aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath25
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.15 to 5.15.118John Audia2023-06-251-1/+1
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 1f5fce27c195373fedcf233a48470de97752058f)
* kernel: remove obsolete kernel version switchesAleksander Jan Bajkowski2023-05-201-8/+0
| | | | | | | This removes unneeded kernel version switches from the targets after kernel 5.10 has been dropped. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* ath25: Replace fall through comment with fallthrough;Hauke Mehrtens2023-05-191-3/+3
| | | | | | | | Replace the fall through comment with fallthrough; in the ar2315 flash driver. This fixes a compile warning. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath25: Remove virt_to_phys() from Ethernet driverHauke Mehrtens2023-05-192-10/+8
| | | | | | | | Instead of defining an own virt_to_phys() use the version from the generic MIPS arch code which does the same. This fixes a compile warning. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: remove files for building 5.10 kernelNick Hainke2023-05-1213-3843/+0
| | | | | | | | | | | All targets are bumped to 5.15. Remove the old 5.10 patches, configs and files using: find target/linux -iname '*-5.10' -exec rm -r {} \; Further, remove the 5.10 include. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath25: switch default kernel to 5.15Nick Hainke2023-05-121-2/+1
| | | | | | | | | | | | Switch to kernel 5.15 although it is marked as source only. It is marked as source only because nobody was able to test this device. Merging this is important to finally branch a new release. We want to get rid completely of 5.10 kernel. Without this commit we get following error: "Missing kernel version/hash file for 5.10." Hopfully someone will fix the board in the rc phase or it will be removed completly. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath25: 5.15: enable 5.15 testing kernelNick Hainke2023-05-1211-46/+61
| | | | | | | | | | | | | | | | | | | | | | | Manually refreshed: - 140-redboot_boardconfig.patch - 141-redboot_partition_scan.patch - 142-redboot_various_erase_size_fix.patch Automatically refreshed: - 107-ar5312_gpio.patch - 108-ar2315_gpio.patch - 110-ar2313_ethernet.patch - 120-spiflash.patch - 130-watchdog.patch - 330-board_leds.patch Use "make kernel_oldconfig" to refresh the new kernel config. The Ubiquiti Nanostation 2 (XS2) and Ubiquiti Nanostation 5 (XS5) should be marked as broken when switching to 5.15 by default. The new kernel does not fit anymore into the partition. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath25: 5:15: copy config and patch from 5.10Nick Hainke2023-05-1213-0/+3843
| | | | | | Copy config and patch from kernel 5.10 to kernel 5.15. Signed-off-by: Nick Hainke <vincent@systemli.org>
* treewide: replace wpad-basic-wolfssl defaultRosen Penev2023-02-041-1/+1
| | | | | | | The newly merged mbedtls backend is smaller and has fewer ABI related issues than the wolfSSL one. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath25: mark as source-onlyRobert Marko2023-01-301-1/+1
| | | | | | | | | | | | | | | ath25 seems to be a target with low number of users according to download statistics, most of which are for older releases anyway. Users that we managed to find are currently building images downstream as due to low amount of RAM (32MB) default config will not work. Target also suffers from inability for the 5.15 kernel bump to be tested which is a requirment for the next release. So, for those reasons, lets mark it as source-only so that Buildbots dont use the resources for building the images for this target anymore. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath25: add generic subtargetChristian Marangi2022-12-232-0/+2
| | | | | | | Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kernel: bump 5.10 to 5.10.137Petr Štetiar2022-08-233-12/+12
| | | | | | | | | | Removed following upstreamed patch: * bcm53xx: 081-next-ARM_dts_BCM53015-add-mr26.patch All other patches automagically rebased. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath25: fix initramfs image generationLech Perczak2022-08-131-0/+3
| | | | | | | | | | | | | | | | Commit 21f460a5dbef ("ath25: fix duplicate LZMA compression") changed the way kernel images are generated, affecting initramfs images instead. Initramfs images were previously ELF images, and by mistake this change caused the raw kernel image to be used as a source. This caused them to be non-loadable by bootloaders. Restore the previous KERNEL_INITRAMFS recipe and adjust KERNEL_INITRAMFS_NAME to point at the correct source artifact. While at that, adjust KERNEL_INITRAMFS_SUFFIX to -kernel.elf, so it matches the suffix of non-initramfs kernel artifact. Fixes: 21f460a5dbef ("ath25: fix duplicate LZMA compression") Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath25: fix ELF image generationLech Perczak2022-08-131-1/+1
| | | | | | | | | | | | Commit 21f460a5dbef ("ath25: fix duplicate LZMA compression"), when attempting to restore ELF artifact generation, copiedover the raw kernel image twice. Because of that, the .elf artifact was actually a duplicate of raw image. Fix that by copying over .elf suffixed kernel image instead. Fixes: 21f460a5dbef ("ath25: fix duplicate LZMA compression") Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: Activate CONFIG_GPIOLIB in generic configurationHauke Mehrtens2022-08-101-1/+0
| | | | | | | | All targets expect the malta target already activate the CONFIG_GPIOLIB option. Move it to generic kernel configuration and also activate it for malta. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-241-0/+2
| | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.120John Audia2022-06-061-2/+2
| | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800, x86/64 Signed-off-by: John Audia <therealgraysky@proton.me>
* generic: 5.15: rework hack patchAnsuel Smith2022-03-271-0/+8
| | | | | | | | Rework hack patch in dir for kernel 5.15. For the specific patch of packet mangeling introduce a new extra_priv_flags as we don't have enough space to add additional flags in priv_flags. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ath25: drop Linux 5.4 supportRui Salvaterra2022-02-1713-3843/+0
| | | | | | We've been bumped to 5.10, no need to carry this stuff anymore. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ath25: switch to 5.10 KernelPaul Spooren2022-02-101-1/+1
| | | | | Tested-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Paul Spooren <mail@aparcar.org>
* ath25: add kernel 5.10 supportSergey Ryazanov2021-12-2714-0/+3843
| | | | | | | | | | | | | | | | | | Copy and refresh patches and config from 5.4 to 5.10. Most patches require no more then automatic refresh. The only exception is the Ethernet driver patch, which requires some more work: * drop eth_change_mtu() usage since it was removed from the kernel, it anyway useless for drivers that utilizes alloc_etherdev(); * add the txqueue number argument to the .ndo_tx_timeout callback function; * replace ioremap_nocache() which was finally removed from the kernel by the ioremap() with the same behaviour. Switch target to the new kernel version. Signed-off-by: Daniel Golle <daniel@makrotopia.org> [use KERNEL_TESTING_PATCHVER for now] Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* ath25: refresh kernel 5.4 configSergey Ryazanov2021-12-271-54/+2
| | | | | | | | | | | | The target config require some refresh due to the just introduced filtering of the "run-time" options, MIPS eBPF JIT backporting, and so on. The configuration is easily updated using make kernel_oldconfig. So let's update it now in preparation for v5.10 support to reduce the new kernel configuration diff. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* Move mvswitch 88E6060 driver to the ath25Sergey Ryazanov2021-12-273-0/+614
| | | | | | | | | | | | | | | | | | | | | | ath25 requires a 88E6060 driver to support boards such as Fonera 2.0g (FON2202). The swconfig based mvswitch driver has not yet been ported to the 5.10 kernel as the only user is the ath25 target while all other targets have been switched to the upstream DSA implementation. Switching ath25 to the DSA implementation is a complex task, since we need either per-board platform data or DTS support. ath25 lacks both of them and builds only a single generic image. So we need to keep the swconfig driver implementation to easly and quickly port ath25 to the 5.10 kernel. Since porting the mvswitch driver to 5.10 as a generic driver is not an option, and since the ath25 is its only user, make mvswitch a target specific driver to be able to port it to the 5.10 kernel as part of the kernel version update of the target. This will allow us quickly migrate to the next kernel version and not delay the next firmware release. Suggested-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: bump 5.4 to 5.4.154John Audia2021-10-211-1/+1
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.132John Audia2021-07-173-12/+12
| | | | | | | | | | | | | | | Manually rebased: layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: Activate FORTIFY_SOURCE for MIPS kernel 5.4Hauke Mehrtens2021-04-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_FORTIFY_SOURCE=y is already set in the generic kernel configuration, but it is not working for MIPS on kernel 5.4, support for MIPS was only added with kernel 5.5, other architectures like aarch64 support FORTIFY_SOURCE already since some time. This patch adds support for FORTIFY_SOURCE to MIPS with kernel 5.4, kernel 5.10 already supports this and needs no changes. This backports one patch from kernel 5.5 and one fix from 5.8 to make fortify source also work on our kernel 5.4. The changes are not compatible with the 306-mips_mem_functions_performance.patch patch which was also removed with kernel 5.10, probably because of the same problems. I think it is not needed anyway as the compiler should automatically optimize the calls to memset(), memcpy() and memmove() even when not explicitly telling the compiler to use the build in variant. This increases the size of an uncompressed kernel by less than 1 KB. Acked-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: switch the timer frequency to 100 HzRui Salvaterra2021-04-211-2/+0
| | | | | | | | Some targets select HZ=100, others HZ=250. There's no reason to select a higher timer frequency (and 100 Hz are available in every architecture), so change all targets to 100 Hz. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: remove execute bit and shebang from board.d filesAdrian Schmutzler2021-03-062-2/+0
| | | | | | | | | | | | | | | | So far, board.d files were having execute bit set and contained a shebang. However, they are just sourced in board_detect, with an apparantly unnecessary check for execute permission beforehand. Replace this check by one for existance and make the board.d files "normal" files, as would be expected in /etc anyway. Note: This removes an apparantly unused '#!/bin/sh /etc/rc.common' in target/linux/bcm47xx/base-files/etc/board.d/01_network Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: rename IMAGE_PREFIX/IMAGE_NAME to DEVICE_IMG_*Adrian Schmutzler2021-02-251-1/+1
| | | | | | | | | | | | | | We so far had two variables IMG_PREFIX and IMAGE_PREFIX with different content. Since these names are obviously quite confusing, this patch renames the latter to DEVICE_IMG_PREFIX, as it's a device-dependent variable, while IMG_PREFIX is only (sub)target-dependent. For consistency, also rename IMAGE_NAME to DEVICE_IMG_NAME, as that's a device-dependent variable as well. Cc: Paul Spooren <mail@aparcar.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: use SPDX license identifiers on MakefilesAdrian Schmutzler2021-02-103-12/+5
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.86Adrian Schmutzler2021-01-011-1/+1
| | | | | | | | | | | | | | | | | Removed upstreamed patches: pending-5.4/499-mtd-parser-cmdline-Fix-parsing-of-part-names-with-co.patch Manually merged: pending-5.4/611-netfilter_match_bypass_default_table.patch layerscape/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/{generic,tiny}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64 Run-tested: ipq806x/R7800, realtek Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org>
* ath25: fix preinit Ethernet port configurationSergey Ryazanov2020-09-101-7/+2
| | | | | | | | | | | | | | | | | vconfig is no more installed by default to a firmware image. So, replace vconfig calls for VLAN subinterface configuration by coresponding ip-link commands. Also drop few useless comments from the preinit hook script, while we are at it. I have no chance to test this fix since I have no board with a subject switch IC, but this is still better then call an utility that is unavailable in the firmware for years. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> [use documented syntax for ip link add] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath25: disable devices with 4M flashAdrian Schmutzler2020-09-061-0/+2
| | | | | | | | Devices with 4M flash are not built be default for 20.xx anymore. Building them with buildbot settings does not work anymore anyway. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath25: apply vendor_model schemeAdrian Schmutzler2020-09-061-13/+13
| | | | | | | This applies the vendor_model scheme for this target as well, so naming is consistent throughout supported targets. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath25: eth: fix crash on skb DMA (un-)mapSergey Ryazanov2020-09-062-9/+11
| | | | | | | | | AR2315 Ethernet driver pass NULL instead of a real device pointer to DMA (un-)map calls. With kernel version 5.4 such behaviour causes a kernel panic. Fix this issue by preserving device pointer during the probe procedure and pass it to each skb data DMA (un-)map call. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* ath25: fix ethernet supported link modes for ar2313Sergey Ryazanov2020-09-061-10/+10
| | | | | | | | | | | | | | | Rework ethernet supported link modes to linkmode bitmask. This is needed to suppress compilation errors: drivers/net/ethernet/atheros/ar231x/ar231x.c:1153:20: ... error: assignment to expression with array type phydev->supported &= (SUPPORTED_10baseT_Half ^~ Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> [cut out of bigger patch, adjust commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath25: fix compilation for AR2315 MTD driverAdrian Schmutzler2020-09-061-4/+1
| | | | | | | | | | Kernel commit e7bfb3fdbde3 ("mtd: Stop updating erase_info->state and calling mtd_erase_callback()") removed erase_info->state updates and calls of mtd_erase_callback(). Drop these erase callback invocations from AR2315 MTD driver as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath25: update config for kernel 5.4Adrian Schmutzler2020-09-061-31/+42
| | | | | | Update config with make kernel_oldconfig. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath25: refresh patches for kernel 5.4Adrian Schmutzler2020-09-068-51/+51
| | | | | | Refresh patches to make them apply to kernel 5.4. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath25: add back target supportAdrian Schmutzler2020-09-0619-0/+4170
| | | | | | | | | | | | Discussion on the mailing list reveals that this target has active users. As we are finally able to upgrade this target to kernel 5.4, add it back to master. This reverts commit 7d29a5571403 ("ath25: drop target") and immediately moves the relevant files to 5.4, without touching the content. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath25: drop targetAdrian Schmutzler2020-09-0219-4170/+0
| | | | | | | | | | | | | This target still only works with kernel 4.14, and not so recent attempts of getting newer kernel versions supported did not lead to success. Therefore, drop the target, as we are already two LTS kernel versions ahead and it does not seem like anybody will pick up the work. Patchwork series: https://patchwork.ozlabs.org/project/openwrt/list/?series=169991&state=* Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: use wpad-basic-wolfssl as defaultPetr Štetiar2020-08-201-1/+1
| | | | | | | | | | | | | | | In order to support SAE/WPA3-Personal in default images. Replace almost all occurencies of wpad-basic and wpad-mini with wpad-basic-wolfssl for consistency. Keep out ar71xx from the list as it won't be in the next release and would only make backports harder. Build-tested (build-bot settings): ath79: generic, ramips: mt7620/mt76x8/rt305x, lantiq: xrx200/xway, sunxi: a53 Signed-off-by: Petr Štetiar <ynezz@true.cz> [rebase, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: unify CONFIG_GPIO_SYSFS in kernel configsFelix Fietkau2020-08-061-1/+0
| | | | | | Enable it for all platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target: replace remaining occurrences of ifconfig with ipAdrian Schmutzler2020-08-031-4/+5
| | | | | | | | | | | ifconfig is effectively deprecated for quite some time now. Let's replace the remaining occurrences for our target setup by the corresponding ip commands now. Note that this does not touch ar71xx, as it will be dropped anyway, and changing it would only make backports harder. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: mark devices as BROKEN instead of commenting outPetr Štetiar2020-07-301-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the newly introduced BROKEN flag to a bunch of devices that previously just had TARGET_DEVICES commented out. By this, we can select them in make menuconfig when BROKEN developer config option is selected, instead of having to edit the code. In contrast to DEFAULT := n, this is meant to cover devices that don't boot or don't compile at all. ath25: np25g, wpe53g both disabled during kernel bump 3.18->4.4 without reason given f89a20a89aeb ("ath25: update kernel from 3.18 to 4.4") bcm53xx: linksys-ea6300-v1, linksys-ea9200, linksys-ea9500 broken due to insufficient/broken TRX support 55ff15cfd509 ("bcm53xx: disable building Linksys EA6300 V1 image") cd0f9900a4cd ("bcm53xx: parepare for building more Linksys images") bcm63xx: tplink-archer-c5-v2, tplink-archer-c9-v1 disabled when kernel 5.4 support was added, probably broken 50c6938b95a0 ("bcm53xx: add v5.4 support") Signed-off-by: Petr Štetiar <ynezz@true.cz> [limit to subset of devices, use BROKEN, adjust commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: drop shebang from non-executable target filesAdrian Schmutzler2020-06-161-2/+0
| | | | | | | | | | | | | | This drops the shebang from all target files for /lib and /etc/uci-defaults folders, as these are sourced and the shebang is useless. While at it, fix the executable flag on a few of these files. This does not touch ar71xx, as this target is just used for backporting now and applying cosmetic changes would just complicate things. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove maintainer variable from targetsPetr Štetiar2020-03-161-1/+0
| | | | | | | | | | | | | There is no such role as target maintainer anymore, one should always send corresponding changes for the review and anyone from the commiters is allowed to merge them or eventually use the hand break and NACK them. Lets make it clear, that it is solely a community doing the maintenance tasks. Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel: bump 4.14 to 4.14.171Koen Vandeputte2020-02-241-1/+1
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2013-1798 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath25: split up DEVICE_TITLEMoritz Warning2019-10-191-1/+2
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* treewide: sysupgrade: use $UPGRADE_BACKUP to check for backupRafał Miłecki2019-09-111-1/+1
| | | | | | | Now that $UPGRADE_BACKUP is set conditionally there is no need to check the $UPGRADE_OPT_SAVE_CONFIG anymore. All conditions can be simplified. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>