+4
| | | | | | | Commit ed79519b8d89 missed adding kmod-leds-gpio to these devices. Fixes: ed79519b8d89 ("bmips: add support for Netgear DGND3700 v1, DGND3800B") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: image: rename Device/bcm63xx_netgearÁlvaro Fernández Rojas2023-06-112-4/+4
| | | | | | | Every other Device definition in the target is using hyphens instead of underscores. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dts: improve and align device tree filesÁlvaro Fernández Rojas2023-06-1112-71/+40
| | | | | | | Align all the device tree files and follow the same criteria before more devices are ported from bcm63xx and this goes out of control. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Netgear EVG2000Daniel González Cabanelas2023-06-115-1/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with two internal antennas integrated in the main PCB. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 16 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 2x 2.0 - Buttons: 2x, 1 reset - LEDs: 10x - FXS: 2x - UART: yes Installation via CFE web UI: 1. Power off the router and make a temporal TX-RX shortcircuit on the serial pins. 2. Power on the router and wait 3 or more seconds 3. Remove the TX-RX shortcircuit 4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: add support for Netgear DGND3700 v1, DGND3800BDaniel González Cabanelas2023-06-107-0/+334
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Netgear DGND3700 v1 and DGND3800B are the same device but with different factory firmwares. It's an xDSL wifi router with a slim black shiny casing and 4 PCB internal antennas connected via UFL to a miniPCI detachable card. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 128 MB DDR - NOR Flash: 32 MB parallel (CFE and OS) - NAND flash: 128 MB (empty) - Ethernet LAN: 5x 1Gbit - Wifi 2.4 GHz: Broadcom BCM43222 802.11bgn - Wifi 5 GHz: Broadcom BCM43222 802.11abgn - USB: 2x 2.0 - Buttons: 3x, 1 reset - LEDs: 11x - UART: yes Installation via OEM web UI: 1. Open the Netgear administration web interface, by default: http://192.168.0.1 user: admin password: password 2. Look for "upgrade firmware" and proceed 3. Wait some minutes until it finishes Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: add support for Observa VH4032NDaniel González Cabanelas2023-06-105-2/+269
| | | | | | | | | | | | | | | | | | | | | | | | The Observa VH4032N is an xDSL wifi router with a vertical white casing and two internal antennas connected via UFL. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400MHz - RAM: 128 MB DDR - Flash: 32 MB parallel NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4/5 GHz: onboard Broadcom BCM43222 802.11abgn - USB: 3x 2.0 - Buttons: 2x, 1 reset - LEDs: 8x, blue and red - UART: 1x Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bmips: bump LZMA Loader addressÁlvaro Fernández Rojas2023-06-101-1/+1
| | | | | | | | This allows booting bigger ramdisk images via TFTP at the cost of breaking 32M RAM compatibility, but those devices have been unable to boot ramdisks on this target for some time anyway due to not having enough RAM. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: improve kernel patchesÁlvaro Fernández Rojas2023-05-1714-185/+181
| | | | | | | Add missing patch headers and regenerate the ones that contain an obsolete patch header. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: 5.15: comment unused macronix_nand_block_protection_supportChristian Marangi2023-05-121-0/+154
| | | | | | | | | | | | Comment unused function macronix_nand_block_protection_support since it does cause boot problem Fix compilation error: drivers/mtd/nand/raw/nand_macronix.c:220:13: error: 'macronix_nand_block_protection_support' defined but not used [-Werror=unused-function] 220 | static void macronix_nand_block_protection_support(struct nand_chip *chip) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* bmips: fix external interrupt controllerÁlvaro Fernández Rojas2023-04-271-21/+2
| | | | | | | | | - irq_domain_add_simple() can't be used on bmips since interrupts aren't hardcoded with specific offsets for internal and external as opposed to bcm63xx. This is needed to avoid collisions with other interrupts. - remove unused bcm63xx-specific code. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: document GPIO external interruptsÁlvaro Fernández Rojas2023-04-2712-11/+51
| | | | | | | BCM63xx SoCs have an external interrupt controller which can be used for specific GPIO keys. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: increment polled keys interval to 100Álvaro Fernández Rojas2023-04-279-9/+9
| | | | | | | There's no need to poll the gpio keys every 20 ms and the linux kernel documentation suggests 100 ms. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: shg2500: add BCM4360 fallback SPROMÁlvaro Fernández Rojas2023-04-232-2/+16
| | | | | | | | Apart from the embedded BCM63268 wireless, this device has an external BCM4360 connected by PCIe which needs a fallback SPROM. b43 isn't enabled for this device because BCM4360 isn't supported (AC PHY). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dgnd3700v2: add b43 wireless driverÁlvaro Fernández Rojas2023-04-231-0/+1
| | | | | | | | Apart from the embedded BCM6362 wireless, Netgear DGND3700v2 has external BCM43228 wireless connected by PCIe. Fallback SPROM isn't needed for this one because it has a physical SPROM. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: leds-sercomm-msp430: improve driverÁlvaro Fernández Rojas2023-04-231-3/+7
| | | | | | | - Add missing module functions. - Fix infinite pattern trigger by converting negative values to 0. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: enet: add missing module functionsÁlvaro Fernández Rojas2023-04-232-3/+14
| | | | | | | | | - Add missing MODULE_DEVICE_TABLE(). - Switch bcm6348-iudma to module_platform_driver(). - Add missing MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE and MODULE_ALIAS. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: pci: use standard module functionsÁlvaro Fernández Rojas2023-04-233-24/+21
| | | | | | | late_initcall_sync() is no longer needed so standard module functions can be used on all bmips PCI/PCIe drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: drop custom b43-sprom fixupsÁlvaro Fernández Rojas2023-04-232-1199/+0
| | | | | | b43-sprom fixups and no longer used and can be removed from bmips targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: switch to generic bcma/ssb fallback SPROMÁlvaro Fernández Rojas2023-04-2312-64/+12
| | | | | | | | Stop using bmips b43-sprom fixups and switch to generic bcma/ssb fallback SPROMs. This way we don't need to include the b43-sprom fixups on devices without Broadcom wireless. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: pci-bcm6348: load IO resource from DT rangesÁlvaro Fernández Rojas2023-04-183-28/+14
| | | | | | Correctly load IO resource from DT ranges and remove the specific IO resource. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: drop unneeded ath9k fixupÁlvaro Fernández Rojas2023-04-182-243/+1
| | | | | | | We no longer need the custom ath9k fixup now that we're using the standard kmod-owl-loader. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: hg556a: switch to kmod-owl-loaderÁlvaro Fernández Rojas2023-04-183-14/+66
| | | | | | Stop using custom ath9k fixup and switch to standard kmod-owl-loader Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dts: add missing phy modesÁlvaro Fernández Rojas2023-04-105-0/+17
| | | | | | PHY modes should be defined in the device tree for the bcm63xx internal switch. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: remove source-only flagÁlvaro Fernández Rojas2023-04-101-1/+1
| | | | | | | | bmips target is now more stable and it's time to start generating buildbot images in order to receive a wider testing, which will be essential to replace bcm63xx target in the future. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add subtargets for each SoCÁlvaro Fernández Rojas2023-04-1049-382/+2037
| | | | | | | | BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: b43-sprom: fix build when SSB/BCMA disabledÁlvaro Fernández Rojas2023-04-101-16/+16
| | | | | | Fix build of B43 SPROM fallback when SSB or BCMA are disabled. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: allow disabling mdio-mux-bcm6368Álvaro Fernández Rojas2023-04-101-0/+10
| | | | | | This controller is only present on SoCs with B53 MMAP switch. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: switch to LED kernel modulesÁlvaro Fernández Rojas2023-04-093-13/+19
| | | | | | | Disable LED controllers from kernel config and switch to per device kernel modules. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add LED kernel modulesÁlvaro Fernández Rojas2023-04-091-0/+30
| | | | | | | Add BCM6328 and BCM6358 LED kernel modules. This allows selecting the LED controllers only for those devices using them. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add support for Sercomm SHG2500Álvaro Fernández Rojas2023-04-096-1/+776
| | | | | | | | Sercomm SHG2500 is a BCM63168 with 128M of RAM, 256M of NAND, an external BCM53124S switch for the LAN ports and internal/external Broadcom wifi. LEDs are connected to an external MSP430G2513 MCU controlled via SPI. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: use sercomm-pid scriptÁlvaro Fernández Rojas2023-04-092-21/+14
| | | | | | | Make use of sercomm-pid script for generating the Sercomm PID, which avoids having to add an array of hex bytes for every new Sercomm device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: image: rename SERCOMM_VERSION to SERCOMM_FSVERÁlvaro Fernández Rojas2023-04-092-7/+7
| | | | | | | SERCOMM_VERSION is ambiguous and it should be more clear that it refers to the version used for the filesystem. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bcm6362/bcm63268: enable HW RNGÁlvaro Fernández Rojas2023-03-312-0/+24
| | | | | | | This enables the HW Random Number Generator on the BCM6362 and BCM63268 SoCs, which is the same one used on BCM6368 SoC. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bcm6348-enet: register emac driver from iudmaÁlvaro Fernández Rojas2023-03-291-2/+15
| | | | | | | | Register the ethernet driver from iudma, which avoids the attempt to probe the emac driver before iudma and its consequent deferral. The ethernet driver can't work without iudma anyway. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bcm6348-enet: add PHY supportÁlvaro Fernández Rojas2023-03-292-0/+119
| | | | | | | We should ensure that the PHY is properly configured. This is specially needed in devices using the internal PHY for ethernet0. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: add basic BCM6358 ethernet supportÁlvaro Fernández Rojas2023-03-286-0/+1732
| | | | | | | | The MDIO bus is supported but there are errors when trying to probe and configure the external BCM5325E switch through B53 DSA. Therefore, let's add basic ethernet (but working) support for now. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bcm6368-enetsw: refactor probeÁlvaro Fernández Rojas2023-03-281-23/+29
| | | | | | | | | - Switch to devm functions where possible. - Fix probing when no resets provided. - Properly check pointers (IS_ERR_OR_NULL/PTR_ERR). - Add probe info. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bcm6368-enetsw: remove unneeded variablesÁlvaro Fernández Rojas2023-03-281-35/+16
| | | | | | Change the code to use defines instead of variables. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: bcm6368-enetsw: harmonize dev variablesÁlvaro Fernández Rojas2023-03-281-76/+83
| | | | | | | | The current implementation of bcm6368-enetsw is a mess of dev, ndev and kdev variables, which have refer to different things depending on the function. This commit harmonizes it and resolves the issue. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: sercomm,h500-s: add Quantenna gpio switchÁlvaro Fernández Rojas2023-03-281-0/+16
| | | | | | | Sercomm H500-s has a Quantenna SoC for external wifi which can be activated or deactivated through GPIO #20. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 18:59:26 +0000