aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm53xx
Commit message (Collapse)AuthorAgeFilesLines
* bcm53xx: sysupgrade: fix support for Luxul's legacy firmware formatRafał Miłecki2021-12-131-1/+3
| | | | | | Fixes: c808c55b398c ("bcm53xx: sysupgrade: refactor handling different firmware formats") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3bcf3e8143160e447c22c0ac3fa66fbcf6a59eef)
* bcm53xx: sysupgrade: refactor handling different firmware formatsRafał Miłecki2021-12-131-165/+123
| | | | | | | | | | | | | | | | | | | List of supported formats grew over time and implementation got a bit messy. There are multiple functions with format-specific parameters and commands. Refactor it by making platform_identify() setup all required info right after detecting firmware format. This simplifies formats handling in platform_other_check_image() and platform_do_upgrade() a lot. This has been tested on: 1. SmartRG SR400ac (TRX): non-NAND sysupgrade 2. Netgear R8000 (CHK): NAND aware and standard sysupgrade-s 3. D-Link DIR-885L (Seama): NAND aware and standard sysupgrade-s 4. Luxul XWR-3150 (LXL): NAND aware and standard sysupgrade-s Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 80041dea7094f46f9ef5402964c95b0a5dcd5f28)
* bcm53xx: sysupgrade: simplify extracting image from Seama sealRafał Miłecki2021-12-131-15/+3
| | | | | | | Use "oseama extract" which supports now writing to stdout. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit e7bd6cce4c382e33a62c462bf07bafba23b22e1a)
* bcm53xx: enable Linksys EA6300 & EA9200 buildsRafał Miłecki2021-12-131-3/+0
| | | | | | | | | | | Both should be supported since: 1. Adding NVMEM driver for NVRAM 2. Using NVRAM info for determining active firmware partition Linksys EA9500 uses very similar design and works fine. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 287257d676b1120f388120f1dc259e4eefd3b163)
* bcm53xx: backport the latest upstream DT changesRafał Miłecki2021-12-136-1/+386
| | | | | | | | | This includes: 1. BCM5301X changes from 5.14 and queued 5.15 stuff 2. NSP changes from 5.11 - 5.15 for kernel 5.10 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit bce00f47e5d67e5a33e9d7fa137cbe0a5d3d334b)
* bcm53xx: fix Luxul XWR-3150 LAN ports numberingRafał Miłecki2021-12-131-1/+1
| | | | | | | | Port numbers were reverted. Fixes: c459a6bf482f ("bcm53xx: add support for Luxul FullMAC WiFi devices") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 53546c3e945f5a0a8f8c62311f48c6f21c9ab0a8)
* kernel: bump 5.4 to 5.4.163Hauke Mehrtens2021-12-1210-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch The following patch does not apply to upstream any more and needs some more work to make it work fully again. I am not sure if we are still able to set the UART to a none standard baud rate. target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch These patches needed manually changes: target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All others updated automatically. Compile-tested on: malta/le, armvirt/64, lantiq/xrx200 Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.150Hauke Mehrtens2021-10-022-3/+3
| | | | | | | | | | | | | | | | | | Manually rebased: generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch Removed upstreamed: generic/backport-5.4/040-ARM-8918-2-only-build-return_address-if-needed.patch layerscape/patches-5.4/819-uart-0004-MLK-18137-fsl_lpuart-Fix-loopback-mode.patch All others updated automatically. Compile-tested on: lantiq/xrx200, armvirt/64 Runtime-tested on: lantiq/xrx200, armvirt/64 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.137Hauke Mehrtens2021-07-311-1/+1
| | | | | | | | | | | | Manually rebased generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch All others updated automatically. Compile-tested on: ramips/mt7621, armvirt/32 Runtime-tested on: ramips/mt7621, armvirt/32 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.4 to 5.4.119Hauke Mehrtens2021-05-151-2/+2
| | | | | | | | | | | | | | | | | Removed because in upstream generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch ath79/patches-5.4/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch ramips/patches-5.4/999-fix-pci-init-mt7620.patch Manually rebased ath79/patches-5.4/0033-spi-ath79-drop-pdata-support.patch All others updated automatically. Compile-tested on: x86/64, ath79/generic Runtime-tested on: x86/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: add pending TRX patch for "firmware" partitionRafał Miłecki2021-04-161-0/+43
| | | | | | | | This fixes partitioning on Linksys EA9500. With this change only the currently used firmware MTD partition gets parsed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit a3c7633ddcd4fac9ec8935e5be9249c011bfec14)
* kernel: bump 5.4 to 5.4.111Hauke Mehrtens2021-04-112-2/+2
| | | | | | | | | | | | | | | | | | | | | Refreshed all patches. The following patches were manually changed: * 610-netfilter_match_bypass_default_checks.patch * 611-netfilter_match_bypass_default_table.patch * 802-can-0002-can-rx-offload-fix-long-lines.patch * 802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch * 802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch * 802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch * 802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch * 802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch The can-dev.ko model was moved in the upstream kernel. Compile-tested on: x86/64, armvirt/64, ath79/generic Runtime-tested on: x86/64, armvirt/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: enhance support for Linksys EA9500Vivek Unune2021-04-084-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add leds and configs 2. Add network configs 3. Add script to clear partial boot flag 4. Hack to use port 5 as cpu port as port 8 connected to eth2 wont pass any frames 5. Enable EA9500 image generation Hardware Info: - Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz - Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125 - DDR3 RAM - 256 MB - Flash - 128 MB (Toshiba TC58BVG0S3HTA00) - 2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC - Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4) - 5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC - Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch - Ports - 8 Ports, 1 WAN Ports - Antennas - 8 Antennas - Serial Port - @j6 [GND,TX,RX] (VCC NC) 115200 8n1 Flashing Instructions: 1. Connect a USB-TTL table to J6 on the router as well as a ethernet cable to a lan port and your PC. 2. Power-on the router. 3. Use putty or a serial port program to view the terminal. Hit Ctrl+C and interrupt the CFE terminal terminal. 4. Setup a TFTP server on your local machine at setup you local IP to 192.168.1.2 5. Start the TFTP Server 6. Run following commands at the CFE terminal flash -noheader 192.168.1.2:/openwrt.trx nflash0.trx flash -noheader 192.168.1.2:/openwrt.trx nflash0.trx2 nvram set bootpartition=0 && nvram set partialboots=0 && nvram commit 7. Reboot router to be presented by OpenWrt Note: Only installation method via serial cable is supported at the moment. The trx firmware has to be flashed to both the partitions using following commands from CFE prompt. This will cover US and Non-US variants. Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 209c5918b511d9e406a094ba246a985b640e519f)
* bcm53xx: use upstream Linksys EA9500 fixesRafał Miłecki2021-04-082-1/+30
| | | | | | | One fix was accepted, one was added. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 22369ad7887e98bdb9d1999f221dfcd5fbb2f389)
* bcm53xx: fix Linksys EA9500 partitionsRafał Miłecki2021-04-081-0/+58
| | | | | | | Use proper DT binding. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit f8669c174ee17bbb8d59f901d639f57449dcf751)
* bcm53xx: backport Linksys Panamera (EA9500) patchesVivek Unune2021-04-085-2/+230
| | | | | | | | | | | | | | | | | These patches have been already accepted. 302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch had to be updated. [rmilecki: use actual upstream accepted patches replace v5.10 with v5.11 to match actual upstream kernel recover dropped part of the pinctrl compatible patch update filenames refresh patches] Signed-off-by: Vivek Unune <npcomplete13@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 39ed2265dde1bc8817f9dc6ba053268bb6939ae6)
* kernel: backport 5.13 mtd partitioning changesRafał Miłecki2021-04-081-0/+1
| | | | | | | | | 1. Use upstream accepted NVMEM patches 2. Minor fix for BCM4908 partitioning 3. Support for Linksys firmware partitions on Northstar Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 3fd0a4222b6efbfbdb560c5b13e899ecda627494)
* kernel: bump 5.4 to 5.4.108Hauke Mehrtens2021-03-271-1/+1
| | | | | | | | | Refreshed all patches. Compile-tested on: x86_64, ath79, lantiq Runtime-tested on: x86_64, ath79 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: backport first 5.13 DTS changesRafał Miłecki2021-03-173-1/+476
| | | | | | | | This adds NVMEM bindings that are needed for proper booting on Linksys devices. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 98d456a14e00e24acec36247fb5bd379da90f84e)
* bcm53xx: initialize NVRAM from NVMEM driverRafał Miłecki2021-03-172-0/+92
| | | | | | | | | | | | NVRAM access may be needed early in boot process. Reading it using mtd happens quite late in the init process. Add NVRAM initialization to the NVMEM driver which comes up early and depends on IO mapping only. This is required by Linksys devices which use NVRAM content for proper partitioning (detecting current firmware partition). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit baf04eed028a838518c65be48cbaabe0892343aa)
* bcm53xx: backport NVMEM NVRAM driverRafał Miłecki2021-03-173-0/+181
| | | | | | | | It supports NVRAM access described using DT binding. Right now NVRAM data is exposed using /sys/bus/nvmem/ only. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 01b1b375281b77233d65eb0ebda8e4e3a1bd2407)
* bcm53xx: backport more upstream dts stuff from kernel 5.11Rafał Miłecki2021-03-177-0/+507
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8078d89a5357d13dc3f2e2055fd9d663c4f1bd04)
* bcm53xx: group dts backports by upstream kernel versionRafał Miłecki2021-03-174-1/+6
| | | | | | | It's a simple renaming thing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit d0ee398c36983ccb2ee514e71f10d3c274546f17)
* kernel: bump 5.4 to 5.4.97John Audia2021-02-111-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Manually rebased: bcm27xx 950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch bcm53xx 180-usb-xhci-add-support-for-performing-fake-doorbell.patch layerscape 302-dts-0008-arm64-dts-ls1046a-accumulated-change-to-ls1046a-boar.patch 820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch 820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch Build system: x86_64 Build-tested: bcm27xx/bcm2711, ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions/everything functional. Signed-off-by: John Audia <graysky@archlinux.us> [remove quilt comment, fix/adjust 820-usb-* layerscape patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: use SPDX license identifiers on MakefilesAdrian Schmutzler2021-02-104-15/+6
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm53xx: use default SUPPORTED_DEVICES for Meraki MR32Adrian Schmutzler2021-01-231-3/+1
| | | | | | | | Since the new global SUPPORTED_DEVICES are now available in bcm53xx as well, we do not need to specify an explicit value for the MR32 anymore. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: drop empty kmod-ledtrig-* packagesSungbo Eo2021-01-151-1/+1
| | | | | | | | | | | | | | The following four led triggers are enabled in generic config. * kmod-ledtrig-default-on * kmod-ledtrig-heartbeat * kmod-ledtrig-netdev * kmod-ledtrig-timer Drop the packages and remove them from DEVICE_PACKAGES. There's no other package depending on them in this repo. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: bump 5.4 to 5.4.86Adrian Schmutzler2021-01-011-1/+1
| | | | | | | | | | | | | | | | | Removed upstreamed patches: pending-5.4/499-mtd-parser-cmdline-Fix-parsing-of-part-names-with-co.patch Manually merged: pending-5.4/611-netfilter_match_bypass_default_table.patch layerscape/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/{generic,tiny}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64 Run-tested: ipq806x/R7800, realtek Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org>
* kernel: move some disabled symbols to genericAleksander Jan Bajkowski2020-12-221-2/+0
| | | | | | Move some disabled config options found in lantiq target to generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* bcm53xx: use correct case for TP-Link in DEVICE_VENDORMoritz Warning2020-12-191-2/+2
| | | | | | | | Adjust spelling of vendor names to what is used in other places. Signed-off-by: Moritz Warning <moritzwarning@web.de> [improve commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm53xx: MR32: fix DEVICE_VENODR typoChristian Lamparter2020-12-131-1/+1
| | | | | | DEVICE_VENDOR was misspelled as DEVICE_VENODR. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.4 to 5.4.75John Audia2020-11-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased patches: bcm27xx: patches-5.4/950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch bcm53xx: patches-5.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch layerscape: patches-5.4/802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch patches-5.4/808-i2c-0002-MLK-10893-i2c-imx-add-irqf_no_suspend.patch patches-5.4/820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch Removed since could be reverse-applied by quilt: mediatek: patches-5.4/0700-arm-dts-mt7623-add-missing-pause-for-switchport.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86_64 Run-tested: ipq806x/R7800, x86_64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64] Rebase of 802-can-0025-can-flexcan-add-LPSR-mode-support-for-i.MX7D.patch Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* kernel: remove support for kernel 4.19Adrian Schmutzler2020-10-3025-2348/+0
| | | | | | | We use 5.4 on all targets by default, and 4.19 has never been released in a stable version. There is no reason to keep it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: move kmod-i2c-bcm-iproc to I2C menuDaniel Golle2020-10-301-1/+1
| | | | | | | | A typo resulted in that module having it's own menu. Move it into the I2C menu as it was most likely intended. Fixes: 1291274335 ("kernel: package bcm53xx i2c module") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.4 to 5.4.69John Audia2020-10-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | Seemingly unneeded based on new upstream code so manually deleted: layerscape: 820-usb-0007-usb-dwc3-gadget-increase-timeout-value-for-send-ep-c.patch Manually merged: generic-hack: 251-sound_kconfig.patch All other modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [add lantiq test report, minor commit message clarification] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm53xx: add Cisco Meraki MR32Christian Lamparter2020-09-257-3/+380
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Cisco Meraki MR32. The unit was donated by Chris Blake. Thank you! WARNING: Only the 1x1:1 abgn Air Marshal WIPS wifi is currently supported by b43: b43-phy2: Found PHY: Analog 9, Type 4 (N), Revision 16 b43-phy2: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1 b43-phy2: Loading firmware version 784.2 (2012-08-15 21:35:19) and only as 802.11ABG! while WIFI1 and WIFI2 (both BCM4352) are not: b43-phy0: Broadcom 4352 WLAN found (core revision 42) b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1) Hardware Highlights: SoC: Broadcom BCM53016A1 (1 GHz, 2 cores) RAM: 128 MiB NAND: 128 MiB Spansion S34ML01G2 (~114 MiB useable) ETH: 1GBit Ethernet Port - PoE WIFI1: Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352) WIFI2: Broadcom BCM43520 bgn (2x2:2 - id: 0x4352) WIFI3: Broadcom BCM43428 abgn (1x1:1 - id: 43428) BLE: Broadcom BCM20732 (ttyS1) LEDS: 1 x Programmable RGB Status LED (driven by a PWM) 1 x White LED (GPIO) 1 x Orange LED Fault Indicator (GPIO) 2 x LAN Activity / Speed LEDs (On the RJ45 Port) BUTTON: one Reset button MISC: AT24C64 8KiB EEPROM (i2c - stores Ethernet MAC + Serial#!) ina219 hardware monitor (i2c) Kensington Lock SERIAL: WARNING: The serial port needs a TTL/RS-232 3V3 level converter! The Serial setting is 115200-8-N-1. The board has a populated right angle 1x4 0.1" pinheader. The pinout is: VCC, RX, TX, GND. (Use a multimeter) Flashing needs a serial adaptor (due to the lack of a working dropbear on the original firmware). This flashing procedure for the MR32 was tested with firmware: "r23-149867:150252-aacharya". 0. Create a seperate Ethernet LAN which does not have access to the internet. Ideally use 192.168.1.2 for your PC. Make sure to reserve 192.168.1.1 it will be used later on by the OpenWrt firmware. The original Meraki firmware will likely try to setup the network via DHCP Discovery, so make sure your PC is running a DHCP-Server (i.e.: dnsmasq) '# dnsmasq -i eth# -F 192.168.1.5,192.168.1.50 Furthermore, the PC needs a supported ssh/http/ftp server in order to retrieve the initramfs + dtb file 1. Disassemble the MR32 device by removing all screws (4 screws are located under the 4 rubber feets!) and prying open the plastic covers without breaking the plastic retention clips. Once inside, remove all the screws on the outer metal shielding to get to the PCB. It's not necessary to remove the antennas! 2. Connect the serial cable to the serial header. 3. Partially reassemble the outer metal shielding to ensure that the SoC has a proper heat sink. 4. Connect the Ethernet patch cable to the device and the power cable. 5. Wait for the device to boot and enter the root shell. (rooting is not discussed in detail here please refer to Chris Blake - "pwning the meraki mr18" blog post: <https://servernetworktech.com/2016/02/pwning-the-meraki-mr18/> (The same method works with the MR32's r23-149867:150252-aacharya) Wait for the MR32 to enter the "<Meraki>" prompt and enter: <Meraki> odm serial_num read (Verify that it matches what's on the S/N Sticker on the back!) <Meraki> odm serial_num write Q2XX-XXXX-XXXV <Meraki> odm serial_num read (Verify that the S/N has changed - and the LED start to flash) now to flash the firmware: <Meraki> odm firmware part.safe "http://192.168.1.2/mr32-initramfs.bin" Once OpenWrt booted use sysupgrade to permanently install OpenWrt. To do this: Download the latest sysupgrade.bin file for the MR32 to the device and use sysupgrade *sysupgrade.bin to install it. WARNING: DO NOT DELETE the "storage" ubi volume! To flash later MR32 Firmwares like r25-201804051805-G885d6d78-dhow-rel requires in-circut-i2c tools to access the I2C EEPROM AT24C64 next to the SoC. The idea is pretty much the same as from Step 5 from above: Change the serial number to Q2XXXXXXXXXV (should be around 0x7c), then attach a serial cable, ethernet (but make sure the device can't reach the internet!) hit "s" (the small s!) during boot to enter the root-shell and add the following commands to the /storage/config there: serial_allow_odm true serial_access_enabled true serial_access_check false valid_config true and then hit exit to let it finish booting. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: package bcm53xx i2c moduleChristian Lamparter2020-09-251-0/+15
| | | | | | | | The BCM5301x SoCs do have i2c. Since this is only being used by the Meraki MR32, this will be packaged as a module. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* bcm53xx: backport uart2 and pcie2 device-nodesChristian Lamparter2020-09-253-1/+57
| | | | | | | | | | These have made their way into -next. This patch also includes the portion of the bcm53xx kernel patch refreshes as the hunks in 302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch moved slightly due to the added nodes. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* bcm53xx: enable PWM for bcm53xxChristian Lamparter2020-09-253-1/+52
| | | | | | | | | The Meraki MR32 (BCM53016A1) uses the pwm to drive the tricolor LED. The driver has been available in upstream for a long time. Only the Device-Tree definition was missing, but it has been queued recently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* treewide: use wpad-basic-wolfssl as defaultPetr Štetiar2020-08-201-1/+1
| | | | | | | | | | | | | | | In order to support SAE/WPA3-Personal in default images. Replace almost all occurencies of wpad-basic and wpad-mini with wpad-basic-wolfssl for consistency. Keep out ar71xx from the list as it won't be in the next release and would only make backports harder. Build-tested (build-bot settings): ath79: generic, ramips: mt7620/mt76x8/rt305x, lantiq: xrx200/xway, sunxi: a53 Signed-off-by: Petr Štetiar <ynezz@true.cz> [rebase, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.58John Audia2020-08-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR is a blend of several kernel bumps authored by ldir taken from his staging tree w/ some further adjustments made by me and update_kernel.sh Summary: Deleted upstreamed patches: generic: 742-v5.5-net-sfp-add-support-for-module-quirks.patch 743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch bcm63xx: 022-v5.8-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch 024-v5.8-mtd-rawnand-brcmnand-fix-CS0-layout.patch mediatek: 0402-net-ethernet-mtk_eth_soc-Always-call-mtk_gmac0_rgmii.patch Deleted patches applied differently upstream: generic: 641-sch_cake-fix-IP-protocol-handling-in-the-presence-of.patch Manually merged patches: generic: 395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch bcm27xx: 950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch layerscape: 701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch Build system: x86_64 Build-tested: ath79/generic, bcm27xx/bcm2708, bcm27xx/bcm2711, imx6, mvebu/cortexa9, sunxi/a53 Run-tested: Netgear R7800 (ipq806x) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-By: Lucian Cristian <Lucian.cristian@gmail.com> [mvebu] Tested-By: Curtis Deptuck <curtdept@me.com> [x86/64] [do not remove 395-v5.8-net-sch_cake-Take-advantage-... patch, adjust and refresh patches, adjust commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-By: John Audia <graysky@archlinux.us> [ipq806x]
* Revert "bcm53xx: remove useless echo in 02_network"Adrian Schmutzler2020-08-181-2/+3
| | | | | | | | | | | | This reverts commit b1f6a5d9dffd8da30800e9e66ea772554bbba778. In this particular case, the echo command was _not_ useless, but converted the newlines back to spaces. Add a comment into the code to make that obvious for the next one looking at it like me. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm53xx: remove useless echo in 02_networkAdrian Schmutzler2020-08-171-2/+2
| | | | | | | The output is already produced in the inner $() brackets, no need to catch and echo it again. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: add CGROUPS and IOSCHED_BFQ back to configAdrian Schmutzler2020-08-121-1/+0
| | | | | | | | | | | | After those symbols have been removed from generic kernel config, they were added to the target config during every kernel config refresh. As that's not desirable, add them back to the generic config. Fixes: d1a8217d87bf ("kernel: clean-up build-configurable kernel config symbols") Fixes: cfe235c43686 ("kernel: modules: add package kmod-iosched-bfq") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm53xx: use vendor_model scheme for device/image namesAdrian Schmutzler2020-08-121-57/+57
| | | | | | | | | | | Most targets have been updated to consistently use the vendor_model scheme for device definitions and thus, image names. Apply this to bcm53xx as well. This does _not_ apply any other specific naming changes. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: unify CONFIG_GPIO_SYSFS in kernel configsFelix Fietkau2020-08-062-2/+0
| | | | | | Enable it for all platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* bcm53xx: switch to kernel 5.4Rafał Miłecki2020-08-041-1/+1
| | | | | | Switch, USB, WiFi, buttons tested on BCM47094. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: set HW_RANDOM_BCM2835=yRafał Miłecki2020-08-041-0/+2
| | | | | | | | | | This enables Random Number Generator support on Northstar (described in DT with brcm,bcm5301x-rng). It's also a workaround for OpenWrt bug with kernel config causing: Broadcom BCM2835/BCM63xx Random Number Generator support (HW_RANDOM_BCM2835) [Y/n/m/?] (NEW) Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: update kernel 5.4 DTS to upstream 5.9 stateRafał Miłecki2020-08-043-0/+333
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: update kernel 5.4 configRafał Miłecki2020-08-041-100/+4
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 10:55:37 +0000