aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/at91
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.103Rui Salvaterra2022-03-05147-1524/+512
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* at91: remove pm debug features from sama5 kernel configClaudiu Beznea2022-02-261-4/+0
| | | | | | | | | | Remove PM debug features from sama5 kernel config. It is not necessary to have it on production code. This also fixes the build for sama5 target after commit 97158fe10e60 ("kernel: package ramoops pstore-ram crash log storage) Fixes: 97158fe10e60 ("kernel: package ramoops pstore-ram crash log storage") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama7g5-ek boardClaudiu Beznea2022-02-243-4/+62
| | | | | | | | | | | | | | | | | | | | | | Add support for SAMA7G5-EK board. Hardware: - SoC: SAMA7G5 - RAM: Aliance Memory AS4C256M16D3LC (4 Gbit DDR3L) - SD/MMC: 1 standard 4bit SD Card interface - USB: 1 Micro-AB host/device, 1 Type-A host, 1 Type-C host - CAN: 2 interfaces - Ethernet: 10/100 port, 1Gbps port - Wi-Fi/BT: 1 optional interface - Audio: 1 SPDIF RX port, 1 SPDIF TX port, 4 digital microphones - Camera: 1 RPi CSI camera interface - Debug: 1 J-Link-OB + CDC, 1 JTAG - LEDs: 1 RGB - Buttons: 4 push buttons - Expansions: 1 RPi Expansion connector, 2 mikroBUS connectors - Power management: 1 power management IC, 1 power consumption measurement device Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add kernel support for sama7g5 socClaudiu Beznea2022-02-24152-7/+20714
| | | | | | | | | | | | | | | | Add kernel support for SAMA7G5 by back-porting mainline kernel patches. Among SAMA7G5 features could be remembered: - ARM Cortex-A7 - double data rate multi-port dynamic RAM controller supporting DDR2, DDR3, DDR3L, LPDDR2, LPDDR3 up to 533MHz - peripherals for audio, video processing - 1 gigabit + 1 megabit Ethernet controllers - 6 CAN controllers - trust zone support - DVFS for CPU - criptography IPs Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: drop /etc/config/firewallPaul Spooren2022-01-151-6/+0
| | | | | | | | | | The file can't be part of base files or the base-files and firewall packages collide. Two packages must not provide the same config files without having a defined CONFLICT since it would result in an undeterministic config state depending on what package is installed last. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: filter out both Clang and LLD versionsSergey Ryazanov2021-12-172-2/+0
| | | | | | | | Both CLANG_VERSION and LLD_VERISON are autogenerated runtime configuration options, so add them to the kernel configuration filter and remove from generic and per-target configs to keep configs clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* kernel: Set some options in generic configurationHauke Mehrtens2021-11-022-2/+0
| | | | | | | Add CONFIG_USB_ETH and CONFIG_PWM_JZ4740 to generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91: add support for sam9x60-ek boardClaudiu Beznea2021-10-241-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAM9X60-EK board. Hardware: - SoC: SAM9X60 - RAM: Winbond W972GG6KB-25 (2Gbit DDR2) - NAND Flash: Micron MT29F4G08ABAEA - QSPI Flash: Microchip SST26VF064B - EEPROM: Microchip 24AA02E48 - SDMMC: One standard 4-bit SD card interface - USB: two stacked Type-A connectors with power switches, one micro-B USB device - CAN: 2 interfaces (Microchip MCP2542) - Ethernet: one 10/100Mbps - WiFi/BT: one optional WiFi/Bluetooth interface - Audio: one ClassD port - Display: one 24-bit LCD interface - Camera: one 12-bit image sensor interface - IO: one IO expander (Microchip MCP23008) - Debug ports: one J-Link-OB + CDC, one JTAG interface - Leds: one RGB LED - Buttons: 4 push button switches - Expansion: one PIO connector, one mikrobus connector - Power management: two power regulators, two power consumption measurement devices Flashing: - follow the procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sam9x60EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: enable kernel config for sam9x60Claudiu Beznea2021-10-241-2/+27
| | | | | | Enable kernel config for SAM9X60. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d27-wlsom1-ek boardClaudiu Beznea2021-10-241-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D27 WLSOM1-EK board. Hardware: - SIP: SAMA5D27C-LD2G-CU including SAMA5D27 MPU and 2Gbit LPDDR2-SDRAM - MMC: one standard SD card interface - Flash: 64 Mb serial quad I/O flash memory (SST26VF064BEUIT-104I/MF) with embedded EUI-48 and EUI-64 MAC addresses - USB: one USB device, one USB host one HSIC interface - Ethernet: 1x10/100Mbps port - WiFi/BT: IEEE 802.11 b/g/n Wi-Fi plus Bluetooth (Wi-Fi/BT) module (ATWILC3000-MR110UA) - Crypto: one ATECC608B-TNGTLS secure element - Video: one LCD RGB 18-bit interface, one ISC 12-bit camera interface - Debug port: one JTAG interface, one UART interface, one WILC UART interface - Leds: one RGB LED - Buttons: start, reset, wakeup, user buttons - Expansion: one tamper connector, one mikrobus interface, 2 XPRO PTC connector - Power managament: PMIC (MCP16502) Flashing: - follow procedure at [1] [1] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d27WLSom1EKMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: add support for sama5d2 icp boardClaudiu Beznea2021-10-241-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SAMA5D2 ICP board. Hardware: - SoC: SAMA5D27 - RAM: 512 MB DDR3L - MMC: One stanard SD card interface - USB: One USB host switch 4 ports with power switch, One USB device type Micro-AB - CAN: 2 interfaces - Ethernet: One Gigabit Ethernet PHY through HSIC, One ETH switchport, One EtherCAT interface - WiFi/BT: Footprint for IEEE 802.11 b/g/n Wi-Fi plus Bluetooth module (Wi-Fi/BT), suitable for Microchip WILC3000-MR110CA or WILC3000-MR110UA - Debug port: One J-Link-OB/J-Link-CDC, one JTAG interface - Leds: one RGB LED - Buttons: reset, wakeup, 2 user buttons - Expansion: one PIOBU/PIO connector, 3 mikrobus sockets - Power mangament: PMIC (MCP16502), one power consumption device (PAC1934) Not working in Linux: - EtherCAT interface: there is no Linux support integrated - PAC1934: driver available at [1] but not integrated in Linux Flashing: - follow the procedure at [2] [1] https://ww1.microchip.com/downloads/en/DeviceDoc/pac193x_linux_driver.zip [2] https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d2IcpMainPage#Create_a_SD_card_with_the_demo Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: enable specific sam9x kernel config flagsClaudiu Beznea2021-10-241-6/+106
| | | | | | Enable specific sam9x kernel config flags. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* at91: kernel: bump to 5.10Claudiu Beznea2021-10-2414-779/+109
| | | | | | | | | | | | Bump at91 targets to kernel v5.10. With this patches and files for wb45n and wb50n were removed as they are now included in upstream kernel. Along with: - this the kernel config for sama5d2 and sam9x targets has been refreshed (with make kernel_menuconfig + save); - CONFIG_ARCH_AT91 and specific sam9x SoCs (AT91RM9200, AT91SAM9, SAM9X60) has been enabled such that sam9x SoCs to be able to boot. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
* kernel: move some drm symbols to generic configTomasz Maciej Nowak2021-06-131-1/+0
| | | | | | These are architecture independent, so move them to generic config. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* treewide: switch the timer frequency to 100 HzRui Salvaterra2021-04-212-4/+0
| | | | | | | | Some targets select HZ=100, others HZ=250. There's no reason to select a higher timer frequency (and 100 Hz are available in every architecture), so change all targets to 100 Hz. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: remove redundant ubifs kconfig symbolsRui Salvaterra2021-04-211-4/+0
| | | | | | | For the targets which enable ubifs, these symbols are already part of the generic kconfigs. Drop them from the target kconfigs. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: make AddDepends/usb-serial selectiveAdrian Schmutzler2021-03-061-2/+2
| | | | | | | Make packages depending on usb-serial selective, so we do not have to add kmod-usb-serial manually for every device. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove execute bit and shebang from board.d filesAdrian Schmutzler2021-03-061-1/+0
| | | | | | | | | | | | | | | | So far, board.d files were having execute bit set and contained a shebang. However, they are just sourced in board_detect, with an apparantly unnecessary check for execute permission beforehand. Replace this check by one for existance and make the board.d files "normal" files, as would be expected in /etc anyway. Note: This removes an apparantly unused '#!/bin/sh /etc/rc.common' in target/linux/bcm47xx/base-files/etc/board.d/01_network Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91: use SPDX license identifiers on DTS filesAdrian Schmutzler2021-02-105-10/+10
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: use SPDX license identifiers on scriptsAdrian Schmutzler2021-02-101-5/+1
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: use SPDX license identifiers on MakefilesAdrian Schmutzler2021-02-103-12/+5
| | | | | | Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: provide global default for SUPPORTED_DEVICESAdrian Schmutzler2021-01-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The majority of our targets provide a default value for the variable SUPPORTED_DEVICES, which is used in images to check against the compatible on a running device: SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) At the moment, this is implemented in the Device/Default block of the individual targets or even subtargets. However, since we standardized device names and compatible in the recent past, almost all targets are following the same scheme now: device/image name: vendor_model compatible: vendor,model The equal redundant definitions are a symptom of this process. Consequently, this patch moves the definition to image.mk making it a global default. For the few targets not using the scheme above, SUPPORTED_DEVICES will be defined to a different value in Device/Default anyway, overwriting the default. In other words: This change is supposed to be cosmetic. This can be used as a global measure to get the current compatible with: $(firstword $(SUPPORTED_DEVICES)) (Though this is not precisely an achievement of this commit.) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: do not disable LED triggers in target configSungbo Eo2021-01-151-1/+0
| | | | | | | Those targets have already enabled some other LED triggers, so enabling a few more won't be a big problem. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: enable CONFIG_LEDS_TRIGGER_HEARTBEATSungbo Eo2021-01-151-1/+0
| | | | | | | | | | The heartbeat trigger is used by luci-mod-system, which is installed as a part of the standard luci package set. It seems the LED trigger will be required quite often, so let's enable it by default. This increases uncompressed kernel size by about 100 bytes on ath79/generic. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: move some disabled symbols to genericAleksander Jan Bajkowski2020-12-221-1/+0
| | | | | | Move some disabled config options found in lantiq target to generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* at91: explicitly set CONFIG_USB_SUPPORT for sam9x subtargetAdrian Schmutzler2020-08-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The at91 target sets FEATURES:=usb usbgadget ... in the target Makefile, which sets CONFIG_USB_SUPPORT=y in the .config file for both subtargets. However, when building with all kmods, the build fails with the following error message: ERROR: module [...]/drivers/bluetooth/btusb.ko is missing. It appears that only a part of the bluetooth files are compiled. The package depends @USB_SUPPORT. This can be easily healed by adding CONFIG_USB_SUPPORT=y to the sam9x subtarget configuration. Before the 4.14->5.4 bump, the same was also set in the target's config-4.14 file along with several other USB config options that are not reimplemented. Still, it remains a mystery to me why setting the same symbol via target kernel config creates a different result than the feature setting the same symbol in target-metadata.pl. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91: introduce vendor_model scheme and drop board namesAdrian Schmutzler2020-08-257-194/+117
| | | | | | | | | | | | | | This introduces the vendor_model scheme to this target in order to harmonize device names within the target and with the rest of OpenWrt. In addition, custom board names are dropped in favor of the generic script which takes the compatible. Use the SUPPORTED_DEVICES variable to store the compatible where it deviates from the device name, so we can use it in build recipes. While at it, harmonize a few indents as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91: Refresh kernel configHauke Mehrtens2020-08-252-105/+206
| | | | | | | This was done by running: make kernel_oldconfig CONFIG_TARGET=subtarget Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91: change dtb file pathSandeep Sheriker M2020-08-251-5/+2
| | | | | | | | | Changing dtb file path since the dtb files are build in KDIR folder with image- prefix. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com> [remove commented lines] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91: bump linux version to 5.4Sandeep Sheriker M2020-08-2511-1012/+649
| | | | | | | | Move patches to 5.4, put config only in subtarget directories. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com> [refresh patches, add commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91: drop obsolete empty MakefilesAdrian Schmutzler2020-08-172-0/+0
| | | | | | | | | This files have been emptied during subtarget consolidation, but not removed. Remove them now. Fixes: aff084adf339 ("at91: Merge SAMA5 subtargets") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: unify CONFIG_GPIO_SYSFS in kernel configsFelix Fietkau2020-08-061-1/+0
| | | | | | Enable it for all platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: use DEFAULT := n to disable non-broken devicesPetr Štetiar2020-07-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This uses DEFAULT := n on a bunch of devices that previously were "disabled" by commenting out TARGET_DEVICES. This will allow to build them without having to modify the code, but they will not be selected for default build or buildbots. The change is applied to all devices that are not "broken", but suffer from image site limitations or similar, or have been added in the past but never confirmed to run on the device properly: at91: at91-q5xr5: kernel image too big 31aeae077482 ("at91: do not build image for at91-q5xr5") bcm47xx: asus-rt-ac66u: disabled since it was added in 2015 69aefc771fd8 ("brcm47xx: build images for Asus devices") bcm47xx: netgear-wndr3400-vcna, netgear-wnr3500u, netgear-wnr3500-v2-vc added disabled in 2012, but never confirmed to work on devices 5dec9dd3b200 ("brcm47xx: add code to generate images for some netgear devices") bcm53xx: netgear-r8500 added disabled: "start working on Netgear R8500" 3b76c7cf0bdd ("bcm53xx: start working on Netgear R8500") Signed-off-by: Petr Štetiar <ynezz@true.cz> [limit to subset of devices, adjust commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: drop shebang from non-executable target filesAdrian Schmutzler2020-06-162-3/+0
| | | | | | | | | | | | | | This drops the shebang from all target files for /lib and /etc/uci-defaults folders, as these are sourced and the shebang is useless. While at it, fix the executable flag on a few of these files. This does not touch ar71xx, as this target is just used for backporting now and applying cosmetic changes would just complicate things. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: simplify inclusion of subtarget image filesAdrian Schmutzler2020-06-111-6/+1
| | | | | | | | | | | | | | Many target use a repetitive if-include scheme for their subtarget image files, though their names are consistent with the subtarget names. This patch removes these redundant conditions and just uses the variable for the include where the target setup allows it. For sunxi, this includes a trivial rename of the subtarget image Makefiles. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove maintainer variable from targetsPetr Štetiar2020-03-161-2/+0
| | | | | | | | | | | | | There is no such role as target maintainer anymore, one should always send corresponding changes for the review and anyone from the commiters is allowed to merge them or eventually use the hand break and NACK them. Lets make it clear, that it is solely a community doing the maintenance tasks. Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Piotr Dymacz <pepe2k@gmail.com>
* at91: gen_at91_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91: disable legacy PTYs and virtual terminalsDaniel Golle2019-12-091-6/+0
| | | | | | | | | Enabling legacy PTYs causes problems with procd-hotplug. And as this is a headless target, no need to have virtual terminals. Remove corresponding kernel config options, they are disabled in generic kernel config. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* at91: split up remaining DEVICE_TITLE definitionsMoritz Warning2019-10-191-6/+12
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* treewide: replace backticks by $(...) in gen_*_img.sh scriptsAdrian Schmutzler2019-09-291-1/+1
| | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [decapitalized patch subject at submitter's request] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* at91:sam9x: create sdcard imagesSandeep Sheriker M2019-09-211-2/+42
| | | | | | create sdcard images for sam9x25 & sam9x35 ek targets. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91:sama5: create fit imageSandeep Sheriker M2019-09-212-1/+5
| | | | | | | create fit image & add it to sdcard image for sama5 target device. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91/image/sama5.mk: check for sama5d4_xplained deviceSandeep Sheriker M2019-08-171-3/+7
| | | | | | | check for sama5d4_xplained device while copying at91bootstrap binary to sdcard image. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: remove Build/at91-sdcard commandSandeep Sheriker M2019-08-171-35/+0
| | | | | | | remove at91-sdcard build command from Makefile as this is moved to respective subtarget Makefile. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: add uboot environmentsSandeep Sheriker M2019-08-172-1/+24
| | | | | | add uboot environments to sdcard image Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: move at91-sdcard command to sama5.mkSandeep Sheriker M2019-08-171-0/+33
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfigSandeep Sheriker M2019-08-171-3/+7
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: split up DEVICE_TITLEMoritz Warning2019-08-021-19/+39
| | | | | | DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
* at91:renaming subtraget legacy to sam9xSandeep Sheriker M2019-05-306-12/+12
| | | | | | renaming subtraget legacy to sam9x for adding new sam9 soc's Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: Update kernel to version 4.14Hauke Mehrtens2019-05-309-912/+44
| | | | | | | | This adds support for kernel 4.14 to the target and directly make it the default kernel version to use. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Sandeep Sheriker <sandeepsheriker.mallikarjun@microchip.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 03:31:56 +0000