openwrt/upstream - upstream openwrt

	Commit message (Collapse)	Author	Age	Files	Lines
*	ath79: harmonize appearance of ethX nodes in qca953x DTSes	Adrian Schmutzler	2020-08-12	1	-2/+1
\| \| \| \| \| \| \| \| \| \| \|	This harmonizes the appearance of ethX nodes in qca953x DTSes by: - having the same order of nodes and properties - removing redundant status property on eth1 (set in qca953x.dtsi) This is meant to help both copy-pasters and reviewers, since deviations and errors can be spotted easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
*	ath79: add support for 8devices Lima board	Andrey Bondar	2020-07-08	1	-0/+116
	Specification: • 650/600/216 MHz (CPU/DDR/AHB) • 64 MB of RAM (DDR2) • 32 MB of FLASH • 2T2R 2.4 GHz • 2x 10/100 Mbps Ethernet • 1x USB 2.0 Host socket • 1x miniPCIe slot • UART for serial console • 14x GPIO Flash instructions: Upgrading from ar71xx target: • Upload image into the board: scp openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin root@192.168.1.1/tmp/ • Run sysupgrade sysupgrade -F /tmp/openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin Upgrading from u-boot: • Set up tftp server with openwrt-ath79-generic-8dev_lima-initramfs-kernel.bin • Go to u-boot (reboot and press ESC when prompted) • Set TFTP server IP setenv serverip 192.168.1.254 • Set device ip from the same subnet setenv ipaddr 192.168.1.1 • Copy new firmware to board tftpboot 0x82000000 initramfs.bin • Boot OpenWRT bootm 0x82000000 • Upload image openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin into the board • Run sysupgrade. Signed-off-by: Andrey Bondar <a.bondar@8devices.com>