aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm63xx
Commit message (Collapse)AuthorAgeFilesLines
* bcm63xx: switch to Kernel 5.10Paul Spooren2022-02-271-2/+2
| | | | | | | | Bump the last missing target to Kernel 5.10. While this requires a work around to boot it will allow more people to test the new Kernel before the upcomming release. Signed-off-by: Paul Spooren <mail@aparcar.org>
* bcm63xx: fix booting with Kernel 5.10Paul Spooren2022-02-271-0/+18
| | | | | | | | This is a workaround to make the target overall bootable. With this more people should be able to test the Kernel 5.10 and report further issues. Suggested-by: Daniel González Cabanelas <dgcbueu@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* bcm63xx: Fast 2704n: configure the WAN portDaniel González Cabanelas2022-02-261-2/+2
| | | | | | | | | | | | The Sagem/Plusnet F@ST2704N has a red label in ethernet port 4. Its purpose is to be used as Fibre/WAN with the stock firmware. Configure the Eth4 as WAN. Fixes: fbbb977772 (brcm63xx: Tune the network configuration for several routers) Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bcm63xx: Remove patch already in Linux stableHauke Mehrtens2022-02-011-34/+0
| | | | | | | Remove the 434-nand-brcmnand-fix-OOB-R-W-with-Hamming-ECC.patch, it was already applied to Linux 5.10.37 and is not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-014-18/+18
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.4 to 5.4.174John Audia2022-01-284-18/+18
| | | | | | | | | | | | | | Removed upstreamed patches: layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.4.174&id=65816c1034769e714edb70f59a33bc5472d9e55f Build system: x86_64 Build-tested: ramips/mt7621 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: filter out both Clang and LLD versionsSergey Ryazanov2021-12-171-1/+0
| | | | | | | | Both CLANG_VERSION and LLD_VERISON are autogenerated runtime configuration options, so add them to the kernel configuration filter and remove from generic and per-target configs to keep configs clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* treewide: use uniform vendor value for british telecomMoritz Warning2021-12-121-3/+3
| | | | | | British Telecom is mostly known as BT. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* kernel: bump 5.4 to 5.4.162John Audia2021-11-284-18/+18
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/mt7621* *I am hit with the binutils 2.37 bug so I had to revert 7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to downgrade to 2.35.1 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.82John Audia2021-11-274-18/+18
| | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0014-ARM-dts-NSP-Fix-mpcore-mmc-node-names.patch Manually rebased: ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.159John Audia2021-11-201-1/+1
| | | | | | | | | Manually rebased: generic-backport/850-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch All other patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.79Rui Salvaterra2021-11-131-1/+1
| | | | | | | | | Manually rebased: generic/backport-5.10/810-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch Tested-by: John Audia <graysky@archlinux.us> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.74Rui Salvaterra2021-10-211-1/+1
| | | | | | Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.154John Audia2021-10-211-1/+1
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* bcm63xx: remove memcpy from mac assignmentRosen Penev2021-09-212-6/+16
| | | | | | | | | With GCC11, memcpy doesn't work here as it assumes a size of 0. Use ioremap to avoid it. Fixed parameter type to match board_get_mac_address. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: move two symbols to the generic kconfigsRui Salvaterra2021-08-291-1/+0
| | | | | | | CONFIG_RCU_{NEED_SEGCBLIST,STALL_COMMON} are set basically everywhere. Move them to the generic kconfigs. And resort the generic kconfigs while at it. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.50Rui Salvaterra2021-07-171-3/+3
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.132John Audia2021-07-171-3/+3
| | | | | | | | | | | | | | | Manually rebased: layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* bcm63xx: drop USB LEDs for Technicolor TG582N / ADB P.DG A4001NDaniele Castro2021-06-051-6/+1
| | | | | | | | | | | | | | | | Remove the USB status red and green LEDs for - ADB P.DG A4001N A-000-1A1-AX - Technicolor TG582N - Technicolor TG582N Telecom Italia After having mounted an SMD socket for the flash memory for JTAG reverse engineering, and so be able to easly swap between OpenWrt and the stock FW, it turned out that the stock FW does not light up the red and green USB LEDs exactly as I remembered. Signed-off-by: Daniele Castro <danielecastro@hotmail.it> [improve commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.119John Audia2021-05-232-35/+1
| | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch bcm63xx/patches-5.4/434-nand-brcmnand-fix-OOB-R-W-with-Hamming-ECC.patch* Removed/code was included upstream and therefore redundant: ramips/patches-5.4/999-fix-pci-init-mt7620.patch All other patches automatically rebased. * update_kernel.sh did not flag this yet it was included in 5.4.119[1], as a result of the rebase, I removed my testing lines since I did not go back to test built or to run test 5.4.119 with the removed patch present. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.4.119&id=e5b3e69eb36ac1178a7a2392616fd29afd288c4e Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.37Rui Salvaterra2021-05-142-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Automatically refreshed: ath79/patches-5.10/0032-MIPS-ath79-sanitize-symbols.patch bcm63xx/patches-5.10/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch bcm63xx/patches-5.10/434-nand-brcmnand-fix-OOB-R-W-with-Hamming-ECC.patch bmips/patches-5.10/001-v5.11-mips-bmips-select-ARCH_HAS_RESET_CONTROLLER.patch bmips/patches-5.10/041-v5.13-mtd-rawnand-brcmnand-fix-OOB-R-W-with-Hamming-ECC.patch bmips/patches-5.10/202-mips-bmips-disable-ARCH_HAS_SYNC_DMA_FOR_CPU_ALL.patch bmips/patches-5.10/600-mips-bmips-add-pci-support.patch generic/backport-5.10/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch generic/hack-5.10/301-mips_image_cmdline_hack.patch generic/hack-5.10/402-mtd-blktrans-call-add-disks-after-mtd-device.patch generic/hack-5.10/902-debloat_proc.patch generic/pending-5.10/300-mips_expose_boot_raw.patch generic/pending-5.10/495-mtd-core-add-get_mtd_device_by_node.patch generic/pending-5.10/630-packet_socket_type.patch ipq806x/patches-5.10/0072-add-ipq806x-with-no-clocks.patch ipq806x/patches-5.10/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch lantiq/patches-5.10/0001-MIPS-lantiq-add-pcie-driver.patch lantiq/patches-5.10/0023-NET-PHY-add-led-support-for-intel-xway.patch lantiq/patches-5.10/0152-lantiq-VPE.patch Deleted (reverse-appliable): bmips/patches-5.10/052-v5.13-gpio-guard-gpiochip_irqchip_add_domain-with-GPIOLIB_.patch generic/backport-5.10/499-v5.13-mtd-don-t-lock-when-recursively-deleting-partitions.patch Deleted (alternative upstream fix): ramips/patches-5.10/330-fix-pci-init-mt7620.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.36Rui Salvaterra2021-05-141-5/+5
| | | | | | | | | | | | | | | | | | | | | Automatically refreshed: apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch bcm63xx/patches-5.10/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch generic/pending-5.10/465-m25p80-mx-disable-software-protection.patch ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch ipq806x/patches-5.10/101-dwmac-ipq806x-qsgmii-pcs-all-ch-ctl.patch ipq806x/patches-5.10/106-5.13-net-stmmac-Set-FIFO-sizes-for-ipq806x.patch Deleted (empty or reverse-appliable): ath79/patches-5.10/411-spi-ath79-add-SPI_MASTER_GPIO_SS-flag.patch ath79/patches-5.10/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch ath79/patches-5.10/0054-spi-sync-up-initial-chipselect-state.patch Manually refreshed: ath79/patches-5.10/0033-spi-ath79-drop-pdata-support.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: Activate FORTIFY_SOURCE for MIPS kernel 5.4Hauke Mehrtens2021-04-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_FORTIFY_SOURCE=y is already set in the generic kernel configuration, but it is not working for MIPS on kernel 5.4, support for MIPS was only added with kernel 5.5, other architectures like aarch64 support FORTIFY_SOURCE already since some time. This patch adds support for FORTIFY_SOURCE to MIPS with kernel 5.4, kernel 5.10 already supports this and needs no changes. This backports one patch from kernel 5.5 and one fix from 5.8 to make fortify source also work on our kernel 5.4. The changes are not compatible with the 306-mips_mem_functions_performance.patch patch which was also removed with kernel 5.10, probably because of the same problems. I think it is not needed anyway as the compiler should automatically optimize the calls to memset(), memcpy() and memmove() even when not explicitly telling the compiler to use the build in variant. This increases the size of an uncompressed kernel by less than 1 KB. Acked-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: switch the timer frequency to 100 HzRui Salvaterra2021-04-212-4/+0
| | | | | | | | Some targets select HZ=100, others HZ=250. There's no reason to select a higher timer frequency (and 100 Hz are available in every architecture), so change all targets to 100 Hz. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: remove redundant ubifs kconfig symbolsRui Salvaterra2021-04-211-4/+0
| | | | | | | For the targets which enable ubifs, these symbols are already part of the generic kconfigs. Drop them from the target kconfigs. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.30Rui Salvaterra2021-04-161-2/+2
| | | | | | | | | | | | | | | | | | | | | Deleted (reverse-applicable): mvebu/patches-5.10/101-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch Automatically refreshed: bcm63xx/patches-5.10/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch generic/backport-5.10/610-v5.13-02-netfilter-Fix-fall-through-warnings-for-Clang.patch generic/backport-5.10/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch generic/hack-5.10/204-module_strip.patch generic/hack-5.10/902-debloat_proc.patch generic/pending-5.10/203-kallsyms_uncompressed.patch generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch generic/pending-5.10/920-mangle_bootargs.patch mediatek/patches-5.10/115-dts-bpi64-add-snand-support.patch mediatek/patches-5.10/602-arm64-dts-mediatek-Split-PCIe-node-for-MT2712-MT7622.patch mediatek/patches-5.10/900-dts-mt7622-bpi-r64-aliases-for-dtoverlay.patch ramips/patches-5.10/323-mt7621-memory-detect.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.26Rui Salvaterra2021-03-261-2/+2
| | | | | | | | | | | | | | Automatically refreshed: ath79/patches-5.10/471-mtd-cfi_cmdset_0002-AMD-chip-0x2201-write-words.patch bcm63xx/patches-5.10/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch generic/hack-5.10/204-module_strip.patch Run-tested: ath79 (TL-WDR3600) x86_64 (APU2 - ldir) Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: backport ehci overcurrent patchesÁlvaro Fernández Rojas2021-03-242-4/+4
| | | | | | These patches have been accepted for v5.13. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 5.10 to 5.10.24Kevin Darbyshire-Bryant2021-03-241-2/+2
| | | | | | | | Straightforward refresh of patches using update_kernel. Run tested: x86_64 (apu2) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* bcm63xx: AD1018-nor: add NAND flashDaniel González Cabanelas2021-03-081-0/+24
| | | | | | | | | The Sercomm AD1018 has a NAND flash. We recently added support for NANDs in this target. Use the internal NAND as additional storage. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* treewide: remove execute bit and shebang from board.d filesAdrian Schmutzler2021-03-062-2/+0
| | | | | | | | | | | | | | | | So far, board.d files were having execute bit set and contained a shebang. However, they are just sourced in board_detect, with an apparantly unnecessary check for execute permission beforehand. Replace this check by one for existance and make the board.d files "normal" files, as would be expected in /etc anyway. Note: This removes an apparantly unused '#!/bin/sh /etc/rc.common' in target/linux/bcm47xx/base-files/etc/board.d/01_network Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.10 to 5.10.20Rui Salvaterra2021-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Also add a new kconfig symbol (CONFIG_KCMP) to the generic config, disabling the SYS_kcmp syscall (it was split from CONFIG_CHECKPOINT_RESTORE, which is disabled by default, so the previous behaviour is kept). Removed (upstreamed) patches: 070-net-icmp-pass-zeroed-opts-from-icmp-v6-_ndo_send-bef.patch 081-wireguard-device-do-not-generate-ICMP-for-non-IP-pac.patch 082-wireguard-queueing-get-rid-of-per-peer-ring-buffers.patch 083-wireguard-kconfig-use-arm-chacha-even-with-no-neon.patch 830-v5.12-0002-usb-serial-option-update-interface-mapping-for-ZTE-P685M.patch Manually rebased patches: 313-helios4-dts-status-led-alias.patch 104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch Run tested: ath79 (TL-WDR3600) mvebu (Turris Omnia) Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm63xx: rename upstreamed patchSieng Piaw Liew2021-03-052-6/+12
| | | | | | | | | Patch to fix kernel panic was recently accepted upstream so rename patch and add acked lines to reflect that. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> (add the same patch for v5.10) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel-5.4: bump to 5.4.102 and refresh patchesJason A. Donenfeld2021-03-041-1/+1
| | | | | | | | | | | | | | 5.4.102 backported a lot of stuff that our WireGuard backport already did, in addition to other patches we had, so those patches were removed from that part of the series. In the process other patches were refreshed or reworked to account for upstream changes. This commit involved `update_kernel.sh -v -u 5.4`. Cc: John Audia <graysky@archlinux.us> Cc: David Bauer <mail@david-bauer.net> Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* treewide: rename IMAGE_PREFIX/IMAGE_NAME to DEVICE_IMG_*Adrian Schmutzler2021-02-251-1/+1
| | | | | | | | | | | | | | We so far had two variables IMG_PREFIX and IMAGE_PREFIX with different content. Since these names are obviously quite confusing, this patch renames the latter to DEVICE_IMG_PREFIX, as it's a device-dependent variable, while IMG_PREFIX is only (sub)target-dependent. For consistency, also rename IMAGE_NAME to DEVICE_IMG_NAME, as that's a device-dependent variable as well. Cc: Paul Spooren <mail@aparcar.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: pinctrl: fix BCM6348 groupsDaniel González Cabanelas2021-02-235-58/+21
| | | | | | | | | | | | | | | | | | | | The current driver has some troubles: - Some groupings are wrong. - The pinctrl group0 owns pins never used (at least in Openwrt) for any pinmux. The driver hijacks all the pins on the group avoiding any other use, spite they're free. I.e. for buttons, causing this kernel error: [ 4.735928] gpio-keys-polled keys: unable to claim gpio 479, err=-22 [ 4.742642] gpio-keys-polled: probe of keys failed with error -22 - Minor errors about groupings on the documentation - Missing "diag" grouping in dtsi - Wrong groupings in dtsi Fix it by setting the correct groups. And relax the pin capturing, letting the gpios belonging to any group to be used for other purposes like buttons. This was the behavior with stock firmwares and old OpenWrt versions which never caused any trouble. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* bcm63xx: limit name metadata to model nameÁlvaro Fernández Rojas2021-02-221-5/+1
| | | | | | | Since there are only 16 characters available, on most cases the vendor name will fit in the metadata, but the model name won't fit. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: bcm63268: fix GPIO interruptsÁlvaro Fernández Rojas2021-02-221-1/+1
| | | | | | pinctrl should rely on external interrupt controller for GPIO interrupts. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: update ethernet kernel panics fixÁlvaro Fernández Rojas2021-02-1914-68/+108
| | | | | | | Use new patch from Sieng Piaw Liew. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: add kernel 5.10 supportÁlvaro Fernández Rojas2021-02-17140-0/+21633
| | | | | | Runtime-tested on Comtrend AR-5387un. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* target: use SPDX license identifiers on MakefilesAdrian Schmutzler2021-02-104-16/+6
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: kernel: reenable the TRNGDaniel González Cabanelas2021-02-071-53/+2
| | | | | | | | | | | The hardware random number generator driver for bcm63xx was merged with the one used by the Raspberry Pi. Now this driver is lost. Reenable the HW_RANDOM kernel config with the new driver. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> [refresh kernel config] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: sprom: override the PCI device IDDaniel González Cabanelas2021-02-022-1/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI device ID detected by the wifi drivers on devices using a fallback SPROM is wrong. Currently the chipnum is used for this parameter. Most SSB based Broadcom wifi chips are 2.4 and 5GHz capable. But on devices without a physical SPROM, the only one way to detect if the device suports both bands or only the 5GHz band, is by reading the device ID from the fallback SPROM. In some devices, this may lead to a non working wifi on a 5GHz-only card, or in the best case a working 2.4GHz-only in a dual band wifi card. The offset for the deviceid in SSB SPROMs is 0x0008, whereas in BCMA is 0x0060. This is true for any SPROM version. Override the PCI device ID with the one defined at the fallback SPROM, to detect the correct wifi card model and allow using the 5GHz band if supported. The patch has been tested with the following wifi radios: BCM43222: b43: both 2.4/5GHz working brcm-wl: both 2.4/5GHz working BCM43225: b43: 2.4GHz, working brcmsmac: working brcm-wl: it lacks support BCM43217: b43: 2.4GHz, working brcmsmac: it lacks support brcm-wl: it lacks support Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> [amend commit description, rework patch to avoid using a new global variable and keep ssb sprom extraction code as close to ssb/pci.c as possible] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: backport upstream SSB SPROM extractionÁlvaro Fernández Rojas2021-02-026-38/+102
| | | | | | | New upstream changes extract more SPROM values and fix the antenna gain. These changes can be found in linux drivers/ssb/pci.c. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 5.4 to 5.4.93John Audia2021-01-291-1/+1
| | | | | | | | | | | | | | | | | All modification made by update_kernel.sh in a fresh clone without existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 Compile-tested [*]: ath79/{tiny,generic}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64 Run-tested [*]: ath79/generic, ipq40xx, octeon, ramips/mt7621 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
* bcm63xx: fix bcm63xx ethernet kernel panicsÁlvaro Fernández Rojas2021-01-287-17/+52
| | | | | | | | | | | | Calling netdev_reset_queue() from _stop() functions is causing sporadic kernel panics on bcm63xx, which happen mainly on BCM6318 and BCM6328. This reverts to the previous behaviour, which called netdev_reset_queue() from _open() functions. Tested on Comtrend AR-5315u (BCM6318). Fixes: 1d6f422e346b ("bcm63xx: sync ethernet driver with net-next") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* treewide: provide global default for SUPPORTED_DEVICESAdrian Schmutzler2021-01-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The majority of our targets provide a default value for the variable SUPPORTED_DEVICES, which is used in images to check against the compatible on a running device: SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) At the moment, this is implemented in the Device/Default block of the individual targets or even subtargets. However, since we standardized device names and compatible in the recent past, almost all targets are following the same scheme now: device/image name: vendor_model compatible: vendor,model The equal redundant definitions are a symptom of this process. Consequently, this patch moves the definition to image.mk making it a global default. For the few targets not using the scheme above, SUPPORTED_DEVICES will be defined to a different value in Device/Default anyway, overwriting the default. In other words: This change is supposed to be cosmetic. This can be used as a global measure to get the current compatible with: $(firstword $(SUPPORTED_DEVICES)) (Though this is not precisely an achievement of this commit.) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: sync ethernet driver with net-nextSieng Piaw Liew2021-01-2215-191/+703
| | | | | | | | | | | | | | Sync ethernet driver code with upstream Linux kernel: -Reduce xmit_more code changes. -Combine rx cleanup code into a function. -Convert to build_skb. -Improve rx loop by optimizing loop tracking. https://lore.kernel.org/netdev/20210106144208.1935-1-liew.s.piaw@gmail.com/ Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> [Amend commit description, move patches to the top since they are going to be upstreamed] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: nand: fix OOB R/W for non Hamming ECCÁlvaro Fernández Rojas2021-01-222-11/+34
| | | | | | | | Hamming ECC devices do not cover OOB data, as opposed to BCH ECC devices. Therefore, disabling ECC for all devices is preventing BCH devices from correctly reading and writing the OOB data. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: move some disabled symbols to genericAleksander Jan Bajkowski2020-12-222-3/+0
| | | | | | Move some disabled config options found in lantiq target to generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>