openwrt/upstream - upstream openwrt

	Commit message (Collapse)	Author	Age	Files	Lines
*	apm821xx, ath79, ipq40xx, ipq806x, lantiq, ramips: base-files: Use generic ↵	Petr Štetiar	2018-12-06	1	-45/+0
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	diag.sh I wanted to add status LEDs support to my imx6 based board and have found out, that I could use diag.sh script found in ramips platform, which seems to be also shared in a few other platforms: 4801276bc2078c5bcf03003c831e3b0a target/linux/ramips/base-files/etc/diag.sh 4801276bc2078c5bcf03003c831e3b0a target/linux/ipq40xx/base-files/etc/diag.sh 4801276bc2078c5bcf03003c831e3b0a target/linux/ath79/base-files/etc/diag.sh And @chunkeey suggested to me, that I can also add lantiq, ipq806x and apm821xx to the list of platforms which could share this generic diag.sh. I've extended the base diag.sh in a way, that if it detects any of the DTS LED aliases, then it would use the generic DTS set_led_state code. The code in platform's diag.sh has moved to base-files package in this commit: base-files: diag.sh: Make it more generic towards DTS so it could be reused Signed-off-by: Petr Štetiar <ynezz@true.cz> Tested-by: Christian Lamparter <chunkeey@gmail.com> (apm821xx and ipq40xx)
*	treewide: drop unused get_status_led functions	Mathias Kresin	2018-08-16	1	-4/+0
\| \| \| \| \| \| \|	The function isn't used for targets getting the status leds from the devicetree. Signed-off-by: Mathias Kresin <dev@kresin.me>
*	treewide: fix upgrade led handling	Mathias Kresin	2018-08-16	1	-2/+4
\| \| \| \| \| \| \| \| \| \| \| \|	The upgrade led is only used if a running led is defined. If no running led is defined, the upgrade led is ignored and upgrade isn't indicated at all. Instead, turn off the running led prior to turning the upgrade led on. In most cases there isn't any visual change, but it allows to use an independent led for upgrade indication. Signed-off-by: Mathias Kresin <dev@kresin.me>
*	ath79: add support for indicating the boot state using multiple leds	Dmitry Tunin	2018-08-15	1	-2/+27
\| \| \| \| \| \| \| \| \| \| \|	Use diag.sh version used for apm821xx, ipq40xx and ipq806x, which supports different leds for the different boot states. The existing led sequences should be the same as before. Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> [reword commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
*	ath79: clean up led config script files for all devices	Johann Neuhauser	2018-06-16	1	-25/+0
\| \| \| \| \| \| \| \| \|	1. Move all status led definitions out of diag.sh into device dt as we use here a generic script hook. 2. Encode "phy0ptp" led trigger in dt of device for all ath79 devices. Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
*	ath79: add WLAN, Ethernet-Switch with LAN/WAN and Status LED to Dorin	Catrinel Catrinescu	2018-06-07	1	-0/+3
\| \| \| \|	Signed-off-by: Catrinel Catrinescu <cc@80211.de>
*	ath79: preliminary support for TP-Link WDR3600 / WDR4300 (AR9344)	Johann Neuhauser	2018-05-22	1	-1/+3
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	working: - leds - buttons - lan / wan - usb (hub port 1 + 2) - wifi 5g - sysupgrade - ... not working: - wifi 2g Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
*	ath79: add AVM FRITZ!WLAN Repeater 300E	Mathias Kresin	2018-05-17	1	-0/+4
\| \| \| \| \| \|	No known issues, everything works fine. Signed-off-by: Mathias Kresin <dev@kresin.me>
*	ath79: add new OF only target for QCA MIPS silicon	John Crispin	2018-05-07	1	-0/+38
	This target aims to replace ar71xx mid-term. The big part that is still missing is making the MMIO/AHB wifi work using OF. NAND and mikrotik subtargets will follow. Signed-off-by: John Crispin <john@phrozen.org>