aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.15 to 5.15.50Rui Salvaterra2022-07-034-8/+8
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm27xx: add support for Raspberry Pi Zero 2Stijn Tintel2022-07-013-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to licensing uncertainty, we do not include the firmwares for the wireless chips used in the Raspberry Pi Zero 2 W. To have working wireless, follow the instructions below. For people building their own images: mkdir -p files/lib/firmware/brcm wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.bin wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.txt wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.bin wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.txt Now build the OpenWrt image as usual, and it will include the firmware files in the correct location. For people using ext4 images: Write the ext4 image to the sdcard, then mount the 2nd partition and put the firmware files from the links above in /lib/firmware/brcm relative from the mount point where the partition is mounted. For people using squashfs images: Write the squashfs image to the sdcard, place it in the Raspberry Pi Zero 2 W, boot it and wait for the overlay filesystem to be created. Find the offset of the overlay filesystem in sysfs: # cat /sys/devices/virtual/block/loop0/loop/offset 25755648 Shut down the device, unplug the power and move the SD card to a Linux computer. Mount the 2nd partition of the sdcard as a loop device with the offset found earlier. sudo mount /dev/sdh2 -o loop,offset=25755648 /mnt/temp Put the firmware files from the links above in /upper/lib/firmware/brcm relative to the mount point where the loop device is mounted. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Peter van Dijk <peter@7bits.nl>
* kernel: bump 5.15 to 5.15.47Rui Salvaterra2022-06-273-6/+6
| | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/702-v5.19-32-net-ethernet-mtk_eth_soc-out-of-bounds-read-in-mtk_h.patch [01] [01] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.47&id=b24ca1cf846273361d5bd73a35de95a486a54b6d Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [Removed 702-v5.19-32-net-ethernet-mtk_eth_soc-out-of-bounds-read-in-mtk_h.patch] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.15 to 5.15.46Rui Salvaterra2022-06-2738-405/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/400-mtdblock-warn-if-opened-on-NAND.patch [01] generic/backport-5.15/420-v5.19-01-mtd-spinand-gigadevice-fix-Quad-IO-for-GD5F1GQ5UExxG.patch [02] bcm27xx/patches-5.15/950-0029-Revert-mailbox-avoid-timer-start-from-callback.patch [03] bcm27xx/patches-5.15/950-0417-bcm2711_thermal-Don-t-clamp-temperature-at-zero.patch [04] bcm27xx/patches-5.15/950-0740-drm-vc4-hvs-Fix-frame-count-register-readout.patch [05] bcm27xx/patches-5.15/950-0755-drm-vc4-hvs-Reset-muxes-at-probe-time.patch [06] bcm27xx/patches-5.15/950-0759-drm-vc4-txp-Don-t-set-TXP_VSTART_AT_EOF.patch [07] bcm27xx/patches-5.15/950-0760-drm-vc4-txp-Force-alpha-to-be-0xff-if-it-s-disabled.patch [08] bcm53xx/patches-5.15/031-v5.17-0005-ARM-dts-BCM5301X-update-CRU-block-description.patch [09] mediatek/patches-5.15/102-mt7629-enable-arch-timer.patch [10] Manually rebased: bcm27xx/patches-5.15/950-0741-drm-vc4-hvs-Use-pointer-to-HVS-in-HVS_READ-and-HVS_W.patch [01] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=f41c9418c5898c01634675150696da290fb86796 [02] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=d5b66645305c6f3a1b2cf75cee4157b07f293309 [03] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=119f99209d8531359bcb935f252ec435f9d21b13 [04] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=c4e1280abead1552e1764684079a43e222ccd163 [05] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=08465a1889cb48ec64431e9db745b5be15399251 [06] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=0e26a6da02e63b75b629573d13966c36aa6264f0 [07] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=01c9020b2e7c85e394879f34851805179ac3d1d8 [08] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=d47f85cc0171a5d3c5bd8cbb8a98983ca3357cbd [09] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=5151f24ac937ff7eb1f078257c66e3c0f0296010 [10] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=ffea838686b82fbb2801cdfad6ba5309d15c032d Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-244-0/+8
| | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.15 to 5.15.45Rui Salvaterra2022-06-062-2/+2
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.44Rui Salvaterra2022-06-063-3/+3
| | | | | | | | Delete the crypto-lib-blake2s kmod package, as BLAKE2s is now built-in. Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.42Rui Salvaterra2022-06-062-3/+3
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/610-v5.18-netfilter-flowtable-move-dst_check-to-packet-path.patch [1] generic/pending-5.15/704-00-netfilter-flowtable-fix-excessive-hw-offload-attempt.patch [2] generic/pending-5.15/704-01-netfilter-nft_flow_offload-skip-dst-neigh-lookup-for.patch [3] generic/pending-5.15/704-02-net-fix-dev_fill_forward_path-with-pppoe-bridge.patch [4] generic/pending-5.15/704-03-netfilter-nft_flow_offload-fix-offload-with-pppoe-vl.patch [5] Manually rebased: generic/hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=88b937673b3552d54da20f648e61a123f4c1fa67 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=5f4197a020c049a59ea7907c31f9ab037dcefefe [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=7613dcaceee281973145588f4244f2f78ef85b7f [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=f96b2e06721249ebf8da3254cfef29dcb6583948 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=b329889974aed47e1167c85653c07097013e01a7 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.15 to 5.15.41Rui Salvaterra2022-06-0650-231/+231
| | | | | | | | | | | Deleted (upstreamed): generic/backport-5.15/890-v5.19-net-sfp-Add-tx-fault-workaround-for-Huawei-MA5671A-SFP-ON.patch [1] Other patches automatically rebased. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.41&id=99858114a3b2c8f5f8707d9bbd46c50f547c87c0 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm27xx/bcm2711: enable asm crypto algorithmsEneas U de Queiroz2022-06-041-0/+8
| | | | | | | | This enables arm64/neon version of AES, SHA256 and SHA512 algorithms in the kernel. bcm2711 does not support armv8 crypto extensions, so they are not included. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* bcm27xx/bcm2710: enable asm crypto algorithmsEneas U de Queiroz2022-06-041-0/+8
| | | | | | | | This enables arm64/neon version of AES, SHA256 and SHA512 algorithms in the kernel. bcm2710 does not support armv8 crypto extensions, so they are not included. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* bcm27xx: add pwm-fan dependency to RPi PoEÁlvaro Fernández Rojas2022-05-221-1/+1
| | | | | | This is needed for the fan in the PoE hat to work. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: sound-soc-rpi-cirrus: fix packageÁlvaro Fernández Rojas2022-05-201-2/+4
| | | | | | Fix kmod-sound-soc-rpi-cirrus package dependencies. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: modules: video: fix whitespaceÁlvaro Fernández Rojas2022-05-201-1/+1
| | | | | | No idea how this ended up here v2... Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: enable PWM drivers in configÁlvaro Fernández Rojas2022-05-205-18/+18
| | | | | | Removes PWM module package. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: base-files: align network filesÁlvaro Fernández Rojas2022-05-192-4/+6
| | | | | | | | - Use the same order for /etc/board.d/02_network and /lib/preinit/05_set_preinit_iface_brcm2708. - Add missing RPi 400 and CM4 to /lib/preinit/05_set_preinit_iface_brcm2708. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: diag.sh: fix whitespaceÁlvaro Fernández Rojas2022-05-191-1/+1
| | | | | | No idea how this ended up here... Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* config: limit CONFIG_DEBUG_INFO to top-level generic configsTony Ambardar2022-05-184-4/+0
| | | | | | | | | | Remove redundant target-level entries, noting that these settings will be configured from "Kernel build options" of Kconfig. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove from new configs introduced after patch submission] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm27xx: add CPU_FREQ_GOV_SCHEDUTILJohn Audia2022-05-173-0/+7
| | | | | | | | | This is enabled upstream for bcm2709, bcm2710 and bcm2711. https://github.com/raspberrypi/linux/blob/dff79e31c3b05a50f725442c1fc19a6194491523/arch/arm/configs/bcm2709_defconfig#L51 https://github.com/raspberrypi/linux/blob/dff79e31c3b05a50f725442c1fc19a6194491523/arch/arm/configs/bcm2711_defconfig#L51 Signed-off-by: John Audia <graysky@archlinux.us> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: remove linux 5.10 configsÁlvaro Fernández Rojas2022-05-174-1721/+0
| | | | | | Sorry, I missed these when removing linux v5.10 support... Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: remove linux 5.10 compatibilityÁlvaro Fernández Rojas2022-05-17718-220355/+2
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: switch to 5.15Álvaro Fernández Rojas2022-05-171-2/+1
| | | | | | | I tested it locally and I couldn't find any regressions, so let's give this a wider test :). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: add support for linux v5.15Álvaro Fernández Rojas2022-05-17923-1/+265724
| | | | | | | | | Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: bump 5.10 to 5.10.114John Audia2022-05-166-11/+11
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.113John Audia2022-04-302-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.112John Audia2022-04-234-6/+6
| | | | | | | | | | | | | Manually rebased: ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.111John Audia2022-04-166-19/+19
| | | | | | | | | | | | | | Removed upstreamed: pending-5.10/850-0003-PCI-aardvark-Fix-support-for-MSI-interrupts.patch apm821xx/patches-5.10/150-ata-sata_dwc_460ex-Fix-crash-due-to-OOB-write.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.110John Audia2022-04-0914-25/+25
| | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Compile-/run-tested: ath79/generic (Archer C7 v2). Signed-off-by: John Audia <graysky@archlinux.us>
* bcm27xx: include 'rtc' in target's 'FEATURES'Piotr Dymacz2022-04-071-1/+1
| | | | | | | | | There are many ways to add external RTC to Raspberry Pi boards. Let's include support for this for the whole target and while at it, sort features alphabetically. Fixes: #9594 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel: bump 5.10 to 5.10.109John Audia2022-03-302-7/+7
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.108Rui Salvaterra2022-03-266-12/+12
| | | | | | | | | | | | | | | | Patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Tested-by: John Audia <graysky@archlinux.us> Build-tested: ath79/generic, ramips/mt76{20,21,x8}, ipq40xx, mvebu, realtek/rtl{838,930}x, x86/64 Run-tested: ramips/mt7621, mvebu Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: move rtl8152 patches to genericAleksander Jan Bajkowski2022-03-2516-5062/+0
| | | | | | | | | | | | | This commit moves the patches for the r8152.c driver to the generic directory. Previously they were only available on the bcm27xx target. With these patches the Realtek RTL8153C, RTL8153D, RTL8156A and RTL8156B chips are supported on all targets by the kmod-usb-net-rtl8152 module. The RTL8156A and RTL8156B are the 2.5Gb/s Ethernet adapters. The patches have been tested on TP-Link UE300 (RTL8153A) and UNITEK 1313B (RTL8156B). Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* kernel: bump 5.10 to 5.10.106John Audia2022-03-1910-15/+15
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.105John Audia2022-03-191-2/+2
| | | | | | | | | | | | | | | Updated default config with new sym (CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y). Manually rebased: generic/hack-5.10/220-arm-gc_sections.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* bcm27xx: bcm2711: add kmod-usb-net-lan78xxJosef Schlehofer2022-03-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some vendors like Seeedstudio in their product [1] with Raspberry Pi Compute Module 4 uses Microchip LAN7800 (USB 3.0 to Gigabit Ethernet Bridge) - USB 3.0 extended from PCIe of CM4. lsusb output: ``` Bus 002 Device 002: ID 0424:7800 Microchip LAN7800 ``` Raspberry Pi 4 and even Compute Module 4 has many resources available and for just one kernel module it is not necessary to add additional specific CM4 profiles. Let's include it by default, so the both Ethernet ports will be usable to have better user-experience. Because previous generation of Raspberry Pi included LAN7800 Gigabit Ethernet by default and it is enabled there [2] in kernel without additional kernel module, which was added recently [3]. After this commit in dmesg can be found this: ``` root@OpenWrt:~# dmesg | grep lan [ 7.038889] lan78xx 2-3:1.0 (unnamed net_device) (uninitialized): int urb period 64 [ 7.090484] usbcore: registered new interface driver lan78xx ``` Tested and works with sysupgrade image. [1] https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html [2] https://github.com/openwrt/openwrt/blob/32c74552b2310531af593ee0f859a3935a3a7cbd/target/linux/bcm27xx/bcm2709/config-5.4#L437 [3] https://github.com/openwrt/openwrt/commit/31647d8be8c60bfb6690c87c739b8abe6dc03950 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: bump 5.10 to 5.10.104John Audia2022-03-132-9/+9
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.103Rui Salvaterra2022-03-052-4/+4
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.102John Audia2022-03-012-2/+2
| | | | | | | | | | | | | | | Removed upstreamed: bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.102&id=f333c1916fd6b55900029bf8f918cc00009e2111 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.101John Audia2022-03-0122-81/+39
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* bcm27xx: bcm2710: update defconfigJohn Audia2022-02-281-2/+0
| | | | | | | | | | | | Ran `make kernel_menuconfig CONFIG_TARGET=bcm2710` having used the snapshot config for bcm2710[1]. Manually added back two symbols that the make target removed, namely: * # CONFIG_SND_SOC_AD193X_I2C is not set * # CONFIG_SND_SOC_AD193X_SPI is not set 1. https://downloads.openwrt.org/snapshots/targets/bcm27xx/bcm2710/config.buildinfo Signed-off-by: John Audia <graysky@archlinux.us>
* bcm27xx: bcm2711: update defconfigJohn Audia2022-02-281-2/+0
| | | | | | | | | | | | | | | | | | Ran `make kernel_menuconfig CONFIG_TARGET=bcm2711` having used the snapshot config for bcm2711[1]. Manually added back two symbols that the make target removed, namely: * # CONFIG_SND_SOC_AD193X_I2C is not set * # CONFIG_SND_SOC_AD193X_SPI is not set Without adding these back, the build fails due to unsatisfied deps[2]. Build system: x86_64 Build-tested: bcm2711/multidevices 1. https://downloads.openwrt.org/snapshots/targets/bcm27xx/bcm2711/config.buildinfo 2. https://github.com/openwrt/openwrt/commit/a478202d74b66c3da17d57442649eb4f131fc7b2#commitcomment-67096592 Signed-off-by: John Audia <graysky@archlinux.us>
* Revert "bcm27xx: bcm27xx: update defconfig"Christian Lamparter2022-02-244-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts all four commits dbb45421bab "bcm27xx: bcm2708: update defconfig" 332f69583ad "bcm27xx: bcm2709: update defconfig" a478202d74b "bcm27xx: bcm2710: update defconfig" 82da1dfd69a "bcm27xx: bcm2711: update defconfig" this also highlighted an unrelated kconfig failure that warrants investigation. But for now it is important for the bcm27xx target to come back again. |* |* Restart config... |* |* |* Allow override default queue discipline |* |Allow override default queue discipline (NET_SCH_DEFAULT) [Y/n/?] y | Default queuing discipline | 1. Fair Queue (DEFAULT_FQ) (NEW) | 2. Controlled Delay (DEFAULT_CODEL) (NEW) | > 3. Fair Queue Controlled Delay (DEFAULT_FQ_CODEL) | 4. Stochastic Fair Queue (DEFAULT_SFQ) (NEW) | 5. Priority FIFO Fast (DEFAULT_PFIFO_FAST) | choice[1-5?]: |Error in reading or end of file. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* bcm27xx: bcm2711: update defconfigJohn Audia2022-02-201-5/+0
| | | | | | | | | | Enabled CONFIG_ALL_KMODS and ran make kernel_menuconfig against bcm2711 to update defconfig. Some of the removed symbols are present in target/linux/generic/config-5.10 while others were removed by the make target. Signed-off-by: John Audia <graysky@archlinux.us> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (wrapped)
* bcm27xx: bcm2710: update defconfigJohn Audia2022-02-201-5/+0
| | | | | | | | | | Enabled CONFIG_ALL_KMODS and ran make kernel_menuconfig against bcm2710 to update defconfig. Some of the removed symbols are present in target/linux/generic/config-5.10 while others were removed by the make target. Signed-off-by: John Audia <graysky@archlinux.us> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (wrapped)
* bcm27xx: bcm2709: update defconfigJohn Audia2022-02-201-3/+0
| | | | | | | | | | Enabled CONFIG_ALL_KMODS and ran make kernel_menuconfig against bcm2709 to update defconfig. Some of the removed symbols are present in target/linux/generic/config-5.10 while others were removed by the make target. Signed-off-by: John Audia <graysky@archlinux.us> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (wrapped)
* bcm27xx: bcm2708: update defconfigJohn Audia2022-02-201-3/+0
| | | | | | | | | | Enabled CONFIG_ALL_KMODS and ran make kernel_menuconfig against bcm2708 to update defconfig. Some of the removed symbols are present in target/linux/generic/config-5.10 while others were removed by the make target. Signed-off-by: John Audia <graysky@archlinux.us> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (wrapped)
* kernel: bump 5.10 to 5.10.99John Audia2022-02-112-3/+3
| | | | | | | | | | | | | | | | | | | | Had to update generic defconfig (make kernel_menuconfig CONFIG_TARGET=generic) for this bump, but since that only modifies the target defined in .config, and since that target also needed to be updated for unrelated reasons, manually propagated the newly added symbol to the generic config. Removed upstreamed: pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch[1] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.99&id=080f371d984e8039c66db87f3c54804b0d172329 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.98John Audia2022-02-1115-59/+45
| | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* bcm27xx: update distroconfig.txt for faster RPi4John Audia2022-02-051-0/+2
| | | | | | | | | | | | | Newer RPi 4 Rev 6 (8 GB models and recent 2 GB / 4 GB models) ship with the so-called C0 processor which can run turbo mode at 1.8 GHz max rather than 1.5 GHz gracefully. Add 'arm_boost=1' to pi4 section of to enable. Note that this setting has no effect on older chips; they continue with their 1.5 GHz max unless users overclock them. Ref: https://www.raspberrypi.com/news/bullseye-bonus-1-8ghz-raspberry-pi-4 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.96Rui Salvaterra2022-02-012-2/+2
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-08 04:56:41 +0000