aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: convert tl-wr741nd v1/v2 to new image building code, add ↵Felix Fietkau2015-05-111-4/+68
| | | | | | | | infrastructure for building the loader Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45672
* ar71xx: add platform_pre_upgrade for sysupgradeFelix Fietkau2015-05-101-0/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45667
* ar71xx: add status led found on ew-dorin boardsLuka Perkov2015-05-102-1/+10
| | | | | | Signed-off-by: Catrinel Catrinescu <cc@80211.de> SVN-Revision: 45656
* ar71xx: allow mktplinkfw calls from the new image code to fail (because of ↵Felix Fietkau2015-05-081-3/+2
| | | | | | | | oversized images) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45646
* ar71xx: allow tp-link initramfs images to exceed size limitsFelix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45645
* ar71xx/image: move TPLINK-LZMA image to new build codeFelix Fietkau2015-05-081-66/+361
| | | | | | | | | | | There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties. v2: set correct DEVICE_PROFILES for all images. v2: migrate TP-LINK TL-WR710N v2 which was committed after v1. v2: split very very long line `TARGET_DEVICES +=` into smaller parts Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 45643
* ar71xx: do general formatting on wnr2000-v4Felix Fietkau2015-05-081-43/+52
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45640
* ar71xx: fix spelling, add copyright on wnr2000-v4Felix Fietkau2015-05-081-2/+3
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45639
* ar71xx: add support for Green WAN LED on wnr2000-v4Felix Fietkau2015-05-081-0/+4
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45638
* ar71xx: add support for green LAN LEDS for wnr2000-v4Felix Fietkau2015-05-081-8/+40
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45637
* ar71xx: fix amber WAN LED setting for wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45636
* ar71xx: make WLAN button RFKILL on wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | | | | Users will now be provided with the inherent wifi toggle functionality of /etc/rc.button/rfkill Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45635
* ar71xx: set all buttons to be active_low on wnr2000-v4Felix Fietkau2015-05-081-0/+3
| | | | | | | | | Originally pressing a button would trigger a release state and vice-versa, as observed from hotplug.d. Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45634
* ar71xx: fix ethernet on wnr2000-v4Felix Fietkau2015-05-081-22/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Most people report broken ethernet with upstream. Last year, user "franz.flasch" authored a working mach-file. His patch is outdated so I modernized it. Original patch and user commentary on page 1: https://forum.openwrt.org/viewtopic.php?pid=260861#p260861 I have figured out what the critical differences are between the two that caused upstream ethernet to break. 1) Both ath79_init_mac() functions calls must be invocated before any GMAC init 2) must init GMAC0 before GMAC1 That was enough to get upstream to function, but I wanted to enjoy my confidence having tested franz's patch for a week sucessfully, so I put his whole function in, which only features more differences in order of function calls. An expert should consider these changes, which could pose potential bugs/issues: 1) No longer using the flag AR934X_ETH_CFG_SW_PHY_SWAP in the ath79_setup_ar934x_eth_cfg() call. 2) Possible consequence of no longer explicitly setting ethernet duplex/speed. Review: With this patch, my ethernet and wireless works. Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45633
* ar71xx: track the correct WAN interface on wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45632
* ar71xx: fix LAN portmasks on wnr2000-v4Felix Fietkau2015-05-081-4/+4
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45631
* ar71xx: use a common naming scheme for LEDS on wnr2000-v4Felix Fietkau2015-05-082-16/+16
| | | | | | | | | It is common that the router provider be used rather than product name. One can see this in target/linux/ar71xx/base-files/etc/uci-defaults/01_leds Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45630
* ar71xx: make art partition read only on 16MB ew-dorin boardLuka Perkov2015-05-081-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45627
* ar71xx: fix 82_patch_ath10kFelix Fietkau2015-05-081-2/+2
| | | | | | | | It has been broken since the new ath10k firmware introduced in r44656. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 45624
* ar71xx: fix leds and gpio on wpj344Luka Perkov2015-04-291-15/+13
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45589
* ar71xx: fix sysupgrade for compex-wpj344Luka Perkov2015-04-291-1/+1
| | | | | | | | Moved board to the right magic case. Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 45588
* Add support for Ubiquiti Rocket M XW devicesJohn Crispin2015-04-217-2/+64
| | | | | | | | | This patch adds support for the XW version of the Rocket M series devices manufactured by Ubiquiti, based on the Atheros AR9342 SoC. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 45553
* ar71xx: spi cleanup for ap121, db120, ubnt-xm and ap136John Crispin2015-04-215-131/+28
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 45552
* ar71xx: merge ap81 patches into oneJohn Crispin2015-04-213-117/+3
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 45551
* ar71xx: add TP-LINK TL-WR710N v2John Crispin2015-04-211-1/+3
| | | | | | | | TP-Link TL-WR710n v2 looks like v1, but has less memory (4MB). Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 45538
* ar71xx: refresh patchesLuka Perkov2015-04-207-15/+15
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45528
* ar71xx: add support for compex wpj344Luka Perkov2015-04-209-7/+224
| | | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45527
* ar71xx: Increase RXD/RDV to 2 on OM5P-ANFelix Fietkau2015-04-201-3/+2
| | | | | | | | | | It was reported that OM5P-AN needs not only a delay setting of 1 for RXD/RDV but 2. These was found when testing with a NetGear GS752TP POE switch with a cable length of 50ft and 250ft. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45524
* ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934xFelix Fietkau2015-04-202-0/+27
| | | | | | | | | | | | | | | The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared by the function ath79_setup_ar934x_eth_cfg. Clearing these in the ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they rely on the preset value by the bootloader. Instead another function is introduced which also works on ETH_CFG on AR934x. It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on machines which require special settings. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45523
* ar71xx: add mask and shift for RXD/RDV bits in AR934X register fileFelix Fietkau2015-04-201-1/+5
| | | | | | | | | | | | | The commit r38948 ("ag71xx: add F1E specific feature bit definitions to AR934X register file") introduced definitions for some bits in the RDV/RXD part of the ETH_CFG register of AR934x. These are incomplete because ETH_RXDV_DELAY is specified as 17:16 and ETH_RXD_DELAY is specified 15:14. The original commit only specified the lower bits. The upper bits also have to be unset when the lower bits should only be set. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45522
* ar71xx: Remove TX/RX delay from pll_1000 for OM5P-ANFelix Fietkau2015-04-201-1/+1
| | | | | | | | | | The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY. Othwise the throughput in gigabit mode is heavily reduced. Signed-off-by: Sven Eckelmann <sven@open-mesh.org> SVN-Revision: 45521
* Revert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490)Felix Fietkau2015-04-191-325/+45
| | | | | | | | | Profile definitions need to be checked and fixed before this patch can be applied again. Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45511
* ar71xx/image: remove duplicated rootfs in new tplink initramfs imagesJohn Crispin2015-04-181-4/+14
| | | | | | | | | | The new building code included the rootfs twice when building tplink initramfs images. To make it more readable move initramfs into an own build step Build/mktplinkfw-initramfs. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 45491
* ar71xx/image: move TPLINK-LZMA image to new build codeJohn Crispin2015-04-181-45/+325
| | | | | | | | There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 45490
* ar71xx/image: add template tplink-16mlzmaJohn Crispin2015-04-181-0/+6
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 45489
* ar71xx/image: fix imagesize of template tplink-8mlzmaJohn Crispin2015-04-181-1/+1
| | | | | | | | | The new image size is verified by a running tplink device and checked against mktplinkfw source code. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 45488
* ar71xx: Enable AT803X_PHY to set special flagsJohn Crispin2015-04-141-0/+1
| | | | | | | | | | | Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY requires special flags to work correctly. Otherwise massive packet loss happens with active POE or when switching the link speed from gigabit ethernet to fast ethernet. The generic PHY doesn't have support to change these settings. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45439
* ar71xx: fix ethernet packet loss issues on OM5P-ANJohn Crispin2015-04-141-1/+21
| | | | | | | | | | | | | | | The OM5P-AN boards are suffering from ethernet packet loss when booting with some active POE setups or when switching to Fast Ethernet when previously booted with Gigabit ethernet attached. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV delay in the ETH_CFG register to fix the issue. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45438
* ar71xx: enable LEDs on Hornet-UB X2John Crispin2015-04-092-2/+4
| | | | | | | | | | | None of the LEDs are enabled by default on the Hornet-UB X2 board (the 16/64MB version of the Hornet-UB), because it uses a different board-name ("hornet-ub-x2"); but hornet-ub and hornet-ub-x2 boards are equivalent WRT their LEDs. SIgned-off-by: Joshua Judson Rosen <jrosen@harvestai.com> SVN-Revision: 45328
* kernel: remove ATHEROS_AR{231X,71XX} config symbols from the patchesGabor Juhos2015-04-081-1/+1
| | | | | | | | Those don't exist anymore. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45314
* ar71xx: add user-space support for RB911G-5HPacDGabor Juhos2015-04-074-0/+50
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45300
* ar71xx: add initial support for RB911G-5HPacDGabor Juhos2015-04-074-0/+289
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45299
* ar71xx: routerboot: export extended wlan data via sysfsGabor Juhos2015-04-071-0/+58
| | | | | | | | Export the data to make it accessible from user-space. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45298
* ar71xx: routerboot: add support for extended radio dataGabor Juhos2015-04-074-8/+67
| | | | | | | | | | | | | On newer Mikrotik boards, the radio calibration data is stored differently and uses LZO compression instead of RLE. Update the RouterBOOT helper code to support the new format. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45297
* ar71xx: select RLE_DECOMPRESS directly by the RouterBOOT helper codeGabor Juhos2015-04-074-15/+14
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45296
* ar71xx: fix new mktplinkfw image code - flags for sysupgrade vs factory were ↵Felix Fietkau2015-04-061-2/+2
| | | | | | | | swapped (fixes #19400) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45281
* ar71xx: fix platform device support in the gpio-74x164 driverGabor Juhos2015-03-311-2/+43
| | | | | | | | | Platform device support has been removed from the gpio-74x164 driver in 3.14. Restore that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45203
* ar71xx/mikrotik: disable atnoher two non MikroTik boardsGabor Juhos2015-03-311-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45177
* ar71xx/mikrotik: disable non MikroTik boardsGabor Juhos2015-03-311-0/+32
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45176
* ar71xx/mikrotik: use correct symbol to disable overlayfsGabor Juhos2015-03-311-1/+1
| | | | | | | | The Kconfig symbol has been changed in 3.18. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45175